Merci pour votre commentaire. En espérant que ça puisse vous aider. N'hésitez pas à aller voir nos autres vidéos et à les partager si elles vous plaisent. Si vous avez des questions on y répond volontiers!
Than kyou so much for showing us how to remove radius arm! I was thinking to lift car and lift suspension as well. It is same thing! Now I am confident to replace those bushes! Mine is I can see perished! I noticed your one has standard type bushes not the one off center ones. I am sure your suspension is lifted slightly? No need for off centre ones??? Thanks
Je suis sur le point de remplacer mes silent bloc de tirant de pont en qualité d'origine Britpart Le model que toi tu a installé est bien différant du modèle caoutchoucs ??
Yes the black grease is graphite grease and only added on metallic parts that will be in contact with other metallic parts to avoid rust & seizure as much as possible.
Doing the super pro bush upgrade and fitting Adrenalin4x4 arms (today doing rears) I am just waiting for courier to deliver rear radius arm to axle, super pro kit. So watched your video while I wait. The rear arms were replaced last year so job is going smoothly. fronts have never been changed so going to allow a couple of days for that job latter in the week.
As this is our first time using the super pro & had them on only for about a year, I can't say how long they will do properly the job. This will also depend on many factors (vehicle, use of the vehicle, etc.)
I have just bought the full set from Gwyn Lewis and will be fitting them on my channel. I will use a press, but have taken a screen grab of your threaded bar and washers fitting the front radius arm bushings to use when I make my video if that's OK with you? You will get a shout out!!
Good job. Superpro bushes are on the long list on my 110 Puma 🤣 Out of interest what brand was the polly bushes did you replaced? And what lift kit are you running? Thanks
Thanks for your comment. We have a +2 inch lift kit & a detailed vid on our suspension is planned, so stay tuned ;) The red bushes are from the Polybush red kit, we give more info in our previous episode. At this time, we are happy with those Superpro bushes & no more steering wobble for us.
Merci pour les conseils
Je suis en train de faire exactement la même chose! C’est une bonne aide votre video 👍👍👍
Merci pour votre commentaire. En espérant que ça puisse vous aider. N'hésitez pas à aller voir nos autres vidéos et à les partager si elles vous plaisent. Si vous avez des questions on y répond volontiers!
Thank you for a very informative Video - Just about to embark on this with my Defender
Happy if it helps :)
Je me prépare a faire cette modif aussi sur un 110 TD4, merci pour votre vidéo.
Avec plaisir 👍
Than kyou so much for showing us how to remove radius arm! I was thinking to lift car and lift suspension as well. It is same thing! Now I am confident to replace those bushes! Mine is I can see perished! I noticed your one has standard type bushes not the one off center ones. I am sure your suspension is lifted slightly? No need for off centre ones??? Thanks
Thanks for your message! We replaced the stock radius arms for ones with 3° correction so no need special bushes.
do you have a lift kit ?
Je suis sur le point de remplacer mes silent bloc de tirant de pont en qualité d'origine Britpart
Le model que toi tu a installé est bien différant du modèle caoutchoucs ??
Very Interesting video, well done, thanks
Thanks to you for watching!
Good job , you answered my question about premature wear of poly bushes using correct grease . Is the black grease anti-seize ?
Yes the black grease is graphite grease and only added on metallic parts that will be in contact with other metallic parts to avoid rust & seizure as much as possible.
Doing the super pro bush upgrade and fitting Adrenalin4x4 arms (today doing rears) I am just waiting for courier to deliver rear radius arm to axle, super pro kit. So watched your video while I wait. The rear arms were replaced last year so job is going smoothly. fronts have never been changed so going to allow a couple of days for that job latter in the week.
Good job 😁👍tks.
Thanks! You are welcome!
@@offtrackfamily 😁 apreciatte tks👍
How often should you replace the super pro poly bushes?
As this is our first time using the super pro & had them on only for about a year, I can't say how long they will do properly the job. This will also depend on many factors (vehicle, use of the vehicle, etc.)
I like the mood of your maintenance videos.
Can you name the "black grease"?
Thx in advance 😀
Thanks! We were using graphite grease but you can use propshft grease if you don't have it.
@@offtrackfamily Est-ce que la graisse graphitée ne va pas user prématurément les pièces en polyuréthane?
I have just bought the full set from Gwyn Lewis and will be fitting them on my channel. I will use a press, but have taken a screen grab of your threaded bar and washers fitting the front radius arm bushings to use when I make my video if that's OK with you? You will get a shout out!!
Great! Sure, thanks! :)
Good job. Superpro bushes are on the long list on my 110 Puma 🤣
Out of interest what brand was the polly bushes did you replaced? And what lift kit are you running? Thanks
Thanks for your comment. We have a +2 inch lift kit & a detailed vid on our suspension is planned, so stay tuned ;)
The red bushes are from the Polybush red kit, we give more info in our previous episode. At this time, we are happy with those Superpro bushes & no more steering wobble for us.
@10:41 it seems that you forgot to place the long bushing on the arm's head???
Seems we would have noticed if something was forgotten
@@offtrackfamily i guess, but on the video, it's not obvious