I always love the colour of primers. That matte look, I normally work with black/grey primers and sometimes I think it looks better than the base coat.
Always liked how donut inlcudes bts stuff of their off-screen staff, shows theyre proud of everyone on this adventure! also, could we get an up to speed on donut itself? or an AMA :D?
@Michael Kushma Still sucks though. I saw a couple clips of color application where he was still way too close. My opinion is: He’s lucky it turned out as well as it did.
@@SARDOG LOL! Titanic ship designer trying to stop flooding. because he himself, single-handedly invented and owned the whole plasti dip industry and is the sole person on this galaxy who knows how to plasti dip right?
@Oscar B yeah judging from Barts Instagram, I take it he had a child and so put 2 and 2 together. He most likely wanted to focus more on his family than work. I doubt a story where Bart and James or Donut Media themselves had a falling out.
@@CameronThatcher I saw a random comment on a science garage video saying he got suspended/fired while on paternity leave. I'm hoping that's just speculation though. There doesn't seem to be any bad blood.
I'm thinking he had more to say there but they just cut it before he got to it. Like "distance doesn't matter as much as consistency" or something like that.
10:20 hit the nail on the head right there. I first time plasti-dipped my Corolla just to see what it was like and used this philosophy. It took me like 10 coats because I was going super light, but it came out even with no drips. Also, a benefit I had in doing those light coats was by the time I finished one side the other was dry and ready for the next coat.
Yes they do change out their lights along with other cosmetic changes, if you wanna see all of HiLow season two check facebook, they’ve all been posted already
@@lucianalombardi1055 tbh I felt the same way but he's not wrong, saying stay 8 inches away from the car is easy but actually consistently staying 8 inches away from the car is fairly difficult. What he meant was find that zone where you can comfortably spray while getting the results you want.
@@Some-day125 also notice how the boys did the back of the car. they stood on one side and didn't match the angle of the trunk. a pro would actually always walk with the spray gun so the angle is always 90 degrees to the car.
It's not that he's always like "yeah, it's ok, it turned out fine" It's more that he's like "How do 'We' fix this?" He knows there's an issue and will help you out through it. In the first try, he even told Nolan that they would share the failure. That's what makes Aaron a good guy. Cute too.
I tried dipping my car for my channel after having it previously dipped professionally and my gun had the same issue. Pickup tube was cracked and had the same issues. Dip looks good when done correctly but things can go wrong fast
You mean if something is not done correctly he will turn out like shit? Like how Nolan admitted he did a shitty job and it had nothing to do with the concept of plasti dip?
Wouldn't you be stressed out knowing tha because off your, lets call it mistake, you are ruining someone's business and you know that it was your fault and the product might occur to be real good.
LuizAbruz ,I wouldn’t say the color looks awful. but it doesn’t really look right on that car. It’s something I’d put on an older car, like an old fairlady, a Porsche, or even a truck.(Keep in mind this comment is from a 15-year-old that plays video games 😂)
“I need you to re dip the car you are making the industry look bad.” Here’s some high quality professional products from best name brand so you do it correctly Spray gun is defective out of the box Oof
2:27* Rotate the can 180° and pour with the opening on top. Allows air in for a smoother pour. Plus your not having to hold the entire weight of the jug over the spout. Lower center of gravity etc... Works with oil jugs etc. as well.
Small tip for pouring from a rectangle jug, put the spout on the far end when you pour so it doesn't spill everywhere. The problem is the liquid and air are trying to swap spaces so when. You pour from the bottom the air has to go through the liquid and it "blubs" and spills everywhere.
We all made low-car on Need for Speed and afterwards thought: ''I made a hideously overtuned monster and I love it''. Damn, I miss when NFS had sliders so you could make the vents exactly how you wanted them.
@@leansnscenes7806 thats because newer game designers only care about maximizing profit over replayability. If you're playing old games more than buying new ones, they lose out on money and greedy publishers don't want that.
nfs went to shit by over simplifying performance mods and removing tuning and gear ratios also I kind of lost the start low and work your way up aspect
Just to be sure, english is not my first language, by stock you mean factory original, right? (If this is not what you meant, than disconsider my comment below) Nice idea, but the stock car, if don't have any "nasty surprises", will always be better. Is much easear do what you want with a Stock car than have to undo someone else mods; and some mods can be a nightmare to undo. From experience, I would purchase with no doubts on my mind a 40k 'stock' car over a modded 40k car. In terms of performance on the track, I think the awnser is very easy to guess; stock will lose.
Thank y'all for being so honest with this. I always watch these car vids and everyone has been doing this so long they make it look easy but y'all are doing it for real the way the DIY-er would be doing it and that's real
I would love one but he works with odi on his drift car and the other guys drift cars and maybe still with mad mike and now I think he’s a pro drifter too...he’s doing a lot
I loved the little look "behind the scenes" of how the footage of the cars was shot. The videos you guys make always have stellar production value, keep it up!
haha yeah, used to do the same at the world solar race in australia, same method, although my safety gear was a bit more improvised :P but yeah, if you want to shoot footage of a car driving, get a cam car with sliding doors.
