Sandro and Angelina have really good chemistry and host balance together, she is very technical and explanation orientated, and he is naturally funny and relatable. So when their together you get good detail, but also it doesn't become too dry because he keeps it light.
@@matthewbarry4464 Was just going to say, Sandro's funny and relatable but he still knows his shit. They're both pretty knowledgeable and great at explaining things, both in terms of "what broke", "how to fix it" and/or "this is how this system works" - which is why I forgive the react videos because it's not *just* them going "WOW THAT'S CRAZY", but they actually break stuff down and talk about what happened.
its a no brainer for them. some of the students will be early adopters, will get used to it and love it, and will insist on getting it for their shops asap.
@@DCimpressionsthis is what makes it a win all around. The school gets a great tool for free, and I’m sure students will fall in love with it and it will lead to sales
To Donut Media: RMS is now the best thing you’ve got going. Sandro and Angelina are SOLID GOLD!!!! I will watch them on whatever channel they’re on. Angelina’s videos on her channel have taught me a lot and Sandro is hilarious!!. I grew up in L.A. so their style makes me feel right at home. Please don’t screw up this channel!!!
The laser cleaners are the most insane to me. I’ve seen them for a few years now and don’t stop being amazed by it. They were originally invented to clean statues at church’s and stuff that are super old because cleaning them was wearing them down over the centuries. The craziest thing I’ve seen is a guy cleaning a piece of metal and the laser went over his hand. It didn’t even hurt him and all his friends started laughing saying “dang those are some clean nails”. No joke it cleaned the dirt under and imbedded in his nails. Crazy technology.
@@Kai...999 Nah, way simpler. It just vaporizes stuff by dumping a lot of heat into it really fast. Human skin doesn't absorb the energy of _some_ laser wavelengths as readily so a short exposure will be fine, but it _can_ easily cause very nasty burns.
@@somdudewillson There is also a few other factors at play like dissipation and thermal capacity. TLDR, it actually works nearly the same way on human skin, but on a much smaller and therefore slower scale. You probably end up with some serious sunburns if you actually wash your hands with it or anything because you basically exfoliate via laser. The rust particles just absorb a lot more energy way more quickly and are generally larger than dermis cells as ablated units, so the effect is a lot more spectacular and flashy when they sublimate.
I actually went to a shop that uses those lasers when my employer was selling a truck and it needed the VIN number on the frame cleaned from rust. Amazing stuff.
I found Angelina on TH-cam back when she was making classroom style videos and that helped me tremendously and got me through my automotive classes during covid. I absolutely love her. And Sandro just has the best humor!
Sandro is in his ELEMENT at the laser shop, he knows exactly what he wants to see from the tools and he's got such a clear picture in his head of what he expects. I love these two, their attitudes are such a good pairing and their knowledge combined makes this so conversational but informative.
Sandro is the man who has seen some shit, been some shit and done some shit. He's goofy because he knows that, in the moment, he's got 95% of things handled.
Lol it has nothing to do with everyone intelligent and talented leaving for better horizons and all that's left are the every day suspects and cholos too sad to make an honest dime?
ANGELINA and SANDRO hands down best team of mechanic hosts on this channel. All the mechanics deserve some credit but when I see SANDRO and ANGELINA, I know I'm going to get a good episode. Thank you.
If anyone is curious how the laser is removing rust, it's using laser ablation: "Laser ablation is a process in which a laser beam is used as the main tool for the ablation of the target material. A laser, as a higher concentrated energy source, is centered at a specific place of the target material for the evaporation of light-absorbing materials. The term “ablation” means the removal of surface atoms by a multiphoton excitation process, i.e., thermal evaporation." (Shahid, 2022) "Laser ablation is a process of material removal under high-intensity laser irradiation resulting from strong laser-material interactions. Although laser ablation is not used for active-material synthesis, it is a valuable technique for precise cutting and patterning of materials, particularly in fabrication of WEGs. Metals, semiconductors, ceramics, and polymers can be machined by laser cutting, making laser ablation suitable for machining the layers and components in WEGs, including electrodes, active materials, and packaging layers." (Shen, 2024) "Laser ablation is a procedure where solid materials can be removed from the surface of that solid material upon irradiation of a laser beam. Higher flux converts the materials into plasma, whereas in presence of lower flux the material evaporates or sublimes by absorbing heat energy. The advantages of this process are: • It is simple. • It is rapid. •The end product has easily tunable surface properties." (Saha, 2023)
Quite honestly Angela is the worst. She literally mansplains every lost issue repeats herself like six times and then doesn't add any specialized information on each topic. She's me just more toxic
@@charles-antoinemartel-roy As an aerospace design engineer, I can say this accounts for about 25% of the reason. Another 25% is cost saving measures by reusing existing parts. The remaining 50% is, "We want you to redesign this 1000+ component assembly for X reason, but any changes you make can't result in us having to do any sort of static or dynamic testing, and we need it done by last week." But hey, working on planes is still fun tho!
