After 12 years this is still one of our most popular videos! And yes, the times have changed relative to video standards. Yet the 3M 6000 and 7500 half mask respirators remain the most purchased on the market. 3M is the gold standard of consistent quality in respiratory protection. That combines with easy availability for filters and cartridges to make these a solid choice for our customers.
Between the 3M 6000 and 7500 half mask respirators, the 7500 is the clear choice. It does cost more, and that makes deciding which to buy depend on the intended use. If you are going to use just a few times, or maybe are issuing them to a temporary worker, you might want to go the economical route. But if this is for you, and you can handle the higher price, then no question; buy the 7500. You won't be sorry.
I retired from 35 years home renovations 5 years ago. Just washed my old 10+ years 6000 with dish soap, looks brand new. The thin rubber on the valves are still perfect as opposed to another mask that crumbled. Ordered the full face last week, cartridges arriving today. Excellent quality company.
Great comparison. I have a 7502 mask and used it for the last 6 years without any problems or needs of replacement. Here down the Equator where the 7502 costs around 65 dollars, you can't go wrong.
Does yours also do this: sometimes when I breath in slowly the valve is not closing and I can smell the paint, it seems I have to breath in hard for them to close.
Thanks for making this video. 3m's website lacks in real description and use of their products. i just bought a 6500 series with the drop down feature and a 7500. 7500 is the way to go. I like the drop down feature with the 6500 but the upper straps are kind of annoying. They are clearly visible in my lower field of vision, right above my cheeks. I bought both mask to replace a 6000 series that a dog ate. Its okay though, because I was starting to use it enough to notice what I didn't like about it. Plus it started hurting the bridge of my nose. Looks like the 7500 is what i am keeping. The silicon is soft and seals to my face much better.
Same thoughts and im too close for purchasing the 6502QL! im just amazed by the latch part but what i need is the comfort coz im gonna use it a long time in the clinics thank you for this!
The term 'dust' is a little generic to make a recommendation on. The cartridge respirators we sell have a selection of filters to choose from. These filter out particles, much like a strainer. If the particles are toxic, say lead or asbestos, we recommend a P100 (HEPA) filter, such as our 3M 7093. For more common dusts, such as drywall or household, we suggest the 3M 2071, a N95 rated filter. As far as buying in the UK, 3M products are available there. They do have different part numbers.
@phonyization We would use 2 different filters combos. For the welding, grinding and sanding - use the 3M 7093 P100 filter. For the spray painting - use a combination of 3M 6001 cartridge, 5P71 filter and 501 filter retainers. There is a single that would do it all, but I wouldn't suggest it. The 3M 60926 covers all this, but costs $ and once the P100 filter is full (for instance) you are replacing the whole thing. Also, please note we don't recommend this for urethane paints
Thank for the prompt reply. No big difference from the valve but I take it the comfort from the material alone is worth it. I'll definitely look into a 7500 when time for replacement comes. The 6000s don't have replacement parts afterall.
@techrepairTV We generally recommend a P100 filter for the fumes (burnt metal), and then add a layer of charcoal to absorb the acid or rosin core vapors. So the filter would be the 3M part number 2097, and would fit on either the 6000 or 7500 masks. No extra parts to buy.
I am interested to know which filters you would recommend for forest fire smoke and volcanic ash. I see that the CDC recommend N95 for volcanic ash particulates, so 3M 2071 might be enough. Please share any thoughts you might have taking into consideration hyper sensitivity to smoke smells. Thank you!
@@SaltAndCopper The standard recommendation is N95 for volcanic ash and forest fire smoke. An upgrade to this would be using a P100 (HEPA) rated filter, as this is the highest on offer. However, these will not remove the smell, or the toxic witches brew that comes from a forest fire. Out here in the West, seems there is always something more than just wood and brush burning. Cars, garages, and farm outbuildings are just a small sample of what goes up in smoke. It may seem overkill, but for sensitive folks, a combination cartridge such as the 3M 60926 might be warranted. And as a further step, a full face respirator like the 3M 6800. This allows only filtered air to come in contact with your eyes as well.
The valve design is a bit different, in that the air is directed downward as it exits the mask. I can't say that I have noticed a performance difference within the mask. I have worn both styles for many hours doing a variety of jobs. The 7500 is more comfortable without a doubt, and the softer material may offer a better overall fit. Also, being silicone, there is less chance of skin irritation with the 7500 on those folks that are quite sensitive. But the exhaust valve, not really a difference.
For me, it is the opposite. 6000 valve is all good, but it does not perform as well as the 7500 in places where the front of the mask will stay cold, and the intensive workshop job will make exhale a lot of humid air (sometimes, in the form, of a small cloud). This situation makes 7500 shine. Because with every minute of intensive breathing, the valve will get wet. I mean pouring water wet. In the 6000 series, it stays in the valve for a while then drips thru the small slits. In 7500, the breathing condensation simply pours down from the "nose" of the mask. Away, from the face and the user. Also, the material of the facepiece. I saw a 10-year-old shelf (double the expiration time) stored at 7500, and it looked and worked like new. Nine years for the 6000 in the same storage turned its facepiece a bit soft and mushy. We've still used it, but only twice the UV in only three days turned the "out of date" 6000 into unpleasant goo. Any other cases - 6000 is a great product, and for some, it is close to no difference in use with two masks priced like a single 7500.
Great video! Here's my take: ask yourself these two questions: 1) Do I have an allergy to rubber? 2) Am I going to be using this daily (i.e. professionally) and wearing it for extended periods? If the answer to either is 'yes', then buy the 7000 series. It's more comfortable when worn for long periods, and will last longer. For 90% of people, though, they'll be perfectly happy with the 6000 series. If you're just doing a few household projects, the 5000 will be fine, too.
The 3M 6000 half mask is available in 3 sizes; Small, Medium and Large. Small is for a petite woman. Medium fits 75%+ of our customers. Large is for someone with a noticeably large or long face, and sometimes those with a very prominent nose. There are no metrics or measurements. Trying on the mask and fit testing is the only sure way to know.
