WMR Tech Talk: Setting TPS / Idle Adjustment

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ส.ค. 2024
  • TPS tells the engine control unit (ECU) how far the throttle is open, which helps the ECU to control fuel delivery and ignition timing. If the TPS is not set correctly, it can cause various problems. Watch the full video to get a complete breakdown from Paul on how to adjust your TPS.
    Learn about WMR Racing Development Tuning services here: bit.ly/3BUAfcL

ความคิดเห็น • 21

  • @MikeDougherty-ku9uz
    @MikeDougherty-ku9uz 8 หลายเดือนก่อน +5

    This is a good video that just needs some fixing! I was super confused so the comments were helpful. To try to help, here's the quick steps: 1. back off both Yellow and Red knobs (CCW); 2. set TPS to 0.400; 3. turn RED KNOB in to 0.500: 4. turn Yellow Knob IN till 0.6500 after clicked in, use throttle to click off. 5. start bike and turn Red Knob in to 0.530 Done.......hope this helps

  • @Adameftube
    @Adameftube 10 หลายเดือนก่อน +2

    Proper instructions (red vs yellow knob) from 13:19 onwards. Red is idle (5v) yellow is cold start (6v when pressed in but will jump out when throttle rolled forwards and have no effect on rpm, leaving the red knob to keep the 5v setting). Hope that helps. This video seems to double up the instructions with knobs confused. The first run through is wrong 11:10 = ignore him saying the yellow is your idle. It's the red.

  • @velmamalleis9629
    @velmamalleis9629 3 หลายเดือนก่อน

    I have been to your shop. Everyone super helpful and great to purchase.

  • @719vol
    @719vol 14 วันที่ผ่านมา

    Ok what model year bike are you working on? What model years & displacements is this procedure relevant to?

  • @allenweinberg1314
    @allenweinberg1314 26 วันที่ผ่านมา

    this becomes crazy !! the color knobs are inverted 3/4 of way in so I just about loose it trying to do this !! PLEASE REDO THIS VIDEO AND PUT CAMERA ON EACH KNOB..LET ME KNOW WHEN IT'S DONE. THANKS

  • @TheMotorongo
    @TheMotorongo หลายเดือนก่อน

    Excellent...!!!

  • @nathanrigaud3157
    @nathanrigaud3157 9 หลายเดือนก่อน +1

    will this work for 2020 KTM 350 exc-f model too? as far as the values on the meter?

  • @andrewsoldan6050
    @andrewsoldan6050 11 หลายเดือนก่อน +2

    so which is idle knob, yellow or red :) some inconstancy here

    • @Adameftube
      @Adameftube 10 หลายเดือนก่อน

      see my comment above

    • @med0ri
      @med0ri 3 หลายเดือนก่อน

      Yellow is cold start idle
      Red is normal idle

  • @thir13endaz37
    @thir13endaz37 ปีที่แล้ว +1

    Is this the same adjustment for the 2024 KTM 300SX?

  • @stevenmcallister2230
    @stevenmcallister2230 3 หลายเดือนก่อน

    Can u help I have ktm sxf 250cc 2012 kick start only got pigtail and multimeter but doesn’t run properly dies after 10 seconds so can I still set TPS

  • @1301ktm
    @1301ktm 8 หลายเดือนก่อน

    Great info, will these readings work the same on a 2013 ktm 350 freeride

  • @alecskursha2090
    @alecskursha2090 ปีที่แล้ว +1

    at 12:04, youre now adjusting the yellow knob and not the red knob correct?

    • @Adameftube
      @Adameftube 10 หลายเดือนก่อน

      see my comment above

  • @ForeignLifestylestory
    @ForeignLifestylestory 4 หลายเดือนก่อน

    Will my fecon falcon ktm 400cc motorcycle be the same on the meter...its a 2023..

  • @DidierEtienne-vq5oj
    @DidierEtienne-vq5oj 3 หลายเดือนก่อน

    Bonjour est ce que ce sont les mêmes valeurs pour le 125? Merci

  • @DidierEtienne-vq5oj
    @DidierEtienne-vq5oj 3 หลายเดือนก่อน

    Bonjour ,est ce les mêmes valeurs pour le 125? Merci

  • @allenweinberg1314
    @allenweinberg1314 25 วันที่ผ่านมา

    well you call both knobs "idle screw" ??? at least say top screw and bottom screw

  • @wwilcox2726
    @wwilcox2726 4 หลายเดือนก่อน

    👎 :-/
    That is not the proper calibration for KTM TPS and you should not be backprobing sealed connectors or they will no longer seal properly.

    • @719vol
      @719vol 14 วันที่ผ่านมา

      They are not sealed.