Taidampa jättää tuon tampparin rauhaan ja seuraan maailman menoa täältä Terexin hytistä, siis jatko-osaa ei tule, muita kone videoita kylläkinkin on työn alla. Kiitos kun katselit.
It is easy to see that west-side of 'pond' and mostly the east side are a bit lagging behind what becomes to equipment. Make your choice, 10 machines for one job at site or one machine with 10 jobs at site? In scandivavia we do with that second option, because we can and there are developement on equipment. No anything personal, do not suck peas to nose :D
Woodchips for road, where you get this idea?? He is grading 0-16 mm crushed gravel for asphalt pavement base/footing and this is sidewalk. Similar routes where wood products can used as a surface, are jogging / ski trails and sawdust is used there.
well, because gravel gets swept away if there's a lot of water. Woodchips-water goes thru them. They are more soft than gravel. I'm olny woried aboud how long would they last.
There is lots of gravel roads, top layer is same 0-16 mm crushed on public roads, private and forestry roads are usually made with 0-31 mm. When road surface is hard, and slopings and ditches are in good shape, most water goes to the ditch and the rest is absorbed to lower layers wich drains itself to ditches. Under top surface is load supporting layer wich is more gravelly , undet that is load sharing what is mostly sand. Gravel roads needs maintenance grading every year. Main principles and structures are same in northern hemisphere, where ground freezes in winter. Winter roads are just what ground is when dithes are excavated. Gravel and crushed are used where needed on top. They must be frozen before 60-76 tonne logging trucks operate there. You must be from somewhere far south??
Taattua laatua tämän miehen työskentely. Myös video on hyvä, mutta jäänkin odottamaan, että siirsitkö kamerasi sen tamppaajan työkoneeseen, koska moisella koneella työskentely suuresti kiinnostaisi nähdä. Siis tuleeko tähän jatko-osa? Hyvää jatkoa vaan!
No thank you for such a beautiful and very well put together video. Most wouldn't look at it this way but I do. You're like an artist with that machine.
@@MrSeilorman Saisinko vinkkejä kannattaako tehdä tuon mallinen levy jos tekee enemmän nurmikoita vai mieluummin takaana pyörivä rulla tasaamassa jälkeä. Itselläni ois tälle kesälle tuollainen tekeillä. Tekeekö tuon mallinen aaltoa miten herkästi?
Hienon kysymyksen heitit. Itse pidän tekemästäni tasauslevystä enemmän kuin rullallisesta, tässä on "jalas" takana joka korvaa rullan ja tiivistää esm. mullan sekä se on näppärämpi pyöritellä puiden ja pensaiden välissä. Aaltoja tämä ei herkästi tee kunhan "jalas" on riittävän leveän noin 50-60 cm.
the rumors say he is still on that road trying to get it leveled.comon man a grader will do that 10 times faster and smooth....that bucket is a waist of money...
calin vasile i was thinking the same thing; it probably cost $30,000 to $40,000 and that road will never be level no matter how much he tries. buy a small used grader for the same price.
Luulenpa että noinkin suuri näyttökertojen määrä johtuu siitä että tuo tasauslevy oli uniikki työkalu silloin kun sen valmistin, mitään vastaavaa ei ollut markkinoilla. Nythän noita levyjä valmistaa useampikin konepaja ja lukuisia oma valmisteita olen TH-camssa havainnut, hyvä niin. Työkaluista suurin osa on oma valmisteisia. Pomen harja ja muutama kauha on valmiina ostettu.
So smooth....love it!
Прекрасная работа! Bravo!
Fantastic Seilorman:))) Werry Nice Your Eqipment there:)) I need one like this on my
Volvo Ew 160 D:)) Hello from Nicklas Norge:)))
LOOKS GOOD, NICE MACHINE....
Thanks for your kind comment...
Perfect!
great attachment,,nice an useful
That was awesome, so smooth! Road sculptor!
Thank you watched :-)
Fun to watch thanks!
This, like sharks, is soothing.
been doing that for last 15 year with a 5 tine grab and an 14 foot girder, best tool ever
Would love to do this in USA
Good luck with the construction, this is very easy to build. I want to see a TH-cam video of your new tool.
good operator! .. reel good!
