Those motors are reversible outside of software, you just need to re-order the pins of the hall-effect sensor as well as swapping around the blue/green wires. It was being so weird because it was trying to spin, and the sensors report that the motor is spinning the wrong direction so the controller freaks out.
@@ProdigyAutomotive Kit alone is around 1500$ to 2000$ for 11kw kit depending on battery you choose and closer to 1K$ for less powerful ones. Its cheaper than some kits i have seen but least for me i dont have extra income to throw 1.5k for racing go cart and 2K for electric setup, when you can get really good daily driver for that price and proper road legal dirtbike or get small diesel crate engine into cross cart frame, witch will beat this in utility in any day.
This is the hardest I have laughed at one of your videos. Going from "This is like owning a formula 1 car you drive in your mother's living room" to grind-khana donuts around a barstool and table and tire tattooing Ethan's new garage floor is epic level content. You guys have done it again.
20:25 YES THAT BRACE WILL GIVE YOU MORE SPACE BETWEEN THE STEERING SHAFT AN SEAT! *AN A ADDED FREE BONUS!*, IF YOU GET REAR ENDED IT WILL FLING YOU FORWARD AN CUT YOUR *( WRINKLED DINK! BAG!) RIGHT OFF! AN YOU RECIEVED A FREE VASECTOMY WHILE BURNING LAPS! LOL SMH *GBYAA!!!!!!!!!!!!*
The timing of that "somethings about to go wrong" and seeing that thing donut once it was the correct way looks like the video has been sped up, absolutely crazy cant wait for more videos on this thing!!!
I just finished my 50cc 2 stroke pedal-tractor thing and im super hyped about it, I started the build some time ago when i got inspiration from you guys and the grazy builds that grindhard has made.I wanted to tell this because i felt that grindhard was the reason that bringed me joy and hope while building that not so powerful,not so fast,not so grazy, but SO fun thing + it drifts good when power falls from the skies hope you read this! -Aapo 13 years old from Finland
I hope they read it too. I wish you the best of luck. Relate to your greatness and not to your weakness. Much ❤ Love 🌎🌏🌍☯️⚡️ World✌️Peace From New York State
Pedal tractor like the childrens toy? That sounds amazing! Doesn't have to be fast to be cool, man. That sounds awesome, honestly! And I'm 32 😂 props to you for taking initiative, and jumping in and doing it, it takes guts, motivation, patience and perseverance, good on you, keep it up! Much love from the US, hope the fellas see your comment 😎
Im big into large scale rc cars and absolutely love this. Ive considered useing one of my 5th scale rc motors with 20hp to power a small go-cart for me and my kids. This motor looks stupid powerful.
Guys! When you want to reverse the direction, you need to change two phase wires and two wires of the hall sensors if you want to do it the "long" way. The short way is to reprogram the controller (as you mentioned), changing the correct setting (indicated on the programming software) will make the motor spin the other way. Trust me, I've done it both ways.
@@rendaddy_ Just the way 3 phase motor works, that would be the solution. The fact that they didn't suggest it means that they didn't know or didn't want any mixed wires. All they will do is connect the controller to a computer and program it the correct direction. All my cheap controllers can work by switching the wires and my decent ones can very easily be programmed via adapter and USB cable. This is universal.
@@esqueue I'm guessing it's a liability thing. It's far safer to say send the controller back, that minimises the risk of damaging hardware and having other people see the video and hot wiring their own motors.
Shhhh I think he was just being lazy, he even says “I do electrics” lol. Or it’s part of the sponsorship? Just another way to name drop the company? Bad Ethen bad!
This is the first time I watch a video for you folks and after like 5 minutes I knew I landed on the right spot... What you do is exactly what I dreamed of doing but never really did
This group of awesome people helped bring back that dream i had growing up. I started a little side hustle with a Decent name I'll share once its legally mine lol. I started buying project ATV's and mini bike go/street-karts and started on the first custom build. Sometimes you lose sight of your dreams but it's a nice feeling to be reminded and its amazing how well its working out. So thank you guys for reminding me to focus on what makes me happy.
I’ve watched all your videos for several year and they’re great. All the bills are y’all do are ridiculous. I live in the south so snow is not available lol y’all do a great job on building random build keep it up guys 👍🏼
when i was younger i would build things out of nothing and it worked. i love to see yall make such fun creations out of scraps from other builds. This is so much fun.
