I’m in the automotive service industry here in the states, and I have worked with 100’s of body shops over my 35 year career. I must say that this is some of the best work I’ve ever seen done with what they have available to them, awesome job.
I must compliment these Men on their ability to bring this bus back to life as if nothing had happened to it , being able to work with such Primitive tools and conditions , their skills are beyond apprehension , I hope that they are appreciated for their abilities ,and well rewarded , I would like to see that their health and saftey conditions would be some what better , they should be very proud of their finished product , Top Class Job well done boys
Very good point you bring up about safety. Soo important, but often ignored in poor countries. Otherwise, awsome job they have done, and reused most of original material.
I like the devestation of the damage and the energy in the repair , pulling all that steel back into shape, and reusing it after incredible stretching and shrinking. Then the finesse of the filling, sanding and repainting. Excellent. Bravo Greetings from Australia
I have to keep in mind that this is a hard working truck, where function is the major requirement. They are not repairing to new as built condition. This is a repair, not a restoration. Those guys took a badly damaged corner section, took it apart, straightened out some quite badly mangled sheet metal using hammers, chains, hand wenches, gas torches and surprisingly little body filler, primer and paint. Put it back together and returned it to pre crash condition over all. The only parts needing replacement were lights, light covers and reflectors. An impressive level of work for a basic shop with minimal tooling and workers who are quite skilled with working with sheet metal structures and panels. This truck will go back into service hauling people and stuff around and appear like it had never been crashed considering the high level of damage it had. Good job guys!
My dad, now gone, told me a tail of one of the squaddies who'd taken the colonels car out for a spin and crashed it. My dad told him of a local family who were skilled at rebuilding damaged things. Five days later, the car was returned, just in time for the colonels return and looked immaculate. Dad told me there were people in India as it was in WW2 who had amazing skills and could make a silk purse out of a sows ear.. Here in the UK, we'd just write that off. Fabulous video guys
Ладно угол выстукивали - можно понять но бок вполне можно было новым листом из чернухи заменить за копейки .Там форма простая. И времени ушло-бы меньше на работу и сама цена работы была-бы ниже!
You all did an amazing job repairing that van. However, that type repair just wouldn't work in America because the labor hours it took would drive the cost way up over the price to accomplish such labored repairs. But in your area I guess it is worth the time...
All that reworking most likely fatigued the metal to be weaker but with that said. Dang it's amazing watching videos like this where people work with what they have. They are more artist sculptors than a body work person.
Wen i wase a pannelbeater i work for 42 years ase a panel beater in Souf Africa and New Zealand this work are some of the best no exspensif tools but top work come to NewZealand we neet u heer lot of work and good money good life beatful contry
Separate and apart from the fact these guys have tools that are only slightly evolved from the Middle Ages, they do outstanding work restoring that van to something usable and visually appealing. Job well done.
Крутые ребята!Когда они отрезали и выкинули я думал сейчас донора состыкуют,да не тут то было!Имея инструмент,горелку и молоток под открытым небом такой результат не каждый сделает!!!!
you all are real craftsman,but i keep wondering how you all are working without any safety ,open slippers no gloves etcetera ,this could never happen here in europe,but any way keep on repairing those trucks guys 👍👍👍👍
Excellent repair, very impressive. There was this frenchman in Dubai who had a classic Citroen car, I think it was a DS9 of the 50's or 60's era, back in France that needed a full restoration. In France it would have been costly to get it done, especially the bodywork, so he got it shipped to Dubai and had one of the workshops do the restoration and they did a good job. Then he took it back to France, but I'm not sure if he drove it back or it was again shipped.
for god sake they performed a colossal job right there, they managed to save all the panels instead of replacing them and that's huge because of the big damage up there, but that will leave a lot of dents in the side panel that can't be discovered before the paint job and some of those dents sadly cannot be fixed with fillers because the panel is bent
Da kann mann mal sehen was mann mit einfachen mitteln alles machen kann Ich kann nur sagen das solche leute / menschen mir höchsten respekt abringen Einfach top
Muy talentosos trabajadores de la vieja escuela, con pocos recursos saben arreglar todo, pero fallan totalmente en los equipos de protección personal, mascarillas, gafas... También deberian soldar con semiautomática, en Europa los fabricantes de automóviles prohibieron hace años el oxiacetileno en reparación de carrocerías!!