I bought 7503 mask and neither the handle nor the mask inside was factory wrapped in foil. Only the filters were packed in factory-welded foil. It's normal?
Spraying paint; for this answer, we will say that you are using a solvent based lacquer. Not a urethane paint. You want an organic vapor (charcoal filled) cartridge, such as the 3M 6001. We will then add a pre-filter, such as the 3M 5P71. This catches the paint mist before it gets to the cartridge. Generally, the pre-filter is held on by a retainer. Similar products from 3M are available in th UK.
Well, I'm really late to the party here! You have really convinced me to go with the 7500 for jewellery making. What I'm still stuck on, however, is size. I'm fairly small... 5'2" x 126 lbs. and wear between a small & medium in clothing. I "think" my face is small. I was leaning toward purchasing the small mask, but since more people wear the medium, I'm not sure. Can someone please help me re: sizing???
If you are buying this mask for your own use, I would definitely consider the 3M 7500 mask first. A little more money, but much more comfortable, and if you hang on to it for a while, the cost per use difference is tiny.
I'll think that in general we are talking about 'rattle' spray cans being used for this application. There are several solvents used, but in general they come under 'organic vapors'. I'd recommend the 3M 6001 organic vapor cartridge with a 5P71 prefilter (for the paint solids), held on with a 3M 502 retainer. As usual, we recommend that you try and have adequate ventilation, like you might find on an overpass or bridge abutment. ;-)
I have a 6200 mask Which I have been using for a year with 60923 filters. Turns out that these are vapor filters and I'm using them incorrectly for wood work, sawing ,turning etc. (By the way, it is comfortable). I agree with Johnathan below that the stores have little to no idea on the correct filters to use, maybe because they carry only a couple of types.The labelling on the filters is also very poor. Based on this video I will be contacting PK Safety and buying a 7000 series with the correct filters. I had been about to buy a Trend dust helmet $400, but they have 22% a one star rating on Amazon and I think that 3M is a better simpler way to go.
Hello mate. I am debating between buying two models, the 6500QL or the 7500. Which one would you recommend if in terms of comfort and practicality, it refers to use in welding and tasks such as grinding or plasma cutting, etc..? It would be for use between 5 - 8 hours. Thanks and regards.
We sell these on our site pksafety(dot)com. The 6000 runs 10.65 each, while the 7500 is 23.60 each. Neither one includes filters or cartridges. We have all the popular cartridges and filters for the 3M respirators, and they all fit on either mask.
Household bleach is a diluted chlorine solution. For that we would recommend using the 3M 6006 multi gas vapor cartridge. It fits right on to the mask with a quarter turn. No other parts required. When you put the assembly on, you shouldn't smell or taste the bleach. Once it starts to 'break through' then it is time to change your respirator cartridge. There is no set time limit, and it sounds like your exposure will be minimal, so the 6006 cartridges should last a good while (8-16 hours of use)
Hi, What would you recommend for kids? Are they available? We're not so near a volcano, but we can view it from our place which means we can still be reached by a heavy ashfall.
3m stipulate the 7500 has a different exaust valve design that makes it dryer and cooler inside. Did you find any differences in that matter over the 6000?
3M 6004 cartridges are made to be used in protecting against low levels of ammonia and methylamine, not when using spray paint. For spray paint, lets assume this is a rattle can of standard lacquer or enamel. Added to the basic mask would be a pair of the 3M 6001 organic vapor cartridges, the 3M 5P71 pre-filter, and 3M 501 retainers (to hold the pre-filters on top of the 6001 cartridges). This is the standard 3M paint spray respirator assembly.
Thanks for simple and good explanation I actually have both of them and after reinstalling the cartridge more than 4 or 5 times there is an issue at locking mechanism at 6200 as I usually have problem when I install the cartridge due to that I am not professional but 7500 is more tough and now adays the cost approximately the same at 2020 at my country Egypt during Corona virus but without the cartridge
I have used 6000 for many years until I got a 7500, the 7500 lasts ten times longer, is more comfortable, wlastic head strap lasts ten times longer, more comfortable, doesn't stink with repeated use like the 6000 series. I consider the 6000 series junk, with repeated use over years the 7500 is way cheaper, one mask lasts for years where the 6000 lasts a month or two.
thank you so much, bless you.. i bpought it in a hurry to visit my sites but did not have a time to ask the sales people how to use or , did not want to read the manual. your video is very helpfull. please keep upo the good job
@HighPerformance7uner Hi, This packaging is standard for the industry. The bag is there to protect the product and ensure that it is new and unused. I have not seen brands go to the extent of a 'vacuum seal'. In theory organic vapors can be absorbed out of the air, but in practice it doesn't seem to be a concern. We generally say to keep the cartridges away from solvents (in a zip lock bag for instance), and in the 30+ years I've been doing this, that seems to work.
@skeletonbite The filter change interval will vary depending on how much dust/fumes the filter is exposed to. More dust/less time, less dust/more time. On the plus side, the filter is becoming more efficient as you use it. However, there is a practical limit to this, as the filter will become harder to breathe through. Take care to keep any lead covered items (including the filters) from spreading to other parts of the house. We may suggest the 3M 7093 filter, the filter media is covered. Rick
lmao the 4:3 res of the video got me sceptical but after verification we're in 2021 and those two series of mask are still the most popular, and no 8000 serie in sight yet.
I checked your website and I saw that you also have hard hats. What items would you recommend to pack in case of an earthquake (which is normal here), a volcanic eruption or a nuclear fallout. We're a family of 4, 2 adults 2 kids. Would the small 7500 respirator fit kids age 8-9?
@josiqvideos09 Since you mention paints, I'll guess you have a mask that has organic vapor cartridges (charcoal filled to absorb solvent vapors) and prefilters (white pad held on by a retainer clip). The prefilters are in place to catch dust and mist, such as paint spray mist. They can become clogged over time and use. They can be replaced easily and economically. If you are using the 3M mask as pictured in the video, then I would suggest the 3M 5P71 prefilter. They come in a box of 10. Thank U!
