I have a few suggestions for you. I'm retired now but I was a senior RV tech at one time. RV is just a slick way to sell cheap hardware and appliances at outrageous prices. For what it's worth, new technology has come a long way and one of the greatest improvements is in refrigeration. For the cost of an RV (ammonia absorption) fridge that performs poorly you can install a solid state or one of the new compressor refrigerators. Your cost savings can be put into better battery/inverter power. I've personally laid eyes on six RV's burned to the ground because of RV refrigerators that caught fire. Same is true for RV stoves. You can have a small (real) stove (24" apartment size) for half the cost of the trashy RV offerings. There is also a camping style 'on demand' water heater that runs on propane. It is far more efficient than either Suburban or Dometic RV tanked water heaters. Great video series. Your trailer looks great so far.
haha... I can imagine that :) Well, they definitely need to make it profitable so I can see not using quite the best components all the time. As for this build... I'm thinking super simple... I want to have power for led lights and charging ports for phones, etc,. But depending on weight I may not do a fridge or stove...was thinking of just a propane cook top stove that I can use indoor or out and just a cooler for food. I know that sounds crazy...considering building a trailer..haha.. but I want to only add the things that will be hands off and have little maintenance requirements. I’m even figuring a gravity water system as a way I forgoing a demand pump and water lines. Would still have a low tank but would only use the pump to charge the high tanks once we were parked then use gravity during the stay...just thoughts though😀
Great ideas. Thought... Those small "dorm room" refrigerators take less than 200 watts and weigh about the same as a large cooler. Easy to replace at any Walmart too. Cook top... Good move. The least used appliance in any RV is the oven. The camping LP stoves are low profile and could easily move to an outside kitchen. There are quick connect propane fittings available. You are way ahead of this game.
We use an instant pot and an air fryer to cook everything. Check into the coolers that can plug in and be an actual freezer or refrigerator. They are a game changer. I also got a in demand shower head that is a hot water heater that just plugs in. Super simple and so efficient. Great job!
If you watch videos on Singapore homes, they are incredibly light, efficient, and actually highly luxurious. Asian countries, especially sKorea, Singapore, and Japan are decades ahead in compact luxury.
thanks Jamie! It's definitely a learning curve for almost all my projects....lol... a lot of fudging and figuring to get it right ;) So the talent level isn't all that high... mostly the motivation to figure it out is though :D
Give FULL credit to people who are supportive and generously share their knowledge, because that kind of generosity is a game changer. People like this Father-in-law, up level our capabilities, and self reliance. I have people in my life who hear the info I share with them and they, one in particular, immediately ego trips like they already knew the info...ego trippers suck ! Glad to see you gave some (?)/all (?) credit for his contribution.
You’re a really cool dude, I love that you put the thought into keeping this a multi-generational family project, it will be something you’ll be able to show off to your kids and grandkids for years to come.
yes, I'm very blessed with a great set of friends and family... even on projects where I don't get any help I still often use them as a sounding board and idea check. My father in law is one of those guys who is like a subtle genius... just a wise man that seems to know a bit about everything and if its something new he can usually figure it out by deduction. I want to get a video with just him at some point:)
thanks Justin! I'm super excited about it! It's gonna be a lot of work but oh so worth it by the end... assuming I don't make it too heavy to pull that is:)
Rarely do you see a video on how to build something that is as well done as your trailer build. While others hum haw around, you were direct, smooth and moved at a fast enough pace so as to not loose the viewer's interest and get it done. Great video.
I just got to say it. You motivate the hell out of me when it come to projects. When my knucklehead wife sees me watching videos like yours. she knows it's a new project coming around the corner. LOL 🤔😏😊
Thanks Antonio! the same think happens to me... I'll be looking at something and wife gives me the 'cross examination' face... and I just have to laugh :D
You'll never need to worry about cutting the wrong size, spin in circles or waste time trying to figure out what goes where... With ryan's detailed shed plans th-cam.com/users/postUgkxT9ExVpR-3A-9rpRqx8vzXKZ3BMMTg_KH , it makes building sheds a breeze - just like putting lego bricks together! You'll be able to create the kind of shed, your neighbors and other woodworkers will secretly envy (while mumbling nice job under their breath).