When she said: "I'm not gonna lie, this is... A little... AROUSING." I sprayed my drink all over the place. 🤣🤣🤣🤣 Just wasn't expecting that at all!!! 😅
Both of them understand the practical application but the duo of angelina going in depth on what were seeing then sandro putting what angelina said into laymans terms for average people to understand is so fire. Add on their individual personalities and natural chemistry and its a certified banger everytime. We love steph and paul too
Love that Redline donated that unit to the school Angie teaches at! As others have said, a smart decision for both business purposes and for community outreach/goodwill. I can see how useful that tool is, not just for the shorties out there, but just saving mechanics of all sizes from excessive back pain. Plus I’m sure even the tall mechanics can’t easily reach the back of the engine bay of a modern bigass pickup.
I love these 2 together..Sandro I saw first and he's FUNNY!! And Angelina is just sooo knowledgable and funny too. She's dope. Please more vids with these 2 partners!!
10:59 this is our tool the N2 Neuron. We are local to you guys (Los Angeles) and would love to get you some to look at. Yes it has scope like functions. Also always looking to add new updates! Thanks for showing our tool!
Honestly, at this point Donut should just do project videos with these two. Watch as Sandro and Angelina take their Civics to the next level and then race them at the end!
They should be the only two on these advice videos. Sure they can say in the thumbnail when that Miata founder is doing a video but these guys are the greatest duo of all time.
I think the really impressive part of those laser rust removers is the lack of damage to the object. It's really easy to scratch up the finish, or have to remove a lot of material, using more traditional methods like wire brushes. That wrench looked basically new after it was cleaned.
@@Vermilion2214 it's more then a lot. What bothers me with the video is the fiber welder, though. That fiber laser welder is capable of blinding instantly from 100s of feet away. The company I worked for built them. They were run on robotic arms in sealed rooms with special glass to catch stray radiation. The goggles they had on aren't even for fiber optic laser's wavelength and didn't have a seal.
Biggest downside of the fancy lasers is that they cost tens of thousands of dollars. Once they become more mainstream and aren't the price of a new car, hell I might even get one to do rust removal on the side lol
@@johnconnor2572 If you are the type that likes to research, you should look into wavelengths. Different colors, densities, and compositions all have an effect on a lasers abilities. For instance, a fiber laser can cut black acrylic, but not clear. Clear acrylic just heats up and melts.
@@mattiemathis9549 you should see industrial-size laser welders just CHURNING through quarter-inch steel plate. The really impressive bit isn't just how clean and consistent the weld is, it's how fast you can get the weld done. Imagine a robotic welding apparatus, computer controlled (similar to what a CNC operator does these days), that can churn out consistent, repeatable, flawless looking welds on any kind of material combination.
Not gonna lie, I got semi when I saw how clean that was. It's no artistic TIG, with blued steel and a weaved bead, but for practical applications it's just *chef's kiss*.
i am seeing a little bit of porosity in the weld they put on the pipe, and i'm guessing anything deeper than surface rust would absolutely still have to be hit with a wire wheel to prevent that. it would probably be pretty handy if you're doing bodywork, and it'd be super easy for a robot to use... but that weld looks weak as fuck ngl
A big thing with induction heaters is that because they work so fast, you're far more easily gonna heat up for instance a nut fast enough that it expands a good deal well before whatever it's on expands too. That id much more difficult to do with a torch. A lot of induction heaters also have fairly basic coil attachment solutions. The one I got just clamps down on it and it's 5mm diameter. So for $18 I got a 5 meter roll of 5mm copper brake line and a roll of fiberglass sleeve. Meaning, for 18 bucks, over the last 2 years I've made about 8 fully custom shaped induction coils/attachments to fit it in difficult places, and I still got about a meter left.
I was a technician at Firestone for a few years. Absolutely loved this little gadget for alignments, some of these trucks/cars in virginia are absolute rust buckets.
I'm a Robotics/Automation engineer and a former electro-mechanical technician. In engineering classes we had a professor who told us there are only 3 types of engineers. He stated that 90% of all engineers can be easily categorized into groups 1 and 2, and only the last 10% in category 3 are worth a damn. He had everyone in the class stand up who came from a technical background (~12 of 80) and told us in front of everyone before our midterm that we were the only hope to save engineering and that he would personally be grading us harder than anyone else because he would rather see us fail than become category 1 or 2. 1. Engineers who became an engineer for job security and money 2. Engineers who are essentially artists and have minimal to no real world experience working on anything as a technician 3. Engineers who were former techs or think about the tech first when designing something
Absolutely spot on! Not an engineer but, was a mechanical draftsman (20yrs) in Aerospace DoD R&D. I did the iso's from multiple engineers ortho's building everything into one unit ... on paper ... for exploded views (I made the transition to AutoCAD early 90s, still in DOS). They appreciated that I was a prior jet engine mechanic and certified motorcycle mechanic. If I caught an error and corrected it, no one got butt-hurt egotistical about it, they said thanks, good catch. All of those engineers had first hand experience getting their hands dirty, I learned so much from them. I miss those days. All that I worked with in the late 90s into the 2000s fit your 1 & 2 category.