The best thing about these little builds is how approachable they seem. Like a motorcycle engine might be cheap and easy to obtain, but it's so friggin' heavy compared to a small electric motor and battery you could almost slap on anything with wheels in a couple of days and get obscene speeds. (well, assuming your motor controller isn't the wrong way around... Also: Edited for typos I didn't notice originally...)
I wonder how much the motor and battery weighs compared to the 2-stroke engine a fuel tank. For something this small there probably isn’t much difference
@@AussieDaz87I'd imagine the weight of this electric setup is probably really close to like 125 or 250 2 stroke engine with the flywheel/stator attached (45-55lbs). However, the torque that this electric motor can instantaneously produce makes the beefy powerband of a 2 stroke feel like a 49cc gas engine in comparison. Seriously, anyone who rides bikes or karts owes it to themselves to try out a comparable electric powered setup. The G's you'll pull with good traction will blow your mind.
This is the coolest make it electric from scratch channel I've seen, U-Tube needs to introduce these guys to Edison diesel electric company. a match made in heaven.. thanks for lifting my spirits...
This video could not have come at a better time! A good friend of mine has decided he wants a go-kart track in his backyard. It will have some elevation changes and cambered turns, etc. It should be epic! but we can't use gas carts because of the noise (friggin neighbors!) I suggested finding rough/retired shifter karts and put in electric motors. I don't think he fully got the concept. I'm definitely sending him this video. This thing you're building is overkill, but it's the right idea.
@@eliangreatrick6620 sure. I purchased 4kw / 14kw peak bldc motor kit. It's 72v nominal 200A peak. It was designed for motorcycle conversions but it can be used for go kart. All I had to do was to purchase a 0-5v throttle. The hardest part was to make the motor mount. I don't have CAD plasma cutter like these guys lol. Battery was easy for me. I am using LFP Headway 38120HP cells 24s2p pack. Let me know if you need help.
Watching the first half of this and just thinking, "Wonder when Ethan is going to see these guys..." *midway through* "WILL! That's a $6000 garage door!" "Okay dad I won't break it!" -Will :)
Pulling him behind that six-wheel drive on the gocart without a helmet was a brave choice i know rocks getting kicked up from the tow vehicle are traveling fast enough to kill a person if one decided to hit the person being towed in the gocart in the right spot. Id probably have done that exact same thing but sometimes thinking about what could happen is worth the time
@@jakeparker-wv4mwMe too! We would love to work with them! I have a company that distributes Second Life EV batteries at ~50% the cost of market. We can really help this community and want the Grind Hard guys to be able to push their electric builds further!!
You might consider putting a return spring on the sensor side of the throttle cable. Or at least make sure you have a good kill switch (maybe a lanyard style) I found have that out the hard way. Haha😅
It’s so funny to watch how excited Will and Edwin when they get excited about a project!! It’s like watching two little kids that just figured how to bypass the governor on a Briggs, but amplified to 10!! Meanwhile Ethan is “don’t break my door” Ethan is growing up 😮😂😂
Hey you mentioned local places to drag race. You can't race a car at this local event but, Old Town, Idaho has an annual motorcycle event called Run Watcha Brung in July and you basically drag race almost ANYTHING. I go every year and my job helps sponsor the event, I'd love to see you guys out their!
The tow job at the start was the most gen X stuff I've seen for a long time. Congrats guys, it's renewed my faith in your generation to have fun and do it right
Will: “I have a fear about these blades” Also Will: *proceeds to used grinder without a guard 😂 Hope the giveaway is open to international entries, couldn’t find anything that said otherwise and bought a few things!
Your fear of the cutoff wheels on the angle grinder is very very valid. You should ALWAYS have the guard installed on the grinder! If you, for what ever reason, can't do that then wear a full face shield/welding helmet.
I remember waaaaaaaaaaaaaaaayy back when you first built that Barbie Jeep! An now look at ya giving away something we all need in our shop: a plasma cutter for free! Lets Go Grind Hard!💯💪🏽💯 You the real MVP! I want to see more of this build!💯
I suppose the instant torque of electric motors does have some downsides. Thing was like an on/off switch. I thought for sure Ethan would open the garage door after being concerned about Will hitting it. Luckily it remained intact.
@@MADEINNSW The level of control they appear to have, the power curve isn't set correctly. It seems nearly an all or nothing response, with not enough ease-in. It's either that or they have such a lead foot they don't know how to ease in on it. Heavier spring on the throttle pedal may not hurt either.
