@4:03 - Sorry, wish you would have researched this more since it's quite interesting. The lasers in these machines HAVE to be pulsed, using a method called Q-switching to obtain high peak-power pulses that can couple their energy into otherwise transparent material. These pulses, incidentally, are in the megawatt range and over a very short time span, usually a number of nano seconds. These lasers use several IR diode lasers to "pump" a Nd:YAG laser crystal, which is frequency doubled from 1024nm to 532nm (green) in order to be able to pass into the glass target object. Interestingly, this laser technique is used in tattoo removal machines to penetrate skin and oblate sub dermal ink . CO2 lasers can do a continuous etch on glass because glass is opaque to the near IR long wavelength of CO2 lasers, and therefore they can only etch the surface. Also, because glass is opaque to CO2, more energy is transferred directly to the glass, rather than passing through it, which allows the CO2 laser to remain in CW operation (continuous wave, i.e. not Q-switched). So, the operators of these bubblegram machines do not have the option to do a "continuous blast". However, using fewer dots/bubblegram will shorten processing time and wear on the laser components. So in that sense you're right about fewer dots being more economical.
Thanks! Really glad you commented as this is the kind of information I was trying to find but just couldn't, there was nothing much out there. I can't edit the video, youtube killed annotations, but will pin your awesome details so people can get that extra bit of info.
I CANNOT THANK YOU ENOUGH FOR EXPLAINING THIS. My grandparents had one of these with a pair of hands in prayer and a cross, both in the middle of the glass cube and 3D (it was even on a fancy multicolored rotating pedestal) and it always baffled me how it was made. Now after who knows how many years I know how!! I feel so enlightened!!!
We had one that was of Jesus on the cross. It was given to us along with a rotating, color-changing base. The effect led us to call it, rather blasphemously, "disco Jesus".
Just had one made of my mom and dad in a heart shaped glass. It cost over $250 to make but is gorgeous and will last a lifetime. Thanks for the info on how they're made.
Back in 1998 I worked for a company in Wisconsin that had one of these YAG laser machines, and I had the job of operating it. It was absolutely fascinating to watch that machine work! I can also attest to the fact that optically pure crystal is super crazy Fragile. The slightest touch to each other or a semi hard surface and they would ship. Keeping inventory was fun for sure.
Used to watch your videos a lot when I first got into 3D printing around 2015, then didn't see your videos for a while. I wanted to know how the 3D images were in objects and found this video leading me back to your channel after a couple years.
Thank you! This video is just complex enough to help us understand how it’s done, still simple enough for the average person to understand it, and even suggests that there’s a more complex process involved for those who want (or don’t want) to dig deeper.
I've been in the industrial laser biz for many years. The sub-surface marking it pretty fun to watch, for sure and a nice effect. Once upon a time it was really special and you paid big bucks but now they sell the crystals at gas stations for $5.00. Good video.
Being in NYC, I see a lot of these being sold in the streets with various items etched inside. But lo' & behold! there are some that are made acrylic (most of these are), but the image inside was etched onto a thin sheet of acrylic and then put into a mold where liquid acrylic is poured in and allowed to harden. This creates a "cube" (or any other shape) with the image inside. Most of the times it is hard to detect but if you turn it to the side, the image flattens and almost disappears, signifying that it is a 2D image and not a 3D image in the "cube." Some times, there are flaws where you can see the acrylic paper seams about suspended in acrylic before it hardened.
I used to do this for a living in Las Vegas, the best lasers were the German "Vitro" lasers, not the ones from China. The laser uses a multi-faceted head to engrave hundreds of thousands of "points" inside the glass, to do that the image is converted or created as a cloud of dots. The laser is actually multiple beams that focus at a specific point to create a fracture, meaning that you can even stick your hand in the beam but the laser does not burn until you are at the exact XYZ of the beam that you have told it to burn at. One day a customer came in as part of a convention and fell in love with it -- turns out he was a big timer with Walmart and before you know it the back room where I worked was filled to the ceiling with boxes of glass for me to make displays -- displays for every Wal-Mart in the country. From what I understand they are still pressing "print" on the display files I created to this very day, even though I haven't been at that company for nearly a decade. So if you walk into a big box store and see one of these it might actually be one of my files from 2006 :) Oh and they do last forever, if you can avoid an accident that breaks the glass there is absolutely no fading whatsoever. I still have quite a few decade-plus works that look as good as the day they were made.
