dat deed ik zo'n 65 jaar geleden de eerste 10 jaar met de hand later machinaal eigen fabriek met 55 medewerkers maakte hoofdzakelijk dynamo;s LUCAS NERTHERLANDS. TOT 1997 GESTOPT OVERNAME DOOR SIEMENS, als ik ik dit zie schieten de tranen in mijn ogen. zo,'mooi vak werk. veel sucses (Airscan netherlands nick.
great work, super impressive. I am learning through TH-cam to rewire a motor. What I don't see yet is if, every time you wind those 4 loops together in that spindle-like machine, whether they are all connected. In other words, you finish one loop, take the same wire over to the next row and start winding with that same wire. Which is to say: 4 loops, but only 1 wire ? or is it really 4 loops and 4 separate wires on that spindle-like machine. I suspect the former, but I can't see it yet. I shall try, and see if it works. Thanks.
Imagine in the west I scrap perfectly fine motors. No one fixes broken ones under say 50hp. Heck a lot of 50hp - 100hp motors get scrapped, perfectly working. I only seen someone fixing a motor in India.
good job without measurements and directly connected without any protection. Why you didnt exchange the bearings and measure the caps. Some improvements are nec.
There is an error in Copper wires because the engine is weak in rotation or because of the insulating fluid that you put in. However, well done from Algeria🇩🇿
My god. That's impressive! You, my friend, are a highly-skilled restorer. And to think, all I do is scrap these things when they go bad. Good for you for having the time and skills to do these things! By the way, I noticed that your electrical outlets are different from North America's. Is this one European? Or somewhere else? I'm just curious.
Very nice job. If you changed the stator winding, you could have made a three-phase motor. This motor was three-phase and someone converted it to single-phase by adding two starting capacitors. After this change, the engine has less power and will tire when loaded with a compressor
basically its still 3phase motor, just connected to capacitors. He still can use it as 3phase If connected straight to 400 V, but maybe he wanted it to be 1 phase via capacitors as its easier to connect it to standard 230 V? But you are right, like that motor has less power
dat deed ik zo'n 65 jaar geleden de eerste 10 jaar met de hand later machinaal eigen fabriek met 55 medewerkers maakte hoofdzakelijk dynamo;s LUCAS NERTHERLANDS. TOT 1997 GESTOPT OVERNAME DOOR SIEMENS, als ik ik dit zie schieten de tranen in mijn ogen. zo,'mooi vak werk. veel sucses (Airscan netherlands nick.
I don't think many people would have the knowledge or expertise to rewind a motor. Amazing work! Great outcome.
Excellent work you are expert and it looks beautiful too 👍
You, my friend, understand the business - electric motors. It's a pleasure to watch how nimble you are. Good luck in the future.
Bác quấn đẹp quá
Bạn sửa motor tuyệt vời quá...triệu like 👍
It looks very good. Thanks for sharing
great job👍
great work, super impressive. I am learning through TH-cam to rewire a motor. What I don't see yet is if, every time you wind those 4 loops together in that spindle-like machine, whether they are all connected. In other words, you finish one loop, take the same wire over to the next row and start winding with that same wire. Which is to say: 4 loops, but only 1 wire ? or is it really 4 loops and 4 separate wires on that spindle-like machine. I suspect the former, but I can't see it yet. I shall try, and see if it works. Thanks.
excelente, saludos desde Argentina, Buenos Aires.
You can do it go on good job
Maravilloso el trabajo y satisfecho de verlo, desde el primi pio a la término ion. Saludos desde Canarias España.
Muy buen trabajo felicidades.tienes el vídeo de cómo ASER un cautín como.el tuyo saludos cordiales desde Chilpancingo Guerrero México
Would have been interesting to see if the motor worked before disassembly...
Super jest odrestaurowany ten silnik na siłę z możliwością przerobienie na prąd światło Pozdrawiam serdecznie. 👍👍👍👍
super travail, je suis admiratif ...bravo pour le savoir faire @++++
Imagine in the west I scrap perfectly fine motors. No one fixes broken ones under say 50hp. Heck a lot of 50hp - 100hp motors get scrapped, perfectly working. I only seen someone fixing a motor in India.
SENZATIONAL!!! BRAVO!!!
good job without measurements and directly connected without any protection. Why you didnt exchange the bearings and measure the caps. Some improvements are nec.
Good job, watching from phillipines ,bacolod city
Nice work
Tuyệt vời , chúc bạn thành công hơn 😊
هذا رائع❤
Glorious sound of crunchy bearings
very good work. if you see change the stato, bạn
Маш сайхан ажил...👍👍👍👍
That's good job in you got done sir.