That really is some premium dirtbagging amongst genuinely decent friends taking place right there at or around the 6:39 mark - special callout to checkout the action at the 6:46 mark cuz if you pause it just right, you'll see legit proof that they all actually really do love each other so very much and hanging out and being around each other. Simply just a sight to see and one of the reasons I root for these boys right here!
Pro Karting driver here, if yall ever track that kart or do some fun street stuff, I recommend trying to get Mojo D5 kart tires if you have a 7 inch rear rim, or Vega Blue tires for 6 inch rims. It might be very tricky getting a hold of these tires as they are used for professional karting and they are pricey, but trust me, for a kart with that much power it would give it good grip
I have watched a ton of GHP videos and this one made me shake my head and second guessing my desire to watch more. Hey let's crash into everything in site. Then keep going and do it again
Please please please do an urban takeover sort of video with this thing. Probably too late now with winter finally here, but go rip around downtown Sandpoint at 2 am on a Tuesday night and get some good clips of it. Different style video that everyone here would love.
There are ways to do wild stuff, but from dragging it with the truck to all the nonsense in reverse could have gone bad. Ain't hard to wear a helmet, at least for the younger kids watching and copying their fav youtubers etc. keep up the wild videos, but think about whos watching your content and the influence you have on helmets in general bros.
It's cool to see Will taking on more projects. It's also cool to see you guys doing stuff with electrics. Speed and power don't care about their source!
The timing on him saying "I feel like something bad is a out to happen" was damn near omniscient, poor guy was having the absolute wildest groundhog day
6:41 Will... It is one of the reasons I like this channel and this alone would make a great drinking game. Randomly add some videos to a playlist and grab a bottle and a few friends.
We need a build guide for this double motor on somthing like a old Honda atv would b super handy and useable even fully submersible and wouldn’t ever drown out
The electric acceleration rush is exactly why I started ScooterFaster back in 2003. There is nothing quite like dumping 400 Amps into a vehicle that weighs less than 400 lbs. Rider included. That being said, EXTREME CAUTION should be used during the wiring and testing phases. Your throttle sticking WFO could have ended badly. ALWAYS BLOCK THE DRIVE WHEELS UP AND TEST THOROUGHLY. We used to run in a massive carpet mill parking lot with NOTHING to crash into. Closed on the weekends just for us. Search for a big parking lot and don't stop for rain...wet days are drift days and the tires will last more than 2 hours which is all you get when it hooks up.
We built a 20,000 watt drift quad th-cam.com/video/kffLczUZ8S0/w-d-xo.html
I love it when they take a break from the main storyline and just go on a side quest
Same these new style videos are just sooo PREMIUM!!😆✊️🔥✌️💚
Those motors are reversible outside of software, you just need to re-order the pins of the hall-effect sensor as well as swapping around the blue/green wires. It was being so weird because it was trying to spin, and the sensors report that the motor is spinning the wrong direction so the controller freaks out.
What kind of motor is this? I'd like to price one of those electric setups
I was gonna say I’m 104% sure I could’ve make that thing spin the other way
@@ProdigyAutomotive Kit alone is around 1500$ to 2000$ for 11kw kit depending on battery you choose and closer to 1K$ for less powerful ones. Its cheaper than some kits i have seen but least for me i dont have extra income to throw 1.5k for racing go cart and 2K for electric setup, when you can get really good daily driver for that price and proper road legal dirtbike or get small diesel crate engine into cross cart frame, witch will beat this in utility in any day.
@@ProdigyAutomotive I'm pretty sure it is QSMOTOR 138 or QS138 in short
@@darekmistrz4364 You're a legend thanks man 🔥
This is the hardest I have laughed at one of your videos. Going from "This is like owning a formula 1 car you drive in your mother's living room" to grind-khana donuts around a barstool and table and tire tattooing Ethan's new garage floor is epic level content. You guys have done it again.
"Tire Tattooing". That is Premium! 😂🙂😃👍
"Just send it" - flies backwards into the golf kart. I think I may have just woken up my neighbours with my laughter 😂😂😂
Epic
20:25 YES THAT BRACE WILL GIVE YOU MORE SPACE BETWEEN THE STEERING SHAFT AN SEAT! *AN A ADDED FREE BONUS!*, IF YOU GET REAR ENDED IT WILL FLING YOU FORWARD AN CUT YOUR *( WRINKLED DINK! BAG!) RIGHT OFF! AN YOU RECIEVED A FREE VASECTOMY WHILE BURNING LAPS! LOL SMH *GBYAA!!!!!!!!!!!!*
You should totally reach out to your local police/sheriff and see if they will close off a road for long enough to do a drag race.