I've watched many video's of people from India and Pakistan do so much with very little technology, real craftsman of their trade,you have my admiration of your skills.
Les carrossier Pourrais je pourrais prendre exemple Sur c'est Travailleurs qui ne se contentent pas de changer Les éléments de carrosserie Mets repart avec Peu de moyensciter
Amazed at what they can do with so little. But that bodywork was lumpy as hell😬 I’ve been a bodyman for 30yrs now. I couldn’t get away with ever putting out that kind of work. Did great on metal work though 👍
What might not be obvious is these guys skills with a gas torch.. they are unreal.. plus their skill at applying a skim of filler - again, massive skills that people who don't do this sort of work might overlook. They make gas-welding these thin panels look a doddle - try it, report back. They also make applying filler look easy - again, try it, report back. These guys quietly have off-the-scale skill levels. I know as I do the same work but naah - don't have the same level of skill as these in all honesty and I have a lot of more alledgedly "better" equipment. That guy casually heat-shrinking the dents with the gas torch while his pal hammers on them - it's to get rid of oil-canning where the panel has stretched - give that a go, see how you fare - it's bloomin massive skillz. Then they grab the worlds crappiest paint-gun, outdoors, no booth - and do a very very respectable paint job that over here would require 100k of equipment.... watch their gun spray - it's spitting, missing, the air supply is all over the place - and they still do a decent job.. again - massive skillz. No painter here could cope with their 500 quid devilbiss not running the perfect pressure at the gun-regulator - the job would turn out crap - these boys don't even have a pressure regulator on their absolutely garbage 20 quid paint-gun & they still get a great finish - and that - that's Skill. We have all the gear & no idea - these have close to no gear & all the idea.
This team of workers are an amazing talented bunch. To think they accomplish what they do almost entirely with sweat and muscle and outdoors in the Indian heat, is just fantastic. My only complaint is I would have loved to see the bus owners reaction and surprise when he came to pick up the bus.
Amazing skills. Just imagine setting this pair loose in a decent body shop with proper tools and access to new panels. Shame about the bus - needs new seats, new windows and probably new engine and gearbox too.
What an incredibly honest repair. We used to say give some body man enough Bondo and he can make a VW into a Cadillac. Not these guys. !00% legit repair. Kudos.
I’m in the automotive service industry here in the states, and I have worked with 100’s of body shops over my 35 year career. I must say that this is some of the best work I’ve ever seen done with what they have available to them, awesome job.
В России , в горной республике Дагестан есть мастер по ремонту кузовов автомобилей по имени Руслан . Он этим мастерам может показать мастер класс.
OSHA would lose their mind.
Osha are bunch of girls
I must compliment these Men on their ability to bring this bus back to life as if nothing had happened to it , being able to work with such Primitive tools and conditions , their skills are beyond apprehension , I hope that they are appreciated for their abilities ,and well rewarded , I would like to see that their health and saftey conditions would be some what better , they should be very proud of their finished product , Top Class Job well done boys
Safety squints: ENGAGE!
Very good point you bring up about safety. Soo important, but often ignored in poor countries.
Otherwise, awsome job they have done, and reused most of original material.
I like the devestation of the damage and the energy in the repair , pulling all that steel back into shape, and reusing it after incredible stretching and shrinking. Then the finesse of the filling, sanding and repainting. Excellent. Bravo Greetings from Australia
Руки откуда надо растут. Хорошая работа. Удачи вам парни.
I have to keep in mind that this is a hard working truck, where function is the major requirement. They are not repairing to new as built condition. This is a repair, not a restoration. Those guys took a badly damaged corner section, took it apart, straightened out some quite badly mangled sheet metal using hammers, chains, hand wenches, gas torches and surprisingly little body filler, primer and paint. Put it back together and returned it to pre crash condition over all. The only parts needing replacement were lights, light covers and reflectors.
An impressive level of work for a basic shop with minimal tooling and workers who are quite skilled with working with sheet metal structures and panels.
This truck will go back into service hauling people and stuff around and appear like it had never been crashed considering the high level of damage it had.
Good job guys!
Yup ..GREAT JOB !!!
MashaAllah this is a great work shop 👏 Allah stay blessed hem good work
Excelente trabajo lo mejor que e visto con dedicación y empeño todo es posible 👍
Бессмертные люди. Перчатки, очки, фартуки, ботинки-ничего нет!