Group 3 represent! I'll never forget the look on a machinist's face in my first job when I went to him and asked "hey, this is what I learned in school for notation, does it make sense to you? Anything I can do better?" The cynical, grouchy, angry machinist would fight my boss tooth and nail about an "emergency" project, but if I said "Hey I need..." he just held out his hands for the print. It makes ALL the difference. Professionally, I live by the motto "if I make their job easy, they'll make my job easy"
I love that there aren't any gimmicks, no heavy production or overhyped graphics. The writing and presenters alone are enough to produce must-watch content. Don't fucking change anything. Just keep doing what you do.
@@popeye089just watched the most recent donut vid, not that I have a problem with it but the 🏳️🌈 vibes were up there imo, they also got a new guy as well
My whole life, I have always done two things, 1. Study the Human Condition and 2. LEARN from EXPERTS. I am an expert in my field, I know what I am talking about because of my 30 years of experience. When I hear Sandro and Angelina talk, I just try to soak up as much information as I can. The real weird thing? I will NEVER work on my car, but this information is so fascinating, and so well presented, I can't stop watching, and I just have to know. Being a lifetime learner, you never stop.
As someone that semi regularly uses a different model laser welder, I winced seeing him stick his face right over the reflection zone without a laser welding helmet and have his hand infront of it. I've felt the beam bouce back onto me and the warm vibrations from it, but I've also blasted thin holes in mig gloves by accident. Just a personal safety hairs on the back of my neck thing watching him. That said, I can weld 2 pieces of 16 gauge steel together and touch the metal bare handed 3-4 inches away from the weld area immediately and regularly weld on 18 gauge flanges onto things without warping. Even demo'd the unit for former coworker and his new employers and they got one as well. Ain't cheap though, ours cost around $20k, and now miller sells thag brand of laser welder for $50k but you also get the new carbon fiber helmet with it instead of the yes welder helmet with an aluminum plate and special piece of glass
What works better for a chair is the folding rear jump seat from a 2011 or earlier Ford Ranger. I keep one in the bottom of my tool box. It's fantastic, and because it's upholstered it won't scratch paint.
I love watching these two!!! They have such good on screen chemistry!!! Also Steph!!! I love when she is on the channel too. Sandro, Angelina and Steph are the titillating trio!!!!!
15:33 in 2012, at Princess Auto (basically Canada's harbor freight) I bought a ratchet, and if you're stuck in a tight spot like this, it has gears inside, so twisting the handle (like a bike throttle) would turn the ratchet. You don't have to be able to move the ratchet at all!. $12 over a decade ago
I have a Stanley ratchet like that, got it around 2004 or so. I’ve only used it about 4 times since then, but when I used it, it was literally the only tool in the world that could do the job.
It's really weird that there's virtually nothing on the internet comparing gearless vs rotator ratchets, given that they basically serve the same niche of needing a ratchet when there's little swing room. I imagine a gearless ratchet can deliver more torque, but a rotator needs literally zero swing.
He does cause it's a hack. That's why she has a predictable throw pattern, she is thrown off by the wild name too. It's like saying it in a different order triggers a Brain glitch for a millisecond and that's all it takes.
Discovered this channel a few months ago, you are a great comical duo and never fail to put a smile on my face - cars + comedy what better combo! Look forward to future content!
In my younger days I worked in the family business doing the paint work on Rolls Royce, Ferrari, Honda...what ever if the owner wanted to do the repair/restoration work properly on their chariot. That first body work robot could not add an old 1980 RR fender or Q-panel that needs to have its body seams smoothed out using "Lead". That is definitely a lost art. Having said that, the Laser that destroys rust and probably the Laser welder, Bolt heater, definitely has a much needed place in restoration work. That Superman Creeper is the Goat.