Will : "I have a fear about these blades"
Ethan : "You should."
Spoken like a good dad figure!
I cut my wrist all the way to the bone with a 6 inch one, very big scar.
oh yeah he was in full on dad mode today haha.
He should put the guard on
seein as they don't have a guard on it . . . .
My friend had one of the blades explode into his arm in three spots to the bone. Dangers shits, put the guard on.
The timing of that "somethings about to go wrong" and seeing that thing donut once it was the correct way looks like the video has been sped up, absolutely crazy cant wait for more videos on this thing!!!
Only 3 days left for the ArcDroid and Everlast plasma giveaway! www.grindhardplumbingco.com
I placed an order last week and didn't get my full address. Is there a way to fix that?
I know somewhere try junk your digs and hit him up. Talk to him about his dirt track maybe.
Appeal for the challenge
If will ever tries to hide it again that's an extra 10
You guys should put studded tires on it and go rip with the CBoys and their shifter carts on the ice!
🎉
I love how you guys always do everything in the absolute safest way possible at all times.
Safety fast. That's what mom always used to say.
I just finished my 50cc 2 stroke pedal-tractor thing and im super hyped about it, I started the build some time ago when i got inspiration from you guys and the grazy builds that grindhard has made.I wanted to tell this because i felt that grindhard was the reason that bringed me joy and hope while building that not so powerful,not so fast,not so grazy, but SO fun thing
+ it drifts good when power falls from the skies
hope you read this!
-Aapo 13 years old from Finland
I hope they read it too.
I wish you the best of luck.
Relate to your greatness and not to your weakness.
Much ❤ Love
🌎🌏🌍☯️⚡️
World✌️Peace
From New York State
You should totally start making videos on that beast of yours. I think people would love it! also raycar is def a bot
yeah i have been thinking about that!@@davidtucker1155
@@davidtucker1155 thanks 🫏
Pedal tractor like the childrens toy? That sounds amazing! Doesn't have to be fast to be cool, man. That sounds awesome, honestly! And I'm 32 😂 props to you for taking initiative, and jumping in and doing it, it takes guts, motivation, patience and perseverance, good on you, keep it up!
Much love from the US, hope the fellas see your comment 😎
Im big into large scale rc cars and absolutely love this. Ive considered useing one of my 5th scale rc motors with 20hp to power a small go-cart for me and my kids. This motor looks stupid powerful.
Guys! When you want to reverse the direction, you need to change two phase wires and two wires of the hall sensors if you want to do it the "long" way. The short way is to reprogram the controller (as you mentioned), changing the correct setting (indicated on the programming software) will make the motor spin the other way. Trust me, I've done it both ways.
surely the company they contacted suggested that first
@@rendaddy_ Just the way 3 phase motor works, that would be the solution. The fact that they didn't suggest it means that they didn't know or didn't want any mixed wires. All they will do is connect the controller to a computer and program it the correct direction. All my cheap controllers can work by switching the wires and my decent ones can very easily be programmed via adapter and USB cable. This is universal.
@@esqueue I'm guessing it's a liability thing. It's far safer to say send the controller back, that minimises the risk of damaging hardware and having other people see the video and hot wiring their own motors.
I know this was driving me NUTS!! I'm here wondering where's Ethan to tell them to reverse ANY two phase wires and BOOM problem fixed!
Shhhh I think he was just being lazy, he even says “I do electrics” lol. Or it’s part of the sponsorship? Just another way to name drop the company? Bad Ethen bad!
Loving seeing Edwin back in front of the camera AND doing projects, LOOOVE it, cannot wait for the drag face!!!
I feel like Ethan could just feel his insurance premiums going up.
Not a Premium thing!
Right? Will- “ I have a fear of these” as he’s using it without a guard or face shield 😂
Lol not how business insurance works.
“Premium!”