This is not a show it is day to day content; vlogging through multiple feeds: a comp of episodes done by a group of friends, not TV fallacy, they are living it:"@real life."
It really says a lor about a company when the owner is willing to offer their services to help someone do the job right. Hats off to Fonzie for handling it well and same to these guys for admitting mistakes and giving it another chance. Subscribed now.👍
The dip is pretty awesome. Just make sure your equipment is in good working order and get the spraying distance right. It would likely help a lot to at least have a portable spray booth.
@@williamkline6450 thats not the point, the points its to make a good car with as little money as possible and then compare it to a lotta money car, and that shit looks horrible, they could have made a better job
@@r32juan Did you see the vid of them installing it? They had a lot of trouble because it didnt come with mounting holes and they were rushed, the whole point was to showcase the difference you get, which includes ease of installation.
I actually really enjoy this show, I recently got a car and wanted to get into car culture. It seemed really expensive at first and impossible to get into on a lower budget, but these videos help prove that otherwise. Keep it up!
I started tuning my Fiesta ST and got some second hand parts like a intercooler and used x37 turbo. You can save a lot of money by using second hand parts. You just need to look around a little more.
@@ismail10_02 Thanks! I got a G35 Coupe and wanted to get into some parts like an exhaust, lowering the suspension/camber, and new headlights . Then moving on to cool air intake and body kit for air flow. Once aesthetically pleasing I was gonna do things like inter cooler or even a small turbo if the engine bay had room. Thanks for the help tho, new parts looked kind of expensive at first from big name websites.
Nolan definitely "redipped" himself! About 10 years ago, some friends and I opened up a business to sell auto parts, perform auto detailing, and also Plastidip entire vehicles, wheels, individual body parts, etc. The dipping side of the business was at first very strenuous, we were spending a lot of time trying to find the right guns to spray with, what techniques worked best and how much actual dip it took to do a legitimate wrap job! DipYourCars full car kit would barely get you through half a car before needing to clean out the provided gun with the remover(did not go very far), it was not cost effective and we were just flying through funds from buying so much materials to keep guns clean. We finally got a profitable process going, and we were charging customers a little more than the DIY kits. and we did about a dozen REALLY awesome looking Dipped cars. If you can get a solid process down then it is fun and easy to do and your car could come out looking great! Thanks for doing a Part 2 Donut! Avid fan of the page anda huge supporter! If you guys are looking for another host... I'm available 😉😁
@@thatmiatadude3997 I have a mini cooper, trying to decide right now if I'm going to wrap it or dip it. It's already a really small car, and I'd only be covering the bottom half, since the top half is almost all glass. I probably could do it for around $300
HiCar is the son that got the best things when they came out, LowCar is the younger brother that got the hand-me-downs but made use of them as he could.
@Mobile Games some people just aren’t really good at certain things. If I gave you instructions on how to knit a sweater, how good would you be? I expect you to do a professional job and no less. Let me guess, the moment you started driving stick shift, you were a drift god from the jump? Lol
Yea I used a high quality 3M matte black wrap on my hood because the paint was fucked and I wanted to try the wrap. Looked cool for a long time but I got lazy and left it on for like 7 years.... my god was it hard to pull that shit off
@DJ Coin Laundry It's cause studded tires kick up a lot of small fragments on dry roads or whatnot, (which is why they're only legal in places you often can't get by without them.)
I like how the plasti-dip guru was all like, "The distance doesn't really matter." And then proceeds to say you can't be too far away or too close. Sounds like it certainly matters 😂
@@estebanod idk why you feel that way. I paint as a hobby and do commision work from time to time. Distance and how fast you wave the paint over the surface certainly matters. Spraying the paint too close it will pool and drip. Too far away, the paint dries before it makes contact causing a frosting/rough textured surface. You should always test paints you're not familiar with to figure out the proper distance and speed you need for it to lay smooth.
I wouldve loved to see the “HI” z be a bright yellow orange to correlate with the whole Hi:Low logos they have going on. Since the Low is blue and so is its correlating z. Just sayin...
Thats awesome you guys communicated with Fonzi and got the job done correctly. Not only you instilled integrity back into your plasti dip video by accepting user error..lol, but showed how communication solves problems even if its cheap. Im getting the hyper titanium from dipmycar. I think i like the cheap car more.
I agree. I think just cleaning up the paint they have and letting the contrast between the brr brr freezy polar white and the dark as the night carbon fiber is a good combo.
Not always, some of the dip colours aren't my taste. But others really are, if you don't want a glossy finish I see no point in spending the extra money.
@Adam Courchaine I know but they aren't super user friendly if I remember correctly. Or has that changed since I checked? If the full gloss is doable that would be even better.