Donut may be dying and I had to unsub after it just got worse and worse when Jerry and Zach left but as long as Sandro and Angelina are the bread and butter of this channel I’m here for it
That first video: the guy in it that kept saying "look at this, they are taking our jobs".. Dude, they have had automated welders, etc. in auto factories for years now
4:03 there are going to be a lot of permanently blind welders while these laser welders become more common. there is no safety squints. there is no "oopsies, guess i got some arc flash." there is either 100% full protection from ANSI spec goggles, or you go permanently blind INSTANTLY. Just the reflection of the laser off a surface can be powerful enough to instantly blind you permanently before you can blink. no oopsies. no "walk it off". not even any surgery will be able to correct your vision. you will be completely blind forever. its a massive contrast from welding where you can get away with a lot more safety wise. if a skilled electric welder grabs a laser welder and tries the same tricks, they could be horrifically injured
The important thing is it didn't fry the camera. That means one can attach it to a robot and one can do remote welding. It'll work in space and underwater. No need for cleaning. Just go there, weld and come back without all this diving and astronaut training.
Well, that's what you gotta learn. As an industrial maintenance tech, safety equipment is there to help you, not do it for you. Either you work safely inherently, regardless of the glasses or gloves or ect, or you don't work in the field for long. Ive seen new techs get injured regardless of the safety gear, and I've seen techs with a decade behind them weld upside down in a wet environment while laying on an I beam fourteen feet off the ground with no safety harness (actually that was me). Safety gear will never beat knowing how to work safely.
I can think of a dozen reasons to keep the collapsible stool in your pickup, trunk, shed, wherever. My first thought was taking it fishing or hiking even. Gotta go check it out.🤠
That VR tech is definitively a future. Cars are already becoming so complex that new mechanics have hard time to catch up and repairs take forever because doing anything more complex on a car you have never worked on is like planing a brain surgery.
It's actually AR (augmented reality) not VR. I'm going to agree that it's going to be the future for technicians in any field where you are hands on, but need easy access to documentation to assist in the job.
I think, by how that was edited , you have the editor to thank for that. I do not think that scene happened the way we saw it. But, yes, my first thought was, is he looking at the creeper?
Laser rust removal and laser welding are Simply Amazing!!! Str8 Up!!! All body shops and any mechanic shops should absolutely 100% invest in these!!! They're Amazing Tools!!! 🔥🔥🔥
I have a laser cleaning machine, mine is a pulse laser and it's a lot easier on surfaces that aren't going to coated. They are less than $10k. Laser welders are like a mix of TIg quality and Mig speed.
Something else to think about with the Redline Creeper (great name!) is it opens up the field to disabled folks who wanna into working on cars! Someone who can’t stand for too long can get on that thing and do his work, I use to know a guy who use to paint cars till he got hit by a car, that would let him work on the hood of the car and maybe the roof! Fantastic product
That stool is priceless. I attached a cushion with Velcro to the top. I live by it. You also don't have to use it FULLY deployed. You can use it at any height in between.
I stumbled upon this channel a few hours ago with the attorney video and I'm kinda hooked. Hilarious and wicked smart about your profession! Absolutely liked and subscribed!
Now I gotta build myself an over the top/fender creeper. Always difficult to not break or bend something trying to support yourself and reach a spot. Such a good idea.
Sandro is great by himself. Angelina is great by herself. But Angelina and Sandro together are the best!
Synergy
I like Angelina with that other chick. She really brings out the Angelina's Ratchet.
@@justinlast2lastharder749 The off-roading chick? She's awesome.
outstanding
Absolutely
Sandro and Angelina are just carrying this Chanel at this point
Jimmy's cool, too imo
💯
fr! and they both still work fulltime too!
I 100% agree 😁
Soon they're gonna be the new main hosts on Donut too
Sandro and Angelina have really good chemistry and host balance together, she is very technical and explanation orientated, and he is naturally funny and relatable. So when their together you get good detail, but also it doesn't become too dry because he keeps it light.
Agreed that the 3 they use now are the best. Acknowledging that getting in front of a camera is not that easy, all the others were informative.
Got to give Sandro his technical props as well with the added bonus of being able to explain things spot on in a funny manner. Awesome duo.
@@matthewbarry4464 Was just going to say, Sandro's funny and relatable but he still knows his shit. They're both pretty knowledgeable and great at explaining things, both in terms of "what broke", "how to fix it" and/or "this is how this system works" - which is why I forgive the react videos because it's not *just* them going "WOW THAT'S CRAZY", but they actually break stuff down and talk about what happened.
Yeah- she comes off as the reaponsible sister, and Sandro's the little bro that's always making her shake her head.
But Angelina can also follow Sandro when he is riffin' about the "boys". They are an amazing team.
Angelina "I'm Small"
Sandro "Oh No..."
🤣🤣🤣
These two are just an incredible duo
It's like Sandro had to stop himself from making a short joke when she said that
9:29 Kudos Redline for donating the creeper to Angie's school.
Kudos to Redline for donating that unit to her school since she liked it so much. Seems like a really great addition to any shop, honestly.
Yeah, came to say this.
its a no brainer for them. some of the students will be early adopters, will get used to it and love it, and will insist on getting it for their shops asap.
Redline are genuinely good people.
