Awww Bennny even has "X 'gon give it to ya" confused. It's the beginning to a DMX song of the same name from the late 90's/ early 00's. It was also more recently popularized in the Ryan Reynolds Deadpool movies.
All I know is that I am thankful I’m not judged by hundreds of thousands/millions of people regarding cultural references from another country, regardless of which country is being discussed. I know American pop culture enjoys distribution close to or matching Marlboro, Coca-Cola or our own currency but I’ll give anyone a pass on that sorta thing. @ryanhoffman9341, I know you were joking; I’m not being a pedantic wanker just using way too many words to express a simple opinion. Cheers! 🖖😎👍
@@BennysCustomWorksThe second you mentioned Xzibit I scrolled down to the comments. Not to correct you but to see if people actually behaved when they pointed out it was a DMX song. I am very glad to see that most people here actually know how to behave like a decent human being. Makes me all giddy inside :D
Twix is made by "Mars" not only am I an American, but my Grandfather worked at the Hershey Factory before I was born. In 2008 Hershey's changed their formula, and yes, it absolutely sucks.
"Wheely good suggestions" - love it Gian - well played. That car horn approved the clutch calculations. Later Benny, is that a relation of Future Matt? Also 'Huuuurrr'. I love this channel, its that cool, its cooler than penguin piss.
every jz clutch i do i throw the pressure plate and friction discs on the input shaft and install the box and then thru the inspection covers on the lower sides of the bell housing dp it all up
Whilst I am more than comfortable with engines I am totally lost with gearboxes, clutches and automatic transmissions. I did change a manual clutch on a Torana XU once. That was pretty easy. Everything after that = hard.
Benny when welding in the car get a plastic take out container and put a hole in it the size of your mig torch hold the container over where you are going to weld put the torch in the hole and weld the sparks will get caught in the container and not bounce around in the car and burn any interior or pit the glass but use a fire blanket as well. Have you found the cause of the no oil pressure in the LS yet cheers glenn
@@BennysCustomWorks yeah I’ve been buying them individually since the mid 2000’s to suit the different mechanical industries I’ve moved through. Kinchrome used to do a set but they were a bit bulky which sort of defeats the purpose for trans/box work.
@@BennysCustomWorks Ahh, different kind of knife...the Swiss army kind. Fold your everything back into place. Much better option mate, I hope it does the trick.
The wheels that Mad Mike had on Madbul early on in that car’s development. They looks similar to Lowenhart LDR but they were a JDM brand. That would give off a similar look to Centerlines. Or you go Western Syd spec and just get some Simmons 😂
Hershey chocolate is made with sugar beets or corn syrup, but ours is made with sugar cane so it's sweeter. I agree, I don't like US chocolate. It tastes bitter. P.s. I think brake cleaner will kill us before organic clutch linings. P.s.s Before the internet, almost no one used torque wrenches.
I heard you like benny's custom works, so I put benny's custom works, in your benny's custom works, so you can benny's custom works, while you benny's custom works.
Awww Bennny even has "X 'gon give it to ya" confused. It's the beginning to a DMX song of the same name from the late 90's/ early 00's. It was also more recently popularized in the Ryan Reynolds Deadpool movies.
Yep. I was awaken by this error at 3am….
@BennysCustomWorks It is all in jest. We kid because we care. Absolutely love your content!
All I know is that I am thankful I’m not judged by hundreds of thousands/millions of people regarding cultural references from another country, regardless of which country is being discussed. I know American pop culture enjoys distribution close to or matching Marlboro, Coca-Cola or our own currency but I’ll give anyone a pass on that sorta thing. @ryanhoffman9341, I know you were joking; I’m not being a pedantic wanker just using way too many words to express a simple opinion.
Cheers! 🖖😎👍
@@ryanhoffmann9341 no I mean I came to the realisation at 3am the other night
@@BennysCustomWorks gotcha. That's pretty funny.
