I bought a 50c battery with my Promotto yesterday so I could take it out for it's maiden run and have determined the 50C just isn't enough to make it work in "wheelie mode." I have two 7200, 120C Zeee batteries now and hope to try it out soon.....damn rain! At any rate, the running I could do was awesome as soon I figured out the turning, which takes the right amount of throttle and steering input. Shoot, even my wife was impressed:-) Love the vids Earl, keep up the good work.
Thanks for this Video Brother! I'm still waiting on my Losi Moto but watching all the videos out there. Totally enjoy your experience and insight with these RC Vehicles. Total Fun!😎👍
Getting it dialed in every run 👍 just thinking about the steering, the reason it turns left to go right is because it needs to lay that bike down, so it drives the wheels out from under it to do that. Same on a full size bike. I'd be curious to see what the front wheel is doing once its in the turn cause it must turn back the other way. Lots of smart electronics going on for sure.
Trigger plays a big part to steering on this bike just like a real street bike you can hold the steering left bikes heading right and with the throttle you can make it turn tighter or bigger and the whole time the gyro is fighting to stand it upright 😱crazy feeling when running this rc for sure 👍
Looking good! I switched mine over to my DX5 Rugged, works better. I did go into mode 3 by accident and launched it off into a huge wheely and scratched up the rear fender and a little nick on the rear helmet. I use this one as my runner and get another for display.
Good test, I agree side bars all the way up is way to go. Looks like your getting the breaks down or close. Would like to see a test from full Throttle to hitting the break from a straight run. Did I here the clutch slip some, I would see if you can loosen clutch some just to see effects. Your close to race ready more than I have seen others bikes. What keeps the front forces springing back to normal. Is it like a servo saver or just has a spring . Thanks for great video.
Adjusting brake trim while driving is bad idea because U could have lot drag on pads .. put travel to max spin the wheel by hand and adjust trim as much as U can with out it having friction. At end of day a stronger brake servo is only real way make front brake much better
I love the bmw wagon its so clean ! I like earl keeps it 💯 when he doesnt know, you learn with him keep up the fire builds love those lim's and Powerhobby wheel colors. Dope dike too.
Awesome video! Thanks for all the videos. Any way to message you have a few questions and you seem to know what you are doing. I just picked one up. Did you mess with the lean angle trim at all?
Few years ago Du-bro introduced a plane, tricycle gear nose wheel front brake. This bikes front brake is almost an exact copy of that setup. Couldn't be 'exact' or HH would be owned by Du-bro. (Not that THAT would be a bad thing, seeing as what HH did to other businesses 🤷♂️.)
Hey Earl! Liking the mods on the Pro Moto so much better on the turns overall on all surfaces! That guy was a Classic out there in the field your getting that cycle really dialed in Bud!😉👍📹💯✔️👋👋👋👋👋
you should make Protections for elbow in Print 3D TPU , is it possible to make Stoppy (stop totaly the front wheel) ? is it possible to run whith gyro off with experience ?
My man Earl out here practicing, you appear really comfortable with it now. I know i was trolling in past videos, however, you won me over, great channel. I hope you didn't give up on the speed runs, I'm buying my first Arrma Felony next month. That battery, are you using the large Spectrum charger? The charger it came with is terrible.
So much better with the training wheels up . I'd personally take em off completely 🤘🤘🤘 they look so toy grade with them down tbh , hopefully they take notes and produce a better version next run 🤘🤘🤘
@@earlmoorhead5555 yeah man i used to live on the old rd I moved to Santa Monica a few years ago just got my promoto too been seen your videos keep up the good work hopefully we could hang out one day man and run the bikes
Eman helping everyone get the setups just right. Thanks for showing all your hard work so the rest of us can learn.
I bought a 50c battery with my Promotto yesterday so I could take it out for it's maiden run and have determined the 50C just isn't enough to make it work in "wheelie mode." I have two 7200, 120C Zeee batteries now and hope to try it out soon.....damn rain! At any rate, the running I could do was awesome as soon I figured out the turning, which takes the right amount of throttle and steering input. Shoot, even my wife was impressed:-) Love the vids Earl, keep up the good work.
Thanks for this Video Brother! I'm still waiting on my Losi Moto but watching all the videos out there. Totally enjoy your experience and insight with these RC Vehicles. Total Fun!😎👍
Now that’s mint …didn’t fall over much 👍👍👍smooth…
Thanks!
Appreciate the support my guy 💯🙏
🍻 🤸🏼 watching mark Santa Maria right now. Such a riot.
Nice run ! Them adjustments worked out great 👍
Great video! Some of my upgrade parts came in today which is a good sign of things to come!
Yes seems HH is pushing to get stuff out hopefully quality not effected to bad doing it 💯
Getting it dialed in every run 👍 just thinking about the steering, the reason it turns left to go right is because it needs to lay that bike down, so it drives the wheels out from under it to do that. Same on a full size bike. I'd be curious to see what the front wheel is doing once its in the turn cause it must turn back the other way. Lots of smart electronics going on for sure.