@@DCimpressionsthis is what makes it a win all around. The school gets a great tool for free, and I’m sure students will fall in love with it and it will lead to sales
Smart biz and community decision
To Donut Media: RMS is now the best thing you’ve got going. Sandro and Angelina are SOLID GOLD!!!! I will watch them on whatever channel they’re on. Angelina’s videos on her channel have taught me a lot and Sandro is hilarious!!. I grew up in L.A. so their style makes me feel right at home. Please don’t screw up this channel!!!
yes
I'm from Toronto and I love their style!
Angelina has her own channel ?
@@boyracer3477 She's a bonafide automotive teacher and has some pretty solid videos on wrenching.
www.youtube.com/@ms.a_theshopteacher
@@boyracer3477 youtube.com/@ms.a_theshopteacher
I’ve never seen more pure joy on anyone’s face like Sandro and Angelina had on theirs while watching the laser weld.
Find yourself someone who looks at you like these two look at a laser weld/rust removal 😍
The laser cleaners are the most insane to me. I’ve seen them for a few years now and don’t stop being amazed by it. They were originally invented to clean statues at church’s and stuff that are super old because cleaning them was wearing them down over the centuries. The craziest thing I’ve seen is a guy cleaning a piece of metal and the laser went over his hand. It didn’t even hurt him and all his friends started laughing saying “dang those are some clean nails”. No joke it cleaned the dirt under and imbedded in his nails. Crazy technology.
How does that work I wonder? Like ion separation or something?
@@Kai...999 Nah, way simpler. It just vaporizes stuff by dumping a lot of heat into it really fast. Human skin doesn't absorb the energy of _some_ laser wavelengths as readily so a short exposure will be fine, but it _can_ easily cause very nasty burns.
@@somdudewillson There is also a few other factors at play like dissipation and thermal capacity. TLDR, it actually works nearly the same way on human skin, but on a much smaller and therefore slower scale.
You probably end up with some serious sunburns if you actually wash your hands with it or anything because you basically exfoliate via laser. The rust particles just absorb a lot more energy way more quickly and are generally larger than dermis cells as ablated units, so the effect is a lot more spectacular and flashy when they sublimate.
I actually went to a shop that uses those lasers when my employer was selling a truck and it needed the VIN number on the frame cleaned from rust. Amazing stuff.
I found Angelina on TH-cam back when she was making classroom style videos and that helped me tremendously and got me through my automotive classes during covid. I absolutely love her. And Sandro just has the best humor!
Sandro is in his ELEMENT at the laser shop, he knows exactly what he wants to see from the tools and he's got such a clear picture in his head of what he expects.
I love these two, their attitudes are such a good pairing and their knowledge combined makes this so conversational but informative.
That's a great point! Sandro is a total goofball but the man really knows his shit.
Sandro is the man who has seen some shit, been some shit and done some shit. He's goofy because he knows that, in the moment, he's got 95% of things handled.
@@BSRaven And all of it "for tha boys!"
Angelina and Sandro are finally becoming donut members
I hope they make it official though.
Lol it has nothing to do with everyone intelligent and talented leaving for better horizons and all that's left are the every day suspects and cholos too sad to make an honest dime?
@@jissbrown7 I hope they won't regret it
@@jissbrown7I hope you wake up and someday officially recognize just how sad and pathetic everyone else knows you are.
Well people seem to be leaving lol
I want Sandro and Angelina doing everything at this point: reading the news, commentating on football, reading the effin weather... EVERYTHING 😊
Its bad I just read that in sandros voice too.
YES!!
ROFL
ANGELINA and SANDRO hands down best team of mechanic hosts on this channel. All the mechanics deserve some credit but when I see SANDRO and ANGELINA, I know I'm going to get a good episode. Thank you.
If anyone is curious how the laser is removing rust, it's using laser ablation:
"Laser ablation is a process in which a laser beam is used as the main tool for the ablation of the target material. A laser, as a higher concentrated energy source, is centered at a specific place of the target material for the evaporation of light-absorbing materials. The term “ablation” means the removal of surface atoms by a multiphoton excitation process, i.e., thermal evaporation." (Shahid, 2022)
"Laser ablation is a process of material removal under high-intensity laser irradiation resulting from strong laser-material interactions. Although laser ablation is not used for active-material synthesis, it is a valuable technique for precise cutting and patterning of materials, particularly in fabrication of WEGs. Metals, semiconductors, ceramics, and polymers can be machined by laser cutting, making laser ablation suitable for machining the layers and components in WEGs, including electrodes, active materials, and packaging layers." (Shen, 2024)
"Laser ablation is a procedure where solid materials can be removed from the surface of that solid material upon irradiation of a laser beam. Higher flux converts the materials into plasma, whereas in presence of lower flux the material evaporates or sublimes by absorbing heat energy. The advantages of this process are:
• It is simple.
