#484

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 ก.ย. 2020
  • How to diagnose a common piece of audio home theater equipment. Basic steps of troubleshooting my Pioneer VSX-D710S Dolby Digital receiver. Yes it's a bit long. No way to rush through something like this in 5 minutes.
    Manual found at malualslib.com.
    "Kick Shock" Kevin MacLeod (incompetech.com)
    Licensed under Creative Commons: By Attribution 3.0
    creativecommons.org/licenses/b...
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 65

  • @victoryfirst2878
    @victoryfirst2878 3 ปีที่แล้ว

    This is got to be the best channel on TH-cam. Straight to the point instructions that are known and accurate. Thanks

  • @mack1915
    @mack1915 4 หลายเดือนก่อน +1

    Hi, Thanks, I have this exact model from new. RHS speaker also intermittent but comes alive at increased volume. I suspect your vid might now save me some time!

    • @zerolabs
      @zerolabs  3 หลายเดือนก่อน +1

      Best of luck!

  • @LONNIE1949
    @LONNIE1949 2 ปีที่แล้ว +1

    Great job! Very informative video.

  • @menchon101
    @menchon101 ปีที่แล้ว

    nice to meet you ... from Spain.

  • @seancsnm
    @seancsnm 3 ปีที่แล้ว +1

    Good stuff! May be good to re-iterate the importance of safety around 120 V but it was a great troubleshooting guide.

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว

      Ha ha! Okay. It's important to be safe around 120 V. Better? ;-)

  • @aerotro
    @aerotro 3 ปีที่แล้ว

    Nice Job Z in fact video came out good even with mic failure made the best out of what was left :D

  • @lourosantana2228
    @lourosantana2228 2 ปีที่แล้ว

    Good, very good. Thanks here from Brasil.

  • @EstebanSS
    @EstebanSS 3 ปีที่แล้ว

    Excelente!

  • @r1ch4rdw4gn3r
    @r1ch4rdw4gn3r 3 ปีที่แล้ว

    Zero! Always good to see your updates. Can’t count the things I’ve fixed, maintained and upgraded during the past ~6 months. ;)
    Say, have you spoken to Gary Hendershot lately? Any idea how is he doing? Would be great to see you both on a stream again...

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว +1

      I have touched base with Gary! He and Teri are well. Lives now in the TN mountains. Enjoying retirement and their grandchildren.

    • @r1ch4rdw4gn3r
      @r1ch4rdw4gn3r 3 ปีที่แล้ว

      Zero Labs lovely, that’s good to hear. Thanks for the update :)

  • @UltimateRoadWarrior9
    @UltimateRoadWarrior9 3 ปีที่แล้ว

    Great tutorial. I have the VSX D812. Very similar. No problems with mine yet but nice to watch you working. Would've been nice to see the resoldering tho. Did you just add solder, suck out the old solder, or add flux and resolder?

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว

      Just added flux core solder. Soldering is an art deserving of its own video but that's a topic pretty well covered already.

  • @James_Bowie
    @James_Bowie 3 ปีที่แล้ว

    Hi, love your channel.
    A side question: I guess you eventually got resolution to that power line RFI issue you posted about some 3 years ago. An update on that would be welcome. (I couldn't easily find one with the search function.)

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว +1

      Yes I did. Turned out to be an in-home cellular repeater owned by my neighbor that was still powered but not being used for many years that had gone completely haywire. Not only caused RF interference but also put an end to neighbor relations when they refused to allow me to locate the source when asked politely. Had to have the power company temporarily disconnect power to their home to prove it was coming from their home. Had they not fixed the problem, under federal law, and by enforcement action through the FCC, I could have, AND WOULD HAVE had their power disconnected permanently until they did.