That's incredible 👍👍👍👍👍👍👍👍👍👍
Đồ lượm đầu clip chắc ở vườn nhà ông hay chạy chỗ ve chai chứ vứt ở chỗ công cộng tại VN có mà bị đồng nát xơi sạch. 😄
Instructivo video. Enhorabuena. Un saludo desde Fuenlabrada (Madrid ) España.
Not a criticism, did you mess up the he winding count? I say so because it is not spinning as fast. I did this on my first motor rebuild.
amazing video
Awesome job. well done.
Hola, muy bien hecho 👏 eres un profesional perfectamente cualificado,, gracias x conservar el oficio.. x mi parte lo deje, años atrás..
)q
There is an error in Copper wires because the engine is weak in rotation or because of the insulating fluid that you put in. However, well done from Algeria🇩🇿
This is a serious skill, and rather obviously this man is an expert at it.
Классно он его «залачил» … Такого я ещё не видел!
Sir, good job
Louder than it should be
This is some next level wizardry 👏
Excelente
😎👏👏👏
I wish I could know all about what you did!! Amazing rewind motor!!
tnx man you save my 800 tk ❤️😇
Man you got skill
what oil is being used to coat the wire?
Nice sir
you need 3250 rpm motor, that one is too slow for a compressor.
Do you have a video on restoring an airbrush compressor?
other then painting over rust and what looked like the old bearing but good job though :)
Um top 10 abraços.
bon travail
My god. That's impressive! You, my friend, are a highly-skilled restorer. And to think, all I do is scrap these things when they go bad. Good for you for having the time and skills to do these things!
By the way, I noticed that your electrical outlets are different from North America's. Is this one European? Or somewhere else? I'm just curious.
Việt Nam
@@tamtran8939 Interesting, because his profile says United States.
Carecas mano kkk é fato
What kind of witchcraft is this? ;) Beautiful job!
Cómo se llama la herramienta que saca la polea
It is running slowly and the capacitors need to be replaced
The challenge will be what sequence to connect the sets of coils. Would it be opposites or side by side to result in the four/six available wires.
Impressive
Very nice job. If you changed the stator winding, you could have made a three-phase motor. This motor was three-phase and someone converted it to single-phase by adding two starting capacitors. After this change, the engine has less power and will tire when loaded with a compressor
basically its still 3phase motor, just connected to capacitors. He still can use it as 3phase If connected straight to 400 V, but maybe he wanted it to be 1 phase via capacitors as its easier to connect it to standard 230 V? But you are right, like that motor has less power
THANKIOU
31:56 what?! That thing run on Diesel?😂😂😂😂
Хорошее видео, можно узнать мощность двигателя и от чего он сгорел?
Salaalukom
AMEN !!!!!!! THANKS !!!!!!!!!! JESUS CHRIST IS LORD !!!!!!! AMEN !!!!!!!!!!
AMEN ❤ !!!!!!
I've never seen someone pray that a motor be restored, but to each his own I guess...
If it means I don’t have to redo winding in any of my motors.. I’ll pray for my motors to be restored all day 😂
like.
Thank sir
Muito bom Campina
De baixa rotação
Please share winding data.
1.5hp 2hp?
nước muối
👍
🙏🙏
فنان
Amusing
👍👍👍👍👍👍👍
🤗🤗🤗🤗🤗🤗💯💯💯💯💯💯
OK 👍
What's that fire used in there???
Looks great and great job my friend! 👌🏻👏🏻👏🏻👏🏻👏🏻👏🏻🤙🏻🇺🇸✌🏻
Great
👍😘
Nice
Wow
Super sir
Thanks
Super 👍🏻👍🏻 🇮🇳 || Kuki 02|03|2022
Keren
33:00 I think that's the most pimped out air compressor I've ever seen.
❤❤
Shdahdaz
👍👍👍👍👍👍👍👍👍👍👍
24:32 What is that liquid?
Клапан давления не не слышали😅
Listen to me please
Replying me
Весьма оригинально, конечно, выдрал обмотку, даже схему не зарисовал, на глаз мотал то что ли?
Disc h VC do jb
আমার মতো কে কে আছেন যাদের এই ধরণের ভিডিও দেখতে খুব ভালো লাগে,,, লাইক দিয়ে জানিয়ে যান 😊❤️🇧🇩
supper
Bom
👍👍👍👍👍👍