• It is rapid.
•The end product has easily tunable surface properties." (Saha, 2023)
No matte what happened to Donut, as long as Angelina and Sandro still here, I will watch immediately!
Me too, these two are OGs
Quite honestly Angela is the worst. She literally mansplains every lost issue repeats herself like six times and then doesn't add any specialized information on each topic. She's me just more toxic
Oh I unsubbed to donut already once I saw this isn't on donut!
@@RekySai Take your meds.
@@RekySai she's a teacher and it shows, she's great at it. She adds so much good to this series. You're lost buddy
Sandro and Angelina confront engineers! I need this episode!
They'll see it's gonna be quite boring. Most answers are going to be "X executive wanted the bolts to be more hidden, because it looks cleaner."
Let's
@@charles-antoinemartel-roy As an aerospace design engineer, I can say this accounts for about 25% of the reason. Another 25% is cost saving measures by reusing existing parts. The remaining 50% is, "We want you to redesign this 1000+ component assembly for X reason, but any changes you make can't result in us having to do any sort of static or dynamic testing, and we need it done by last week."
But hey, working on planes is still fun tho!
They be like "Why are you the way that you are?"
@tylermiller3949 Yeah, as a software engineer, you're right
Sandro and Angelina legit the best hosts at donut
ESPECIALLY NOW
The state of Donut makes me sad. It was such a good channel…
@@_ezra6217since ever honestly
@@Jomitheelf That's what happens when you let a private equity firm come in and destroy everything
When she said: "I'm not gonna lie, this is... A little... AROUSING."
I sprayed my drink all over the place. 🤣🤣🤣🤣
Just wasn't expecting that at all!!! 😅
9:15 "overall it looks tight" 😂😂
It sure does 🤣
can confirm! 😅
Glad i wasn't the only one
The creeper looks tight too.
Came straight to the comments after that!😂
He ain't wrong tho
What are you doing honey? I'm scanning I'm F scanning! WHO THE F ARE YOU SCANNING!? Man, I died there. Sandro is the best
Redline donating that creeper to Angelina's school is awesome she deserves it!
Yeah!! And that shit ain’t cheep either!
Both of them understand the practical application but the duo of angelina going in depth on what were seeing then sandro putting what angelina said into laymans terms for average people to understand is so fire. Add on their individual personalities and natural chemistry and its a certified banger everytime. We love steph and paul too
Certified banger!?!?!?! What's wrong with you 😂😂😂😂
wtf with you😂
Love that Redline donated that unit to the school Angie teaches at! As others have said, a smart decision for both business purposes and for community outreach/goodwill.
I can see how useful that tool is, not just for the shorties out there, but just saving mechanics of all sizes from excessive back pain. Plus I’m sure even the tall mechanics can’t easily reach the back of the engine bay of a modern bigass pickup.
I love these 2 together..Sandro I saw first and he's FUNNY!! And Angelina is just sooo knowledgable and funny too. She's dope. Please more vids with these 2 partners!!
Still can't wait to see the drag race between Angelina + Steph vs Sandro
10:59 this is our tool the N2 Neuron. We are local to you guys (Los Angeles) and would love to get you some to look at. Yes it has scope like functions. Also always looking to add new updates! Thanks for showing our tool!
Drop us a line RMS@donutmedia.com and put ATTN: Tony & Mike in the subject matter. Let's talk!
Honestly, at this point Donut should just do project videos with these two. Watch as Sandro and Angelina take their Civics to the next level and then race them at the end!
They should be the only two on these advice videos. Sure they can say in the thumbnail when that Miata founder is doing a video but these guys are the greatest duo of all time.
I am so far down the rabbit hole of this channel it’s just incredible. I’ve learned so many things! I appreciate everything you guys and gals do.
I am not a mechanic. I know nothing about cars. But the personalities of these 2 kept me watching the whole video.
I think the really impressive part of those laser rust removers is the lack of damage to the object. It's really easy to scratch up the finish, or have to remove a lot of material, using more traditional methods like wire brushes. That wrench looked basically new after it was cleaned.
I've seen there's alot of hazard that come with the rust/Laser dust unfortunately. Use that protective gear 🤙.
@@Vermilion2214 it's more then a lot. What bothers me with the video is the fiber welder, though. That fiber laser welder is capable of blinding instantly from 100s of feet away. The company I worked for built them. They were run on robotic arms in sealed rooms with special glass to catch stray radiation. The goggles they had on aren't even for fiber optic laser's wavelength and didn't have a seal.
I was surprised it wasn't doing more damage to the concrete floor
Biggest downside of the fancy lasers is that they cost tens of thousands of dollars. Once they become more mainstream and aren't the price of a new car, hell I might even get one to do rust removal on the side lol
@@johnconnor2572 If you are the type that likes to research, you should look into wavelengths. Different colors, densities, and compositions all have an effect on a lasers abilities. For instance, a fiber laser can cut black acrylic, but not clear. Clear acrylic just heats up and melts.