  • @Calpe1704
    @Calpe1704 ปีที่แล้ว

    Hi, ive picked up a VSX-708RDS, only problem is that it has distorted sound R/H channel. Any suggestions please

  • @smerffn
    @smerffn ปีที่แล้ว

    I have this exact surround sound system. When I plug into my PlayStation 4 via optical it works but only on FL and FR, the surround sound speakers have no sound. I went into test mode and it transmits sound to all speakers so I don't know how to make it surround sound. Hopefully you can answer or point me towards a trouble shooting forum. Please and thank you

  • @Viralvideos-content
    @Viralvideos-content 3 ปีที่แล้ว

    My Pioneer vsx 823 powers on then shuts off a few seconds later. nothing is connected to it. Have tried Reset but doesnt stay on long enough to complete steps. Any suggestions...Thanks

  • @TimeNowAndThen
    @TimeNowAndThen 3 หลายเดือนก่อน

    how do i make work the active sub play? I get no sound what ever i do, but the sub works i just cant get no signal. Do i need the original remote for surround setting? I tried sub preout and sub out nothing works help :(

  • @a1piaute
    @a1piaute 3 ปีที่แล้ว

    Do you know how to reset a pioneer VSX-04 it has power off that comes on after powering up then it shuts off

  • @Daniel32396
    @Daniel32396 2 ปีที่แล้ว

    I'm in the process of troubleshooting a VSX-84TXS. Most if not all of the speaker outputs are intermittent, but they'll wake up if I turn the volume up nearly all the way.
    The service manual I could find seems to only focus on the HDMI side of things. So hopefully I can figure things out by looking at other models. Still need to check the headphone jack to see if that works.

    • @Daniel32396
      @Daniel32396 2 ปีที่แล้ว +1

      Well, I had to jump through a lot of hoops in the end. Removing one of the screws from the back panel disconnects the grounding to the DC side of things, which lead to a fault, and the receiver then refusing to turn on. Never imagined taking the back panel off would cause an issue, but it did, and it took me a long time to figure out that that was the problem.
      Anyway, after that, turns out it was just the relay switches being dirty that was giving me the intermittent problem. Easy fix.

    • @zerolabs
      @zerolabs  2 ปีที่แล้ว

      @@Daniel32396 Classic.

  • @craftymulligar
    @craftymulligar ปีที่แล้ว +1

    What now haven't heard from you.

  • @GaryMcKinnonUFO
    @GaryMcKinnonUFO ปีที่แล้ว

    Hello good sir, long time no see, are you still experimenting ?

  • @ranganabandara1
    @ranganabandara1 2 ปีที่แล้ว

    sir i have a Pioneer VSX-434 AV Receiver. It's showing "MUTING" what should I do for this error.

  • @arlindonduvani1033
    @arlindonduvani1033 ปีที่แล้ว

    Hello Father I'm Arlindo from Mozambique I need your help with my pioneer vsx _ax5i _s when I tern on is shouting down the power going to protect mode please help

  • @kfatbob1
    @kfatbob1 3 ปีที่แล้ว +1

    Your still my wizard Zero. Thanks for sharing. How’s the rocket heater been running? 👌👍

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว +1

      Need a rebuild before winter. That will be another video.

    • @free-energycoil
      @free-energycoil 3 ปีที่แล้ว

      @@zerolabs hello, can I suggest you a generator technology with an efficiency of ~ 190%?

  • @jrcapostol2138
    @jrcapostol2138 2 ปีที่แล้ว

    Hello. How did you remove the ribbon wire? Did you just pull it or was there a clip? Mine i similar and I wonder if I just need to pull it. I'm afraid I may break the ribbon wire.

    • @zerolabs
      @zerolabs  2 ปีที่แล้ว

      The Mylar ribbons are very tough. They pull straight out, but usually need a good tug.

  • @menchon101
    @menchon101 ปีที่แล้ว

    hello, a great video, well I have one pioneer 710, and I need to do a factory reset, I cant find the way. Please, can you help me?, its important, thank you.

  • @sunnyjay137
    @sunnyjay137 2 ปีที่แล้ว

    pioneer VSX-1020 pqls flashing Had no problems over past 11 years until the past couple of weeks. We now have a repeatedly shuts down and the blinking PQLS red light and will not power on. But when I power unplug and re-plug there is click in sound which show it was ON but only show blinking PQLS red light nothing else. I tryed all speaker and HDMI unplug but same as it is.