Urethane paints contain (more often than not) an ingredient called isocyanate. This is hazardous to your health. You can neither smell or taste it. It is absorbed to a small extent by organic vapor (charcoal) cartridges. For these reasons, we don't recommend cartridge type respirators for urethane paints. Good ventilation can help, as can changing cartridges frequently (hourly). Professionals use an air line respirator. Clean air directed to your mask thru a hose. This is considered the best.
The size question is a vexing one. There are no metrics to go by. That is, no measurements are reliable in making the choice, so none are published. Here is what we tell our customers; around 70-75% use the Medium size. This has been true for the last few decades of my experience. So if you have what you feel is a notably small face (think petite woman) then Small may be the right choice. On the other hand, if your face is quite large (notably so), then go with the Large size. The best way to actually determine fit is with all 3 sizes in front of you, with preferably more than just one brand choice, and try them on. Then a fit test by one of the common means; Smoke, Saccharin/Bitrex, or banana oil (Isoamyl Acetate). It helps to have a person experienced in this to assist you, but not absolutely necessary.
@pksafetysupply I like to use it for shooting to filter out the minimal vaporized lead, and to for gun cleaner solvent fumes. I've been using the 60923 filter. How many uses do you recommend? I shoot for 1 hour sessions. Also is there a timed expiration? thanks in advance
I have the 3m respirator the one on the left of this video, and i got it and it came with everything but my mates one came with a filter retainer does it matter if i dont have one
The main difference in the exhalation valves are the covers. Both valves are front and center, right where they belong. The 3M 6000 has a protective cover with slots to allow airflow. The 7500 has a plastic covering over the entire valve, with an opening at the bottom. This directs the exhaled air downward. Here are a couple of example benefits from this; automotive spray painters like that the micro water particles the exhaled breath don't hit their work, while abatement workers are able to shower and decontaminate with the water running right off the mask.
You should probably just keep a couple of windows open in the room where you're doing your nails, have a fan moving air, and don't put your face directly over the wet polish (i.e. don't inhale directly). If you really want to be safe, though, just get the 5000 series disposable (or the 6000-series if it happens to be cheaper in your area).
Thank you so much for the review. Do you recommend a particular cartridge or filter to use in terms of COVID-19 ? I had bought the 3M P-100 filters, and 60926 and 60921 (?) cartridges.I read that the P-100 filters can become contaminated with the virus, so not sure what to do now. Thanks for any recommendations.
4 ปีที่แล้ว
I recommend fresh air and exercise for covid-19...
It's unlikely the virus would make it all the way through the mask even if it became contaminated internally. Be sure you store and clean all equipment properly. Also for COVID 19 as far as laws and rules go in area's where you are required to wear a mask these would not be approved, they do not filter outgoing air, which is what mask are mainly being pushed for. So if you have covid and you wear this, it will keep spreading covid every time you exhale. You could I suppose tape a filter or mask to the exhaust vent with medical tape but I dunno. Though it can't be recommended many people will keep using them until it becomes too difficult to breath then replace them. Obviously not legally binding advice and ask a professional before you do anything.
@@goodman854 If someone has COVID and wears these respirators with their exhalation valves sealed shut he/she will definitely die due to suffocation. So instead of these respirators with P100 filters they can wear non valved N95 respirators or FFP2 masks e.g. 3M Vflex 9105 N95 or 3M Aura 9320A+ or 3M Aura 1870 or just put a surgical mask if their oxygen level is too low and suffering suffocation.
The downward facing exhaust valve has it's best use in automotive painting, and the like. If the surface finish is critical, and you get up and close during application, you'll be glad the airflow and moisture aren't going straight into your work. For other jobs, when you start working hard, the moisture can become pronounced. Once again, having it exit or drip down may be a benefit.
i like your instruction video's, very useful if you're new to that stuff... i would be very interessted in buying the 7500 mask from you with enough filters but i'm abit confused right now which one to use...? i work alot on custom bikes and cars which include mostly arc welding,grinding steel and stainless steel,fiberglass/resin work, sanding filler/wood and painting does a 3m filter exist which will protect me for all of those works?
I'm new to this shit so can someone please reply answering this... If I get the 7500: Is it safe to use spray paint with? (Graffiti) How often do i need to replace the filters? Eventually will the actual mask part have to be thrown out and if so how long until?
Daggers | SUB TO BECOME A DAGGER!! Using the Small size (p/n 7501), will likely fit. Only sure way to tell is to try one on, and better yet, do a fit test.
It doesn't seem like wearing a respirator is breaking the law? It certainly is more common to see a typical dust mask, such as the 3M 8210, or a surgical mask. With the current virus scare, there may be many more people wearing masks. It is good to note that any mask with an exhalation valve will expel unfiltered air. So if you are the person who is sick, the droplets will escape the mask.
@@hmmdoh7835 Not sure what to tell you. This is a choice, and only you can weigh the factors. If there is deep concern, a surgical or N95 mask may seem more appropriate?
@pksafetysupply Hello! Im trying to order on your website, and on the drop down menu where you pick your country, there is no Canada. Is there onther way I can order? Thanks
When it comes to respirator sizing, there are no specific metrics. No length, circumference or ratio. From long experience we know that approximately 70% or more of users will fit the medium size. So if your face is noticeably larger or longer than average, choose size large. Also, a very prominent nose can effect this. On the other hand, a person with a quite small or petite face should choose the small. Other than actually trying the mask on, that is all the guidance we can offer.
3m needs to step up the f'cking pr game..thanks for explaing this! I wish i had seen it a week ago. the price diff was only like 4 bucks but i was in a rush and it wasnt stupid easy to confirm which was better/ what carriages the 7000 took/which was better. part amazons fault but google must have found an old page or they are truly not selling this right (might explain your sales of 6500 )because even 3ms website wasnt in your face easy. 6500 looked more rugged and had more reviews to. is 3m so big they just dont give a shit about marketing any more? one amazon vender had a table but it was missing 7k series. is 7k compatible with welding mask? also i know the argument is for full face if i ever want to use it for mold..but will something like magenta tan for chemicals handle mold too or is there a better particulate filter to get?