These two just feel like friends I've never met. Sandro making me roll over here LOL
3:30 JESUS that weld is beautiful.
I’m going to dream about that weld tonight. 😂😂
@@mattiemathis9549 you should see industrial-size laser welders just CHURNING through quarter-inch steel plate. The really impressive bit isn't just how clean and consistent the weld is, it's how fast you can get the weld done. Imagine a robotic welding apparatus, computer controlled (similar to what a CNC operator does these days), that can churn out consistent, repeatable, flawless looking welds on any kind of material combination.
seriously... that rig is an effing DREAM
Not gonna lie, I got semi when I saw how clean that was. It's no artistic TIG, with blued steel and a weaved bead, but for practical applications it's just *chef's kiss*.
i am seeing a little bit of porosity in the weld they put on the pipe, and i'm guessing anything deeper than surface rust would absolutely still have to be hit with a wire wheel to prevent that. it would probably be pretty handy if you're doing bodywork, and it'd be super easy for a robot to use... but that weld looks weak as fuck ngl
11:03 Oh, great, a tool with a touch-screen. Because the one thing that everybody has while working on cars is clean hands.
This is the best video of the two of them together. Damn they are great. Can't wait for the race!
A big thing with induction heaters is that because they work so fast, you're far more easily gonna heat up for instance a nut fast enough that it expands a good deal well before whatever it's on expands too. That id much more difficult to do with a torch.
A lot of induction heaters also have fairly basic coil attachment solutions. The one I got just clamps down on it and it's 5mm diameter. So for $18 I got a 5 meter roll of 5mm copper brake line and a roll of fiberglass sleeve. Meaning, for 18 bucks, over the last 2 years I've made about 8 fully custom shaped induction coils/attachments to fit it in difficult places, and I still got about a meter left.
I still prefer torch.
I was a technician at Firestone for a few years. Absolutely loved this little gadget for alignments, some of these trucks/cars in virginia are absolute rust buckets.
Every comment is about how sandro and Angelina are the backbone of this channel and i couldn't agree more
And interestingly most of them have only commented on this channel once. I'm guessing a lot are bots saying the same thing over and over.
1:20 Somebody take that R8 away from Sandro 😂😂😂
I'm a Robotics/Automation engineer and a former electro-mechanical technician. In engineering classes we had a professor who told us there are only 3 types of engineers. He stated that 90% of all engineers can be easily categorized into groups 1 and 2, and only the last 10% in category 3 are worth a damn. He had everyone in the class stand up who came from a technical background (~12 of 80) and told us in front of everyone before our midterm that we were the only hope to save engineering and that he would personally be grading us harder than anyone else because he would rather see us fail than become category 1 or 2.
1. Engineers who became an engineer for job security and money
2. Engineers who are essentially artists and have minimal to no real world experience working on anything as a technician
3. Engineers who were former techs or think about the tech first when designing something
Absolutely spot on! Not an engineer but, was a mechanical draftsman (20yrs) in Aerospace DoD R&D. I did the iso's from multiple engineers ortho's building everything into one unit ... on paper ... for exploded views (I made the transition to AutoCAD early 90s, still in DOS). They appreciated that I was a prior jet engine mechanic and certified motorcycle mechanic. If I caught an error and corrected it, no one got butt-hurt egotistical about it, they said thanks, good catch. All of those engineers had first hand experience getting their hands dirty, I learned so much from them. I miss those days. All that I worked with in the late 90s into the 2000s fit your 1 & 2 category.
Group 3 represent!
I'll never forget the look on a machinist's face in my first job when I went to him and asked "hey, this is what I learned in school for notation, does it make sense to you? Anything I can do better?" The cynical, grouchy, angry machinist would fight my boss tooth and nail about an "emergency" project, but if I said "Hey I need..." he just held out his hands for the print. It makes ALL the difference.
Professionally, I live by the motto "if I make their job easy, they'll make my job easy"
Only 2 types of real Engineers, Practical and Textbook.
The rest are just time-servers that you don't allow near anything critical.
This is great. More actual demonstrations of things in person, rather than just reacting to clips. Plus Angie and Sandro are always great together!
I love that there aren't any gimmicks, no heavy production or overhyped graphics. The writing and presenters alone are enough to produce must-watch content. Don't fucking change anything. Just keep doing what you do.
At least we still have y’all
Real mechanics the only thing I watch anymore from them
@@popeye089just watched the most recent donut vid, not that I have a problem with it but the 🏳️🌈 vibes were up there imo, they also got a new guy as well
Wow there's always that one person... 🙄 @@afroman5531
@@afroman5531 Why mention it at all? Sounds like you do have a problem with it
@@coastaku1954 Watch Seinfield then you might understand. Not that there's anything wrong with it.