@@nuuwnhuus easy as the colour coats now. Used to be a lot of xylene thinner to make the clear flow out, hence easily run. But now the film levels itself much more without the additional thinner
What? Why? That teal looks really good. Matches the car. Fun and flamboyant. Dont take this sort of stuff so seriously! *retreats back to his ash grey Touareg*
Gabriel Hunter I know exactly what he was referring to and I responded accordingly..plasti dip as a fad is dying out so the fact that Nolan advertised the product at all definitely helped fonzie out and if anything he owed donut a big thank you 🤷🏽♂️
I was just referencing what James said around the 1:10 mark that "Nolan did such a bad job he put an entire industry in jeopardy." Edit: I guess my original comment should have been industry instead of business.
As someone who doesn't spray cars, but does model kits, the secret to a good coat is the same no matter what you're working on. MULTIPLE LAYERS OF LIGHT COATS In any case, HOT DAMN does the car look good. Excellent work!
@@vincentchiu999 They used the wrong dip. The method they used was the old way when people thinned dip with paint thinner cuz of course it was meant for stuff like tool handles and they used an old paint sprayer. The new PDS is specially formulated for spraying cars and the subsequent sprayer also.
I'll miss the terrible coat, as it really gave it that low budget look that it was worked around, and imperfections have character, but I'm glad you got the Z to look more refined, and making a really cheap everyday track car seem like a decent option.
I didn’t realize how bad the first dip was until now seeing the redo
*boi*
1.5K likes wow nice
me to actually
How
tbh i like the stock paint rather than the blue looks kinda icky
“At least we’re starting off on the right foot” was glossed over way too quickly that was gold
Ya haha pretty funny. I started a channel where I take trucks up into the bush and wreck em. Hoping to make a few people laugh.
glossed over my head
Lmao, he saw your comment m.th-cam.com/video/Tr_pPO0QuXM/w-d-xo.html
Bush Truck Sounds awesome! Ever have to abondon trucks?
@Fuert Neigt he dumped it on his right foot
The low car looks way better than before. Looks like a professional paint job.
True, holy crap
It’s looks actually really good
I always love the colour of primers. That matte look, I normally work with black/grey primers and sometimes I think it looks better than the base coat.
same this is amazing
Plasti dip works you just have to be patient like a real paint job. Definitely takes practice
it looks really good in that teal. feel like it would have looked even better if they picked a safer color. damn. $500.
Who would win:
A million dollar industry built around painting cars
Or
One unskilled boi
One drippi boi
Lol
the boi, there's no chance someone even gets CLOSE, no 🧢
@@notanoption1793 no hat?
Unskilled boy it’s so 🧢 if a million dollar company wins
Donut has the power to ruin the reputation of an entire industry.
How does this not have more likes?
@@psedog bruh this video came out less than an hour ago, calm down💀
Salvador Vazquez hate comments like his
MO PAWAH BAYBEEE
@@lynpendry lol
Always liked how donut inlcudes bts stuff of their off-screen staff, shows theyre proud of everyone on this adventure! also, could we get an up to speed on donut itself? or an AMA :D?
Nolan just really sucks at painting.
2 Mins later:
Wow that looks fantastic!
@Michael Kushma Still sucks though. I saw a couple clips of color application where he was still way too close. My opinion is: He’s lucky it turned out as well as it did.
Stop talking kak bru
@@JpOcDenver
Isn't this like his second time painting? Give him a break.
No skills mate just luck
did nolan suck at drinking milk out of a glass too???
14:28 “You ever seen a harder pair of Z’s?” “We built these things!” that’s the dream
This was a great episode
*B Is For Build enters the chat*
Zzzzzzzzzzzzzzzzzzzzz zzzzzzzzzzzzzz zzzzzzzzzzzzzzz
SMUTS!!!
Thats the dream 🥺❤️
I love the fact that Fonzie saw the original video and offered to help
"Offered to help" 😅😅😅 More like the ship designer down in the Titanic's hold trying to stop the flooding.
@@SARDOG LOL! Titanic ship designer trying to stop flooding. because he himself, single-handedly invented and owned the whole plasti dip industry and is the sole person on this galaxy who knows how to plasti dip right?
Fonzie is the shit
It’s called promotion. He got his product reviewed by high traffic channels.
He had to help lmao
Bring back “Science Garage “ that guy made it so easy to learn as a new guy just getting into the car scene!
@Oscar B what happened??
Irvin Herman he works for motortrend now
it was my favorite thing to watch after school lol
@Oscar B yeah judging from Barts Instagram, I take it he had a child and so put 2 and 2 together. He most likely wanted to focus more on his family than work. I doubt a story where Bart and James or Donut Media themselves had a falling out.
@@CameronThatcher I saw a random comment on a science garage video saying he got suspended/fired while on paternity leave. I'm hoping that's just speculation though. There doesn't seem to be any bad blood.
“The distance doesn’t matter ....but u can’t be too close or to far”
confidence inspiring...
right ? So the correct distance is important lol
I'm thinking he had more to say there but they just cut it before he got to it. Like "distance doesn't matter as much as consistency" or something like that.
It's less important than when you lay permanent paint.
He's saying you don't need to be exactly 6 inches away, or no less than x distance. He's just saying to hold it at a reasonable distance.