There are "Insurance Premiums" and then there is "Premium Insurance"!! 🤣😂
This is the first time I watch a video for you folks and after like 5 minutes I knew I landed on the right spot... What you do is exactly what I dreamed of doing but never really did
This group of awesome people helped bring back that dream i had growing up. I started a little side hustle with a Decent name I'll share once its legally mine lol. I started buying project ATV's and mini bike go/street-karts and started on the first custom build. Sometimes you lose sight of your dreams but it's a nice feeling to be reminded and its amazing how well its working out. So thank you guys for reminding me to focus on what makes me happy.
dido
Amen
Love how happy Edwin looks building , hes having a blast
Ethan's poor shop😂 been waiting for this episode ever since I listened to the podcast
I’ve watched all your videos for several year and they’re great. All the bills are y’all do are ridiculous. I live in the south so snow is not available lol y’all do a great job on building random build keep it up guys 👍🏼
GHPC is the Mad-Max backyard version of tony stark and I’m here for it!!
when i was younger i would build things out of nothing and it worked. i love to see yall make such fun creations out of scraps from other builds. This is so much fun.
The best thing about these little builds is how approachable they seem. Like a motorcycle engine might be cheap and easy to obtain, but it's so friggin' heavy compared to a small electric motor and battery you could almost slap on anything with wheels in a couple of days and get obscene speeds. (well, assuming your motor controller isn't the wrong way around... Also: Edited for typos I didn't notice originally...)
I wonder how much the motor and battery weighs compared to the 2-stroke engine a fuel tank. For something this small there probably isn’t much difference
@@AussieDaz87I'd imagine the weight of this electric setup is probably really close to like 125 or 250 2 stroke engine with the flywheel/stator attached (45-55lbs). However, the torque that this electric motor can instantaneously produce makes the beefy powerband of a 2 stroke feel like a 49cc gas engine in comparison. Seriously, anyone who rides bikes or karts owes it to themselves to try out a comparable electric powered setup. The G's you'll pull with good traction will blow your mind.
@@AussieDaz87honestly power to weight is probably better with a little 2 stroke but the torque on anything electric is so damn fun
This is the coolest make it electric from scratch channel I've seen, U-Tube needs to introduce these guys to Edison diesel electric company. a match made in heaven.. thanks for lifting my spirits...
This video could not have come at a better time! A good friend of mine has decided he wants a go-kart track in his backyard. It will have some elevation changes and cambered turns, etc. It should be epic! but we can't use gas carts because of the noise (friggin neighbors!) I suggested finding rough/retired shifter karts and put in electric motors. I don't think he fully got the concept. I'm definitely sending him this video. This thing you're building is overkill, but it's the right idea.
I actually have the same project at home and i was able to change the direction of rotation by swapping the motor cables. Don't give up!
Do you think you could break down the parts your using? i really want to do something like this!
@@eliangreatrick6620 sure. I purchased 4kw / 14kw peak bldc motor kit. It's 72v nominal 200A peak. It was designed for motorcycle conversions but it can be used for go kart. All I had to do was to purchase a 0-5v throttle. The hardest part was to make the motor mount. I don't have CAD plasma cutter like these guys lol. Battery was easy for me. I am using LFP Headway 38120HP cells 24s2p pack. Let me know if you need help.
Ethan is like the proud but also somewhat annoyed Dad in the shop.
I love the chaotic energy will brings I did not at times in the beginning but he makes Ethan look like the red Forman of the group now
Watching the first half of this and just thinking, "Wonder when Ethan is going to see these guys..." *midway through* "WILL! That's a $6000 garage door!"
"Okay dad I won't break it!" -Will :)
I don't blame Ethan one bit. He worked hard on that shop.
Definitely dad mode 😂
I like how you guys unlike most people keep the garage area pretty clean and organized. seems like a nice environment to work 🤙
Well it was...😂
"I FEEL LIKE SOMETHING BAD IS ABOUT TO HAPPEN" 😂😂😂
What's bad is he didn't even get that fully out of his mouth before that thing slammed in reverse and took him out the door
That timing was PREMIUM... fr, i died.
He should honestly be glad his arm didn't catch in the rear axle, wouldn't mangled him bad.. Utterly reckless.
@@NoTraceFound Needs full phone armour...
Guys I swear this is definitely one of your best ones I can't believe you've been sat there for that
It's good to see Will doing more work on the projects.