All of your references "old man yells at clouds" etc are my time. I think we would be good friends.
The random chats are hilarious and sort of "glue" the whole episode together. Love it!
DM..X GON GIVE IT TO YA
Dang it... 2 hours late😂
Pimp my dog
RIP DMX
X going to deliver it to ya said in the whitest way possible 😂
In fits @@BIGPOG😂😂
Love the banter between you guys. Feel like I am learning along side Gian.
It's a grapefruit lol. Episode where they get stuck on an island. Reminds me of lord of the flies
😂😂 dmx, PMR, Simpsons reference anyone would think we are old👍😂
The number 1 just so happens to be a subscriber to my channel.
That 2JZ CROWN BUILD Good job Fixing it Benny's 👍👍👍
"MTJ grasping at screen" I need the shifter!😂
X Gon Give it to Ya was a DMX song and was actually in reference to the X in DMX.
Yep. Woke up at 3am the other day realising the error of my ways
@@BennysCustomWorks been there before.
My American sensibilities to RIP DMX were all a fluster.
I enjoy the anecdote about Xhibit and PMR. I didn't know that one.
@@BennysCustomWorks here you go mate. In what action movie was that song used?
@@BennysCustomWorksThe second you mentioned Xzibit I scrolled down to the comments. Not to correct you but to see if people actually behaved when they pointed out it was a DMX song.
I am very glad to see that most people here actually know how to behave like a decent human being. Makes me all giddy inside :D
One of my favourite things about putting an after market clutch on falcon was being able to bleed it.
I made a couple of bulk head fittings and went thro the bell housing for the bleed hose and 'power' hose
Twix is made by "Mars"
not only am I an American, but my Grandfather worked at the Hershey Factory before I was born. In 2008 Hershey's changed their formula, and yes, it absolutely sucks.
Yes twix is mars but kit kat I think in the US is Hershey. Kit kat in Aus is a Nestle product
You're right about the tyre size printed onto the tread, Benny. It's so you can see what size the tyre is in a stack.
Get some old MB/AMG Monoblock wheels for the Crown to confuse people. Like the Ferrari wheels!
"We're going to be kings. Hell damn ass kings!"
"Wheely good suggestions" - love it Gian - well played.
That car horn approved the clutch calculations.
Later Benny, is that a relation of Future Matt?
Also 'Huuuurrr'.
I love this channel, its that cool, its cooler than penguin piss.
BCW. Always keeping it wheel.
Glad you got a gearbox specialist on the job cause that was actually in third gear when you showed Gian....😂
In Subaru land back is 4th, force of habit.
@@BennysCustomWorks Oh yes Lisa, a wonderful, magical land...
Keep it up Benny!
It's gunna be a cool car when you're done.
every jz clutch i do i throw the pressure plate and friction discs on the input shaft and install the box and then thru the inspection covers on the lower sides of the bell housing dp it all up
Already have Convo Pros, get some Centerline Warrior wheels for that ine
Whilst I am more than comfortable with engines I am totally lost with gearboxes, clutches and automatic transmissions. I did change a manual clutch on a Torana XU once. That was pretty easy. Everything after that = hard.
3:41 YES! THIS! Can you get the seasalt caramel ones? They are the absolute best!
T+e do the flexible drive sockets at a much nicer price.
Best yapps eva
I use to use the old kinforrest tyres too!
KF550 for the win :D
Benny when welding in the car get a plastic take out container and put a hole in it the size of your mig torch hold the container over where you are going to weld put the torch in the hole and weld the sparks will get caught in the container and not bounce around in the car and burn any interior or pit the glass but use a fire blanket as well. Have you found the cause of the no oil pressure in the LS yet cheers glenn
Thanks for the tip mate, the 6.0 is being torn down next week hopefully
Those snap on swivel sockets are gold. $90 - $130 each though. I got 10, expensive little socket rail that one…
They just came on special for 14-21mm
@@BennysCustomWorks yeah I’ve been buying them individually since the mid 2000’s to suit the different mechanical industries I’ve moved through. Kinchrome used to do a set but they were a bit bulky which sort of defeats the purpose for trans/box work.