1. Industrial Metal Supply is AWESOME! Have several here in L.A.. If walking thru their store doesn't get you going, it's time to hand in your "Man Card". 2. You Father-in-Law is AWESOME! Whenever that dude shows up he makes a huge contribution to your project (Greenhouse). I guess you hit the "Marriage jackpot"!
haha!!! yes 1. sooooo true! 2. Even more true!!! My in laws are just so awesome! I did win the lottery with both my wife and her family... but first my wife.... especially if she reads this....lol ;)
Thank You for taking the time to make these Videos, I just wanted to share something with you.. I worked in a busy repair shop for a number of years and some times we would work on trailers the complain was they would be ill handling or blow out tires , the problem was always , that there were car tires on the trailer, My boss would order replacement TRAILER only tires and it would fix the problem , to this day I could not tell you the difference between the two or why this happens , but it just goes to show you how much engineering goes into a a tire..good luck on the build Pete M
It's been too long since I've seen you build something! I am so looking forward to seeing all the stages of build through to the end, a travel trailer no less! Exciting, but I have no doubt it will end up being fantastic! All of your work that I've seen is incredible. 👍
Thanks so much Teresa! I'm hoping it progresses smoothly with as few hiccups as possible...lol.. but it is a learning process as this is the first time I've done something like this :)
homesteadonomics, I understand hiccups, but that's part of the learning curve, right? I still have confidence you will design & build a real show piece like you always do. ✌
I'm currently studying industrial design and we're working on a food truck so this is SUPER helpful Thank you so much for this vid!!!!!! Awesome trailer
I said it before and I'll say it again, "there hain't nothing you can't build joe!!!" LOL! You are a professional my friend!!! Can't wait til part 2. 👍👍.Jay.
This thing is going to be indestructible. FWIW, the vertical backend causes suction that will hit your fuel mileage, that's why the "teardrop" shape is ideal. If this is intended to be mostly a sleeper and the bed is going to be in the back, you won't really miss the headroom... or maybe even just make it more of a teardrop trailer and have a pop-up to an outdoor kitchen. Can't wait to see what you come up with next.
Zero Cool yes, It’s not the ideal shape...but hopefully it won’t be to much of a hit...a teardrop was what it originally was going to be until it got revamped. No much head room needed in back...but I may have some storage and a loft up there...not quite sure just yet though. Thanks for checking it out😀
Thanks Ash! I appreciate that. Variety is a necessity for me as I have lots of interests and like to know a little bit about a lot of different things :)
I am liking your frame. Looks super strong. After redoing a 1974 travel trailer I was shocked how wimpy they are built! I cannot believe they can handle going down the road the way they are built. We loved redoing ours and next I hope to build a tiny house! Looking forward to watching more on this project.
Thanks Julie! I'll bet that was really cool project when you got it all done. Really knowing the ins and outs of it. And yes, it is crazy how well they do on the small frames. Mine might be towards the heavier side... but hopefully will have increased durability (fingers crossed :)
I got a 20 foot trailer frame made from 2 x 6 x 1/8 wall rectangular tubing with z purlins in the middle . Looked wimpy and light , but it is super stout
thanks Chris! This project has been on my mind for the better part of the last couple years.... I can't wait to put out the next 4-5 vids on it too!! :) thanks for checking it out Chris!!! Joe
Wood floors are awesome idea. Just use rino liner to seal the bottom, you can buy a gallon size that will do a whole truck bed. Apply it to the underside and wa la.
rino liner might just be the perfect coating for the bottom... I was just gonna seal then oil based paint... but now I am going to have to check into that:)
no no no. ive made that mistake already brother. it doesnt last and then your just out of that money. you can better use thin 26 gauge steel or aluminum. i know your thinking keeping road salts and grime out of the wood but but the main reason is to keep mice out of the house.
Great to have a handy father-n-law, also when using any type of wood for the bottom, coat the down side with roofing tar and let dry, last forever and is dirt cheap. Keep up the good work.
Hi Joe, I use to build a lot of stuff for my boats using plywood. I couldn't afford to spring for marine grade so I'd take exterior grade and coat it with a few coats of fiberglass resin. It worked like a charm. Can't wait to see the next video. It's really lookin' good.
Thanks LB! I'm in the same boat... will be sealing my plywood really well. But the current plan is to skin with aluminum and do spray foam or foam board so that nothing on the exterior has any wood to rot.... except for the floor that is ;)
Thanks! me too! getting it skinned and insulated with door/windows will be big victory point... then I'll probably take my time on the cabinets and other interior amenities :)
Thanks! you'll get to it for sure... whether with welding or even a bolt together trailer...lots of different options. and many trailer tops are actually mostly made of wood so you'll have lots of options to think about when the time comes :D
lol... yes, it's been about 2.5 weeks... was planning on having this up about a week ago and then my pump house died on me... had to order parts and replace the pressure tank, pump, get a water delivery, etc,.... before I could finish up the welding :)
Awesome Job!!! I really like the 45 degree on the lower back...it will help with backing up without hitting everything with the bumper. Looking forward to the next build
Finally...I'm commenting first. I've been looking for a metal fab camper build most people use heavy ply it will turn out good the weight will be OK...