Trigger plays a big part to steering on this bike just like a real street bike you can hold the steering left bikes heading right and with the throttle you can make it turn tighter or bigger and the whole time the gyro is fighting to stand it upright 😱crazy feeling when running this rc for sure 👍
“Like Lightning McQueen!” 😂😂👌🏼
Lmao right he made me laugh to
Looking good! I switched mine over to my DX5 Rugged, works better. I did go into mode 3 by accident and launched it off into a huge wheely and scratched up the rear fender and a little nick on the rear helmet. I use this one as my runner and get another for display.
Good test, I agree side bars all the way up is way to go. Looks like your getting the breaks down or close. Would like to see a test from full Throttle to hitting the break from a straight run. Did I here the clutch slip some, I would see if you can loosen clutch some just to see effects. Your close to race ready more than I have seen others bikes. What keeps the front forces springing back to normal. Is it like a servo saver or just has a spring . Thanks for great video.
Just a spring on the brake
Adjusting brake trim while driving is bad idea because U could have lot drag on pads .. put travel to max spin the wheel by hand and adjust trim as much as U can with out it having friction. At end of day a stronger brake servo is only real way make front brake much better
@roblapouple7552 or adjusting servo voltage to existing servo 🧐
@@earlmoorhead5555 guess it depends how long u want it to last if its not a hv servo
@roblapouple7552 most are not stock normally I push my stock one with voltage to speed up response
Good runs cool mods… done to the bike 🚲 great job thumbs up 👍
Thanks 👍
Earl Moorhead tank you for all you for this hobby tank you all Earl 👍😎 cool job on bike cool video
I love the bmw wagon its so clean ! I like earl keeps it 💯 when he doesnt know, you learn with him keep up the fire builds love those lim's and Powerhobby wheel colors.
Dope dike too.
The fun factor builds !!!
Awesome video! Thanks for all the videos. Any way to message you have a few questions and you seem to know what you are doing. I just picked one up. Did you mess with the lean angle trim at all?
Can't wait to see the difference in the dirt, looks like you might be able to get some better input from the trigger...
Earl did you move it to your house are we going to get to see your new workbench and RC storage looking forward to it
Still working on it
Great control.
Few years ago Du-bro introduced a plane, tricycle gear nose wheel front brake. This bikes front brake is almost an exact copy of that setup. Couldn't be 'exact' or HH would be owned by Du-bro. (Not that THAT would be a bad thing, seeing as what HH did to other businesses 🤷♂️.)
je kif toutes vos vidéo elles sont super merci
Thanks
Hey Earl! Liking the mods on the Pro Moto so much better on the turns overall on all surfaces! That guy was a Classic out there in the field your getting that cycle really dialed in Bud!😉👍📹💯✔️👋👋👋👋👋
you should make Protections for elbow in Print 3D TPU , is it possible to make Stoppy (stop totaly the front wheel) ? is it possible to run whith gyro off with experience ?
To heavy I think
@@earlmoorhead5555 for stoppy?
Yes weights down low so hard to get the front to hold
Boots wear right down though
Mine looks like he's had a double foot amputation.
You missed some really cool 😎😎 wheelie slow motion early in the grass but still love the video 😅🎉🎉🎉😊
Next time!
My man Earl out here practicing, you appear really comfortable with it now. I know i was trolling in past videos, however, you won me over, great channel. I hope you didn't give up on the speed runs, I'm buying my first Arrma Felony next month. That battery, are you using the large Spectrum charger? The charger it came with is terrible.
Yes bigger charger
Losi gives you in the box shorter bump stops for the lean bars
Yea my riders boots been destroyed .. I think boots are glued to leg at factory on wrong angle toes pointing out a lot 😡
So much better with the training wheels up . I'd personally take em off completely 🤘🤘🤘 they look so toy grade with them down tbh , hopefully they take notes and produce a better version next run 🤘🤘🤘
Just curious Earl, can you change the shock fluid on that bike?
Yes
Hey man are you in newhall near Santa Clarita? Where is the bmx park located ?
Been in many videos but a quick Bmx track it pops up
@@earlmoorhead5555 yeah man i used to live on the old rd I moved to Santa Monica a few years ago just got my promoto too been seen your videos keep up the good work hopefully we could hang out one day man and run the bikes
If you slow down to gyro you will steer quicket
I got 2 of them red and blue
Super glue and baking soda will do the trick on plastic.SANDSHARK RACING 512.
Awesome ❤
Hello Earl will that bike run on 3s thank you.
You’ll have to add an external BEC to run the gyro motor 50amp castle BEC
thank you@@earlmoorhead5555
Can’t wait to people 6s castle these lol
I wish we could comment with a pic
😎💯💯💯