How To Replace the Clutch in Your Whirlpool-Style Washing Machine: A Step-by-Step Guide
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- If your clothes come out wet from the spin cycle, your clutch pads are worn, and your machine can't correctly spin the water out.
This video will help you replace the clutch on your Whirlpool-style machine. A Whirlpool, Maytag, Conservator, Estate, Amana, KitchenAid, or Kenmore will have this particular part on it.
As an Amazon Associate I earn from qualifying purchases.
Clutch assembly: amzn.to/3L1ygca
If you feel like donating:
www.paypal.com...
Send me something:
Harper & Knowles
2945 Highway 1153
Oakdale, LA 71463
My Gear
My Vlog Camera: amzn.to/43vbRv3
My Backup Camera:amzn.to/3UGIz8H
My Studio Camera: amzn.to/417DV5Y
My Wireless Camera Controller: amzn.to/3L4MhWg
My Preferred Memory Card For Cameras: amzn.to/41xIHtc
My Portable Charger: amzn.to/41dtTAc
My Studio Microphone: amzn.to/41fcrLO
My Lavalier Microphone: amzn.to/3UC8Tkn
My Studio Teleprompter: amzn.to/3KJikts
My iPhone Gimbal: amzn.to/3GMLd76
My iPhone Chest Mount: amzn.to/3zZUZ1I
My Main Studio Light: amzn.to/3mvBV8N
My Secondary Studio Light: amzn.to/3GM2v45
My External Hard Drive: amzn.to/3GMLDKI
My Publications
My pen name is Cal Kasheau. Hey, I'd like to shamelessly promote my literary accomplishments while I have your attention. I have several short story titles you can get on Amazon; the links are below. Some are humorous, some reflect events in my life, and some are legends I heard of as a child in the swamps of Louisiana. They are only a dollar or two, and most are free with Kindle unlimited membership. I hope you will take the time to read one or two and give me your honest opinion in the comments on whether or not I should continue to pursue a side gig as an author.
The Legend of the Loup Garou: A Louisiana Horror Story
amzn.to/3EJE4o2
The Legend of the Parlangua: A Louisiana Swamp Tale
amzn.to/3VtF3ys
The Fuzz vs, The Buzz: A Backwoods Beekeeper Meets a Traffic Cop
amzn.to/3EEvwP7
The Story of Buster the Cat: How I survived the Ride From Hell
amzn.to/3T5BM6L
Tell a Story ,Teach a Lesson
amzn.to/3CUd2I3
The Dreaded BMI Index: How it Was that I Went on a Diet
amzn.to/3T5W53Y
My Misadventures as a Moonshiner
amzn.to/3CAmBLT
The Magic Blanket
amzn.to/3yGE8AS
All the Girls I've Loved: A series of stories about a young man's life and the women he loved
amzn.to/3esvIXb
Thanks for watching!
Thanks soooo much for making this, and these videos for do-it-yourself people like us! It's a real treat
Glad you enjoy it! Thanks for watching!
Thanks for all the videos you make!
Wow! Thanks for your kind comment and I appreciate you taking your time to watch them. Carry on my friend!
Just replaced my clutch. Now my agitator will engage but washer won’t spin. It spun for one cycle and then stopped.
You did something wrong. Pull the transmission again and examine your work. Look at the brake cam on the spin tube. Be sure it releases the brakes. If everything looks good on the outside then replace the neutral drain kit. Fix The Whirlpool Transmission | Replace the Neutral Drain Kit
th-cam.com/video/hOFnb2Zh160/w-d-xo.html The large spin gear inside might be stripped and replacing the kit will fix that. Thanks for watching!
Excellent video. Just replaced my transmission box and washer still not working. I can see the Gear box spinning box machine still not agaiting.😢
Because you commented on the clutch replacement video I assume you mean you replaced your clutch. The clutch has no function in the agitation cycle so you probably have an issue with your transmission. Specifically the parts on the lower end of the shaft. This is probably the video you should be watching. Whirlpool Gearcase Rebuild | Total Overhaul Corrected
th-cam.com/video/UbybdNrfYvg/w-d-xo.html. Thanks for watching!
i have a whirlpool direct drive top load washer. I cannot spin the agitator by hand but if i spin the coupling that connects the motor to the transmission it will spin the shaft. Im wondering if this is going to be the clutch?
The clutch is associated with the spin function of the transmission and has nothing to do with the agitator. If you are having problems with agitation your problem is elsewhere. Thanks for watching!
mine would spin very randomly but aways agitate. clutch good and tight but replaced the band. still no good. brake was tight so replaced spin basket/brake assembly, still no good. changed out transmission and that did it.
I bet the plastic spin gear was worn out in the transmission. Get a neutral drain kit and you'll have a spare transmission. Thanks for watching!
@@HarperandKnowles Chip a few questions. when rebuilding a transmission, how do you know if fluid is still good, do you use a solvent (like kerosene) to clean out and its gear oil 85-90wt ? thx
I look at the transparency of the oil. If it’s black and nasty I'll change it or if there are metal flakes or plastic shavings I'll do the same.
I just wish I could manage to pull the shaft out of my girlfriend's Roper washer to install the clutch kit I've had for a month. I've been repairing direct drive washers for years and have never encountered this problem
Remove the agitator and motor and unbolt the transmission. Turn the machine on its side. With a similar-sized rod or block of wood, use a heavy hammer to drive the shaft out through the bottom. Usually, when the shaft clears the first seal, it comes right out. Thanks for watching!
I replaced the clutch but now the washer doesn't balance. What did i do wrong?
If you had it turned up you might have misaligned the triangular plate that rides between the tub fins. Be careful with this, you can crack the tub if the fins ride up on the plate. Also, check that the spring at the rear left of the machine is attached to the bottom of the frame. You should also check the snubber pads for excessive wear. Thanks for watching!
Thank you for the quick reply. I did have to adjust the plate. We are back in business.....washing
Transmission will not pull out, all steps followed . what next ? MTW5770TQ0 Maytag
Put the transmission back in and secure it with one bolt. Take a piece of 100 grit sandpaper and polish the shaft below the agitator splines and above the shaft seal to remove any rust. Make it shiny. Blow off any dust or wipe it clean. Apply some oil, or WD40 to the area and try it again.
@@HarperandKnowles smoothed that surface with a very fine file ,cleaned recess with a pick tool will hit it with KROIL and let it soak . at this point im about to to get the sawzall
With the washer on its side use something to drive the shaft out. Once it passes the top seal it should be easier to pull out. I use an old shaft from a used transmission for this just be careful not to scar up the splines or the threads for the agitator bolt.. FYI if you polish the top of that shaft after you get it out it should go back in easier. You did take all three bolts out of the transmission? Don't use the sawzall !
@@HarperandKnowles Gonna let it soak over night and try in the morning Surely did take bolts out ,moves about 2 or 3 inches then stops . Thanks for your responses .
Very good video
Thank you for the kind comment, Bill. And thanks for watching it.
Sir do front load washing machine have clutch?
Most front loaders are driven by a belt from the motor to the tub with no clutch involved. Thanks for watching!
What is the name of the kitty? Hope all is well.
Cheers from S. CA
I don’t know, she belongs to a neighbor.