How To Setup a Stunt Bike Handbrake
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- #JBStunts #Kawasaki #Stuntbike
In this video I showcase the fitment of my new BeStunt 300mm rotor/bracket system, OEM Kawasaki calipers and CoreMoto braided brakelines.
Links to some of the parts that I have used in this setup are below.
bestunt.com/pr...
www.coremoto.com
kawasaki.com.au/
www.righteouss...
jbstunts.co/
dude should upload more videos about this complicated system love it
I like how you bungee strap everything to the shed ceiling 😂😂😂
Great video thanks man. Sweet setup you got there!
Is that brembo a special model just for left side ? The standard brembo for right side is different to what is in the video because banjo is always on the underside.
That is a good question and I have been asked this a bunch of times, I was lucky enough to purchase a few brembo's that were of an older style before they changed the banjo bolt location. I do have the newer models on some of my other bikes with the new banjo bolt location.
very interesting video, I really enjoyed it 👍👍
can you tell me the name of the song you used in the video ?
Ghosts by Fate
Ghosts by fate
cool bro! ill be doing a tutorial on a 636 2004 soon too :) from stock to stunt!
Thanks man!! Awesome work!!! I will definitely check out!!
Sick video man. Please help me out here.... I had a 16mm Magura HC1 with dual Nissin calipers off a 2019 and it felt great but was sooo touchy and sketchy on the street. So I tried going down to a 13mm HC1 with a single caliper and its very very spongy. Now, Nate from the Sic Shop is saying the proper config would be a 16mm with a single caliper or a 19/20mm for dual calipers... But you are more along my thinking having a 16mm on the duals...
So... if I only want to run a single 4-piston, should I try the Brembo RCS 14 or go back to a 16mm? Maybe the RCS 16 so I have the adjustable ratio as well?
Hey man sorry the late reply, I honestly stay away from the Magura setups as I have heard a lot of riders have the same issue. I have always stayed with brembo 16/18 or 19/20. Personally I found the 19/20 ran well with one quad piston caliper with a more tense feel and the 16/18 with two quad piston calipers (with good brake fluid) had more feedback and stayed very responsive on the longer sessions. Some other stunt riders might not agree but that is what I found worked for me. I hope this helps.
if anyone is kind enough to answer: do you need another reservoir for the handbrakes? or does it connect to the rear brake reservoir?
Yes you need another reservoir for handbrake, the regular foot brake has a reservoir and a line for its caliper, so if you're adding another caliper and another line going up to the handlebar, you need a reservoir alongside it
I have a 2020 RSP CONDOR 150cc need right hand break n. Sprocket rear sprocket I believe 43 or 53
I just bought my first stunt bike with a similar brake set up from ssmoto, but my tire doesnt spin as freely almost as if the brakes are holding it down a bit, what could it be? thanks for the help
Does it matter which handbrake caliper you start bleeding with first? Like at 6:40 you start with the one closer to the master cylinder then finish with the caliper farthest from the master cylinder.
Luv the music the video was so clean, keep it up I need to know will I find the complete kit on Amazon and what would be the brand.....Oh I have a Yamaha R1 YZF IAM working on
Can you install it on the zx25rr or not?
Does anyone know the best hand brake setup for my 1993 cbr600 f2 looking for budget setup any help would be great ful.
What length brake line please help
I run between a 75/80inch (Handbrake) line for most of my bikes it gives me enough room to run it cleanly through the bikes without it getting pinched or damaged. @CoreMoto have a great selection of custom lines.
whattup!!! Subbed ya
Bro can this be done on a atv
Do you have a link to that bracket?
What calipers did you use for the this set up? In the rear
I have a