10:20 hit the nail on the head right there. I first time plasti-dipped my Corolla just to see what it was like and used this philosophy. It took me like 10 coats because I was going super light, but it came out even with no drips. Also, a benefit I had in doing those light coats was by the time I finished one side the other was dry and ready for the next coat.
I have before and after photos if you wanna see them.
Post a link to the photos! :D
@@whatchyagonnado fr
why go through the trouble for a corolla unless you swap the engine, suspension, interior, and every other part?
@@will.green. I learned a lot and didn't have to worry about how it actually came out because it was a Corolla.
Really love this show. Its like the avengers of donut media, everyone is here
Well said.
I love this comment lol
Are you going to do a head light episode because low car’s lights look pretty bad.
was looking for that comment.
Ys..it's coming...the add undeglow neons too
Yes they do change out their lights along with other cosmetic changes, if you wanna see all of HiLow season two check facebook, they’ve all been posted already
Yessss
@@athulskumar9361 It's 2020, it's LED life man.
"You know, distance really doesn't matter. It's really just about making sure you're not too far, and not too close"
.... THANK YOU, OH WISE ONE.
Yeah, that wasn’t helpful at all 😒
@@lucianalombardi1055 tbh I felt the same way but he's not wrong, saying stay 8 inches away from the car is easy but actually consistently staying 8 inches away from the car is fairly difficult. What he meant was find that zone where you can comfortably spray while getting the results you want.
Triggered couldn’t have said it better 👌
I think it’s because there isn’t a magical number. It’s whatever you are comfortable with and can keep consistent.
@@Some-day125 also notice how the boys did the back of the car. they stood on one side and didn't match the angle of the trunk. a pro would actually always walk with the spray gun so the angle is always 90 degrees to the car.
Aaron is the friend we all need, so supportive and positive even though you did a shitty job LOL
It's not that he's always like "yeah, it's ok, it turned out fine"
It's more that he's like "How do 'We' fix this?"
He knows there's an issue and will help you out through it. In the first try, he even told Nolan that they would share the failure.
That's what makes Aaron a good guy.
Cute too.
Ya, Aaron is awesome
DOLME!!!!
yes i agree
James was a lot nicer to them this time around. Still want him to go onto a low car project for the next car! :p
I think its more respectable as he wouldnt want to make Nolan feel down and ruined the spray again
He wouldn't keep up 🤣
ذ١
#⬇️
Do a D-list on members of donut media.
The hustle, he’s back
Yes
please donut
YESS!!!
I WANT TO KNOW BETTER!
I would appreciate an Up To Speed, a D-list would make it seem biased and probably hurt their sentiments
I tried dipping my car for my channel after having it previously dipped professionally and my gun had the same issue. Pickup tube was cracked and had the same issues. Dip looks good when done correctly but things can go wrong fast
Drew peacock, when we gonna see some work under the hood on that Supra
Nvm I just haven’t checked up with you in a while, I saw that you swapped it
But is low car rice or nice?
my man
You mean if something is not done correctly he will turn out like shit? Like how Nolan admitted he did a shitty job and it had nothing to do with the concept of plasti dip?
nolan looks so stressed about getting the plasti dip right in this episode it hurts me
Fonzie probably threatened them
PUNDARE!!!!!
Wouldn't you be stressed out knowing tha because off your, lets call it mistake, you are ruining someone's business and you know that it was your fault and the product might occur to be real good.
The pressure was on, but that's how diamonds are formed.
"if you showed me that thing when I was 15, I'd lose it"
is basically the moral of this entire Z car saga lol
Almost every japanese car actually
LuizAbruz ,I wouldn’t say the color looks awful. but it doesn’t really look right on that car. It’s something I’d put on an older car, like an old fairlady, a Porsche, or even a truck.(Keep in mind this comment is from a 15-year-old that plays video games 😂)
LuizAbruz Haha, go look for Chameleon Plasti Dip ;p
Change ur pfp weirdo
its not even a good kind of cyan.
“I need you to re dip the car you are making the industry look bad.”
Here’s some high quality professional products from best name brand so you do it correctly
Spray gun is defective out of the box
Oof
To be fair, it could have been a shipping issue.
@@ralphlongo1975 true
damaged/faulty items are unfortunatly unavoidable. Real test would be how good DYCs customer service is and I hear is pretty good.
O O 0 0 o o F
The real question is: would your regular DIY champ be able to troubleshoot the splatter issue before burning through better part of a plastidip can?
"Have you ever seen a harder pair of Z's?" - "we built these things!"
I would be as proud too :D
I mean... Lowtek and Freshkicks some of the baddest Z’s but these are still badass in their own right
shut up bot
Huge respect for the whole team for trying and learning the whole process, just to make it perfect. Totally worth it, looks really awesome!!!
Title: PAINTING OUR CARS
Me: RIP Nolan’s mental health.
what it says 500 plasti dip vs 2500 vinyl wrap
Mostafa Walid You get the point. Just trying to make it easier to read.
Alopee 4 I love cars
350 likes *perfect*
🐏🐐
“if you showed me this car when i was 15” is a bit backhand but very true 😂
2:27*
Rotate the can 180° and pour with the opening on top.