Love the video, I saw this the US around 25 years ago and loved it. I then started a business with no idea what I was getting into but loved the learning experience and traveled the world sleeping in airports to find the equipment to do this. I now have a laser machine in my garage that I’m wanting to get running again and try find some better low cost modern 3D face scanning technology as this was a real drawback in until 15 years ago when I gave it away. That said I love this kind of technology and have moved onto CNC router and have just ordered a 5 axis water jet cutter.
Years ago I did a job for Polaroid ,were we laser cut acrylic polarizers for an Arab sheik jet . When you rotated the polarizer it was a variable light filter ,we focused the laser and scribed the polarizer to say Polaroid . It lite up the word when it went opaque .
Thank you for your video🙏 I was wondering the same question and I confirm this is the only video that I found with real explanation.thank you for your informations.
Thank you for making this. I had one made in Germany in 2006. It didn't cost that much and I still cherish it. Always have been curious about how they did it.
I wish I could remember. I'm in the military. They had a both in the post exchange in Grafenwöhr or Vilseck. I am a year away from retiring. I've always had a dream to do that for a retirement job.
Apparently that is an alternate technology used for specific plastics but I couldn't find ANY info on it so decided to omit it instead of spreading false information. If you dig anything up let me know!
really? ha, here was me thinking I'd guessed entirely wrong :P But yeah, never saw or knew anything, just a guess I'd made many years ago, and until now had seen nothing about how it's actually done.
+Makers Muse - Thanks for the video. I've had one of these items since my 1999 trip to Russia, where the technology was pioneered. It was remarkably inexpensive for the time (turns out using US cash in Russia at the time got you a bit more for your money). They were very proud of the precision with which they were able to make these little pieces of art and the quality of crystal they were able to obtain for it. Exports to the US that I found were extremely expensive and of lower quality (though I have no idea why that was the case, other than possibly saving money on the lasers, possibly). It was almost a decade before I started to see any version of these show up in the US and it's always been a conversation piece. Nice to see that my explanation of their creation was pretty accurate - thanks, again!
I've seen a few of these in the past, and I figured it was lasers, but it's still beautiful to look at them with these 3D etchings inside solid glass/crystal/plastic.
I have one of those that is like 15 years old. They 3d scanned my dad and me and then custom made it while we looked on. It blew my mind of several layers. It was the first ever 3d scan I saw, the bubblegram itself was amazing technology and then they used a lego plate as a bed to put the glas on because apparently lego plates have ridiculous tolerances
I always thought that there were multiple lazers, and that they would intersect in one spot to make that spot essentially have the power of 2 or 3 lazers on it. Would've never thought this is how they do it, great video!
I used to think this too! I wonder if we just both thought of that when we saw the objects, or if that was a misexplanation that was in the wild at some point, or if there are actually machines that do it that way.