...wondering if it might be prudent, to add some reinforcement iron...around those leaf spring hangers? Lots of repeating stresses at those places, as it endures road time. Weld extra angle iron in the channel in that area?
That's been something I've been considering... still not totally sure as the walls, once skinned will actually add to the total frame strength. I'm going to run my weight numbers again just to see and make sure :D
Thanks for checking it out Jason! I enjoy seeing the progress of the raw materials coming into something functional by the end of the build... hoping for this one to get to teh usable stage :)
This looks like a fun project to build and later to use. Have FUN! I have a request. When you get to the part where you join side to top, please show a lot of detail for sealing out mean old mister water. Rot your wood and rust your steel. I like to see this joint look trim and professional. I don't know how to achieve what I want here. I have seen these trailers pulled at high (>70) speed. That is a pretty strong wind trying to push water into any little gap that is there. Good luck with your project.
Thanks for checking it out! yes, I will do my best to show that part. its something that I want to make sure and do right so I can keep the water away for as long as possible. I still have a bit more research to do as Ive read several different philosphies on the trim aspect of teardrps and camp trailers... seems a good trim piece with adequate sealant applied and the right screws/rivets can make or break the tightness of the edge of the wall roof area
Awesome build! Thanks for the video! I've been researching trailers and tiny homes and RV building for a while. By now I've landed on using plywood, rigid insulation foam and a very thin lightweight sheet of fiberglass and epoxy to make it waterproof. That is how lightweight and sturdy boats are build (they use marine grade plywood but WBP glued plywood should work well enough for trailers). It's really lightweight because something like 4 to 6mm plywood with insulation core should be enough to produce a very strong and stiff box. It's lighter than metal or thick wood framing or even pure thicker fiberglass laminate. Basically SIP construction. This should be very cheap and lightweight. This is untested though.
Dejay Rezme thanks for checking it out! And your idea sounds good too! If you go and check out tnttt.com they have a group of people who build trailers out of foam and plywood so yoU might get some great ideas there😀👍
haha... not that talented. I just like to tinker with things and see what kinds of things I make. Lots of them don't go as planned...lol... but lets hope this one keeps going well :)
I am really inspired to build a trailer now by watching your videos. Very well done and meticulous and planned out job!! I retire in 13 months at age 49 and I am starting a list of supplies. Would it be possible for you to Make a detailed list of Steel dimension and thickness for walls, the sheeting you selected from ISS, Products that went into the trailer(amazon) and why you selected the item you did. I would pay 4.99 plus shipping for that list!! or if I buy a Shirt it would be included. Great job again.
I have thought about aluminum... but will go with wood just for ease of mounting mostly. I don't want to have to do rivets for the interior ply to the aluminum. But it is tempting as aluminum is so great with weather and long lasting. I will be doing aluminum for the outer skin though :)
couldn't be explained simpler than this, after your videos even I am considering to build up my own trailer with my fantastic 0 experience lol, as a noob I googled and learned a lot about how to build a travel trailer and the materials needed, but I couldn't get answers to few of my questions such as measurements, steal thickness, trailer weight, axle capability. If you could give some elaborated tips would be much appreciated. thank you for sharing these amazing videos.
I wanna build one of these caravan type trailers except I want mine to have the same off-road capability as the truck pulling it for them days when I wanna stealth camp in a remote location.
Now those are cool! I've seen some off road campers that are just straight up slick! slideouts, extra suspension, everythign alumimnum....super cool stuff :)
In all my research on campers and travel trailers, I have found options or standard features I dont have a need for. So I thought maybe I should build one. Voila you made a video of how to build one. Thanks, can't wait to see the next video. 😁
Thanks Robin! the leaf springs and axle are rated to 3500lbs... and I'm hoping to keep the trailer as light as I can... 2250 will be the goal weight. The walls are going to be aluminum and foam... with thin ply on the interior, and the cabinets and furniture will be built with that in mind as well... but reality says that I'm being optimistic...lol ;)
I think you are being realistic on the weights homestead. You know how much a stick of that tubing weighs so tally things as you go. I have done that and came out real close to final weights on stuff.
I have a 16 ft fiberglass RV that, if I remember correctly, was stated to have a 1500 lb dry weight. I weighed it when it was almost empty and it went 2200. You must know what you're doing but with all that metal, plywood, etc. it's going to be interesting if you can keep it down to 2250. My suspension is via a torsion bar axle.
homesteadonomics Love your build. Been following it for quite a while. Wondering what your final dry weight came in at? Also, what are your length and width dimensions? Maybe you posted it somewhere and I missed it. Thanks.