Бля пол автобуса раберут чтобы эту мятину зделать и-то подрехтуют нагреют и обратно заварят на место
ну один в один как на росии))))
@@СергейЯрошенко-д6ъ серГей
Ну там их много, придут новые и сомкнут ряды..
им мировозрение и менталитет не позволяет
Amazing craftsmanship considering the tools you use, great work 👍
ماشاءالله تبارك الله
عمل رائع جدآ 👍🏼👌🏼
🇸🇦🇵🇰💚🇵🇰🇸🇦
My dad, now gone, told me a tail of one of the squaddies who'd taken the colonels car out for a spin and crashed it. My dad told him of a local family who were skilled at rebuilding damaged things. Five days later, the car was returned, just in time for the colonels return and looked immaculate. Dad told me there were people in India as it was in WW2 who had amazing skills and could make a silk purse out of a sows ear.. Here in the UK, we'd just write that off. Fabulous video guys
These are Pakistanis working in saudi Arabia
It’s tale, not tail.
Your Dad in india was squaddie...in British Empire that was dominant India before 1946 independance..am I right?
,
@@MUN.A1988 good old days
すげえ。切り取った鉄板部分は、たいてい部品取車両から切り出した部分と交換するけど、叩いて元に戻すとは、、、
本物の板金技術者でないと出来ない技だ。
こりゃ驚いた、、、
Unbelievable that you managed to repair those panels, first class tradesmen 👍👍
Ладно угол выстукивали - можно понять но бок вполне можно было новым листом из чернухи заменить за копейки .Там форма простая. И времени ушло-бы меньше на работу и сама цена работы была-бы ниже!
Молодцы.Уважаю.Сам делал такое.
@андрей По номерам вроде как саудиты, не бедная страна, или сейчас с ценой нефти так плохо
@@РусликСуслик-э7л скорее всего это Йемен а машину просто оттуда притащили списанную после аварии
Не саудовцы, а пакистанцы
@@РусликСуслик-э7л
Сначала выстучали,а потом сплошняком газом заварили.....зачем было выстукивать? Все равно после такой сварки потянуло ужасно.
You all did an amazing job repairing that van. However, that type repair just wouldn't work in America because the labor hours it took would drive the cost way up over the price to accomplish such labored repairs. But in your area I guess it is worth the time...
Why did you feel the need to mention America?
Это у вас в Соединенных Штатах расценки труда высокие, а это Пакистан где люди выживают и работают за низу оплату труда.
Сушильная камера? Камера для покраски? Не не слышали😂😂😂😂😂
Под шагрень и так сойдёт)
All that reworking most likely fatigued the metal to be weaker but with that said. Dang it's amazing watching videos like this where people work with what they have. They are more artist sculptors than a body work person.
It's probably a ladder frame bus so the strength of the body probably doesn't matter too much. Cool fix
Thats what I call skills! Greetings from Germany. I am absolutely amazed with what kind of equipment you achieve this kind of quality.
The bus is as good as new ! - Great skillful repair - Well done guys !
Wen i wase a pannelbeater i work for 42 years ase a panel beater in Souf Africa and New Zealand this work are some of the best no exspensif tools but top work come to NewZealand we neet u heer lot of work and good money good life beatful contry
Separate and apart from the fact these guys have tools that are only slightly evolved from the Middle Ages, they do outstanding work restoring that van to something usable and visually appealing. Job well done.
*С 5 метров красиво выглядет и пойдёт))*
Крутые ребята!Когда они отрезали и выкинули я думал сейчас донора состыкуют,да не тут то было!Имея инструмент,горелку и молоток под открытым небом такой результат не каждый сделает!!!!
Главное правило если с 3х метров выглядит хорошо, то хорошо, если нет, то отойди еще на 3 метра)
you all are real craftsman,but i keep wondering how you all are working without any safety ,open slippers no gloves etcetera ,this could never happen here in europe,but any way keep on repairing those trucks guys 👍👍👍👍
Safety squints engaged
No insurance, no medical facilities close by, you learn to just be careful, and drugs and alcohol are not an issue either.
@@thepubliceye nothing safe or careful about grinder sparks in the eyes
@@juanfo7307 You just need to be smart enough to not let that happen. If you are smart enough you won't throw sparks at your face.
@@thepubliceye Yeah I'm really dumb so I wear safety glasses, gloves and steel toes
Шпакля выводит все.Молодцы ребята .Удачи.