Pulling him behind that six-wheel drive on the gocart without a helmet was a brave choice i know rocks getting kicked up from the tow vehicle are traveling fast enough to kill a person if one decided to hit the person being towed in the gocart in the right spot. Id probably have done that exact same thing but sometimes thinking about what could happen is worth the time
Haha, just 2 minutes into the video and Will is trusting the tailgate on the K-truck with his life. 😅Love what you guys do 👍
Not only do we need a Will Pushup Counter for each video, it would be Premium to have a Supercut of all Will's pushups over this past year!
A Will Push-up Counter is brilliant.
I'm a new viewer. What's the pushup thing about?
Edit: Oh, it's the phone in the back pocket!
Honestly, it's just total clown shoes every time Ethan is out of frame. 😂
Truth and I love the "chaos" some may call it. Some sweet content comes from Ethan's away times as well. Love when the guys cut loose lol
i didn't expect to enjoy the shot of donuts around ethan on his laptop that much. quality stuff guys.
Great video! We did a super similar build on our channel! We would love to talk with you about supplying batteries for builds like these.
I hope Ethan sees this comment.
@@jakeparker-wv4mwMe too! We would love to work with them! I have a company that distributes Second Life EV batteries at ~50% the cost of market. We can really help this community and want the Grind Hard guys to be able to push their electric builds further!!
You might consider putting a return spring on the sensor side of the throttle cable. Or at least make sure you have a good kill switch (maybe a lanyard style) I found have that out the hard way. Haha😅
I was thinking just the same, looks like great minds think alike
It’s so funny to watch how excited Will and Edwin when they get excited about a project!! It’s like watching two little kids that just figured how to bypass the governor on a Briggs, but amplified to 10!!
Meanwhile Ethan is “don’t break my door” Ethan is growing up 😮😂😂
the editing on those indoor donuts was great🙂
Hey you mentioned local places to drag race. You can't race a car at this local event but, Old Town, Idaho has an annual motorcycle event called Run Watcha Brung in July and you basically drag race almost ANYTHING. I go every year and my job helps sponsor the event, I'd love to see you guys out their!
The tow job at the start was the most gen X stuff I've seen for a long time. Congrats guys, it's renewed my faith in your generation to have fun and do it right
put on studded tires and ride on a frozen lake, I think this will be what you need
This has to one of the best PREMIUM shows on TH-cam!
Will: “I have a fear about these blades”
Also Will: *proceeds to used grinder without a guard 😂
Hope the giveaway is open to international entries, couldn’t find anything that said otherwise and bought a few things!
Your fear of the cutoff wheels on the angle grinder is very very valid. You should ALWAYS have the guard installed on the grinder! If you, for what ever reason, can't do that then wear a full face shield/welding helmet.
You guys had me laughing so hard I had tears in my eyes you guys killed it.
The classical music was on point! 😂 nothing like a beautiful burnout ballet.
Will you ever allow a fan enjoy one of your “crafts” as like a prize of a special Rafael?
I remember waaaaaaaaaaaaaaaayy back when you first built that Barbie Jeep! An now look at ya giving away something we all need in our shop: a plasma cutter for free! Lets Go Grind Hard!💯💪🏽💯 You the real MVP! I want to see more of this build!💯
That thing looks epic! Another great vid!
These guys are just so sick. This channel never gets old
I suppose the instant torque of electric motors does have some downsides. Thing was like an on/off switch.
I thought for sure Ethan would open the garage door after being concerned about Will hitting it. Luckily it remained intact.
Thats just the controller. They are usially really controllable
@@MADEINNSW The level of control they appear to have, the power curve isn't set correctly. It seems nearly an all or nothing response, with not enough ease-in. It's either that or they have such a lead foot they don't know how to ease in on it. Heavier spring on the throttle pedal may not hurt either.
That really is some premium dirtbagging amongst genuinely decent friends taking place right there at or around the 6:39 mark - special callout to checkout the action at the 6:46 mark cuz if you pause it just right, you'll see legit proof that they all actually really do love each other so very much and hanging out and being around each other. Simply just a sight to see and one of the reasons I root for these boys right here!
Pro Karting driver here, if yall ever track that kart or do some fun street stuff, I recommend trying to get Mojo D5 kart tires if you have a 7 inch rear rim, or Vega Blue tires for 6 inch rims. It might be very tricky getting a hold of these tires as they are used for professional karting and they are pricey, but trust me, for a kart with that much power it would give it good grip
I have watched a ton of GHP videos and this one made me shake my head and second guessing my desire to watch more. Hey let's crash into everything in site. Then keep going and do it again
This might’ve been the sketchiest video yet
How is a video sketch
@@politicalgarbagewaterbruh💀😂.