Which one does breath easier? I bought another brand and it has a large resistance to in- and exhaling and the outlet valve flutters all the time...a real dud
The breathing resistance between these models is essentially identical. A major factor is the filter or cartridge. Some brands flow easier than others, though this is not something that is regularly measured and reported by manufacturers. 3M is the largest and arguably most trusted brand in respiratory protection. Between the 3M 6000 and 7500, the big difference is the comfort. The 7500 has a softer silicone based facepiece, and cost aside is the preferred choice.
+Will Gilpin The mask, when fitted with the correct filters will meet or exceed the PM2.5 requirements. The US spec P100 (HEPA) filters are rated 99.9% effective against particles 0.3 microns and larger. The PM2.5 standard refers to particles 2.5 microns and larger. With this mask, we would recommend either the 3M 2091 or 3M 7093 filters.
@@Mikkel111 We do not make any recommendations for masks or filters regarding viruses or other health issues. We do reference the CDC recommendation of N95. They have details on their web site.
@@raymadani270 Right back at you. A face-cover is barely able to filter out outside pathogens. But it is able to filter the outside from you. Also, a HEPA/ULPA-filter is capable of filtering the pathogen itself. Last but not least, the comment you answered is older than a year. So please check the date, buddy.
Yes, you definitely can talk. However, the sound is quite muffled. If the background noise is pretty quiet, communicating is possible. Just have to speak slow and clear. Clearly not the preferred way to share a conversation.
Of course ,it is illegal to price gouge respirator masks during the pandemic.It's being done widely, but is illegal. A price gouger in my area has been sentenced to prison for price gouging PPE.
The 3M 6000 and 7500 masks have no harmful ingredients. The straps are even latex free. There is the possibility that some folks have extreme sensitivity to chemical vapors of any kind. In that case we recommend the 3M 7500, as the silicone rubber is inert, and offers the best chance of avoiding this rare occurrence.
For daily cleaning, wipe with an antiseptic PPE wipe. For more cleaning, you can clean in warm water with a mild detergent. Use a soft brush to clean the mask. The masks can be taken apart, which you must do carefully. Rinse in a mild disinfecting solution. After cleaning, rinse and dry with a clean cloth. Allow to air dry before re-assembling. After assembly, wipe with an antiseptic PPE wipe. You can get instructions for the masks here: solutions.3mcanada.ca/wps/portal/!ut/p/a0/04_Sj9CPykssy0xPLMnMz0vMAfGjzOJDDQx8LZwMHQ38DfwMDDxNzYINHAMDPQ0tzfSDU_PinR31C7IdFQEOHRSi/
You should have mentioned the down air exhaust to keep your googles from fogging up on the more expensive model... I can't stand fogged up goggles or classes.
Right you are. An oversight on my part. However, my observation has been that the front exhaust has minimal impact on fogging. Rather, the downward exhaust is very helpful in painting. Droplets of water, condensed from your breath, can negatively impact paintwork in progress. This has been a particular problem in automotive refinishing.
11 years later and still providing value with this video as I go shopping for a new half face mask. Thank you!
which model did you get? 6500 or 7500
12 years later, this is the best video explaining still, wow!
After 12 years this is still one of our most popular videos! And yes, the times have changed relative to video standards. Yet the 3M 6000 and 7500 half mask respirators remain the most purchased on the market. 3M is the gold standard of consistent quality in respiratory protection. That combines with easy availability for filters and cartridges to make these a solid choice for our customers.
Between the 3M 6000 and 7500 half mask respirators, the 7500 is the clear choice. It does cost more, and that makes deciding which to buy depend on the intended use. If you are going to use just a few times, or maybe are issuing them to a temporary worker, you might want to go the economical route. But if this is for you, and you can handle the higher price, then no question; buy the 7500. You won't be sorry.
I retired from 35 years home renovations 5 years ago.
Just washed my old 10+ years 6000 with dish soap, looks brand new. The thin rubber on the valves are still perfect as opposed to another mask that crumbled. Ordered the full face last week, cartridges arriving today. Excellent quality company.
Anyone else watching in 2020 in preparation for 2019-nCoV?
Mikkel Nielsen indeed
yes! do you think this would work ok?
Ryu Sf Yep. Get the 6000-series and depending on whether you live in EU or US, buy P3 or P100 filters.
is n95 do well on it?
ma nai I bought 6035
Great comparison. I have a 7502 mask and used it for the last 6 years without any problems or needs of replacement. Here down the Equator where the 7502 costs around 65 dollars, you can't go wrong.
Does yours also do this: sometimes when I breath in slowly the valve is not closing and I can smell the paint, it seems I have to breath in hard for them to close.
Thanks for making this video. 3m's website lacks in real description and use of their products.
i just bought a 6500 series with the drop down feature and a 7500. 7500 is the way to go. I like the drop down feature with the 6500 but the upper straps are kind of annoying. They are clearly visible in my lower field of vision, right above my cheeks.
I bought both mask to replace a 6000 series that a dog ate. Its okay though, because I was starting to use it enough to notice what I didn't like about it. Plus it started hurting the bridge of my nose.
Looks like the 7500 is what i am keeping. The silicon is soft and seals to my face much better.
Thanks! I was wondering if I should get the 7500 or the 6500 and there is so little information available!
Same thoughts and im too close for purchasing the 6502QL! im just amazed by the latch part but what i need is the comfort coz im gonna use it a long time in the clinics thank you for this!
This comment is two years old now, do you still feel the same way?
@@TheRealKirkHammett yes. Just bought another 3m 7500. Been wanting to buy one sooner but covid had made them much more expensive and hard to get
The term 'dust' is a little generic to make a recommendation on. The cartridge respirators we sell have a selection of filters to choose from. These filter out particles, much like a strainer. If the particles are toxic, say lead or asbestos, we recommend a P100 (HEPA) filter, such as our 3M 7093. For more common dusts, such as drywall or household, we suggest the 3M 2071, a N95 rated filter.