Would like to see an update with how they implement the HD quality and how they are able to do multiple do do multiple images now giving it a live action effect pretty cool I always was curious about this myself think this is a going to be a good anniversary gift idea
Very interesting. Its amazing how the focal point is so precise that no melting or etching takes place as its entering the glass crystal. When I was going through school at ITT tech we learned a little about lasers and optoelectronics. We made holograms on pieces of clear glass like window glass. It was a pretty simple basic procedure using a beam splitter and a helium-neon (HeNe) laser in a sandbox. Beam was split to provide your object beam and the incidence beam. The best thing we used for an object to make a hologram out of was an old television tube. The detail in the holographic image was awesome. The one thing that is really odd and sometimes hard to explain is, if you break that glass every single piece of broken glass will have the entire image on it. This is because the image is a frequency of light imbeded into the glass each piece has that frequency of light in it containing the entire image, might be very small on some pieces but its all there! 👍 I've worked with the older type (rear projection) television sets as a technician repairing them. Some TVs made by Philips/Magnavox used an optical coupling fluid between the CRT and lens. This was ethylene glycol the same chemical used for automobile coolant except it didn't have any color dye added. This fluid is considered optically transparent. It has a particular diffraction index. This index is taken into consideration for how the lenses are cut or made. The refraction index is that effect you get when you put a pole into a swimming pool and it looks like the pole is bent where it enters the water. Different fluids have more or less of that effect than other fliuds. They used that phenomenon to obtain the focus on the mirror/screen. They also used it as a cooling fluid for the CRTs to transfer heat away, being those little picture tubes (CRTs) were driven pretty hard in order to get decent brightness of the picture. Optoelectronics is an amazing technology. Just FYI, the term "laser" is an acronym for; Light Amplification by Stimulated Electron Radiation. 💯👍
I've always wondered about this. I never would have guessed that the images are composed of tiny fractures. My guess was that the image was somehow constructed out of a flexible fiberglass fabric and then had molten glass poured over it into a rectangular mold, but couldn't figure out how they would avoid air bubbles. Also, I for one think that "bubblegram" is a fantastic name.
Yes!!! You need less power than you might think, so do some small tests first - and a solid image will work better than greyscale. Dithering is the best way to get gradients :)
Angus: Have you tried focusing a normal CO2 laser below the surface? Maybe with dithering or such? I know getting a full '3d' look would be tricky without the software and machine, but being able to do 2-3 layers could be fun to try on some 10mm thick glass.
I'm actually very curious why we can't just use a CO2 or diode laser to sub-surface laser engrave dithered point clouds if you are controlling the Z-height of the lens to focus it.
I work in a machine shop where I run the laser engraver to engrave text on aluminum parts. We have clear plastic fixtures to hold parts. Once I had the laser focal point inside the plate and marked without a part and got a bubbling effect inside the plastic like in theses objects by mistake.(having a focal point a little above or below the surface can leave a cleaner marking the part)
It's interesting. Some 20+ years ago I saw one of these in operation in Las Vegas. The guy realized I was into the tech side and he explained it all pretty much like you did. He also mentioned there was another technology at the time that used 2 lasers at 90degree from each other and where they collided it put a bubble. He said that he had done a lot of research before buying though and the other system was more money and much harder to calibrate (both lasers at a needle point size must hit each other exactly) and that they would get out of alignment very easy which would either end up with no image or one that looks fuzzy. That other company is probably long gone now.
I was always intrigued by that by that technology since I bought a glass block with London iconic and historical buildings for my grandpa as a present for only 20 pounds, which seemed cheap but totally good quality.
I have always wondered how that worked ever since I saw one of those things it's bothered me for years I'm glad someone finally made a video about this
There's a few low cost kits, but I've been cautious on using them because they have zero safety considerations. Touch a hotend you'll get a burn, shine a laser in your eye you're blind for life... Don't really want to promote that kind of thing to be honest.
A nozzle burn I can take. Blindness definitely not. I've read a little about the Muse - the laser device not the Aussie ;) - but that's not what you and I might call "affordable". I was hoping someone made a less-expensive unit with all the proper safety interlocks. Maybe someday.
Just for the record: Fablab genova made an 80W CO2 open source laser cutter implementing all safety interlocks like commercial machines usually have. The total cost was around 2000€ for a 1250x780mm work area. They did a great job. You can see the machine in this video th-cam.com/video/_z17imYLvGM/w-d-xo.html
I only looked this up about 2 weeks ago! My previous boss had one on her desk for years, and I picked it up while visiting recently, and decided I really needed to know how it was done so I could find out if I could do them myself :p
thx for video i have question i just start to 3d internal engraving bussines but it is hard to make 3d its lookin ok but taking a lot time do u know same software convert 2d to 3d lss or mbf format thx again
I've been wondering about this for years! I've seen the really see videos that barely give an explanation where I'd still be thinking "but how?" So thank you for giving a good explanation
Hey Man.. need help... I am trying to engrave a QR code in Acrylic with Laser.... Th problem is its not scanning....means it ends up unscannable.... can you enlighten... will it work or never work! Would really appreciate your response in this!