Thanks!
Nice...👍👍👍🤝🙏👌🏼
Taidampa jättää tuon tampparin rauhaan ja seuraan maailman menoa täältä Terexin hytistä, siis jatko-osaa ei tule, muita kone videoita kylläkinkin on työn alla.
Kiitos kun katselit.
Good.
respect,übelst geil.fährst im ladermodus?
Nice soundtrack
👍👍👍
It is easy to see that west-side of 'pond' and mostly the east side are a bit lagging behind what becomes to equipment. Make your choice, 10 machines for one job at site or one machine with 10 jobs at site? In scandivavia we do with that second option, because we can and there are developement on equipment. No anything personal, do not suck peas to nose :D
do you have any experience using woodchips for the drive way like this? Instead of this?
Woodchips for road, where you get this idea??
He is grading 0-16 mm crushed gravel for asphalt pavement base/footing and this is sidewalk.
Similar routes where wood products can used as a surface, are jogging / ski trails and sawdust is used there.
well, because gravel gets swept away if there's a lot of water. Woodchips-water goes thru them. They are more soft than gravel.
I'm olny woried aboud how long would they last.
Heikkila Gorpuration ..i didnt see it was for asphalt.. I thought it's olny going to be a gravel road
There is lots of gravel roads, top layer is same 0-16 mm crushed on public roads, private and forestry roads are usually made with 0-31 mm. When road surface is hard, and slopings and ditches are in good shape, most water goes to the ditch and the rest is absorbed to lower layers wich drains itself to ditches. Under top surface is load supporting layer wich is more gravelly , undet that is load sharing what is mostly sand. Gravel roads needs maintenance grading every year. Main principles and structures are same in northern hemisphere, where ground freezes in winter. Winter roads are just what ground is when dithes are excavated. Gravel and crushed are used where needed on top. They must be frozen before 60-76 tonne logging trucks operate there. You must be from somewhere far south??
2:52 pull starts compacter with excavator and begins tamping with excavator. Haha
Taattua laatua tämän miehen työskentely. Myös video on hyvä, mutta jäänkin odottamaan, että siirsitkö kamerasi sen tamppaajan työkoneeseen, koska moisella koneella työskentely suuresti kiinnostaisi nähdä. Siis tuleeko tähän jatko-osa?
Hyvää jatkoa vaan!
👍👍👍👍
what's the name of the song
Music is: "Day by Day" www.freestockmusic.com. Thanks for watching.
No thank you for such a beautiful and very well put together video. Most wouldn't look at it this way but I do. You're like an artist with that machine.
Hyvännäköstä. Ei mee tavaraa hukkaan! Ei noi jenkit mitää ymmärrä! ;)
+Juha Erkkila
Kiitos. Säästäväinen pitää olla ei tuhlata ;-)
that thing is great but grading shows skills and goes much faster than that.
It's great that you liked the video.
Nopeeta ja hyvää jälkee nyt lähti kanava tilaukseen.
Kiitos positiisesta kommentistasi, kiitos tilauksestasi.
Where can I get that attachment
Almost all of the tools I actually did. I'm sorry I can not help but this is easy to do yourself.
Olen hämmästynyt, kuinka monta liitetiedostoja olet oman Terex
:-))
Wow verygood
Thank you for the comment.
Asfaltoitteko tuon pätkän vai hoitiko sen joku muu? Onko teillä käytössä levittäjää vai tuolla kaivinkoneellako hoidatte kaikki massahommat?
Tämän kevyenliikenteen väylän asfaltoi asfalttiliike levittimellä, pienet alueet hoidamme itse kaivinkoneella. Kiva kun katsoit ja kommentoit.
Hienoa työnjälkeä, tuommonen levy pitäs miunkin tehä, mutta kun täällä pohjosessa ei oikeen kukaan arvosta lisävarusteita,....
@@MrSeilorman Saisinko vinkkejä kannattaako tehdä tuon mallinen levy jos tekee enemmän nurmikoita vai mieluummin takaana pyörivä rulla tasaamassa jälkeä. Itselläni ois tälle kesälle tuollainen tekeillä. Tekeekö tuon mallinen aaltoa miten herkästi?