As far as buying in the UK, 3M products are available there. They do have different part numbers.
@phonyization We would use 2 different filters combos. For the welding, grinding and sanding - use the 3M 7093 P100 filter. For the spray painting - use a combination of 3M 6001 cartridge, 5P71 filter and 501 filter retainers. There is a single that would do it all, but I wouldn't suggest it. The 3M 60926 covers all this, but costs $ and once the P100 filter is full (for instance) you are replacing the whole thing. Also, please note we don't recommend this for urethane paints
Thank for the prompt reply. No big difference from the valve but I take it the comfort from the material alone is worth it. I'll definitely look into a 7500 when time for replacement comes. The 6000s don't have replacement parts afterall.
@techrepairTV We generally recommend a P100 filter for the fumes (burnt metal), and then add a layer of charcoal to absorb the acid or rosin core vapors. So the filter would be the 3M part number 2097, and would fit on either the 6000 or 7500 masks. No extra parts to buy.
I am interested to know which filters you would recommend for forest fire smoke and volcanic ash. I see that the CDC recommend N95 for volcanic ash particulates, so 3M 2071 might be enough. Please share any thoughts you might have taking into consideration hyper sensitivity to smoke smells. Thank you!
@@SaltAndCopper The standard recommendation is N95 for volcanic ash and forest fire smoke. An upgrade to this would be using a P100 (HEPA) rated filter, as this is the highest on offer. However, these will not remove the smell, or the toxic witches brew that comes from a forest fire. Out here in the West, seems there is always something more than just wood and brush burning. Cars, garages, and farm outbuildings are just a small sample of what goes up in smoke. It may seem overkill, but for sensitive folks, a combination cartridge such as the 3M 60926 might be warranted. And as a further step, a full face respirator like the 3M 6800. This allows only filtered air to come in contact with your eyes as well.
@@rickpedley1099 Thank you very much for this very complete answer. This confirms many of the suspicions and doubts I was beginning to develop.
The valve design is a bit different, in that the air is directed downward as it exits the mask. I can't say that I have noticed a performance difference within the mask. I have worn both styles for many hours doing a variety of jobs. The 7500 is more comfortable without a doubt, and the softer material may offer a better overall fit. Also, being silicone, there is less chance of skin irritation with the 7500 on those folks that are quite sensitive. But the exhaust valve, not really a difference.
For me, it is the opposite. 6000 valve is all good, but it does not perform as well as the 7500 in places where the front of the mask will stay cold, and the intensive workshop job will make exhale a lot of humid air (sometimes, in the form, of a small cloud). This situation makes 7500 shine. Because with every minute of intensive breathing, the valve will get wet. I mean pouring water wet. In the 6000 series, it stays in the valve for a while then drips thru the small slits. In 7500, the breathing condensation simply pours down from the "nose" of the mask. Away, from the face and the user. Also, the material of the facepiece. I saw a 10-year-old shelf (double the expiration time) stored at 7500, and it looked and worked like new. Nine years for the 6000 in the same storage turned its facepiece a bit soft and mushy. We've still used it, but only twice the UV in only three days turned the "out of date" 6000 into unpleasant goo.
Any other cases - 6000 is a great product, and for some, it is close to no difference in use with two masks priced like a single 7500.
Great video! Here's my take: ask yourself these two questions:
1) Do I have an allergy to rubber?
2) Am I going to be using this daily (i.e. professionally) and wearing it for extended periods?
If the answer to either is 'yes', then buy the 7000 series. It's more comfortable when worn for long periods, and will last longer. For 90% of people, though, they'll be perfectly happy with the 6000 series. If you're just doing a few household projects, the 5000 will be fine, too.
They both work amazingly in this pandemic....7500 series are the way to go.....
The 3M 6000 half mask is available in 3 sizes; Small, Medium and Large. Small is for a petite woman. Medium fits 75%+ of our customers. Large is for someone with a noticeably large or long face, and sometimes those with a very prominent nose. There are no metrics or measurements. Trying on the mask and fit testing is the only sure way to know.
I bought 7503 mask and neither the handle nor the mask inside was factory wrapped in foil. Only the filters were packed in factory-welded foil. It's normal?
Spraying paint; for this answer, we will say that you are using a solvent based lacquer. Not a urethane paint. You want an organic vapor (charcoal filled) cartridge, such as the 3M 6001. We will then add a pre-filter, such as the 3M 5P71. This catches the paint mist before it gets to the cartridge. Generally, the pre-filter is held on by a retainer.
Similar products from 3M are available in th UK.
i love the part were it squeezes the silicone 7500, and says " i dont know when this will break down..."
Exactly the sort of review that I was looking for!
Well, I'm really late to the party here! You have really convinced me to go with the 7500 for jewellery making. What I'm still stuck on, however, is size. I'm fairly small... 5'2" x 126 lbs. and wear between a small & medium in clothing. I "think" my face is small. I was leaning toward purchasing the small mask, but since more people wear the medium, I'm not sure. Can someone please help me re: sizing???
I like the look of the 7500, I need to grout my bathroom, can you suggest the right filter/cartridge when using bleach?
Thanks!
So one is more durable and comfortable, the other is cheaper.
Both have the same safety, use the same equipment etc.
Thank you very much.
Which one would be better for routing and cutting mdf? With a p100 filter of course
If you are buying this mask for your own use, I would definitely consider the 3M 7500 mask first. A little more money, but much more comfortable, and if you hang on to it for a while, the cost per use difference is tiny.
I'll think that in general we are talking about 'rattle' spray cans being used for this application. There are several solvents used, but in general they come under 'organic vapors'. I'd recommend the 3M 6001 organic vapor cartridge with a 5P71 prefilter (for the paint solids), held on with a 3M 502 retainer. As usual, we recommend that you try and have adequate ventilation, like you might find on an overpass or bridge abutment. ;-)
I have a 6200 mask Which I have been using for a year with 60923 filters. Turns out that these are vapor filters and I'm using them incorrectly for wood work, sawing ,turning etc. (By the way, it is comfortable). I agree with Johnathan below that the stores have little to no idea on the correct filters to use, maybe because they carry only a couple of types.The labelling on the filters is also very poor. Based on this video I will be contacting PK Safety and buying a 7000 series with the correct filters. I had been about to buy a Trend dust helmet $400, but they have 22% a one star rating on Amazon and I think that 3M is a better simpler way to go.