Cool project. If I were you I would skin the outside. Then add the insulation and wiring. Then skin the inside. Other wise you will have trouble running and hiding the wires. Just my two cents.
thanks Mark! that's pretty much the plan... get the outside skinned, then run wires/water lines... then spray foam or foam board... still debating and after that I will do the inside:)
Check out my NEW Homesteadonomics T-Shirt Designs here! www.bonfire.com/homesteadonomics/
I have a few suggestions for you. I'm retired now but I was a senior RV tech at one time. RV is just a slick way to sell cheap hardware and appliances at outrageous prices. For what it's worth, new technology has come a long way and one of the greatest improvements is in refrigeration. For the cost of an RV (ammonia absorption) fridge that performs poorly you can install a solid state or one of the new compressor refrigerators. Your cost savings can be put into better battery/inverter power. I've personally laid eyes on six RV's burned to the ground because of RV refrigerators that caught fire. Same is true for RV stoves. You can have a small (real) stove (24" apartment size) for half the cost of the trashy RV offerings. There is also a camping style 'on demand' water heater that runs on propane. It is far more efficient than either Suburban or Dometic RV tanked water heaters. Great video series. Your trailer looks great so far.
haha... I can imagine that :) Well, they definitely need to make it profitable so I can see not using quite the best components all the time. As for this build... I'm thinking super simple... I want to have power for led lights and charging ports for phones, etc,. But depending on weight I may not do a fridge or stove...was thinking of just a propane cook top stove that I can use indoor or out and just a cooler for food. I know that sounds crazy...considering building a trailer..haha.. but I want to only add the things that will be hands off and have little maintenance requirements. I’m even figuring a gravity water system as a way I forgoing a demand pump and water lines. Would still have a low tank but would only use the pump to charge the high tanks once we were parked then use gravity during the stay...just thoughts though😀
Great ideas. Thought... Those small "dorm room" refrigerators take less than 200 watts and weigh about the same as a large cooler. Easy to replace at any Walmart too. Cook top... Good move. The least used appliance in any RV is the oven. The camping LP stoves are low profile and could easily move to an outside kitchen. There are quick connect propane fittings available. You are way ahead of this game.
Awesome info
We use an instant pot and an air fryer to cook everything.
Check into the coolers that can plug in and be an actual freezer or refrigerator. They are a game changer. I also got a in demand shower head that is a hot water heater that just plugs in.
Super simple and so efficient.
Great job!
If you watch videos on Singapore homes, they are incredibly light, efficient, and actually highly luxurious. Asian countries, especially sKorea, Singapore, and Japan are decades ahead in compact luxury.
I know we all self judge. But i love it Sir. Its perfectly made. Steel frame your welds look perfect
This is what they should teach us in school instead of canning veggies. What a set of skills! Much respect. I'm envious.
As a retirement project I am currently building a 12ft retro travel trailer this video gave me the inspiration.
You are so talented, I’m amazed at how well/fast you learn then implement. Great job
thanks Jamie! It's definitely a learning curve for almost all my projects....lol... a lot of fudging and figuring to get it right ;) So the talent level isn't all that high... mostly the motivation to figure it out is though :D
Jamie Scott h
i loved your father. its nice to see son and father work together.
Can’t wait for part 2 this is going to be an exciting build
Thanks Michael! Me too! The quicker that I get to part 2... 3, 4, etc.. the quicker I'll take the girls camping :D
Give FULL credit to people who are supportive and generously share their knowledge, because that kind of generosity is a game changer. People like this Father-in-law, up level our capabilities, and self reliance. I have people in my life who hear the info I share with them and they, one in particular, immediately ego trips like they already knew the info...ego trippers suck !
Glad to see you gave some (?)/all (?) credit for his contribution.
You’re a really cool dude, I love that you put the thought into keeping this a multi-generational family project, it will be something you’ll be able to show off to your kids and grandkids for years to come.
It's wonderful that you have generous and helpful family members who offer skills and experience to your projects.
yes, I'm very blessed with a great set of friends and family... even on projects where I don't get any help I still often use them as a sounding board and idea check. My father in law is one of those guys who is like a subtle genius... just a wise man that seems to know a bit about everything and if its something new he can usually figure it out by deduction. I want to get a video with just him at some point:)
This will be a great project
thanks Justin! I'm super excited about it! It's gonna be a lot of work but oh so worth it by the end... assuming I don't make it too heavy to pull that is:)
Rarely do you see a video on how to build something that is as well done as your trailer build. While others hum haw around, you were direct, smooth and moved at a fast enough pace so as to not loose the viewer's interest and get it done. Great video.