In the 1990s I worked for a company that bought a color laser printer. At the time, that printer cost $20,000. Crazy how prices for tech changes so quickly.
4:10 it also means that you can use a lower power (therefore cheaper) laser as with quick a succession of on off cycles you can pump more power into a lower class laser without damaging it and still have a great final product.
I worked for a company in Mexico that makes those engraved cristals, and the models used are very similar to the ones used for 3d printing. So if you have some models that you want on cristal, you can look for a local shop that can engrave them for you.
I remember when we found this anomaly playing with Lucite in the lab back in the mid 90's. This first time I brought home a block with my wife photo in it. Talk about brownie points that day.
Should I be able to mount a laser to my prusa? Because we’re not burning things there wouldn’t be any smoke either. Any idea on where to buy a clear cristal block?
It works better with glass. You can get clear glass paper weights , and with the right engraving program and a very good digitizer you can get 3D images.
Thanks Angus nice video if any software program that you recomend to use on this 3d laser machine i jutst got me a cryslove b2 machine and willing to get my hands on the machine and star doing glass cube thanks in advance keep doing great videos
@4:03 - Sorry, wish you would have researched this more since it's quite interesting. The lasers in these machines HAVE to be pulsed, using a method called Q-switching to obtain high peak-power pulses that can couple their energy into otherwise transparent material. These pulses, incidentally, are in the megawatt range and over a very short time span, usually a number of nano seconds. These lasers use several IR diode lasers to "pump" a Nd:YAG laser crystal, which is frequency doubled from 1024nm to 532nm (green) in order to be able to pass into the glass target object. Interestingly, this laser technique is used in tattoo removal machines to penetrate skin and oblate sub dermal ink . CO2 lasers can do a continuous etch on glass because glass is opaque to the near IR long wavelength of CO2 lasers, and therefore they can only etch the surface. Also, because glass is opaque to CO2, more energy is transferred directly to the glass, rather than passing through it, which allows the CO2 laser to remain in CW operation (continuous wave, i.e. not Q-switched). So, the operators of these bubblegram machines do not have the option to do a "continuous blast". However, using fewer dots/bubblegram will shorten processing time and wear on the laser components. So in that sense you're right about fewer dots being more economical.
Thanks! Really glad you commented as this is the kind of information I was trying to find but just couldn't, there was nothing much out there. I can't edit the video, youtube killed annotations, but will pin your awesome details so people can get that extra bit of info.
Maker's Muse TH-cam killed annotation?
Yes, as a creator we can no longer 'annotate' videos like add notes or corrections. It's frustrating.
Maker's Muse well that certainly saves you from having to make the effort. Perhaps this channel should be named thom1218?
+cabletie69 - Are you trolling? I don't see what's wrong with pinning the comment for those who are interested...
I CANNOT THANK YOU ENOUGH FOR EXPLAINING THIS. My grandparents had one of these with a pair of hands in prayer and a cross, both in the middle of the glass cube and 3D (it was even on a fancy multicolored rotating pedestal) and it always baffled me how it was made. Now after who knows how many years I know how!! I feel so enlightened!!!
Welcome! I was exactly the same, I had no idea and no one I talked to did either lol
Yup, I shared this with my grandpa to let him know. He's a woodworker and I'm sure he'll find it interesting 😊
We had one that was of Jesus on the cross. It was given to us along with a rotating, color-changing base. The effect led us to call it, rather blasphemously, "disco Jesus".
Whoa that's really cool! Thanks for sharing!
Thanks man!
Hi buddy
What!! You're everywhere lol
some of us get around
Hi in 2020 congrats on 9.3 mil subs
Just had one made of my mom and dad in a heart shaped glass. It cost over $250 to make but is gorgeous and will last a lifetime. Thanks for the info on how they're made.
where did you get it made?