What filter would you recommend for sanding or grinding metal? Thanks!
what respirators would you recommend for automotive urethane paint
Hello mate. I am debating between buying two models, the 6500QL or the 7500.
Which one would you recommend if in terms of comfort and practicality, it refers to use in welding and tasks such as grinding or plasma cutting, etc..?
It would be for use between 5 - 8 hours. Thanks and regards.
15 years later this video is still great haha
We sell these on our site pksafety(dot)com. The 6000 runs 10.65 each, while the 7500 is 23.60 each. Neither one includes filters or cartridges. We have all the popular cartridges and filters for the 3M respirators, and they all fit on either mask.
Household bleach is a diluted chlorine solution. For that we would recommend using the 3M 6006 multi gas vapor cartridge. It fits right on to the mask with a quarter turn. No other parts required. When you put the assembly on, you shouldn't smell or taste the bleach. Once it starts to 'break through' then it is time to change your respirator cartridge. There is no set time limit, and it sounds like your exposure will be minimal, so the 6006 cartridges should last a good while (8-16 hours of use)
I'm going to "graffiti", and I read that inhaling those paint fumes can be quite harmful. So, please answer, which one should I use to make graffiti?
I use nail polish quite a fair bit and my parents are concerned about longterm inhalation of nail polish fumes. Should I go for the 7500 or the 6000?
Hi, What would you recommend for kids? Are they available? We're not so near a volcano, but we can view it from our place which means we can still be reached by a heavy ashfall.
3m stipulate the 7500 has a different exaust valve design that makes it dryer and cooler inside. Did you find any differences in that matter over the 6000?
Hi, I like the look of the 7500, I need to grout my bathroom can you suggest the right filter/cartridge when using household bleach?
Thanks!
3M 6004 cartridges are made to be used in protecting against low levels of ammonia and methylamine, not when using spray paint.
For spray paint, lets assume this is a rattle can of standard lacquer or enamel. Added to the basic mask would be a pair of the 3M 6001 organic vapor cartridges, the 3M 5P71 pre-filter, and 3M 501 retainers (to hold the pre-filters on top of the 6001 cartridges). This is the standard 3M paint spray respirator assembly.
Thanks for simple and good explanation I actually have both of them and after reinstalling the cartridge more than 4 or 5 times there is an issue at locking mechanism at 6200 as I usually have problem when I install the cartridge due to that I am not professional but 7500 is more tough and now adays the cost approximately the same at 2020 at my country Egypt during Corona virus but without the cartridge
I have used 6000 for many years until I got a 7500, the 7500 lasts ten times longer, is more comfortable, wlastic head strap lasts ten times longer, more comfortable, doesn't stink with repeated use like the 6000 series. I consider the 6000 series junk, with repeated use over years the 7500 is way cheaper, one mask lasts for years where the 6000 lasts a month or two.
thank you so much, bless you.. i bpought it in a hurry to visit my sites but did not have a time to ask the sales people how to use or , did not want to read the manual. your video is very helpfull. please keep upo the good job
How many upgrades have there been since 2009 when this was made?
The 3M 6000 and 7500 have been unchanged in all this time. Still our top selling half mask respirators.
@HighPerformance7uner Hi, This packaging is standard for the industry. The bag is there to protect the product and ensure that it is new and unused. I have not seen brands go to the extent of a 'vacuum seal'. In theory organic vapors can be absorbed out of the air, but in practice it doesn't seem to be a concern. We generally say to keep the cartridges away from solvents (in a zip lock bag for instance), and in the 30+ years I've been doing this, that seems to work.
@skeletonbite
The filter change interval will vary depending on how much dust/fumes the filter is exposed to. More dust/less time, less dust/more time. On the plus side, the filter is becoming more efficient as you use it. However, there is a practical limit to this, as the filter will become harder to breathe through.
Take care to keep any lead covered items (including the filters) from spreading to other parts of the house. We may suggest the 3M 7093 filter, the filter media is covered.
Rick
lmao the 4:3 res of the video got me sceptical but after verification we're in 2021 and those two series of mask are still the most popular, and no 8000 serie in sight yet.
did not age well, prices went 150% more expensive
I checked your website and I saw that you also have hard hats. What items would you recommend to pack in case of an earthquake (which is normal here), a volcanic eruption or a nuclear fallout. We're a family of 4, 2 adults 2 kids. Would the small 7500 respirator fit kids age 8-9?
@josiqvideos09 Since you mention paints, I'll guess you have a mask that has organic vapor cartridges (charcoal filled to absorb solvent vapors) and prefilters (white pad held on by a retainer clip). The prefilters are in place to catch dust and mist, such as paint spray mist. They can become clogged over time and use. They can be replaced easily and economically. If you are using the 3M mask as pictured in the video, then I would suggest the 3M 5P71 prefilter. They come in a box of 10. Thank U!
Urethane paints contain (more often than not) an ingredient called isocyanate. This is hazardous to your health. You can neither smell or taste it. It is absorbed to a small extent by organic vapor (charcoal) cartridges. For these reasons, we don't recommend cartridge type respirators for urethane paints. Good ventilation can help, as can changing cartridges frequently (hourly). Professionals use an air line respirator. Clean air directed to your mask thru a hose. This is considered the best.
Wow 2023 here and I just purchased the 7500 series and it was 47 plus tax..
How do you determine what size to buy?
The size question is a vexing one. There are no metrics to go by. That is, no measurements are reliable in making the choice, so none are published. Here is what we tell our customers; around 70-75% use the Medium size. This has been true for the last few decades of my experience. So if you have what you feel is a notably small face (think petite woman) then Small may be the right choice. On the other hand, if your face is quite large (notably so), then go with the Large size.