I just got to say it. You motivate the hell out of me when it come to projects. When my knucklehead wife sees me watching videos like yours. she knows it's a new project coming around the corner. LOL
🤔😏😊
Thanks Antonio! the same think happens to me... I'll be looking at something and wife gives me the 'cross examination' face... and I just have to laugh :D
You started a good project to go camping with the family. 🏕👍🏻🦅
You'll never need to worry about cutting the wrong size, spin in circles or waste time trying to figure out what goes where... With ryan's detailed shed plans th-cam.com/users/postUgkxT9ExVpR-3A-9rpRqx8vzXKZ3BMMTg_KH , it makes building sheds a breeze - just like putting lego bricks together! You'll be able to create the kind of shed, your neighbors and other woodworkers will secretly envy (while mumbling nice job under their breath).
1. Industrial Metal Supply is AWESOME! Have several here in L.A.. If walking thru their store doesn't get you going, it's time to hand in your "Man Card".
2. You Father-in-Law is AWESOME! Whenever that dude shows up he makes a huge contribution to your project (Greenhouse).
I guess you hit the "Marriage jackpot"!
haha!!! yes
1. sooooo true!
2. Even more true!!! My in laws are just so awesome! I did win the lottery with both my wife and her family... but first my wife.... especially if she reads this....lol ;)
I'm so excited to watch the progress of this trailer. Watching you put this part together is inspiring!
I was inspired by a beautiful cactus mural that was perfectly put on a climbing wall in just a few hours in less than ideal conditions ;D
homesteadonomics that’s us, inspiration sharers! Haha! Our whole family does this in some way or another don’t they? 😉
Look at that workmanship ,nice!!
That looks really good!!!
thanks Keith!
You definitely are the master of all things !
haha... you're too kind :) more of a guy who knows enough to get myself in trouble of a lot of things ;D
Looking good so far, keep up the good work
thanks Fred! will do :)
Thank You for taking the time to make these Videos, I just wanted to share something with you.. I worked in a busy repair shop for a number of years and some times we would work on trailers the complain was they would be ill handling or blow out tires , the problem was always , that there were car tires on the trailer, My boss would order replacement TRAILER only tires and it would fix the problem , to this day I could not tell you the difference between the two or why this happens , but it just goes to show you how much engineering goes into a a tire..good luck on the build Pete M
It's been too long since I've seen you build something! I am so looking forward to seeing all the stages of build through to the end, a travel trailer no less! Exciting, but I have no doubt it will end up being fantastic! All of your work that I've seen is incredible. 👍
Thanks so much Teresa! I'm hoping it progresses smoothly with as few hiccups as possible...lol.. but it is a learning process as this is the first time I've done something like this :)
homesteadonomics, I understand hiccups, but that's part of the learning curve, right? I still have confidence you will design & build a real show piece like you always do. ✌
I'm currently studying industrial design and we're working on a food truck so this is SUPER helpful
Thank you so much for this vid!!!!!! Awesome trailer
Looking good Joe👍🏻
Thanks Wayne!!
Love how your project keeps the family close.
Coolio! Looking forward to the final product
thanks Andrew! me too!
"Industrial metal Supply", wow, this is heaven!
BTW, you can go to war with this trailer. Well done!
You build stuff the way things should be built I love it another great video can't wait till see the final product
Thanks Ed! I don't know if my quality is that good... but I do my best! and yes, I can't wait to see and (camp in) the finished trailer :)
Wow!!! You are amazing! You should be in the next Avengers movie!!! I cant wait to see your trailer when its done.
haha... now that's a compliment! I don't think I'd be able to compete with the rest of the cast though :D
homesteadonomics you really inspire me, I want to go out and start building stuff! My girlfriend and I enjoy your videos! Keep it up brother!
Cool. I can’t wait to learn from you on this project. Great video.
thanks for checking it out Raynola! :)
This is the one of the best channels on TH-cam. It is rekindling my love of building things.
That's not a trailer...... it's a tank! It's going to last forever! Great build.
thanks Bob! I just hope it doesn't pull like a tank :D
LOL at the moved back a bit. 2 or 3 inches is a bit. Great to see posted videos of this type of content, so Thanks.
This is way cool - thanks for sharing with us✔️
Thanks Julee! I appreciate you watching all of these little random builds of mine :D
Joe
Have to love the old times a wealth of knowledge
Really looking forward to seeing more of these!
