Jon this is amazing! Thank you for doing this. Can't wait to see how you like it. And if all goes well. I am surprising the wife with this in her TRD PRO over the weekend. She will have no idea till Monday morning.
Hey Jon, I got one of these units with the black trim myself and did some research and learned that Dupli -Color BUN0090, Universal Black Metallic, is a great match to the existing trim color on both the TRD Pro and TRD Off Road packages. Looking forward to your video series on this unit.
I wish you could have continued the video to show the full assembly and installation of the T8/T9 head unit. Trying to decide if I should make the purchase or not and while I am sure I could figure most of it out, it is helpful and reassuring to have a video showing the entire process and all
I’m going to use your advice in this video to remove the center unit because I need to replace one of the middle vents above the stereo. Do those vents just slide in and out easily once the head unit is removed? Or are there more tricks to getting the vents in and out of that entire unit? Thanks for any help you can provide.
I really appreciate the video! Was able to replace my screen with your help. I would love to know where you got your new head unit from though?? I looked for one just like that and had no luck finding one.
random question, is it possible to replace the infotainment unit in a 2012 with a 2010-2012 NON NAV unit? I like that unit MUCH BETTER with its amber lighting and old school simplicity, i hate screens in cars
Once you have the head unit removed, how difficult is it to replace the touch screen glass unit? I cracked mine and am considering purchasing a replacement. Thanks!
Jon, I got a stupid, but somewhat important question. Isn’t the front channel factory wiring in the 5th Gen 4Runner’s wired in parallel. The factory speakers along with most aftermarket speakers are 4 ohm. You wire a couple 4 ohm speakers in parallel, you are going to get a 2 ohm load. Don’t most aftermarket speakers require nothing less than a 4 ohm load? That would overheat or ruin the head unit right? I’m definitely missing something here. Can you explain?
Very easy and fool proof. Hope this was helpful for somebody out there!!
Check out our DIY Audio System: th-cam.com/video/Yb-omOGkwlA/w-d-xo.html
Good vid but you should have showed replacing the ac vents
Short and to the point! Good stuff Jon
I figured I drop this today so there wasn’t 3 videos tomorrow. Thanks!
@@TRDJon I'll be watching! Keep it up
I appreciate it!!
New 2016 4runner Owner here. I appreciate your videos, putting my Sub in tonight. Thanks for all your work!
Thank you so much!! I appreciate the support!
Congratulations!
Jon, thank you for producing great content!
Glad you like them!
I always bop my head to that outro music. Great choice.
Hahaha thanks!!!
TRD Jon, too easy! Thanks! About to install the Dasaita in my daughter’s 4Runner, wish us luck!
Just finished installing the Dasaita in the 2014 4Runner and everything works perfect. Very happy with the purchase and thanks much to TRD Jon!
"Don't yank it out" great advice lol
Great vid Jon
Clean your windshield bro!
Bahaha I know. It’s pollen season 🤦🏻♂️🤦🏻♂️
Good job showing the removal of the wires on the back. That is something I get a ton of questions about.
Thanks man! I appreciate it
Can't wait to see it all put together
Will be out tonight!!
Jon this is amazing! Thank you for doing this. Can't wait to see how you like it. And if all goes well. I am surprising the wife with this in her TRD PRO over the weekend. She will have no idea till Monday morning.
Hahaha yes!!!!
Thanks! This helped so much
Glad it helped!
How do you remove the air vents?
Hey Jon, I got one of these units with the black trim myself and did some research and learned that Dupli -Color BUN0090, Universal Black Metallic, is a great match to the existing trim color on both the TRD Pro and TRD Off Road packages. Looking forward to your video series on this unit.
Just screen shot this comment. Thank you so much!!
Cant wait for the next video!!!!!
Fan feature Friday!??
No, you getting the new touchscreen put in. I hope it works as good as it looks. Can't wait to see what you think of it.
Hahah I knew what you meant. We will have two videos tomorrow 👍🏼 and I’ll have a basic review on the weekend
I wish you could have continued the video to show the full assembly and installation of the T8/T9 head unit. Trying to decide if I should make the purchase or not and while I am sure I could figure most of it out, it is helpful and reassuring to have a video showing the entire process and all
I have one. Just search my channel for it. I did this one short so I could add it to a toyota basics playlist.
I’m going to use your advice in this video to remove the center unit because I need to replace one of the middle vents above the stereo. Do those vents just slide in and out easily once the head unit is removed? Or are there more tricks to getting the vents in and out of that entire unit? Thanks for any help you can provide.
❤❤❤Great job New generation for me
Simple
I really appreciate the video! Was able to replace my screen with your help. I would love to know where you got your new head unit from though?? I looked for one just like that and had no luck finding one.
Under the factory clock, is that left open or is there a trim piece that goes there?
It comes off or the original bezel. It’s just pops off
random question, is it possible to replace the infotainment unit in a 2012 with a 2010-2012 NON NAV unit? I like that unit MUCH BETTER with its amber lighting and old school simplicity, i hate screens in cars
Once you have the head unit removed, how difficult is it to replace the touch screen glass unit? I cracked mine and am considering purchasing a replacement. Thanks!
No idea.
Probably very
How do you untab the harness?
Jon, I got a stupid, but somewhat important question. Isn’t the front channel factory wiring in the 5th Gen 4Runner’s wired in parallel. The factory speakers along with most aftermarket speakers are 4 ohm. You wire a couple 4 ohm speakers in parallel, you are going to get a 2 ohm load.
Don’t most aftermarket speakers require nothing less than a 4 ohm load? That would overheat or ruin the head unit right?
I’m definitely missing something here. Can you explain?
That is outta my realm of knowledge. I'm sorry.
Thank you!
Thanks!
Thank you
You're welcome
Where did you get the new head unit from?
cartrimhome.com
Awesome video, loved how it was purely good content and no fluff! Thank you! Can't wait to get my own head unit like that
Gotta just get strait to the point on videos like these.
How was the 9" touchscreen?
Just ok
Is it direct pluggin or do u need extra adapter for the back connectors 🤔
Direct plug and play 👍🏼👍🏼👍🏼
525 and only a 1 year warranty?
what headunit is this?
My stock entune on a 2018
Or the new one is T88 an android one. Check the last video for the unboxing.
Wow your quick
Gotta get it out there
I don't know how the heck y'all just pop it out like it's nothing
I’m struggling to remove mine on a 21, I guess I need to use the pry tool?
"Reach around."
Face palmed my self when editing
Damn vents are kicking my ass
Make sure you take the tiny screws out first
@@TRDJon thanks for the super quick reply! I was also not getting the right clips. Found them and it's super easy.
Me too
@@trihomelife there's 4 clips you pop with a small flat head or similar tool and they pop out
@@c0011j thanks John. I was making it harder than it needed to be
how do you remove the vents from the stock dash?