The best way to actually determine fit is with all 3 sizes in front of you, with preferably more than just one brand choice, and try them on. Then a fit test by one of the common means; Smoke, Saccharin/Bitrex, or banana oil (Isoamyl Acetate). It helps to have a person experienced in this to assist you, but not absolutely necessary.
I paint with one shot enamel and was wondering what I should use
@pksafetysupply I like to use it for shooting to filter out the minimal vaporized lead, and to for gun cleaner solvent fumes. I've been using the 60923 filter.
How many uses do you recommend? I shoot for 1 hour sessions. Also is there a timed expiration? thanks in advance
Thanks... your vid help me decide on the 7500.
anyone know how these stack up against the 6500/6503QL rugged comfort respirators? seems like it's all down to fit and comfort/adjustments
I have the 3m respirator the one on the left of this video, and i got it and it came with everything but my mates one came with a filter retainer does it matter if i dont have one
What about the exhalation differences between these 2 masks?
The main difference in the exhalation valves are the covers. Both valves are front and center, right where they belong. The 3M 6000 has a protective cover with slots to allow airflow. The 7500 has a plastic covering over the entire valve, with an opening at the bottom. This directs the exhaled air downward. Here are a couple of example benefits from this; automotive spray painters like that the micro water particles the exhaled breath don't hit their work, while abatement workers are able to shower and decontaminate with the water running right off the mask.
Has anyone used both of these masks for a long period of time that could tell me honestly which one they prefer and why?
you want the 7500 why the exhale vale is covered so its less to get inside if some does some thing on you
Hi im looking for a spray paint resp are those cartridges on the 6000 for spray paint and were cn i buy it im in the uk
You should probably just keep a couple of windows open in the room where you're doing your nails, have a fan moving air, and don't put your face directly over the wet polish (i.e. don't inhale directly).
If you really want to be safe, though, just get the 5000 series disposable (or the 6000-series if it happens to be cheaper in your area).
Thank you so much for the review. Do you recommend a particular cartridge or filter to use in terms of COVID-19 ? I had bought the 3M P-100 filters, and 60926 and 60921 (?) cartridges.I read that the P-100 filters can become contaminated with the virus, so not sure what to do now. Thanks for any recommendations.
I recommend fresh air and exercise for covid-19...
It's unlikely the virus would make it all the way through the mask even if it became contaminated internally. Be sure you store and clean all equipment properly. Also for COVID 19 as far as laws and rules go in area's where you are required to wear a mask these would not be approved, they do not filter outgoing air, which is what mask are mainly being pushed for. So if you have covid and you wear this, it will keep spreading covid every time you exhale. You could I suppose tape a filter or mask to the exhaust vent with medical tape but I dunno. Though it can't be recommended many people will keep using them until it becomes too difficult to breath then replace them. Obviously not legally binding advice and ask a professional before you do anything.
@@goodman854 If someone has COVID and wears these respirators with their exhalation valves sealed shut he/she will definitely die due to suffocation. So instead of these respirators with P100 filters they can wear non valved N95 respirators or FFP2 masks e.g. 3M Vflex 9105 N95 or 3M Aura 9320A+ or 3M Aura 1870 or just put a surgical mask if their oxygen level is too low and suffering suffocation.
The 7500 also has a downward exhaust (cool flow). Could you share an experience whether that is worth it?
The downward facing exhaust valve has it's best use in automotive painting, and the like. If the surface finish is critical, and you get up and close during application, you'll be glad the airflow and moisture aren't going straight into your work. For other jobs, when you start working hard, the moisture can become pronounced. Once again, having it exit or drip down may be a benefit.
what size is the 3M 6000 Series Half Mask Respirator?
i like your instruction video's, very useful if you're new to that stuff...
i would be very interessted in buying the 7500 mask from you with enough filters but i'm abit confused right now which one to use...?
i work alot on custom bikes and cars which include mostly arc welding,grinding steel and stainless steel,fiberglass/resin work, sanding filler/wood and painting
does a 3m filter exist which will protect me for all of those works?
I'm new to this shit so can someone please reply answering this...
If I get the 7500:
Is it safe to use spray paint with? (Graffiti)
How often do i need to replace the filters?
Eventually will the actual mask part have to be thrown out and if so how long until?
Instinct Parkour I help my dad with products for his company, i spray paint the stuff and he bought me this, I'm 12, will this fit me? Thanks!
Daggers | SUB TO BECOME A DAGGER!! Using the Small size (p/n 7501), will likely fit. Only sure way to tell is to try one on, and better yet, do a fit test.
Rick Pedley Thanks!
+Instinct Parkour You gonna do some tagging yo? like the other rap degenerates be doin, eh dawg? Re$peckt dat shit. Fucking losers.
Im working in Flushing NY will i get caught by cops if i wearing the 7500 mask with filters and go to work?
It doesn't seem like wearing a respirator is breaking the law? It certainly is more common to see a typical dust mask, such as the 3M 8210, or a surgical mask. With the current virus scare, there may be many more people wearing masks. It is good to note that any mask with an exhalation valve will expel unfiltered air. So if you are the person who is sick, the droplets will escape the mask.
@@rickpedley1099 but walking on the street i may look like a weirdo XD
@@hmmdoh7835 Not sure what to tell you. This is a choice, and only you can weigh the factors. If there is deep concern, a surgical or N95 mask may seem more appropriate?
@@rickpedley1099 im not sure but judge by China situation the sickness real serious n ez spread than what ever the WHO said
@pksafetysupply Hello! Im trying to order on your website, and on the drop down menu where you pick your country, there is no Canada. Is there onther way I can order? Thanks
Comment puis-je savoir si je dois prendre un modèle small, medium ou large ?
How do I know if i have to buy a small, medium or large model ?
When it comes to respirator sizing, there are no specific metrics. No length, circumference or ratio. From long experience we know that approximately 70% or more of users will fit the medium size. So if your face is noticeably larger or longer than average, choose size large. Also, a very prominent nose can effect this. On the other hand, a person with a quite small or petite face should choose the small. Other than actually trying the mask on, that is all the guidance we can offer.