Thanks Helmut! I've been looking forward to this build for a while and it's nice to see it taking shape... now just to get it to a campable stage :D
Glad to see your father-in-law helping out! Looks good
Thanks JB!
I said it before and I'll say it again, "there hain't nothing you can't build joe!!!" LOL! You are a professional my friend!!! Can't wait til part 2. 👍👍.Jay.
haha.. thanks Jay!
But I'll say it again....lol... there is plenty I can't build... I just pick the ones that I think I can build :D
homesteadonomics , LMBO!! Me too!!😁
HIS FUTHER R PROFESSIONAL.... HE IS JUST FOUND OLD IDIA.....
Hog Man
Great job !!!
This thing is going to be indestructible. FWIW, the vertical backend causes suction that will hit your fuel mileage, that's why the "teardrop" shape is ideal. If this is intended to be mostly a sleeper and the bed is going to be in the back, you won't really miss the headroom... or maybe even just make it more of a teardrop trailer and have a pop-up to an outdoor kitchen. Can't wait to see what you come up with next.
Zero Cool yes, It’s not the ideal shape...but hopefully it won’t be to much of a hit...a teardrop was what it originally was going to be until it got revamped. No much head room needed in back...but I may have some storage and a loft up there...not quite sure just yet though. Thanks for checking it out😀
I love watching your variety of projects.
They are interesting and youre very well thought out on your strategy, along the way and at each step.
Thanks Ash! I appreciate that. Variety is a necessity for me as I have lots of interests and like to know a little bit about a lot of different things :)
I am liking your frame. Looks super strong. After redoing a 1974 travel trailer I was shocked how wimpy they are built! I cannot believe they can handle going down the road the way they are built. We loved redoing ours and next I hope to build a tiny house! Looking forward to watching more on this project.
Thanks Julie! I'll bet that was really cool project when you got it all done. Really knowing the ins and outs of it. And yes, it is crazy how well they do on the small frames. Mine might be towards the heavier side... but hopefully will have increased durability (fingers crossed :)
I got a 20 foot trailer frame made from 2 x 6 x 1/8 wall rectangular tubing with z purlins in the middle . Looked wimpy and light , but it is super stout
As always great video.,! 👍
Thanks Evan! :)
Accompanying the process from Brazil! Anxious for the 2nd part!
Wow ! Can't wait for next video!
thanks Chris! This project has been on my mind for the better part of the last couple years.... I can't wait to put out the next 4-5 vids on it too!! :) thanks for checking it out Chris!!!
Joe
!!!wow I can't waiting 4 next video,
Cant wait to view the complete project
haha... me too!
Wood floors are awesome idea. Just use rino liner to seal the bottom, you can buy a gallon size that will do a whole truck bed. Apply it to the underside and wa la.
rino liner might just be the perfect coating for the bottom... I was just gonna seal then oil based paint... but now I am going to have to check into that:)
no no no. ive made that mistake already brother. it doesnt last and then your just out of that money. you can better use thin 26 gauge steel or aluminum. i know your thinking keeping road salts and grime out of the wood but but the main reason is to keep mice out of the house.
Mark Cobb no to paint or no to rhino liner??.
No to paint and Rino liner. Mice can and will chew through it. Aluminum or steel hurts their teeth.
I’m glad to see you making more videos.
Great to have a handy father-n-law, also when using any type of wood for the bottom, coat the down side with roofing tar and let dry, last forever and is dirt cheap. Keep up the good work.
Now there's an ignorant suggestion from a person that hasn't a clue.
@@Tay58382 whats your construction experience look like asshole?
That's awesome that you had your dad to help you out 👍
Another amazing project, looking great! Love the fact that this is a 'family project'. As always, thank you for posting!
Thanks Afonso!
Never underestimate old guys w/ skills!
amazing job man thanks for sharing! very impressed! would love to do something like this from scratch!
That is very impressive. Aside from the welding skill (which I know nothing about) the planning and craftsmanship is absolutely amazing.
So you scored an axle and you built a whole custom trailer around it...
👌🏻😅
Thanks for sharing the build!
Welding is no joke
I think is an excellent work Champ...CONGRATULATIONS🎉🎉🎉.
Awesome 😎 blessings
thanks Kimberly!
Wow. A big box store for metal!
Hi Joe,
I use to build a lot of stuff for my boats using plywood. I couldn't afford to spring for marine grade so I'd take exterior grade and coat it with a few coats of fiberglass resin. It worked like a charm. Can't wait to see the next video. It's really lookin' good.
