⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/channels/k_lcDzEWLs5fVRYceK3-9Q.html ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Dodge pedal or throttle body replacement doesn't require a scan tool to relearn .It makes its super easy but it is not needed.Your not reprogramming the ECM here , your just telling the ecm to relearn the pedal and throttle body positions which is also done without the scan tools. You really need a scan tool capable with live data of all sensors to diagnose but it is not needed to do relearn after replacing the throttle bodes or the inside gas pedals.
Did you get answer to this question? Can you just replace and put the new part on and will it calibrate itself in due time? Or does it require a computer scan to relearn the new part?
For people fooling around with the throttle body, replacing or cleaning. have a shop level scanner and a 12+8 bypass gateway connector if you're fooling with 2018+. also have wifi or mobile Hotspot available . I did a 2018 dodge journey TB replacement which required a shop level scanner, 12+8 bypass connector, and wifi. I used my mobile Hotspot & used a OTOFIX D1 PRO scanner to relearn the throttle body.
I have the same issue after replacing the throttle but now the light only comes on, on cold starts but after it warms up I shut it off and start back up light goes away what could be Causing this issue and also I use the same scanner to relearn
Take both battery cables off and tie/hold/connect the negative cable with the positive for 45min-1 hr, put the cables back on and let the car run for 10-15 minutes.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos:
th-cam.com/channels/k_lcDzEWLs5fVRYceK3-9Q.html
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Dodge pedal or throttle body replacement doesn't require a scan tool to relearn .It makes its super easy but it is not needed.Your not reprogramming the ECM here , your just telling the ecm to relearn the pedal and throttle body positions which is also done without the scan tools. You really need a scan tool capable with live data of all sensors to diagnose but it is not needed to do relearn after replacing the throttle bodes or the inside gas pedals.
What of you don't have money to take to a mechanic or a computer any other way to relearn the computer
Answer this question plz
@@yodiggievilla3825 did any of you get the answer to this?
Did you get answer to this question? Can you just replace and put the new part on and will it calibrate itself in due time? Or does it require a computer scan to relearn the new part?
This youtube channel never replies on comments here or instagram messages. So dont bother. TRQautoparts is way better
For people fooling around with the throttle body, replacing or cleaning. have a shop level scanner and a 12+8 bypass gateway connector if you're fooling with 2018+. also have wifi or mobile Hotspot available . I did a 2018 dodge journey TB replacement which required a shop level scanner, 12+8 bypass connector, and wifi. I used my mobile Hotspot & used a OTOFIX D1 PRO scanner to relearn the throttle body.
Make a tutorial bro
@237hunna I really wish I could have, if that aftermarket TB fails, and the customer brings it back. I'll do a step by step video.
Will disconnecting the negative battery cable cause it to relearn?
Thank you i love your video. How to program new Dodge Journey cluster? or is it plug in and work?
I have the same issue after replacing the throttle but now the light only comes on, on cold starts but after it warms up I shut it off and start back up light goes away what could be Causing this issue and also I use the same scanner to relearn
is there a way to do this relearning without the 2000$ computer u have in your hand ?
Take both battery cables off and tie/hold/connect the negative cable with the positive for 45min-1 hr, put the cables back on and let the car run for 10-15 minutes.
I love your videos
Do you actually need the $3000 scan tool?
for real im trying to do this on a budget lol
I wonder if the king bolen scanners can do it
DON'T BUY A DODGE JOURNEY. I DID AND REGRET IT!
Biggest piece of shit I've ever driven
I like mine 😌
I have a 2012 and omg I’m sooooo mad
it's a pain in the ass “”
Mines great. It’s 9 years old now so it’s got it groans and moans. As expected from a 9 year old car