Back in 1998 I worked for a company in Wisconsin that had one of these YAG laser machines, and I had the job of operating it. It was absolutely fascinating to watch that machine work! I can also attest to the fact that optically pure crystal is super crazy Fragile. The slightest touch to each other or a semi hard surface and they would ship. Keeping inventory was fun for sure.
I can imagine! Mine already has a few small scuffs :(
Thanks!
Used to watch your videos a lot when I first got into 3D printing around 2015, then didn't see your videos for a while. I wanted to know how the 3D images were in objects and found this video leading me back to your channel after a couple years.
Thank you! This video is just complex enough to help us understand how it’s done, still simple enough for the average person to understand it, and even suggests that there’s a more complex process involved for those who want (or don’t want) to dig deeper.
I've been in the industrial laser biz for many years. The sub-surface marking it pretty fun to watch, for sure and a nice effect. Once upon a time it was really special and you paid big bucks but now they sell the crystals at gas stations for $5.00. Good video.
I'm always pondering how stuff is made/created, never quite satisfied with just seeing it.
Thanks for another superb explanation Angus.
It was fun to research and get to the bottom of it.
Im allways happy to watch your videos
Being in NYC, I see a lot of these being sold in the streets with various items etched inside.
But lo' & behold! there are some that are made acrylic (most of these are), but the image inside was etched onto a thin sheet of acrylic and then put into a mold where liquid acrylic is poured in and allowed to harden. This creates a "cube" (or any other shape) with the image inside. Most of the times it is hard to detect but if you turn it to the side, the image flattens and almost disappears, signifying that it is a 2D image and not a 3D image in the "cube." Some times, there are flaws where you can see the acrylic paper seams about suspended in acrylic before it hardened.
thanks for sharing this. My son wanted to know how our travel souvenir was made. We ended up watching this video together. 🙏🏻
I did try to search on this thechnology but couldn't found any high quality video but now I do Thank you
Thank you so much for explaining this in depth! Well done sir! 👌
I used to do this for a living in Las Vegas, the best lasers were the German "Vitro" lasers, not the ones from China. The laser uses a multi-faceted head to engrave hundreds of thousands of "points" inside the glass, to do that the image is converted or created as a cloud of dots. The laser is actually multiple beams that focus at a specific point to create a fracture, meaning that you can even stick your hand in the beam but the laser does not burn until you are at the exact XYZ of the beam that you have told it to burn at. One day a customer came in as part of a convention and fell in love with it -- turns out he was a big timer with Walmart and before you know it the back room where I worked was filled to the ceiling with boxes of glass for me to make displays -- displays for every Wal-Mart in the country. From what I understand they are still pressing "print" on the display files I created to this very day, even though I haven't been at that company for nearly a decade. So if you walk into a big box store and see one of these it might actually be one of my files from 2006 :) Oh and they do last forever, if you can avoid an accident that breaks the glass there is absolutely no fading whatsoever. I still have quite a few decade-plus works that look as good as the day they were made.
Love the video, I saw this the US around 25 years ago and loved it. I then started a business with no idea what I was getting into but loved the learning experience and traveled the world sleeping in airports to find the equipment to do this.
I now have a laser machine in my garage that I’m wanting to get running again and try find some better low cost modern 3D face scanning technology as this was a real drawback in until 15 years ago when I gave it away.
That said I love this kind of technology and have moved onto CNC router and have just ordered a 5 axis water jet cutter.
hi,May I ask how your project is running now, I think we can open a section of the
Years ago I did a job for Polaroid ,were we laser cut acrylic polarizers for an Arab sheik jet . When you rotated the polarizer it was a variable light filter ,we focused the laser and scribed the polarizer to say Polaroid . It lite up the word when it went opaque .
Thank you for your video🙏 I was wondering the same question and I confirm this is the only video that I found with real explanation.thank you for your informations.
I have one of these from many years ago. Always been a cool piece that my mother keeps in addition to our pictures. Neat little things.
Thank you for making this. I had one made in Germany in 2006. It didn't cost that much and I still cherish it. Always have been curious about how they did it.
Lance Jones , what company made it ?