Allows air in for a smoother pour.
Plus your not having to hold the entire weight of the jug over the spout. Lower center of gravity etc... Works with oil jugs etc. as well.
Yeah. We learn this trick the first time we look at the diagram on a quart of motor oil, and somehow our brains tell us it's wrong.
I was looking at this part cringing here. How do they not know how to pour liquid??
Or Punch a hole in the top across from the spout and it will get air that why too
ORANGE JUICE!
This is legit good advice for newbies.
Small tip for pouring from a rectangle jug, put the spout on the far end when you pour so it doesn't spill everywhere. The problem is the liquid and air are trying to swap spaces so when. You pour from the bottom the air has to go through the liquid and it "blubs" and spills everywhere.
We all made low-car on Need for Speed and afterwards thought: ''I made a hideously overtuned monster and I love it''.
Damn, I miss when NFS had sliders so you could make the vents exactly how you wanted them.
Yeah the older nfs games had so much customization, the newer games severely limit the players creativity
i loved old nfs games where i dint have to drive a drag car in a race tracks... (payback screw you and your stupid OP bots)
I miss Autosculpt
@@leansnscenes7806 thats because newer game designers only care about maximizing profit over replayability.
If you're playing old games more than buying new ones, they lose out on money and greedy publishers don't want that.
nfs went to shit by over simplifying performance mods and removing tuning and gear ratios also I kind of lost the start low and work your way up aspect
Need to test hi car against a stock “better” car and see if stock 40k car is better than a modded 40k car....
This needs more likes/attention
Jhymon Moodie Thank you, I wish I kept up with the series better, then I could’ve posted 6,000 comments ago...
Love this idea!
Just to be sure, english is not my first language, by stock you mean factory original, right? (If this is not what you meant, than disconsider my comment below)
Nice idea, but the stock car, if don't have any "nasty surprises", will always be better. Is much easear do what you want with a Stock car than have to undo someone else mods; and some mods can be a nightmare to undo. From experience, I would purchase with no doubts on my mind a 40k 'stock' car over a modded 40k car.
In terms of performance on the track, I think the awnser is very easy to guess; stock will lose.
Hi car vs Supra
“Distance doesn’t matter” proceeds to tell you about a distance that does matter.
length and distance always matter even when you get told they dont....
Girth is more important than length tbh
cant like cus 69 likes...
He meant there isn't an exact distance to spray from. You just don't want to be too close or too far away.
He made sense to me...
@@slowanddeliberate6893 Yeah, you can sent the gun up to spray 3 inches away or 8. There is no set distance. It's how you set the gun up.
Thank y'all for being so honest with this. I always watch these car vids and everyone has been doing this so long they make it look easy but y'all are doing it for real the way the DIY-er would be doing it and that's real
I love how Nolan gets more and more angry by each episode.
Yeah he was very angry when plasti dipping lol but I understand why
He's loving the blood of trying to get back at Hi Car
He needs more milk
Prob feels rushed by aaron. Seems like nolan wants to take his time and ask the professional...
@@sonicnyoom7283 nah, just the frustration
Finally I was worried that you wouldn't repaint the new parts
This video is months old lol. They finished the season over on their Facebook page.
@@SavvyMon4 wait really!?
ƛMƛƝ yeah lol. The series ended like 3 months ago on Facebook.
When is aaron getting his own show? Dude is great at driving and seems to know a lot.
I would love one but he works with odi on his drift car and the other guys drift cars and maybe still with mad mike and now I think he’s a pro drifter too...he’s doing a lot
I want to see Eddie get his own show. Guy seems really sharp.
I'd love to see some Aaron stunt driver shenanigans. He's a cool ass dude.
@@rentedguccimink1948 Aaron is on the Netflix show Hyperdrive
the thing is that Aaron is an actor and a stunt driver, I don't think he has time
I like how they went "TH-cam Like Button Blue" for the color of the car
Bro I just tried it, and it's fucking white
DRULE!!!!
@@khentai9015 idk what sadge is
@@callefalk4457 what is drule
I see what you did there
When they were dipping they edited like it was a life or death situation in a naked and afraid episode
I honestly felt like they did it on purpose. Just to kinda be tongue in cheek towards the big time reality TV shows
Bruh, that’s hella funny honestly
Lmao yeah that was funny
James: now it's time for more power baby
Me: he said the thing!
MO POWAH BABE !!!!
HELL YES
MO POWA BABEH
@@WlerickBigotOfficial testify
Bro u just copied me ....it's not cool
I loved the little look "behind the scenes" of how the footage of the cars was shot. The videos you guys make always have stellar production value, keep it up!
haha yeah, used to do the same at the world solar race in australia, same method, although my safety gear was a bit more improvised :P but yeah, if you want to shoot footage of a car driving, get a cam car with sliding doors.
Aaron is so cool. Chill and super supportive always.
"Now it's time to get mo powah" - chills, literal chills.
This show should be on Netflix tbh
This is not a show it is day to day content; vlogging through multiple feeds: a comp of episodes done by a group of friends, not TV fallacy, they are living it:"@real life."