Things can be sketchy while not actually being a scetch
26:33 It's so powerful that the way it moves doesn't even look real, incredible build!
Lmao I lost it when he called Will out for having two phones in his back pocket after escaping death 🤣
This video is my first introduction to this channel, and I think I found out what my daydreams actually look like
Please please please do an urban takeover sort of video with this thing. Probably too late now with winter finally here, but go rip around downtown Sandpoint at 2 am on a Tuesday night and get some good clips of it. Different style video that everyone here would love.
Well that section of the new shop floor is probably forever waterproofed
Awesome video
There are ways to do wild stuff, but from dragging it with the truck to all the nonsense in reverse could have gone bad. Ain't hard to wear a helmet, at least for the younger kids watching and copying their fav youtubers etc. keep up the wild videos, but think about whos watching your content and the influence you have on helmets in general bros.
Man they just grown up kids doin what they wanna do. If they get hurt let em have it but don’t go hurt n urself because something they chose to do.
It's cool to see Will taking on more projects. It's also cool to see you guys doing stuff with electrics. Speed and power don't care about their source!
I can’t believe that I’m just finding this channel😂😂😂😂. Loving it already
The timing on him saying "I feel like something bad is a out to happen" was damn near omniscient, poor guy was having the absolute wildest groundhog day
LOL I love that mini pickup. You guys are such fun to watch
Yall are probably the most unsafe group on TH-cam. I love it🤣🤣.
Probably need to consider some sort of roll bar tho.
Safety 3rd
Ethan's "WILL!" is like Hank's "WALT!"
Everything that Will built is officially Grind Hard fast it’s premium 😊
Dream job. Dream shop. Dream land. You guys seem to be living your best lives. We love what you do, so keep on keeping on. Peace out
Drag tracks normally love seeing one of stuff like that. Both ive been to with my shifter kart didnt have a problem with it at all.
You need F1 driftkart merch, this is awesome.
You know it does good donuts when the inside front wheel spins backwards... Haha!
It's nice to see another youtube channel taking OSHA as seriously is it needs to be.
This is my new favorite way of putting grip down on a slippery shop floor.
Love the shot of the firetruck 😎
you need to bring this to the cboys PRONTO they would love this thing and im sure have a spot for you boys
You guys are pure Gen-X material !!! Hats- off
"I feel like something bad is about to happen." Perfect!
The reverse of the motor can absolutely be done, you just need to swap the phase wires AND do the same on the hall sensor cable.
lol the rocks peppering the go kart in back was hilarious. love the cut from “we wont go that fast” to screaming
Congratulations first ever video to make me feel sick from dizziness
You guys are so close to 2 million!
6:41 Will... It is one of the reasons I like this channel and this alone would make a great drinking game. Randomly add some videos to a playlist and grab a bottle and a few friends.
I really like the classical music!! Also, I actually get scared watching Will drive that on that dirt road!
So I have a fear about these blades... "You should." Literally the most correct response 💯
Man you guys were wild on this one😂 glad the new shop, and you guys are still standing!
Brave man riding in the kart with Will driving.
I never comment on youtube vids but... that bail of Wills had me in stitches 😂
Saturday morning in bed watching the grind hard boys do what they do best 😊
I never knew plumbing could be so much fun!
The Epitome of "Having Crazy Fun"
this is true content creation, going absolutely crazy doing stupid shit with limited safety is the best
We need a build guide for this double motor on somthing like a old Honda atv would b super handy and useable even fully submersible and wouldn’t ever drown out
I like how Full Send Ethan has become the voice of reason at GHP.
The electric acceleration rush is exactly why I started ScooterFaster back in 2003.
There is nothing quite like dumping 400 Amps into a vehicle that weighs less than 400 lbs.
Rider included.
That being said, EXTREME CAUTION should be used during the wiring and testing phases.
Your throttle sticking WFO could have ended badly. ALWAYS BLOCK THE DRIVE WHEELS UP AND TEST THOROUGHLY.
We used to run in a massive carpet mill parking lot with NOTHING to crash into. Closed on the weekends just for us. Search for a big parking lot and don't stop for rain...wet days are drift days and the tires will last more than 2 hours which is all you get when it hooks up.
And this is what we call a prime example of why women live longer than men!! Great content guys!!
Boys, frozen creek with studded tires!!! That thing would be nuts on ice!!!