Gunpla Builders Parts - EFSF Hands 1/144 & 1/100 Review

[@landwand]

The 1/144 hands would work very nicely on that kit. The 1/100 would be out of scale with OO 1/100 kits. (they're oddly too large, IMO)

[@lkerzgrl24]

Thanks for this video, easier to make a decision to buy now

[@adudewholikesgunpla]

I plan on getting these for my narrative gundam c packs

[@HaohmaruHL]

These are like the lost treasure now and are almost impossible to find. I recently built rx78 3.0, hated the hands and wanted to swap them. Only to realize that I can't anymore.

[@Brawler_1337]

Really? I’ve seen them available on places like NewtypeHQ.

[@HaohmaruHL]

@@Brawler_1337
I was lucky to buy the 1/100 one for 900 yen recently. I scout hobby stores every week and I've only found one of them, otherwise I'd buy like 5 or 10. I also saw a couple 1/144 ones but that's about it. Really hope Bandai reprints them again but they're too busy with Build kits for now.

[@cristiTM89]

8 years later, they didn't release good hands yet and so hard to find.

[@landwand]

"they still look like big monkey hands"
I luled.
I find it annoying that the thumbs are moulded into the index finger. It probably was a cost saving measure, but I have to scratch build quite a few thumbs to make up for this!
I find them very large for 1/100 MG kits. They're more suited for large 1/100 models like the Mk2, Zeta or even Nu. I put a set on my Ground Gundam -- it looks a bit silly.

[@izzarchron]

yes how about using HG 1/144 scale hands fr MG Wing kits?

[@titan133760]

How do they work with beam sabers, especially for the 1/100 hands?

[@Suwakun]

Aren't the backings for the hands separate so that bandai can just reuse those molds when they release more sets of hands in the future?

[@TDizon3]

Try the uc 1/144 scale hands that might work since uc has big hands, but yet small scale for your tallgeese

[@landwand]

They're to small for Wing, sadly. Maybe the upcoming 1/144 LARGE hands will work.

[@ToaKoran]

Just to be sure, would the 1/100 scale hands be the best choice for the Hi-Mock? I want to make sure I don't get any that don't look right on my kit, and to get an idea of which hands look best on certain HG kits.

[@DJBobcat98]

Are they snap fit or did you glue them also do you think that these hands are good for MG Jesta

[@neoncascade858]

Would these fit a 1/100 astray model kit? Thanks

[@ethane8381]

Do you think the 1/100 EFSF hands would be better for the Sinanju Stein compared to the 1/100 Zeon hands?

[@yang576]

How about using HG 1/144 scale hands fr MG Wing kits?

[@AJigsCorpuz]

Does the 1/100 hands are good proportion on MG Unicorn gundam?

[@theodorecruz8948]

I Just got the 1/100 EFSF, sad to say that it wont fit in the MG Unicorn, :( too bad since it's as big as the hands that came with the kit though the pegs for the hands of the MG unicorn are too big :( wont fit unless you do some modifications :(

[@gsara2562]

Will this work for the nu ver ka sir?

[@riceboycruz1300]

Are these compatible with the RG?

[@Tula-cs1ef]

Hey on amazon there are a listing for a large size and a small size version. and due to my girlfriend's stupid cat i need a new trigger hand for my 1/144 hi nu gundam which size would be best

[@MisterSouji]

I'm building a MG style Tallgeese, essentially a 1/100 Tallgeese with an inner frame and more detail. Which of these option hands would you recommend for a 1/100 Tallgeese? It's not like you have three of them.

[@dannybui7161]

The 1/144 version look like the are made in a very similar way to the old hguc esf kits, that worries me a little bit. The old hands fall apart too easily, is that a thing with this version too?

[@w3llplayedMTL]

Hey vegeta were can i get 1/100 and 1/144 scales articulated hands?

[@DA9xDC4]

Would these builder parts hands look in scale to the 1/144 hg 0 gundam?

[@cloudhering]

What's the name of the MS you used for the 1/100 scale hands?

[@jeoboy]

Would the 1/144 scale hand fit/look good on 1/100 Wing kits?

[@lockon719]

so these would work on mg wing gundam custom then

[@datsun240zrallycar]

Could you review the MG GM Quel sometime?

[@jeromeesquivel576]

hey im just asking if the ms hand 03 and ms hand 01 is compatible for seed kits or it is only for uc beacuse i bought a ms hand 03 it is not compatible for my hg seed kits 1/144 scale can you help me

[@alepsalleh9827]

does this fits sazabi ver ka?

[@Yalamastyle]

Are the fingers capable of moving?

[@HorribleGamingFun]

would i be able to use the 1/144 hands on the likes of an old Red Frame Astray HG?

[@TheGreatDayne1983]

They make three 1/144 sets, one for regular, one for slightly bigger sized mobile suits, and one slightly smaller .

[@tylerryan2187]

Can you use theses with real grades

[@fajardiniarikamil2712]

Anyone had tried it on RG destiny gundam?the current hand unit is not appealing for me ,or maybe mine is defective product

[@khairulamirin5931]

is this works on rg ?

[@saadmirza4221]

Will it hold sword weapons?

[@Victor89081]

does it fit to SD gundam????i mean 1/100

[@AstrayZack]

i wonder how this would fit in a MG strike Gundam?? :/ as anyone tried it?

[@geraldkitchen6520]

is the ms a hg

[@MIXDJ3000]

would this work for 1/144 00 quant,anyone know?

[@Steelersfan355]

Its a shame they dont have beam saber hands

[@TDizon3]

Y no mg quel review :(

[@Miestwin]

Jesta still unpainted. Why? ;_;

[@237Grimlock]

so?

[@nazrulzero]

stupid Bandai, they forgot to include hand grip for melee weapon

[@landwand]

Nah, they're entirely fix-posed.

[@xs3tsunax]

GM quel

[@Deathsaurus1989]

no

[@tythonb]

fiiiiiiiiiiirst on anything!

[@xMurakumoUnitx]

Does anyone know which set of hands that would be a perfect fit for my HGUC Unicorn? The 01, 02, 03 or 04?

[@xMurakumoUnitx]

Awesome, Thanks man. Keep up the good reviews!

[@mightyrobot42]

How do the 1/144 ones compare with the High Grade Build Custom hands?