quality work as always mate . what a cracking little rifle and very accurate indeed at 50 yards . do you want to come and shoot my 50 yard comp target this month 🤣🤣🤣🤣🤣 great job with the mech mate those t-shirt and other bits and bobs look very nice and as expected with all your gear quality items 👍
hi i believe you stated that the old shroud might have been pushing the barrel somewhere causing poi to be different to yr one ? does this mean that the internals of the factory one were not concentric with the barrel ?
I've heard that there have been regulator issues with the Krait rifles which have needed to be replaced and upgraded several times and are apparently now onto the 4th version of regulator and new regulator housing which has resolved the issue. Is this the latest updated 4th version of the Krait regulator?
Can the magazine spring tension be increased? When the barrel is pointed down, a pellet falls partially into the barrel which makes it impossible to remove the magazine until all pellets have been fired. With the barrel pointed up, a pellet falls backwards against the probe when the cocking lever is cycled which causes a jam. Any suggestions? Thanks Larry Guinn. USA
Excellent video👏🏼👏🏼👏🏼👏🏼, but if you allow me some advice 😅... I would avoid staining the bevel of the metal shaft and the contact area of the POM with grease, this will prevent particles from adhering that damage the POM, causing leaks in the gasket.👍🏼👍🏼👍🏼
Yes the valve seat is quite a long way down from the o ring so the face is clean although it looks in the vid like it's close and gets grease on it but it doesn't 👍 thanks for watching
Another great video 👍 Have purchased an o'ring kit for future use (always like to be prepared 😁) Do you think the extended pellet probe improved accuracy by seating the pellet fully into the rifling? And will you be making these for sale? Thanks for Another great video. Tom
Thank you, it may have made a marginal difference to accuracy i don't think we will be making them as the inletting on the barrels probably varies a bit so you may make it worse by fitting one 👍
Saw this gun at the range today ..... The shroud is absolutely amazing! Fantastic design and build quality 😍
Thank you
Loving the rebuild and the little tweaks to the innards. Got to love a bit of merch too 🙂
Thanks Tim, the Merch is just to help fund the vids
Another great video very informative.Saw you shot this on Saturday,very impressive top work .
Thank you 👍
As always fantastic work, wow the shot count is fantastic well impressed, top notch video as always Jeff thanks for sharing Cheers 👌👌👌👍👍👍👍👍👍
Thank you 😁
Excellent video.Thanks fo sharing your effort.
Thanks for watching!
love the t shirt....how can you tell if the block is mark1 or mark 2 i cant seem to tell the difference
Good quality video and work as always. 500 shot count is a fantastic achievement well worth the effort you have put in to the build. 👍👍
Thanks yes 500 shots from 200 bar is fantastic
Really interesting and informative video thanks for sharing 👍🏻
Glad you enjoyed it
thank for video , i want to ask about the method and grit number to polishing or grit number the chamfer on regulator peek face
we go up to 4000 but 2000 is good enough you just want a very smooth finish
Can I ask what thicker O’ring size you used on the valve adjuster to stop the leak. Thanks.
Love the Merch, the shot count on that is insane! 😁😁
Thank you, the merch is just to help fund the channel 👍
Great video guys👍🏼 as always
Glad you enjoyed it
quality work as always mate . what a cracking little rifle and very accurate indeed at 50 yards . do you want to come and shoot my 50 yard comp target this month 🤣🤣🤣🤣🤣 great job with the mech mate those t-shirt and other bits and bobs look very nice and as expected with all your gear quality items 👍
Thank you, it is very good i am very happy with it 👍
Awesome 👍 very interesting as well
Glad you enjoyed it
It's a really nice to shoot and impressive rifle after needing to make several custom parts to achieve this.
our one shot great out of the box but you can always make them better 😀
@@sub12airgunners You shouldn't need to that's the point.
Hi there
Complely of topic, just wondered what your opinions were on chokes better with or without
I think less pellet fussy with a choke, but i have had guns shoot great with and without a chokes
Do you have any footage showing how to polish the parts?
we have done polishing in other vids so we didn't show it in this one 👍
hi i believe you stated that the old shroud might have been pushing the barrel somewhere
causing poi to be different to yr one ? does this mean that the internals of the factory one were not concentric with the barrel ?
I think on our one it was the front boss the shroud screwed to in the block that was giving the issues
Are these extended pellet probes now standard on all Krait rifles or has the extended probe only been made for your own personal use?
we made the probe for our gun, i don't think Airmaks are going to make them 😔
Question, what do you do to make your gauges sit at the proper direction? Maybe you can do a short video on that modification.
when we do the next gun we will do a bit on timing the gauges 👍
I've heard that there have been regulator issues with the Krait rifles which have needed to be replaced and upgraded several times and are apparently now onto the 4th version of regulator and new regulator housing which has resolved the issue. Is this the latest updated 4th version of the Krait regulator?
i think the one we have is the MK3 version but it works perfect on our gun 😀
Can the magazine spring tension be increased? When the barrel is pointed down, a pellet falls partially into the barrel which makes it impossible to remove the magazine until all pellets have been fired. With the barrel pointed up, a pellet falls backwards against the probe when the cocking lever is cycled which causes a jam. Any suggestions?
Thanks
Larry Guinn. USA
I think there are updated mags available now 👍
nice one 😁😁
Thanks
hello the link for the O ring box does not work unfortunately i can't find it on eBay how could i purchase a box please regards Paul
Hi we stopped do the kit's as they changed the reg 🤨 so we can do the kit for you but it may not have the correct o rings for the reg👍
Are all the air gauges 1/8 BSP?
hi yes as far as i know
Excellent video👏🏼👏🏼👏🏼👏🏼, but if you allow me some advice 😅... I would avoid staining the bevel of the metal shaft and the contact area of the POM with grease, this will prevent particles from adhering that damage the POM, causing leaks in the gasket.👍🏼👍🏼👍🏼
Yes the valve seat is quite a long way down from the o ring so the face is clean although it looks in the vid like it's close and gets grease on it but it doesn't 👍 thanks for watching
Excellent!👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎
Thank you! Cheers!
hey, where we can buy this carbon shrould ? thank you
hi sorry you can't buy the shrouds we don't make them to sell 👍👍
Incredible shot count from a 200 bar fill,.Might have to treat myself to a t-shirt when my funds have recovered.
Thanks mate 👍 it is an epic shot count 😁
🙂🙂🙂
😀
Another great video 👍 Have purchased an o'ring kit for future use (always like to be prepared 😁) Do you think the extended pellet probe improved accuracy by seating the pellet fully into the rifling? And will you be making these for sale? Thanks for Another great video. Tom
Thank you, it may have made a marginal difference to accuracy i don't think we will be making them as the inletting on the barrels probably varies a bit so you may make it worse by fitting one 👍
Hi great channel . can not see we’re to buy t shirts
Thank you
personalised.clothing/sub12airgunners
Gracias, rezare un poco para que consiga un rti prophet ll.
What size are the ptfe washers plz