I wish I could remember. I'm in the military. They had a both in the post exchange in Grafenwöhr or
Vilseck. I am a year away from retiring. I've always had a dream to do that for a retirement job.
Thank you! I was getting so sick of these "how laser engraving works" videos on youtube. You actually explained how it worked!
I always figured it was lasers, but my assumption was multiple beams converging on a point, I had always underestimated what a difference focus makes
Apparently that is an alternate technology used for specific plastics but I couldn't find ANY info on it so decided to omit it instead of spreading false information. If you dig anything up let me know!
really? ha, here was me thinking I'd guessed entirely wrong :P
But yeah, never saw or knew anything, just a guess I'd made many years ago, and until now had seen nothing about how it's actually done.
Yup, I'd always assumed it was two converging beams. This is just as cool though.
Thank you! I had been wondering about it for a while!! 😊
+Makers Muse - Thanks for the video. I've had one of these items since my 1999 trip to Russia, where the technology was pioneered. It was remarkably inexpensive for the time (turns out using US cash in Russia at the time got you a bit more for your money). They were very proud of the precision with which they were able to make these little pieces of art and the quality of crystal they were able to obtain for it. Exports to the US that I found were extremely expensive and of lower quality (though I have no idea why that was the case, other than possibly saving money on the lasers, possibly). It was almost a decade before I started to see any version of these show up in the US and it's always been a conversation piece. Nice to see that my explanation of their creation was pretty accurate - thanks, again!
I've seen a few of these in the past, and I figured it was lasers, but it's still beautiful to look at them with these 3D etchings inside solid glass/crystal/plastic.
Thank you, for demystifying a curiosity of mine, for years!
I have one of those that is like 15 years old.
They 3d scanned my dad and me and then custom made it while we looked on.
It blew my mind of several layers. It was the first ever 3d scan I saw, the bubblegram itself was amazing technology and then they used a lego plate as a bed to put the glas on because apparently lego plates have ridiculous tolerances
Amazingly interesting and useful! Thank you!
Uh sir your production quality is on point.
I always thought that there were multiple lazers, and that they would intersect in one spot to make that spot essentially have the power of 2 or 3 lazers on it. Would've never thought this is how they do it, great video!
I used to think this too! I wonder if we just both thought of that when we saw the objects, or if that was a misexplanation that was in the wild at some point, or if there are actually machines that do it that way.
Oh thank God. I needed this.
You just solved the biggest mysteri in my life. Thanks
3:39 if you scan material for points of refraction then aplay mask of shift focus you can engrave on any surface and in into object
Thank you so much for explaining it!!
Thanks for explaining.
Love it same here looking around how is made Thanks homeboy
Would like to see an update with how they implement the HD quality and how they are able to do multiple do do multiple images now giving it a live action effect pretty cool I always was curious about this myself think this is a going to be a good anniversary gift idea
Thank you for posting this video
Very interesting. Its amazing how the focal point is so precise that no melting or etching takes place as its entering the glass crystal. When I was going through school at ITT tech we learned a little about lasers and optoelectronics. We made holograms on pieces of clear glass like window glass. It was a pretty simple basic procedure using a beam splitter and a helium-neon (HeNe) laser in a sandbox. Beam was split to provide your object beam and the incidence beam. The best thing we used for an object to make a hologram out of was an old television tube. The detail in the holographic image was awesome. The one thing that is really odd and sometimes hard to explain is, if you break that glass every single piece of broken glass will have the entire image on it. This is because the image is a frequency of light imbeded into the glass each piece has that frequency of light in it containing the entire image, might be very small on some pieces but its all there! 👍
I've worked with the older type (rear projection) television sets as a technician repairing them. Some TVs made by Philips/Magnavox used an optical coupling fluid between the CRT and lens. This was ethylene glycol the same chemical used for automobile coolant except it didn't have any color dye added. This fluid is considered optically transparent. It has a particular diffraction index. This index is taken into consideration for how the lenses are cut or made. The refraction index is that effect you get when you put a pole into a swimming pool and it looks like the pole is bent where it enters the water. Different fluids have more or less of that effect than other fliuds. They used that phenomenon to obtain the focus on the mirror/screen. They also used it as a cooling fluid for the CRTs to transfer heat away, being those little picture tubes (CRTs) were driven pretty hard in order to get decent brightness of the picture.