Just be happy that you don't have to pay for it. I don't get this:"should be on Netflix/TV" - shit. Thanks
Hell nah then it would be scripted and changing the tone
It wouldn't be as natural as shown if was Netflix
Why? It's better here because it's completely free.
On this week’s episode of “Nolan Getting Mad as Hell”
My mind read that in Jeremy Clarkson’s voice
It really says a lor about a company when the owner is willing to offer their services to help someone do the job right. Hats off to Fonzie for handling it well and same to these guys for admitting mistakes and giving it another chance. Subscribed now.👍
Thank god you re-did it. Every time they showed a shot of low car my heart hurt.
I didn’t realize that’s how they filmed the cars on the road, I kinda just thought they stuck a camera out the window
There’s multiple ways to do it
@@CJ-gc6hy yeah my friends use their wagons strap their belts and hang from the car while they take roller shots xD
That’s what I thought as well!
Some people use drones too.
I thought they had a hatchback and shot it out of that but now that I think about it that wouldn't rlly work
The fact that Zack was like “we’re gonna make a Dexter room” makes him a goat in the car scene can I subscribe twice?
make a second account
Dexter has nothing to do with the car scene, though 🤷🏽♂️
Intercepting Fist yes it does because of all the plastic or whatever on the walls
So much more respect for this channel for doing a part 2 of this idea!
I think this was a great vid, Nolan definitely “redipped” himself and finally took a W on this show! Congrats man😂
I’m honestly in love with the Hi Low series
Nolan : *Destroys the companies reputation*
Company owner : Understandable, have a great day
Just joking btw, keep it up Nolan, great work this time
The dip is pretty awesome. Just make sure your equipment is in good working order and get the spraying distance right. It would likely help a lot to at least have a portable spray booth.
The fitment of the bumper on low car makes me cringe. LOOK AT THE WEELWELL
That's what you get with a duraflex bumper lol that brand isn't exactly known for quality fitment
That’s the point of low car
@@williamkline6450 thats not the point, the points its to make a good car with as little money as possible and then compare it to a lotta money car, and that shit looks horrible, they could have made a better job
@@r32juan Did you see the vid of them installing it? They had a lot of trouble because it didnt come with mounting holes and they were rushed, the whole point was to showcase the difference you get, which includes ease of installation.
You must not know about a little company called Duraflex.
I actually really enjoy this show, I recently got a car and wanted to get into car culture. It seemed really expensive at first and impossible to get into on a lower budget, but these videos help prove that otherwise. Keep it up!
Best of luck! (:
Okay lol
Taylor Meeks ?
I started tuning my Fiesta ST and got some second hand parts like a intercooler and used x37 turbo. You can save a lot of money by using second hand parts. You just need to look around a little more.
@@ismail10_02 Thanks! I got a G35 Coupe and wanted to get into some parts like an exhaust, lowering the suspension/camber, and new headlights . Then moving on to cool air intake and body kit for air flow. Once aesthetically pleasing I was gonna do things like inter cooler or even a small turbo if the engine bay had room. Thanks for the help tho, new parts looked kind of expensive at first from big name websites.
Even my mom would laugh at the first plasti dip job “She doesn’t even now any thing about cars”
Know*
@@jamesd4383 don't mess with him he's got a nife
ismail chammami knife*
i6oub - طوب you diden't get it
i6oub - طوب bruh
Nolan definitely "redipped" himself! About 10 years ago, some friends and I opened up a business to sell auto parts, perform auto detailing, and also Plastidip entire vehicles, wheels, individual body parts, etc. The dipping side of the business was at first very strenuous, we were spending a lot of time trying to find the right guns to spray with, what techniques worked best and how much actual dip it took to do a legitimate wrap job! DipYourCars full car kit would barely get you through half a car before needing to clean out the provided gun with the remover(did not go very far), it was not cost effective and we were just flying through funds from buying so much materials to keep guns clean. We finally got a profitable process going, and we were charging customers a little more than the DIY kits. and we did about a dozen REALLY awesome looking Dipped cars. If you can get a solid process down then it is fun and easy to do and your car could come out looking great! Thanks for doing a Part 2 Donut! Avid fan of the page anda huge supporter! If you guys are looking for another host... I'm available 😉😁
I like how everytime they list the brakes it shows the brakes on fire
They are so not professional, and that's what makes it great
How i wish i had a group of friends like this, Everyone jumping in and getting their hands dirty
I have my brother and he loves to sit back and criticize all my decisions while working on cars lol
they're getting paid so that helps everyone's enthusiasm
Chalino Corona SAAAAAAME
@@John_Lee_ no one wants to pay me a decent amount of money to get my hands dirty on cars. (joke alert)
Knux dirty
Aarons chill was such a good foil to Nolan's distressed energy when they worked together.
Haha “Were going to build a dexter room” very underrated comment. At 4:04
Your comment has one like and is at the top lol
Unge G haha that’s pretty funny, TH-cam problems
your comment above an comment with 2 k likes lmao
dont miss the "for ev ver!" sandlot reference
Fonzie's phone: *TH-cam recommends $500 plastidip vs $3000 vinyl wrap*
Fonzie: oh shit...