Hienon kysymyksen heitit. Itse pidän tekemästäni tasauslevystä enemmän kuin rullallisesta, tässä on "jalas" takana joka korvaa rullan ja tiivistää esm. mullan sekä se on näppärämpi pyöritellä puiden ja pensaiden välissä. Aaltoja tämä ei herkästi tee kunhan "jalas" on riittävän leveän noin 50-60 cm.
Larsenin pontti on kans tosi hyvä nois hommissa. P.S. Hienoa jälkeä nopeesti!
Varmaan pontistakin voi rakentaa vastaavan levyn.
Kiitos kommentistasi,
kyllä minä tuohon hommaan ottasin tiekarhun,tulisi kerralla valmista.
Oliko tässä vanha pinta rouhittu pois vai onko ihan uutta? Hyvännäköstä jälkeä.
+88petrolhead
Tämä oli kivituhka pintainen kävelytie joka oli painunut ajan myötä, 0-16 murskeella tein tasauksen.
Kiitos kommentistasi.
Классно песок ,шебёнку на дорожке ровнять с уклоном вода збегала на обочину .
teko suluxia
hes good at that
Thank you 😀
the rumors say he is still on that road trying to get it leveled.comon man a grader will do that 10 times faster and smooth....that bucket is a waist of money...
calin vasile i was thinking the same thing; it probably cost $30,000 to $40,000 and that road will never be level no matter how much he tries. buy a small used grader for the same price.
calin vasile Nope
Stephen Hart NOPE. :D
Hahaha he's got plenty of time before the little plate wacker makes it up there anyway. Please tell me this is in Russia or some shit
Floating in a grader for 30 min work is a waste of money. You have to look at what this machine is a 1 man swiss army knife
2:50 thought he was gonna use the tamper with the machine for a second lol
Une plaque 400kg pour tous ce qui a à faire c'est un peu juste ?
Un cylindre 120 aurait étais mieux non ????
juste bon a niveler des chemins dans les bois et encore
he mr sailormon its you did this?????
+soufianiz momin
Yes I did it!
Mikä kaivuri
Terex TW 110
Thats why they have flee graders to do this job...this bucket is a waist of time....
Kevyenliikenteen väylälle kirjoitetaan noin, eli väärä muoto on tuossa sinun videon nimessä.
Mainio lisälaite
Eikös olekin 😁
@@jussimakela7169 On ..Olen itsekkin samalla alalla.. Käytkö vilikasemassa ja tilaamassa. 👍
skillz.... :-)
+scoobtube247
Thanks for your comments.
bien mais il manque in peux dacsion
+leo amen
Vous avez raison :-)
Miten tällä on näin paljon näyttökertoja?!?!?
Luulenpa että noinkin suuri näyttökertojen määrä johtuu siitä että tuo tasauslevy oli uniikki työkalu silloin kun sen valmistin, mitään vastaavaa ei ollut markkinoilla. Nythän noita levyjä valmistaa useampikin konepaja ja lukuisia oma valmisteita olen TH-camssa havainnut, hyvä niin. Työkaluista suurin osa on oma valmisteisia. Pomen harja ja muutama kauha on valmiina ostettu.
Muito bon
Obrigado!
зачем такие манипуляции с песком хм...
Асфальт выходит на эту дорогу
اي دولة هاذي
عظيم
напишите трек который играет
Спасибо за ваш интерес к моим видео, я извиняюсь, но я не могу вспомнить название музыкальной композиции.
The driver must be drunk! Never seen pointless driving like this before! :)
I am exvater oprater
You have chosen a great career!👍
Elo
lots of messing about and playing,worst of all the guy with the wacker plate is keeping up
Does anybody have experience with woodchips instead of this?
Trochę nudne ale spk
+kamil skałka. Zgadzam się z Tobą, dziękuję za patrząc i komentarz
get a grader its more job suiting and faster!
+Kuba Swierczek and only like $450,000 more..... but whose counting, It's your bosses equipment, how would you know.
A grader would've done that in half the time
I could level that better with a rake