Optoelectronics is an amazing technology. Just FYI, the term "laser" is an acronym for; Light Amplification by Stimulated Electron Radiation. 💯👍
Great video ! the internal engraving .
Cool, thanks. Realy intresting.
I've always wondered about this. I never would have guessed that the images are composed of tiny fractures. My guess was that the image was somehow constructed out of a flexible fiberglass fabric and then had molten glass poured over it into a rectangular mold, but couldn't figure out how they would avoid air bubbles. Also, I for one think that "bubblegram" is a fantastic name.
So, you're saying I should engrave glass in my Muse?
Yes!!! You need less power than you might think, so do some small tests first - and a solid image will work better than greyscale. Dithering is the best way to get gradients :)
Angus: Have you tried focusing a normal CO2 laser below the surface? Maybe with dithering or such?
I know getting a full '3d' look would be tricky without the software and machine, but being able to do 2-3 layers could be fun to try on some 10mm thick glass.
You need very little power ;) I can do it with a 2.5 watt diode laser.
I'm actually very curious why we can't just use a CO2 or diode laser to sub-surface laser engrave dithered point clouds if you are controlling the Z-height of the lens to focus it.
glass is opaque to a CO2 laser.
I work in a machine shop where I run the laser engraver to engrave text on aluminum parts. We have clear plastic fixtures to hold parts. Once I had the laser focal point inside the plate and marked without a part and got a bubbling effect inside the plastic like in theses objects by mistake.(having a focal point a little above or below the surface can leave a cleaner marking the part)
It's interesting. Some 20+ years ago I saw one of these in operation in Las Vegas. The guy realized I was into the tech side and he explained it all pretty much like you did. He also mentioned there was another technology at the time that used 2 lasers at 90degree from each other and where they collided it put a bubble. He said that he had done a lot of research before buying though and the other system was more money and much harder to calibrate (both lasers at a needle point size must hit each other exactly) and that they would get out of alignment very easy which would either end up with no image or one that looks fuzzy. That other company is probably long gone now.
Good video. I already knew how this works, and you explained it very well without getting too deep.
So what type of glasses/crystal can this be done with? For example can you do this to sapphire sheet/block?
Thanks,you answered one of my oldest questions.
FINALLY! Thanks Angus for explaining!
I've always been curious as to the specifics. Thanks Angus.
I was always intrigued by that by that technology since I bought a glass block with London iconic and historical buildings for my grandpa as a present for only 20 pounds, which seemed cheap but totally good quality.
Quite remarkable; thanks for making this. My office just got a congratulatory cylinder sub-surface etched and I was very curious how it was made!!!
I have always wondered how that worked ever since I saw one of those things it's bothered me for years I'm glad someone finally made a video about this
Neat! We have one of these and engraved is my dad.
I remember he mentioned about lasers and I was curious but was too lazy to search up
I found best channel
We appreciate this info. My sis and I are ready in using one.
Where do you get the materials? And what devise is best to start?
Hello Sir/Ma'am How can I bought your products??
Thanks for the explanation. Bougth a pegasus in glass today because I was curious. Now I know.
I enjoyed your video and I want to learn more. Keep going. Best wishes
It works exactly how I assumed it would. Gonna thank myself from the past for studying effectively.
Pretty neat. Would also love to see some videos on affordable "hobbyist grade" laser engravers.
There's a few low cost kits, but I've been cautious on using them because they have zero safety considerations. Touch a hotend you'll get a burn, shine a laser in your eye you're blind for life... Don't really want to promote that kind of thing to be honest.
A nozzle burn I can take. Blindness definitely not. I've read a little about the Muse - the laser device not the Aussie ;) - but that's not what you and I might call "affordable". I was hoping someone made a less-expensive unit with all the proper safety interlocks. Maybe someday.
Like Trinus or Mooz?