Thanks for the comparison info.
3m needs to step up the f'cking pr game..thanks for explaing this! I wish i had seen it a week ago. the price diff was only like 4 bucks but i was in a rush and it wasnt stupid easy to confirm which was better/ what carriages the 7000 took/which was better. part amazons fault but google must have found an old page or they are truly not selling this right (might explain your sales of 6500 )because even 3ms website wasnt in your face easy. 6500 looked more rugged and had more reviews to. is 3m so big they just dont give a shit about marketing any more? one amazon vender had a table but it was missing 7k series. is 7k compatible with welding mask? also i know the argument is for full face if i ever want to use it for mold..but will something like magenta tan for chemicals handle mold too or is there a better particulate filter to get?
Which one does breath easier?
I bought another brand and it has a large resistance to in- and exhaling and the outlet valve flutters all the time...a real dud
The breathing resistance between these models is essentially identical. A major factor is the filter or cartridge. Some brands flow easier than others, though this is not something that is regularly measured and reported by manufacturers. 3M is the largest and arguably most trusted brand in respiratory protection. Between the 3M 6000 and 7500, the big difference is the comfort. The 7500 has a softer silicone based facepiece, and cost aside is the preferred choice.
@@rickpedley1099 h Thank you so much for your reply
Is this mask rated for PM2.5 protection?
+Will Gilpin The mask, when fitted with the correct filters will meet or exceed the PM2.5 requirements. The US spec P100 (HEPA) filters are rated 99.9% effective against particles 0.3 microns and larger. The PM2.5 standard refers to particles 2.5 microns and larger. With this mask, we would recommend either the 3M 2091 or 3M 7093 filters.
@@rickpedley1099 I am curious. In case of a 2019-nCoV pandemic, I'd like to be prepared. Therefore, which filters do you recommend for that situation?
@@Mikkel111 We do not make any recommendations for masks or filters regarding viruses or other health issues. We do reference the CDC recommendation of N95. They have details on their web site.
@@Mikkel111 you need to educate yourself about the olandemic. no mask is needed
@@raymadani270 Right back at you.
A face-cover is barely able to filter out outside pathogens. But it is able to filter the outside from you.
Also, a HEPA/ULPA-filter is capable of filtering the pathogen itself.
Last but not least, the comment you answered is older than a year. So please check the date, buddy.
Hi! I have 3m 6000. I need to know when i paint with spay cans, what i need..
Should i put prefilters or not?
Sorry for my bad english
SAUR one sorry for the taco lenguage
Can you creat the half mask it must have voice changer and voice remover and openable for mouth part and also wifi earphone phone for everymobile?
When using it, can you talk?
Yes, you definitely can talk. However, the sound is quite muffled. If the background noise is pretty quiet, communicating is possible. Just have to speak slow and clear. Clearly not the preferred way to share a conversation.
this video was so helpful
The fight against sars-cov-2 sent me here.
$10 to $20 range 😂🤣
Not during a Global Pandemic
$80 to $120 Range ✔
Mark Larson unfortunately so-mines ran me $60+
I can’t even find them in my local stores anymore.
@@darkchokolatthunda I paid $55 .The price gouging is outrageous and illegal, but I'm trying to stay alive..
Of course ,it is illegal to price gouge respirator masks during the pandemic.It's being done widely, but is illegal. A price gouger in my area has been sentenced to prison for price gouging PPE.
bought the 6200 for $20 in Sweden.
Are any of them contain a harmful products? Like any cancer or reproductive warning associated with any them?
The 3M 6000 and 7500 masks have no harmful ingredients. The straps are even latex free. There is the possibility that some folks have extreme sensitivity to chemical vapors of any kind. In that case we recommend the 3M 7500, as the silicone rubber is inert, and offers the best chance of avoiding this rare occurrence.
Thanks!
how often are you supposed to change the 7500's filters? (lead exposure)
Every one month
Thanks for clarification
no, just commented waiting for a quick response
Great rev thx for all
Needed this info now. Thanks!
Can someone tell me what you would use too clean your mask?
For daily cleaning, wipe with an antiseptic PPE wipe. For more cleaning, you can clean in warm water with a mild detergent. Use a soft brush to clean the mask. The masks can be taken apart, which you must do carefully. Rinse in a mild disinfecting solution. After cleaning, rinse and dry with a clean cloth. Allow to air dry before re-assembling. After assembly, wipe with an antiseptic PPE wipe. You can get instructions for the masks here:
solutions.3mcanada.ca/wps/portal/!ut/p/a0/04_Sj9CPykssy0xPLMnMz0vMAfGjzOJDDQx8LZwMHQ38DfwMDDxNzYINHAMDPQ0tzfSDU_PinR31C7IdFQEOHRSi/
THanks!
$20? Wow... these masks cost about US$75 with a pair of filters in Australia
almost $100 at Bunnings.
We are being ripped off in this island mate
@@raymadani270 I know... the price difference between the 6000 and 7500 is like the cost of the 7500 in the US 🙈😂
You should have mentioned the down air exhaust to keep your googles from fogging up on the more expensive model... I can't stand fogged up goggles or classes.
Right you are. An oversight on my part. However, my observation has been that the front exhaust has minimal impact on fogging. Rather, the downward exhaust is very helpful in painting. Droplets of water, condensed from your breath, can negatively impact paintwork in progress. This has been a particular problem in automotive refinishing.
Midway this pandemic brought me here
same
The 7500 series is a far superior model. a much better seal and fit.
$10-$20 in america, $50-$100 in Australia, wtf
bro i paid $50 for my 7500 during the corona pandemic... oof
I paid 35
in switzerland the 6000 costs 26.- and the 7500 costs 45.-
thanks obama ^^
Spaeckli In Slovakia same.... 6000 cost 20€ and 7500 cost 45€???
I just bought 6200 frpm ebay for 10€. Haven't received yet.
That's almost the price we pay in the US in 2020
Thanks!!!