  • @Honeydo666-gaming
    @Honeydo666-gaming 2 ปีที่แล้ว

    How do I connect my turntable to this

  • @ruperstinsky30
    @ruperstinsky30 3 ปีที่แล้ว

    Hi, my receiver vsx d710s was keapt for a year, now when I turn it on you don't hear the R channel and also when I use rhe auxiliary the sound si Heard un the channel L despiste le el the knob to cd, tape, lc dvd or radio, please, what is the problem ?? Thanks

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว

      Too many things it could be. Requires troubleshooting.

  • @Adirondacks4me
    @Adirondacks4me 3 ปีที่แล้ว +1

    Cute on the morse code while pressing on the relay with the bad solder joint......lol....... What movie was that?

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว

      Extra points for decoding...

    • @Adirondacks4me
      @Adirondacks4me 3 ปีที่แล้ว

      @@zerolabs All I heard was CQ....so what movie were you and the wife watching there at the end....?

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว +1

      Italian Job of course. An all time favorite.

  • @travisgulley2652
    @travisgulley2652 3 ปีที่แล้ว

    If the 120 volt ac power outlets on the back of a av receiver get shorted out would the av receiver itself get damaged

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว

      It would definitely blow the internal fuse but other than that I think not.

  • @suataydemir9144
    @suataydemir9144 3 ปีที่แล้ว

    Hello, I sprayed oil-free contact spray inside the function keys and then the buttons got stuck. What can I do to fix it? Thanks.pioneer sa-540

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว +1

      I might try flushing it with 91% isopropyl alcohol.

    • @suataydemir9144
      @suataydemir9144 3 ปีที่แล้ว

      @@zerolabs thank you

  • @hone148
    @hone148 3 ปีที่แล้ว

    My Pioneer Elite SC-05 lost the subwoofer signal, when I jiggle the cable it gains signal, is it the output connector??

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว

      You're probably close. The output connectors have stiff wires soldered to the pc board behind it. Probably a bad solder joint at the pc board.

    • @hone148
      @hone148 3 ปีที่แล้ว +1

      @@zerolabs thank you sir for your response

  • @Tangyungan
    @Tangyungan 3 ปีที่แล้ว

    I have a Pioneer vsx-d702s. Where can I have the schematic for trouble shutting? Who can help me? Thanks.

    • @dominiqueevrard9721
      @dominiqueevrard9721 2 ปีที่แล้ว

      Bonjour j'ai un problème avec mon home cinéma pionner il affiche power off puis il s'éteint que faire merci

  • @ruperstinsky30
    @ruperstinsky30 3 ปีที่แล้ว

    Receiver vsx d710s can be reset manually?? How?

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว

      Nope. Must have a remote. That's one thing I really do not like about these.

  • @ianthompson3520
    @ianthompson3520 3 ปีที่แล้ว

    With a name like zero fossil fuel can you do an article on home heating The future of heat exchanges If possible

  • @izzzzzz6
    @izzzzzz6 7 หลายเดือนก่อน

    That wireless mic. lol

    • @zerolabs
      @zerolabs  6 หลายเดือนก่อน

      Yeah, even with full diversity receiver, I still get some multi-path cancellation from time to time, with all the reflections being inside a Faraday cage.

  • @robertochavez3528
    @robertochavez3528 3 ปีที่แล้ว

    Hola buenas noches tengo un Pioneer no se hoye prende todo pero no se escucha q ago

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว

      No abla espanole.

  • @allenlorenz
    @allenlorenz 3 ปีที่แล้ว

    Z ( giving the middle finger ) as you pointing device on the schematic !! ouch.

    • @zerolabs
      @zerolabs  3 ปีที่แล้ว

      Ha ha ha! I didn't even realize it. I swear!

  • @ianthompson3520
    @ianthompson3520 2 ปีที่แล้ว

    How come we haven’t seen many videos zero fossil fuel

    • @zerolabs
      @zerolabs  2 ปีที่แล้ว +2

      Life happened. :-\

  • @verishare
    @verishare 2 ปีที่แล้ว

    At least it wasn't a capacitor hi hi