Just for the record: Fablab genova made an 80W CO2 open source laser cutter implementing all safety interlocks like commercial machines usually have. The total cost was around 2000€ for a 1250x780mm work area. They did a great job. You can see the machine in this video th-cam.com/video/_z17imYLvGM/w-d-xo.html
Awesome video Angus! Very informative. Loved it.
Thank you for answering my question
I only looked this up about 2 weeks ago!
My previous boss had one on her desk for years, and I picked it up while visiting recently, and decided I really needed to know how it was done so I could find out if I could do them myself :p
always wondered! thanks for this one
thx for video i have question i just start to 3d internal engraving bussines but it is hard to make 3d its lookin ok but taking a lot time
do u know same software convert 2d to 3d lss or mbf format thx again
I was thinking an x and y axis laser whose combined heat leave a mark where they cross. Thanks for the clarification.
I've been wondering about this for years! I've seen the really see videos that barely give an explanation where I'd still be thinking "but how?" So thank you for giving a good explanation
Hey Man.. need help... I am trying to engrave a QR code in Acrylic with Laser....
Th problem is its not scanning....means it ends up unscannable.... can you enlighten... will it work or never work!
Would really appreciate your response in this!
That's pretty cool Angus - and you've shone light into some aspects of the process I'd never heard of or given any thought to. Kudos
In the 1990s I worked for a company that bought a color laser printer. At the time, that printer cost $20,000. Crazy how prices for tech changes so quickly.
Does anyone know where I can purchase slabs of glass for the laser engraving? Manufacturers or distributors?
Hi, which manufacturer would you recommend for this 3d crystal laser engraving machine?
Nice explanation thanks for taking the time to share, great job on the video too!
Awesome vid! Especially for curious ppl:)
4:10 it also means that you can use a lower power (therefore cheaper) laser as with quick a succession of on off cycles you can pump more power into a lower class laser without damaging it and still have a great final product.
Great video thank you
This guy is adorable. Thanks for the great explanation, these always fascinated me.
You found something not on youtube? Impressive.
I worked for a company in Mexico that makes those engraved cristals, and the models used are very similar to the ones used for 3d printing. So if you have some models that you want on cristal, you can look for a local shop that can engrave them for you.
Hello, can I reach you?
I learnt something! I was sure that an X and Y laser crossed at the point where the bubble was formed.
Fascinating! Always wondered about how they did this. The idea I had in my head was completely wrong. Thanks :)
I remember when we found this anomaly playing with Lucite in the lab back in the mid 90's. This first time I brought home a block with my wife photo in it. Talk about brownie points that day.
Is there a way that I could use some sort of 3d printer to make a hollow 3d object inside the glass???
Hey Angus...do you have any suggestions for pearlescent/iridescent PLA filaments?
We have a Boss 1630 and an Epilog. Can they be converted/adjusted to do this?
Should I be able to mount a laser to my prusa? Because we’re not burning things there wouldn’t be any smoke either. Any idea on where to buy a clear cristal block?
Can you create a vacuumed space, hole in the glass, or are all cuts filled with something? What is that something?
Do you have a link to where I can buy one of these machines please?
u ever find any?
@jamiegaudet6008 I did but I have found the machines to be super expensive and only 1 Chinese supplier :-(
It works better with glass. You can get clear glass paper weights , and with the right engraving program and a very good digitizer you can get 3D images.
My grandma had one of these for the longest time with the image of a fairy. Very interesting to learn how it was made!
Thumbs up for saying bubblegram sounds stupid.
Is there some service that allows for very small orders for a reasonable price (like Shapeways or iMaterialize for 3D printing)?
Never seen this before tbh but it looks cool and it's interesting to see how it's made.
I remember reading on a forum about people using two lasers and the intersection is where it would engrave in the cube
Thanks Angus nice video if any software program that you recomend to use on this 3d laser machine i jutst got me a cryslove b2 machine and willing to get my hands on the machine and star doing glass cube thanks in advance keep doing great videos
lol finally a good video on how its done lol did the same search till found yours
You have worked on laser engraving can you tell me how to convert a image to engraving format