Great job guys,but Please wear a mask when rubbing down body filler &.paint spraying for your good health.
Excellent repair, very impressive.
There was this frenchman in Dubai who had a classic Citroen car, I think it was a DS9 of the 50's or 60's era, back in France that needed a full restoration. In France it would have been costly to get it done, especially the bodywork, so he got it shipped to Dubai and had one of the workshops do the restoration and they did a good job. Then he took it back to France, but I'm not sure if he drove it back or it was again shipped.
Son unos maestros, Excelente trabajo felicitaciones.
Great work👌👌👌👌👌
for god sake they performed a colossal job right there, they managed to save all the panels instead of replacing them and that's huge because of the big damage up there, but that will leave a lot of dents in the side panel that can't be discovered before the paint job and some of those dents sadly cannot be fixed with fillers because the panel is bent
Вы просто супер вам нужно работать в страховой компании
Amazing job. Here in America, they would total the vehicle.
Screw the EPA, they don't need no stinking spray booth. Just spray it out in the lot.
Good video camera
Good editing 👍
معلمين الله يعطيكم الصحه والعافيه شغل مرتب يسلمو الايادي انا بحب شغلكم
MITSUBISHI-FUSO ROSA‼︎ 🤩✨
Great video❤
Well done. Nothing was wasted and great craftsmanship.
Не бит не крашен, ездил аккуратно :)
As salamu aleikum,
from Russia !✋🇷🇺
Amo esses videos.......acho tudo inacreditavel.....a capacidade deles é magnifica......verdadeiros mestres do metal......parabens!!!!!!!!!!!!
в страховой компании такие работники на вес золота из битой тачки с родних деталей делаете тачки.даже покупать не нало железо
Да и работать будут за миску плова.
Amazing job, I am astounded how you did it, brilliant Workmanship.
Da kann mann mal sehen was mann mit einfachen mitteln alles machen kann
Ich kann nur sagen das solche leute / menschen mir höchsten respekt abringen
Einfach top
Love you from Pakistan Great job weldone
Best example of PDR I’ve ever seen! That’s Painless Dent Removal of course!
Painless. 😂😂
Now that was very impressive to watch these men do some incredable work with low quality tools. Very good job, well done.
Hello from Azerbaijan. God blesses you, because you have golden hands and write way.
Mis felicitaciones por ese vuen trabajo
Listo para otro vergaso jajajajajaja
ESOS SON LOS VERDADEROS ARTESANO...SI SR. NO LOS DE HOY QUE PONEN TODO NUEVO POR FUERA Y POR DENTRO UNA BASURA
Old school body shop , very Nice 👍👍
Красавцы. Как у нас) Не бит не крашена. Все норма
Parabéns ótimo trabalho de qual país vocês são. Mashallah
باكستان سندباد
PAKISTAN = PAIS
Muy talentosos trabajadores de la vieja escuela, con pocos recursos saben arreglar todo, pero fallan totalmente en los equipos de protección personal, mascarillas, gafas... También deberian soldar con semiautomática, en Europa los fabricantes de automóviles prohibieron hace años el oxiacetileno en reparación de carrocerías!!
Esil senetkar .sizin kimi senetkarlar nadir tapıntı sayılır.
Siete dei veri artisti. Saluti e complimenti dall' Italia.
Just amazing craftmanship, it's as good as new
Seems these guys are Pakistani but working elsewhere in Dubai or Saudi Arabia Middle East country , well , good professional with their profession 👍
TOP JOB GENTS , MY COMPLIMENTS - FROM BRAZIL
Thank you
Trop fort ces pakpak , nous en france peux de carrosier l'aurait fait et les assurances aurais mis le bus en épave direct , bravo pour ce beau travail
Here in the USA we do that same thing.... except it's called REPAIRING😉
プロの技を感じる
仕事が上手い男はカッコイイ
I've watched many video's of people from India and Pakistan do so much with very little technology, real craftsman of their trade,you have my admiration of your skills.
Really a highly Skillful, Technical and Job of Using Wisdom. Thanks a Lot for Expert Preparation & Uploading of the Video.
