Building an excavator grading beam from scrap metal
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2020
- I'm building a grading beam for a mini digger / mini excavator, (Yanmar sv17), from scrap metal I had home. Cutting, welding and some lathe work for the roller bearings.
It is a really cheap and easy build especially if you make it without the roller attachment.
I will use the grading beam in future videos for grading and leveling.
Main tools used in this video:
Welder: Migatronic Automig 273
Metal bandsaw: Femi ABS NG120
Lathe: Blomqvist 600
Thank you👍 I plan to make one someday. I tried just dragging a pallet behind me, and it works. Also tried to attach pallet with some extra weight to excavator👍
Wow, Bach!
Very interesting idea. It is somewhat limited to machines with tilt bucket options, which is not as common as a thumb. Without the tilt option you have to keep adjusting grading blade to get the machine to correct pitch, then, once you swing the house to another position, you are out of level once again. I can grab just about any piece of wood or steel with my thumb and achieve similar results, but I have to keep adjusting the angle to match the grade I need. When I'm done though, or need to add material, or excavate more aggressively, I can just toss the wood/steel off to the side and keep digging with the bucket that is still mounted on the machine. You have to disconnect and go find where you left your bucket again, or use another machine to bring more fill in. Every tool has advantages and disadvantages. Great welding project!
You're right about that! I have not even thought about it. Here in Sweden, almost nobody is using thumbs. Almost everyone uses tilt or rotor tilt. However, I am very eager to mount a thumb on my machine. It seems to be a very good accessory.
Great idea, but you need to get the attachment level and then back up in reverse... this way the height of the attachment is always level vice trying to operate the attachment level. Hope this makes sense.
If we put in 3 way hitch point in compact tractor will work?!
That would surely work, good idea!
I like this idea 😃... I don't have the skills to do it, but I like it 😄
Thanks Ansari! I am sure you can learn how to make one yourself. :)
Good job comrade .
Thank you very much Troy!
I always get a charge out of videos saying we’re making something DIY out of scrap, but then proceed to use thousands and thousands of dollars in tools to do it!!
Would it be any use if I do not have a tilt head?
Diemention appropriate is crucial 1500mm fits my Mcr 8t 1350mm mcr6 should try something the width of the track frame or a little smaller , very versatile tool in the right hands
Good job bud🤙
Thanks!
2m long rsj with attachment in middle gr8 leveling bar
Hello! Can you tell me how many m2 per hour can be leveled?
Does it do what you were hoping for?
Actually I have just used it once so for for a small project but it worked really well especially with the roller. I will make movies using it when the snow here is gone.
Snyggt jobbat! Vad använder du för utrustning? Kanske kan lägga till det i beskrivningen. Den där sågen såg (haha) fin ut! Kul att du fått så många visningar och bry dig inte om Kerry eller vad han heter som gnäller på musiken, det gör han jämt, även på min kanal och jag har bett honom göra egna videos om mina inte duger. Ha det bra!
Haha intressant! Nej det är ju svårt att få alla nöjda på internet..:)
Tack för bra tips! Jag ska skriva ner i beskrivningen vad för grejer det är jag använder. Sågen är kanonbra! Innan har jag kört vinkelkap men det låter så ofantligt, och dessutom blir det mycket snyggare med bandsågen :)
What is the cost of fitting a tilty to the digger
It depends on what kind of unit really, but I would say between €650-1000 for a regular tilt like the one mounted on my machine.
What kind of tilt quick hitch is that?
It is a common tilt quick hitch, I don't know the brand tho. The quick connector for the bucket is called s30, a common system here in sweden. S30 for small machines, s40, s50 and so on, depending on machine size.
I'll tell you where Minitilt is from
Good job. What dimensions has? Lxl ?
Thanks! It is 142cm, so a pretty small (or handy) one 😊
0:58 what kind of magnet is this and where can i buy it?
Hi, it is a magnetic sweeper. There are different brands if you search on google or amazon. The one im using is this one:
www.sagro.se/sv/artiklar/magnetplockare-med-hjul.html?gclid=EAIaIQobChMIj_zvjd24_AIVskeRBR230AC-EAQYAiABEgIDbfD_BwE
It behooves me why with a lathe at your use WHY WOULD YOU CUT THE SMALL BARS TO MAKE THE SUPPORT ON THE ROLLER when you have the lathe that you can cut the inside of the pipe and put the pin in it in one swift action. this would save the time and trouble of finding the size needed to make 4 extra pieces and could save making the cap's. By cutting the circle for each end you would have a more concentric circle for the roller and it would save time putting all of this together and .you would be welding the back of the pin and you could even double the piece for more strength. Other wise it all works.
나에게 파시죠..
Some of us do not watch construction videos that play music.
Goodbye.
Hi Kerry, hehe I actually agree with you, I normally prefer without music. But as this video is in time lapse and quite long, I thought it could be nice with some relaxing music in the background and thought that classic style piece did fit. But thanks for your comment, I might considering removing it if it is too annoying. Have a good day!
Do you not have a volume control on your device?
@@LoBeau53 I sure do but nobody likes watching silent videos!
The tractors make their own sound that people like to hear without the music. And people also like to hear the operator talking about the equipment or the job. They don't need music covering him up either especially since the music has nothing to do with the video or the contents.
@@TF856 well you should just move along then
@@LoBeau53 reasonable people usually gladly accept helpful suggestions on how to improve their videos.
They want to know what people like and don't like about their videos.