Yes the video is real-time speed. To get the engraving depth you are limited by the lase wattage well before you are limited by speed of the machine. So, if you use a larger laser (500W, 650W) you could increase your speed and maintain the same engraving depth.
I've got a couple of diode lasers, aiming for a CO2 next, but probably just a 60-80 watt to start. I'm going to try some experiments and see what I can do- I'm sure it'll take a lot longer, I've got a 10 and a 20 so I'll start small and see what I can do. I've gotten quite good with them over the last couple of Years, I think I can accomplish something like this. Heeeey, at least my cuts don't go too much slower! But I think Diodes are suppose to be quite good for cutting, which is most of what I do ;)
I have a 150 watt machine for nearly 2 years now, and you can explain me how in the effin F , are you working on 80% without producing any smoke AT ALL, do please explain me this magic trick, what sort of wood is that ?
I think the video doesn't show the smoke very well. There is a little bit but our top vacuum picks that up. The wood used is locally sourced 3/8" maple. It does seem to laser very clean.
thank you for this marvelous machine , i would like to ask if there is a special 3D laser machine in arabesque art design if it is available can you send a video report for demonstration ??
Thanks for the demo. I have two Epilog Fusions and pondering adding a Kern to the shop. 3D is a lot of fun and rewarding. Are .stl files used in your workstream? We used to use water for cleaning wood but warping was high risk. Surprised you recommend this post processing method. Also, doesn’t Kern have auto focus? What lens are you using for the demo? Kern or 3rd party? Thanks!
Hello! Any file type that you can get into CorelDRAW or Illustrator will work great for 3D. We use our post processor to export into our software as a .PDF file. Water works, but you need to use a minimal amount, otherwise you will get warping. There are other ways to clean them out that do not include water. Kern does have auto-focus. For engraving we generally use a 2.5" FL lens in our own lens assembly. I hope this answer your questions!
@@Kernlasersystems Thank you very much! That is exactly what I have been looking for. Your machines are amazing. I hope to step up to one of your small units one day. It is so great to see them made in the US. Hope you guys are staying warm!
Pricing depends on the few factors such as laser wattage, table size, and add-ons installed. Please visit our website to request a quote of a machine specific to your needs: kernlasers.com/request-a-quote/
Hello. I am Vietnamese! i really like your bipmap grayscale conversion, can you share so i can learn more? in my country few people share because they all want to hide and very few people know about this programming, I hope you share with me, learning from you I feel very happy, thank you
CorelDraw accepts almost any file type to be processed in their software. The most common ones would be .pdf, .dxf, .jpeg, .ai, .bmp, etc. If you wanted to upload the file directly into KCAM, then a pdf would be best!
Sorry for the late reply. If you have the right software and system, you would be able to do this with a low-wattage laser tube 30w to 50w would work fine, but you would have to go really slow to produce the depth. our lowest wattage is 100w (traveling about 10 to 15 inches per second, at 80% power.)
Oh no! why when I use BMP image file to sculpt with Laser, the text is almost flat on the top and almost flat on the bottom, almost like it's just like a cnc milling cutter, I'm using a 1310 Co2 laser of Baisheng China, I Bought in Vietnam through one of their agents, it's not like the ones in the West. Wish your model will have agents in Vietnam as well as Southeast Asia
Hi Santosh, We would be happy to provide you with some quotes and pricing. Please fill out the request a quote form and a salesman will reach out to you today! kernlasers.com/request-a-quote/
The level of detail here is incredible. What an awesome (additional) thing for me to dream of!
Yes the video is real-time speed. To get the engraving depth you are limited by the lase wattage well before you are limited by speed of the machine. So, if you use a larger laser (500W, 650W) you could increase your speed and maintain the same engraving depth.
Good job
I've got a couple of diode lasers, aiming for a CO2 next, but probably just a 60-80 watt to start. I'm going to try some experiments and see what I can do- I'm sure it'll take a lot longer, I've got a 10 and a 20 so I'll start small and see what I can do. I've gotten quite good with them over the last couple of Years, I think I can accomplish something like this. Heeeey, at least my cuts don't go too much slower! But I think Diodes are suppose to be quite good for cutting, which is most of what I do ;)
¡El nivel de detalle es fabuloso!
I have a 150 watt machine for nearly 2 years now, and you can explain me how in the effin F , are you working on 80% without producing any smoke AT ALL, do please explain me this magic trick, what sort of wood is that ?
I think the video doesn't show the smoke very well. There is a little bit but our top vacuum picks that up. The wood used is locally sourced 3/8" maple. It does seem to laser very clean.
I like it, what is the best software will work with the kern laser? Please
Thanks
CorelDRAW is a great graphics design software, but you can use anything that will export a PDF or DXF file.
thank you for this marvelous machine , i would like to ask if there is a special 3D laser machine in arabesque art design if it is available can you send a video report for demonstration ??