What vinyl is $300?
@@Tstatus73 I meant to put $3000, that's what the first video was called 😂 I'm gonna edit that
Tyler Branson if you do the work yourself, you could easily wrap a small car, like a Miata, with 3M wrap for around $300
@@thatmiatadude3997 I have a mini cooper, trying to decide right now if I'm going to wrap it or dip it. It's already a really small car, and I'd only be covering the bottom half, since the top half is almost all glass. I probably could do it for around $300
That Miata Dude I’ve wrapped my brz but it still cost me like 600. Though I got some cool colored wrap.
Petition to give Aaron his own show on donut
I'd like to see him on the track since he's a badass driver.
@@rentedguccimink1948 100% agree.
Yess @Donut media make it happen
I fully support you. MAKE. IT. HAPPEN. 💪🏻
Definitely, the most competent of the bunch
HiCar is the son that got the best things when they came out, LowCar is the younger brother that got the hand-me-downs but made use of them as he could.
“You get a lot of looks coming up here?”
“I get n o visibility in this thing”
Woooord
#low
"We're CLEANING IT...and we already look like colossal idiots." - Nolan, 2020
@Mobile Games
Can you please post a video to prove it? I just love numbskulls like you that talk mad shit but never deliver on it.
@Mobile Games some people just aren’t really good at certain things. If I gave you instructions on how to knit a sweater, how good would you be? I expect you to do a professional job and no less. Let me guess, the moment you started driving stick shift, you were a drift god from the jump? Lol
He doesn't know why the hole is off-center lmfao 🤣
PUNG!!!
Nolan def re”dipped” himself but I’d still go wrap
Tbate 02 true I just think wraps are way cleaner but I think they did a great job
@@xt7144 is your icon pic form the straight pipes when they reviewed the urus
but the "low" car looks so ugly
I'd definitely go for the wrap but I'll give the plastidip a try just for kicks
lovegirlforever.link/QFoiJkI6EVMq
I am so excited you guys Collabs with a dip your car I love Fonsi and his group over there.
Every single part of my soul, heart and wallet is with team low
Fonzi is the man, totally helped me get great results on some cheap winter wheels!
"lasts forever" aka 2 years in sunny environments.
Even less in weather extreme regions. When the best selling point of a finish is that it is easy to remove...
@@shawonr3325 4-5 years at best which is nowhere near as good as paint. A good paint job that's maintained will last the life of the car
Yea I used a high quality 3M matte black wrap on my hood because the paint was fucked and I wanted to try the wrap. Looked cool for a long time but I got lazy and left it on for like 7 years.... my god was it hard to pull that shit off
well i guess it gives u the option to change ur cars color every few years if u want?
@DJ Coin Laundry It's cause studded tires kick up a lot of small fragments on dry roads or whatnot, (which is why they're only legal in places you often can't get by without them.)
I like how the plasti-dip guru was all like, "The distance doesn't really matter." And then proceeds to say you can't be too far away or too close. Sounds like it certainly matters 😂
You're being pedantic
@@estebanod idk why you feel that way. I paint as a hobby and do commision work from time to time. Distance and how fast you wave the paint over the surface certainly matters. Spraying the paint too close it will pool and drip. Too far away, the paint dries before it makes contact causing a frosting/rough textured surface. You should always test paints you're not familiar with to figure out the proper distance and speed you need for it to lay smooth.
When you start to get emotionally attached to cars don’t even own
So business as usual lol
Same...
I wouldve loved to see the “HI” z be a bright yellow orange to correlate with the whole Hi:Low logos they have going on. Since the Low is blue and so is its correlating z. Just sayin...
Well the wheels are gold which is pretty similar.
This teal dip looks so good, I’m crying
Thats awesome you guys communicated with Fonzi and got the job done correctly. Not only you instilled integrity back into your plasti dip video by accepting user error..lol, but showed how communication solves problems even if its cheap. Im getting the hyper titanium from dipmycar. I think i like the cheap car more.
When y’all showed the camera guy at 14:43 I swear something bad was gonna happen because when do they ever focus on a camera guy that long lol
Same here! I thought he was gonna drop the camera or the harness was gonna fail and he would go flying out of the door.
Not to mention there was way too much slack in that rope connected to the harness
Nothing better than a donut episode on a Sunday afternoon!!😋
Its like 23.21 in asia man
Evening*
glue MASTER Sunday morning
it aint afternoon its nearly evening for me
@@TH3L3G3ND its night here
They need some sick headlights IMO 👀
Those make a world of a difference
I was about to mention that
There's not much variety when it comes to headlights for the Z
thelonestranger777 I have never looked into it before, but I bet they could find something. Probably even an expensive pair and cheap pair. 😂
@@dylanellis6264 I wish that were the case. If you ever find something, let us know!
This is literally my favorite show on any platform; hulu, netflix, cable...non of that has any shows better than this show. Keep killing it!