Thanks LB! I'm in the same boat... will be sealing my plywood really well. But the current plan is to skin with aluminum and do spray foam or foam board so that nothing on the exterior has any wood to rot.... except for the floor that is ;)
Good looking frame, sir. Looking forward to the rest of the buildout.
Thanks! me too! getting it skinned and insulated with door/windows will be big victory point... then I'll probably take my time on the cabinets and other interior amenities :)
I got some tráiler plans but no welding skills. Nor a place to actually start a project like this. But one day watch lol. Great build HE.
Thanks! you'll get to it for sure... whether with welding or even a bolt together trailer...lots of different options. and many trailer tops are actually mostly made of wood so you'll have lots of options to think about when the time comes :D
For sure, Thanks Joe :)
Dad rulez! Great job!
Been wondering where you been. Cool project. Can't wait for tge next vid!
lol... yes, it's been about 2.5 weeks... was planning on having this up about a week ago and then my pump house died on me... had to order parts and replace the pressure tank, pump, get a water delivery, etc,.... before I could finish up the welding :)
now that's a proper build. good job mate
S M A S H another great build!
haha.. .THANKS!!! It's been rattling around in my head for a couple years now and so fun to actually be cranking it out :)
superbe !! bravo big kiss from Paris France
Great start Joe. Looking forward to the next installment.
thanks Jody! I'm looking really forward to having that one ready:D
Awesome Job!!! I really like the 45 degree on the lower back...it will help with backing up without hitting everything with the bumper. Looking forward to the next build
Thanks Benspens! I liked that aspect too... seen it on other trailers and I thought it was a good idea for practicality and looked cool too :)
"I was going to tow this with my Jetta TDI..."
Aaaaand I'm subscribed
Finally...I'm commenting first. I've been looking for a metal fab camper build most people use heavy ply it will turn out good the weight will be OK...
Great build so far and I can't wait for part 2. Thank you for sharing and as always Keep Building 👍
thanks Todd! I cant wait for the rest of the parts too... been playing mr mom the last couple of days so no more work has gotten done yet
Nice job Joe! The best!!
...wondering if it might be prudent, to add some reinforcement iron...around those leaf spring hangers? Lots of repeating stresses at those places, as it endures road time. Weld extra angle iron in the channel in that area?
That's been something I've been considering... still not totally sure as the walls, once skinned will actually add to the total frame strength. I'm going to run my weight numbers again just to see and make sure :D
I had a similar concern everything else looks great but would love to see those frame rails boxed in just my 2c
What an awesome father 🙏🙏
Thanks for sharing the project with us, I always love to watch these builds come together!
Thanks for checking it out Jason! I enjoy seeing the progress of the raw materials coming into something functional by the end of the build... hoping for this one to get to teh usable stage :)
That store is my heaven, wish we had one of those!
This looks like a fun project to build and later to use. Have FUN! I have a request. When you get to the part where you join side to top, please show a lot of detail for sealing out mean old mister water. Rot your wood and rust your steel. I like to see this joint look trim and professional. I don't know how to achieve what I want here. I have seen these trailers pulled at high (>70) speed. That is a pretty strong wind trying to push water into any little gap that is there. Good luck with your project.
Thanks for checking it out! yes, I will do my best to show that part. its something that I want to make sure and do right so I can keep the water away for as long as possible. I still have a bit more research to do as Ive read several different philosphies on the trim aspect of teardrps and camp trailers... seems a good trim piece with adequate sealant applied and the right screws/rivets can make or break the tightness of the edge of the wall roof area
Awesome build! Thanks for the video!
I've been researching trailers and tiny homes and RV building for a while. By now I've landed on using plywood, rigid insulation foam and a very thin lightweight sheet of fiberglass and epoxy to make it waterproof. That is how lightweight and sturdy boats are build (they use marine grade plywood but WBP glued plywood should work well enough for trailers).
It's really lightweight because something like 4 to 6mm plywood with insulation core should be enough to produce a very strong and stiff box. It's lighter than metal or thick wood framing or even pure thicker fiberglass laminate. Basically SIP construction.
This should be very cheap and lightweight. This is untested though.
Dejay Rezme thanks for checking it out! And your idea sounds good too! If you go and check out tnttt.com they have a group of people who build trailers out of foam and plywood so yoU might get some great ideas there😀👍
Thanks, I checked out that forum once but I didn't realize they also use plywood. Of course they do! :)
Cool trailer build. I was thinking of doing a off-road teardrop with my Landrover sankey trailer to match my 110.