Nice one fellas, keep on keepin' on.
Milhouse rolls a grapefruit fast after the apple and orange and it goes under the brake pedal and citrus goes in Otto's eyes.
Hilarious 😂
I knew someone would be on it!
@@BennysCustomWorks I get every single simpsons reference. I dedicated a lot of my life to it 🤣
I reckon it would look pretty good with a set of draglites on it
Was chatting to your hommie from the states today with his barra pano van. Hope your back heals up bud. Cheers. #hardass1000
Specialist tomorrow :D
Get well soon. See ya at the next one 🤙
@@BennysCustomWorks Farrk mate, good luck! Are you going under the knife or do they have a better way?
@@someyoungguy6990 na not that type of specialist, I’m trying anything to avoid surgery tbh. Getting folded in half :D
@@BennysCustomWorks Ahh, different kind of knife...the Swiss army kind. Fold your everything back into place. Much better option mate, I hope it does the trick.
The wheels that Mad Mike had on Madbul early on in that car’s development. They looks similar to Lowenhart LDR but they were a JDM brand. That would give off a similar look to Centerlines. Or you go Western Syd spec and just get some Simmons 😂
Now get your snappy bloke to order you the 33” 1/2 to locking 3/8 extension to go with the swivels
They’re 1/2 sockets though?
Marketing level 1000 😂
X also didn't get onboard with the Yo Dawg meme at first. Until he realized the meme wasn't taking aim at him.
Did i miss a vid or mention where you actually got the new input shaft installed by a gearbox place?
Yeah you missed a vid mate
That bin with wheels got air time...
Is that the good one with the wheels? I've heard it's shit, something about the bottom exploding when you look at it 😂
I got it immediately
Benny! DMX not x-ibit
I literally woke up at 3am the other day realising this…..
I got the song reference just for the record
Hershey chocolate is made with sugar beets or corn syrup, but ours is made with sugar cane so it's sweeter. I agree, I don't like US chocolate. It tastes bitter.
P.s. I think brake cleaner will kill us before organic clutch linings.
P.s.s Before the internet, almost no one used torque wrenches.
I very rarely use torque wrenches, but when the part is laser etched I’ll do it
Feeling bad for later Ben.
Hi people Benny missed the bin with the rubbish bin throw
X gon give it to ya 😂
Millhouses grapedruit gets stuck under bus brake pedal.
Got it😂!
I thought it was a DMX reference not x-ibit
It was. It was already a long day at that point.
@BennysCustomWorks i guessed as much mate! 🤣 we'll let it slide haha
also, not over this car. make it do the fun things and show us the journey pls
Flamingo's eat gravel/rocks to help grind up the fibrous stuff they eat in their bellies.
I heard you like benny's custom works, so I put benny's custom works, in your benny's custom works, so you can benny's custom works, while you benny's custom works.
Grapefruit
i got it!
If it's worth doing..it's worth doing atleast...12 times...poor Jeff.
Grape fruit 😂
its dmx not xzhibit
wheels - put hotwires on it :D
Organic in relation to anything but food just means it contains carbon
Surely as a drag race guy you have a least favourite number... like 8.50 😂
As a US citizen, Hershey chocolate is absolute trash
Jnc 001 wheels
And also I got the x gon give it to ya reference lol and then reading the comments and seeing you already realized made it even funnier 😂
They look like a bad version of XXR’s
@@BennysCustomWorks ehh yeah I could see that lol but still it’d be different
You can tell when your mates been around... Toilets never flushed & the cats pregnant....
Do you get paid for working at mighty car mods?
Do you get paid to go to work? Pretty odd question.
Im 5
Hurr
DMX not XZIBIT haaha
Moist
American here, hershey milk chocolate is garbage.