The laser system will engrave any style of artwork you input. Artwork can be purchased from www.gantryco.com or designed custom.
Здравствуйте! подскажите как правильно создать УП. Если можно подробное видео как создавать 3D на СО2.
Thanks for the demo. I have two Epilog Fusions and pondering adding a Kern to the shop. 3D is a lot of fun and rewarding. Are .stl files used in your workstream? We used to use water for cleaning wood but warping was high risk. Surprised you recommend this post processing method. Also, doesn’t Kern have auto focus? What lens are you using for the demo? Kern or 3rd party? Thanks!
Hello! Any file type that you can get into CorelDRAW or Illustrator will work great for 3D. We use our post processor to export into our software as a .PDF file. Water works, but you need to use a minimal amount, otherwise you will get warping. There are other ways to clean them out that do not include water. Kern does have auto-focus. For engraving we generally use a 2.5" FL lens in our own lens assembly. I hope this answer your questions!
Wow, the laser engraving on wood is mind-blowing! 😍 How did you achieve such precision? Cheers from Singapore!
Thank you! Kern's KCAM software along with our laser power control allows us to achieve great detail when engraving!
Can you do this in metal and make a 2 part mould for injection moulding?
This process does not work for metals. It works great for softer materials like foam, wood and some platics.
Fiber laser might be able to do this. This is a Co2 laser that only cuts into certain surfaces.
How many times would you have to run the file to engrave that on a marble shower tile?
Unfortunately, the stone will be too hard for this type of engraving.
Can you share where you get your gray scale images. Thanks, Greg
Any bitmap image can be used just convert to greyscale...
@@philbromley4565 Thanks
Can you share where the image was obtained used in the example?
@@nopriors Hi Greg, we got a couple of the files shown in the video from www.gantryco.com/
@@Kernlasersystems Thank you very much! That is exactly what I have been looking for. Your machines are amazing. I hope to step up to one of your small units one day. It is so great to see them made in the US. Hope you guys are staying warm!
Hi! Greetings from Mexico City
Hello!
Can I buy the KCAM software program and will it work with my Xtool p2 laser engraver?
KCAM is only compatible with Kern's laser machines.
Wow !!!
Hi , May i know how much is the OPF100-OPTIFLEX..?
Pricing depends on the few factors such as laser wattage, table size, and add-ons installed. Please visit our website to request a quote of a machine specific to your needs: kernlasers.com/request-a-quote/
I am living in Germany and how can I buy this machine? what is procedure?
Hello, please contact us at info@kernlasers.com and we can put you in touch with a local partner.
Hello. I am Vietnamese! i really like your bipmap grayscale conversion, can you share so i can learn more? in my country few people share because they all want to hide and very few people know about this programming, I hope you share with me, learning from you I feel very happy, thank you
Hello, we buy the artwork from www.gantryco.com. I hope this helps!
Can you use Light Burn software with your machine?
Yes, we have tested Light Burn and the .DXF export feature will load the file directly into our KCAM software!
We have also found that the PDF print feature also works.
I would love to get good at designing my own file for 3D engravings.
Show me
how can i like adjtst tht laser nozel like you do with acrylic
If you mean using a wider nozzle, it is simply just purchasing this part.
What file type does the grayscale image need to be when i send it to corell draw?
CorelDraw accepts almost any file type to be processed in their software. The most common ones would be .pdf, .dxf, .jpeg, .ai, .bmp, etc. If you wanted to upload the file directly into KCAM, then a pdf would be best!
what kind of wood did you use for this?
We use maple wood.
Could you do thiscwith a 50 w machine?
Sorry for the late reply. If you have the right software and system, you would be able to do this with a low-wattage laser tube 30w to 50w would work fine, but you would have to go really slow to produce the depth. our lowest wattage is 100w (traveling about 10 to 15 inches per second, at 80% power.)
Olá, gostaria de adquirir
how do we buy this machine in India?
If you fill out this request a quote form, kernlasers.com/request-a-quote/ a salesman will reach out and be happy to help you! Thank you!
I have some amazing ideas but that laser cutter is probably very very expensive
They have one for every budget, check the K40`s? I started there....
Oh no! why when I use BMP image file to sculpt with Laser, the text is almost flat on the top and almost flat on the bottom, almost like it's just like a cnc milling cutter, I'm using a 1310 Co2 laser of Baisheng China, I Bought in Vietnam through one of their agents, it's not like the ones in the West. Wish your model will have agents in Vietnam as well as Southeast Asia
We do have some distributors in Asia. Here Is a link to a map of all our distributors across the world. kernlasers.com/where-to-buy/
I would like to buy this machine, could you please guide me and quote the rates.
Hi Santosh, We would be happy to provide you with some quotes and pricing. Please fill out the request a quote form and a salesman will reach out to you today! kernlasers.com/request-a-quote/
150 watts? Not helpful to me