This might be an unpopular opinion but LowCar actually looks better without any dipping.
Nah I’ve been saying it looks so clean
I agree. I think just cleaning up the paint they have and letting the contrast between the brr brr freezy polar white and the dark as the night carbon fiber is a good combo.
Yes.
One without dipping is so satisfying 🤩 m.th-cam.com/video/Tr_pPO0QuXM/w-d-xo.html
it looks way better without anything but then again the series is to see which stuff is better for the price
Angry Nolan moments
2:27
9:16
9:52
Thank you GT40 mk 2
Doing God's work
Ur a good car
"we changed the colour guys, its completely different"
Me: oh wow, from light blue to slightly lighter blue
Should have done like purple
@@racingfreak1337 that would be sick
@@racingfreak1337 with white wheels ? /S
Racing Freak! High car is already purple
light blue to lit blue 🔥
The second dip really was an improvement. Giving Low car that justice it deserves!
I'm not picking sides, its more of a "what I can afford vs how it's supposed to be done" thing
Not always, some of the dip colours aren't my taste. But others really are, if you don't want a glossy finish I see no point in spending the extra money.
@Adam Courchaine I know but they aren't super user friendly if I remember correctly. Or has that changed since I checked? If the full gloss is doable that would be even better.
@@nuuwnhuus easy as the colour coats now. Used to be a lot of xylene thinner to make the clear flow out, hence easily run. But now the film levels itself much more without the additional thinner
@@pb6198 Ah nice, that's pretty sweet. Thanks for letting me know.
@@nuuwnhuus it's no paint, but it's evolved a lot. You can also use binder and add your own pigments to create any colour you can imagine
I thought, "Surely they'll choose a reasonable color this time."
What? Why? That teal looks really good. Matches the car. Fun and flamboyant.
Dont take this sort of stuff so seriously!
*retreats back to his ash grey Touareg*
ikr i thought the primer looked better than the teal lol
The POS front bumper cover ruins it for me.
@@hudsonh344 yeah, they picked a metalic color on the website but when it dried it looked matt
@@robertjusic9097 that's why you add a whole bunch of glitter
“Plastidip offers all the same benefits of vinyl wraps...”
Um, i have yet to see someone plastidip anime girls to their cars.
😂😂😂
You could get laser cut premade stencils and spray in a remove mask by number kind of idea but it would take ages
D D exactly what i was thinking, that would take a long time tho.
this is why I wanna wrap my car
Dr Stoner weeb
I actually liked the two tone (paint and aftermarket parts colors) :)
I love the 350z, just beautiful!
More like $500 in labor the first hour of dipping with that squadron
I love when I mess up so bad I almost destroy an entirely different business.
F a n t a s t i c
Realistically fonzie probably got MORE business
@@eriv4735 I think he was referring to the first time they tried Plasti Dip lol, that's probably the whole reason Fonzie contacted them to redo it
Gabriel Hunter I know exactly what he was referring to and I responded accordingly..plasti dip as a fad is dying out so the fact that Nolan advertised the product at all definitely helped fonzie out and if anything he owed donut a big thank you 🤷🏽♂️
I was just referencing what James said around the 1:10 mark that "Nolan did such a bad job he put an entire industry in jeopardy." Edit: I guess my original comment should have been industry instead of business.
Saw this in my feed and IMMEDIATELY and AUDIBLY said "whoa, hell yea!"
Good jobs guys.. Dope af as always 💯
For future reference, I think the word you're looking for is "audibly."
@@aguynamedted8475 good looking out 🙏😂
13:36 It looks good.
It only costed the reputation of an entire industry XD
the return of jeremy clarkson’s “meanwhile”
HAMMOND! YOU IDIOT!!
Just abt to comment this
Please polish the headlights on Lo car, it would look 💯 times better!
Maybe with some leds too
The Jermey Clarkson “Meanwhile” 😂
As someone who doesn't spray cars, but does model kits, the secret to a good coat is the same no matter what you're working on.
MULTIPLE
LAYERS
OF
LIGHT
COATS
In any case, HOT DAMN does the car look good. Excellent work!
The timid ass pouring and resulting spilling everywhere is getting to me.
Literally like 4 times through the video it was hilarious
james : hey there's pennies down here
nolan : hey that's mine
you know what am i thinking while making this comment, right?
The US coin shortage 🤣
Easy with the water, Jacob. It's not free like air!
that they're making hundreds of thousands of dollars and worrying about pennies?
@@Sonnungr true!
Didnt they litterally keep repeating "it is not the brand/dip, its us/our hardware."🤣
and I think they used like 11 year old dip lmao
@@vincentchiu999
They used the wrong dip. The method they used was the old way when people thinned dip with paint thinner cuz of course it was meant for stuff like tool handles and they used an old paint sprayer. The new PDS is specially formulated for spraying cars and the subsequent sprayer also.
I'll miss the terrible coat, as it really gave it that low budget look that it was worked around, and imperfections have character, but I'm glad you got the Z to look more refined, and making a really cheap everyday track car seem like a decent option.