How is this guy so talented
haha... not that talented. I just like to tinker with things and see what kinds of things I make. Lots of them don't go as planned...lol... but lets hope this one keeps going well :)
In it primary stage it looks it will turned to be a fabulous trailer..so best of luck for the rest of the project..
Thanks Sounak! I'm hoping it turns out well too! :D
I like the design
Zane Hope FZ6 Hundred thanks Zane!
I am really inspired to build a trailer now by watching your videos. Very well done and meticulous and planned out job!! I retire in 13 months at age 49 and I am starting a list of supplies. Would it be possible for you to Make a detailed list of Steel dimension and thickness for walls, the sheeting you selected from ISS, Products that went into the trailer(amazon) and why you selected the item you did. I would pay 4.99 plus shipping for that list!!
or if I buy a Shirt it would be included.
Great job again.
This build 👷 was so beautiful and strong WOW Smart guy 👦
Have you thought about aluminium studs instead of wood for the wall. Lighter in weight and not truly used in structural support.
I have thought about aluminum... but will go with wood just for ease of mounting mostly. I don't want to have to do rivets for the interior ply to the aluminum. But it is tempting as aluminum is so great with weather and long lasting. I will be doing aluminum for the outer skin though :)
homesteadonomics then you could go with metal studs and use sheet metal screws. Whatever you choose it will be awesome. Love your work.
This guy can do it all 👍amazing
It's amazing. You are such an inspiration for me.
thanks Eddy! I appreciate you watching :D
Joe
couldn't be explained simpler than this, after your videos even I am considering to build up my own trailer with my fantastic 0 experience lol, as a noob I googled and learned a lot about how to build a travel trailer and the materials needed, but I couldn't get answers to few of my questions such as measurements, steal thickness, trailer weight, axle capability. If you could give some elaborated tips would be much appreciated. thank you for sharing these amazing videos.
01:31 Sorry but my kids heard a$$hole....not axle. I told them listen more carefully 😂😂😂
lol... tell them my wife and mom would have my backside if I posted something like that....lol... but they did get me to re listen to it again ;D
I am very excited about this project !!!
thanks! I'm looking forward to how if comes out... and even more how it camps when we go on our first trip :)
I wanna build one of these caravan type trailers except I want mine to have the same off-road capability as the truck pulling it for them days when I wanna stealth camp in a remote location.
Now those are cool! I've seen some off road campers that are just straight up slick! slideouts, extra suspension, everythign alumimnum....super cool stuff :)
In all my research on campers and travel trailers, I have found options or standard features I dont have a need for. So I thought maybe I should build one. Voila you made a video of how to build one. Thanks, can't wait to see the next video. 😁
Nice job Joe! 👍👍👍
thanks Lebron!!
Nice day to worck. Each day! I Like the way that you USA People worck, always so profesional.
Looks awesome! How are the leaf springs with the extra weight? I don't know a lot about them but they look very small for what it's about to hold up.
Thanks Robin! the leaf springs and axle are rated to 3500lbs... and I'm hoping to keep the trailer as light as I can... 2250 will be the goal weight. The walls are going to be aluminum and foam... with thin ply on the interior, and the cabinets and furniture will be built with that in mind as well... but reality says that I'm being optimistic...lol ;)
Wow, I did not think a few sheets of metal could hold that much weight! You need to mount it on some scales while you work, haha
I think you are being realistic on the weights homestead. You know how much a stick of that tubing weighs so tally things as you go. I have done that and came out real close to final weights on stuff.
I have a 16 ft fiberglass RV that, if I remember correctly, was stated to have a 1500 lb dry weight. I weighed it when it was almost empty and it went 2200. You must know what you're doing but with all that metal, plywood, etc. it's going to be interesting if you can keep it down to 2250. My suspension is via a torsion bar axle.
homesteadonomics Love your build. Been following it for quite a while. Wondering what your final dry weight came in at? Also, what are your length and width dimensions? Maybe you posted it somewhere and I missed it. Thanks.
I have been wanting to build a enclosed utility trailer. I am going to follow along and see what ideas I could use to do it someday!
Okie Joe sounds good Joe! Hopefully some of this process will translate well for your project😀👍
Cool project. If I were you I would skin the outside. Then add the insulation and wiring. Then skin the inside. Other wise you will have trouble running and hiding the wires. Just my two cents.
thanks Mark! that's pretty much the plan... get the outside skinned, then run wires/water lines... then spray foam or foam board... still debating and after that I will do the inside:)
So hope our square drop camper build goes this well
This is going to be an amazing project! Looking forward to video series through completion!
Thanks John! I've been thinking about this project for quite a while... really fun to actually be getting it going :)