BRK Ghost assembly

Warning, these air rifles contain high pressure air. This video is for information purposes only - we strongly recommend you seek the advice of a trained professional before attempting any work on an air rifle.

[@alanmullock381]

👍👍👍👍👍👍👍👍👍👍thanks Jeff

[@leec8592]

A fantastic re-build video with great commentary .... Thanks for doing this J

[@sunrisetacticalgear2676]

Thank you, this gives me confidence in purchasing this rifle.

[@markdyson4904]

Great video!!

[@skalliwag2766]

Brilliant, thanks for making the instructional video

[@kipseg1]

Heel blij met dit filmpje

[@redgum1340]

Very nicely machined gun. Looks like it should last a long time and give good service. Thanks

[@themulesheriff3009]

Great video

[@kennymakavelli]

❤👍 Thanks

[@a.restudioarquitectura4635]

Hello Friend, excellent video for maintenance issues, I had a problem, I hope it is not serious, but the following thing happened to me: I dismantled the rifle so I could only clean the barrel and the rest of the chassis without removing the regulator, I removed the bottle, I released the air from the plenum, when I finished cleaning I reassembled but when I put the bottle in, air began to leak through the barrel and When I try to reload the lever it gets stuck in the middle and doesn't allow me to push the lever all the way back, therefore the air keeps leaking, I removed the bottle but it still won't let me reload correctly, I hope you can advise me on this problem, greetings from Morelos, Mexico...

[@tc5427]

Excellent Jeff, thank you! Regulator questions: The sealing disc, no requirements that the cut out is aligned in any specific way? Did. you use silicone grease to lubricant the belleville spring discs? Is there a maximum set pressure not to go above on the Ghost's regulator? again greatly appreciate your videos and expertise!

[@sonan7216]

To be continue ?

[@DJSpinj]

What is the purpose for that center grub screw on the chassis directly on the valve (on which you apply grease at 11:05 of the video)? I’ve noticed that when I fire a pellet while touching the cocking lever the lever moves as if air is leaking through something to cause it. Could it be that since the rail rides over that grub screw an air blast is emitted from around it (grub screw) and causing the rail/cocking lever to move?

[@armandonavarro7217]

what size is the plenum please in cc? thank you Sir

[@tommydaddio6724]

Help ….frist thank you for all the videos with out you. I would be lost. ….with that I bought the extension to go on the cock and lever. I never sent a longer screw should have day.