Les carrossier Pourrais je pourrais prendre exemple Sur c'est Travailleurs qui ne se contentent pas de changer Les éléments de carrosserie Mets repart avec Peu de moyensciter
That's actually an insane repair! Impressive stuff
thats a lot of work..at the same time all that metal is fatigued and weak I wouldnt want to be on that bus in the rear anymore
Great work 👏 👍
Amazed at what they can do with so little. But that bodywork was lumpy as hell😬 I’ve been a bodyman for 30yrs now. I couldn’t get away with ever putting out that kind of work. Did great on metal work though 👍
What might not be obvious is these guys skills with a gas torch.. they are unreal.. plus their skill at applying a skim of filler - again, massive skills that people who don't do this sort of work might overlook. They make gas-welding these thin panels look a doddle - try it, report back. They also make applying filler look easy - again, try it, report back. These guys quietly have off-the-scale skill levels. I know as I do the same work but naah - don't have the same level of skill as these in all honesty and I have a lot of more alledgedly "better" equipment.
That guy casually heat-shrinking the dents with the gas torch while his pal hammers on them - it's to get rid of oil-canning where the panel has stretched - give that a go, see how you fare - it's bloomin massive skillz. Then they grab the worlds crappiest paint-gun, outdoors, no booth - and do a very very respectable paint job that over here would require 100k of equipment.... watch their gun spray - it's spitting, missing, the air supply is all over the place - and they still do a decent job.. again - massive skillz.
No painter here could cope with their 500 quid devilbiss not running the perfect pressure at the gun-regulator - the job would turn out crap - these boys don't even have a pressure regulator on their absolutely garbage 20 quid paint-gun & they still get a great finish - and that - that's Skill. We have all the gear & no idea - these have close to no gear & all the idea.
شغل ميه ميه يا مدير
Well done…….looks great 👍👍
boa tarde meus parabéns vcs trabalham muito bem
You guys did a great job 👏
Средства защиты средств дыхания?не,не слышал!)))
Génial Master réparateur
Brilliant repair 👍😎
you guys are really amazing! Bravo... 🛠🎨👌👍
НормН сделали,Вы на ПАЗиках стареньких не ездили.Там пленкой рекламной косяки заклеевают.
Well come to pakistan. Hard working & skillful people.
Doskonała robota 👍👍👍, chłopaki używajcie okularów i osłon na szlifierkach...
This team of workers are an amazing talented bunch. To think they accomplish what they do almost entirely with sweat and muscle and outdoors in the Indian heat, is just fantastic.
My only complaint is I would have loved to see the bus owners reaction and surprise when he came to pick up the bus.
que barata tiene que ser la mano de obra para que hagan estas obras de arte. son unos verdaderos carroceros de los de antes.
Вам бы ещё полуавтомат и вообще будет огонь, и почему такие сиденья засранные
Возят работяг на объект
Во время аварии испачкались
@@antonchpokin 🤣
Great job done by Pakistani skill workers 👍🔩🛠🏆🇵🇰😍
От 0:00 до 0:30 подумал что это самый быстрый ремонт, Побытый, отрихтованный, покрашен, все!
excellent skills. thanks for showing us.
素晴らしい技術と忍耐力❗️
Amazing skills. Just imagine setting this pair loose in a decent body shop with proper tools and access to new panels. Shame about the bus - needs new seats, new windows and probably new engine and gearbox too.
so sweet the duck familie at 04:05 🤣🤣🤣🤣
I love watching these guys, rubber bands and paper clips, they can repair anything.
With duct and string you can fix anything. My old granddad's old saying
Ótimo trabalho 👏👏
What an incredibly honest repair. We used to say give some body man enough Bondo and he can make a VW into a Cadillac. Not these guys. !00% legit repair. Kudos.
Ну все, не бита не крашена, в одних руках, дедушка с бабушкой на дачу ездили, да и то, в сухую погоду 😂😅😅😅😅
I'm surprised again with every video of yours, what kind of work you do and make the almost impossible possible, you have great workers 👍😊
*It's spectacular !* *I am in admiration !!!*
Despite your modest workload, you are truly tyrants, masters at work, and artists. May God grant you success for what He loves and is pleased with.
These men are truly genius how the hell did they repair that bus just awesome 👍 .
That cutting disc is really dangerous 😳 ☠️
Типичный ара сервис,у меня сосед ещё лет десять назад так работал .И неплохо с виду получалось.Сварка только газ, кусок рессоры и молоток.
Nice job 👍
Felicitaciones! exelente trabajo, a la vieja escuela, planchando, nada de cambiar piezas, eso mismo hacia mi Papà
Wow Nice worck
Thanks for watching
I like dis job is și rare