Sandro the underrated mechanic comedian
You take that back! Sandro is HIGHLY rated by us!
My whole life, I have always done two things, 1. Study the Human Condition and 2. LEARN from EXPERTS. I am an expert in my field, I know what I am talking about because of my 30 years of experience. When I hear Sandro and Angelina talk, I just try to soak up as much information as I can. The real weird thing? I will NEVER work on my car, but this information is so fascinating, and so well presented, I can't stop watching, and I just have to know. Being a lifetime learner, you never stop.
"Heard you bought a new tool box."
"Nah, dude. Went to my Artificer."
"Dude....what?"
*pulls out drawer in Toolbox of Holding*
I hope these two are getting paid the big bucks. They’re killing it. I’ll watch anything they host.
"Overall, it looks tight" as Sandro is walking behind Angelina... my thoughts exactly Sandro! :)
wholesome moment
I thought exactly the same haha 🤣
I was thinking the exact same thing. She's pretty hot and smart to boot, along with a great personality, of course.
I love when Sandro and Angelina get paired together. They are so flipping funny together
As someone that semi regularly uses a different model laser welder, I winced seeing him stick his face right over the reflection zone without a laser welding helmet and have his hand infront of it. I've felt the beam bouce back onto me and the warm vibrations from it, but I've also blasted thin holes in mig gloves by accident. Just a personal safety hairs on the back of my neck thing watching him.
That said, I can weld 2 pieces of 16 gauge steel together and touch the metal bare handed 3-4 inches away from the weld area immediately and regularly weld on 18 gauge flanges onto things without warping. Even demo'd the unit for former coworker and his new employers and they got one as well.
Ain't cheap though, ours cost around $20k, and now miller sells thag brand of laser welder for $50k but you also get the new carbon fiber helmet with it instead of the yes welder helmet with an aluminum plate and special piece of glass
What works better for a chair is the folding rear jump seat from a 2011 or earlier Ford Ranger. I keep one in the bottom of my tool box. It's fantastic, and because it's upholstered it won't scratch paint.
I liked this episode where they got to actually see the stuff in person and not just react to videos, even those are very fun with this duo
Sandro needs a "For the Boys" livery or at least that as a sticker on his Civic for the race.
He needs to start using "Ferda Boys" instead XD
Ryan Long and Danny Polishchuk already have that Slogan and Merch. I'd love to see Sandro on Boyscast though.
I love watching these two!!! They have such good on screen chemistry!!! Also Steph!!! I love when she is on the channel too. Sandro, Angelina and Steph are the titillating trio!!!!!
I gotta say, Justin busting out laughing in the background whenever these two talk really adds to the experience to me 😂
These tools are pretty sweet. I could've used em back in the day.
Amazing. You guys are great.
Steph , Sandro and Angelina needa start own channel. Definitely would love to see them do some builds
12:10 this is why Sandro is the best😭😭😭 he knows all the scenarios!🤣🤣 he has been around them tóxicas!
💯 😂
“Overall looks tight” 😏 Sandroooo what were you looking lol!
Angelina is the best, you actually learn stuff, Sandro is too funny. They’re both super entertaining
So glad I found this channel. Love these two!
15:33 in 2012, at Princess Auto (basically Canada's harbor freight) I bought a ratchet, and if you're stuck in a tight spot like this, it has gears inside, so twisting the handle (like a bike throttle) would turn the ratchet. You don't have to be able to move the ratchet at all!. $12 over a decade ago
This one is gearless, which I suppose is the new innovation.
@@3xceIIent they sell them at fred meyer, not really new but can be better than tooth & pawl
I have a Stanley ratchet like that, got it around 2004 or so.
I’ve only used it about 4 times since then, but when I used it, it was literally the only tool in the world that could do the job.
It's really weird that there's virtually nothing on the internet comparing gearless vs rotator ratchets, given that they basically serve the same niche of needing a ratchet when there's little swing room. I imagine a gearless ratchet can deliver more torque, but a rotator needs literally zero swing.
13:48 "paper, scissor, rock"??? That threw me way off 😂
Right everything is backwards in California I think😂
I always called it Rock, Paper Scissors and I live in Cali, no idea why he says it that way lol
Definitely him lol, not a cali thing for sure. We call it rock paper scissors like everyone else😂
He does cause it's a hack. That's why she has a predictable throw pattern, she is thrown off by the wild name too. It's like saying it in a different order triggers a Brain glitch for a millisecond and that's all it takes.
@@mattadams7922it's not that deep
The match up is finally happening! EVERYONE REMAIN CALM!!! Let's go! For all the boys and the girls! I'm psyched!
Discovered this channel a few months ago, you are a great comical duo and never fail to put a smile on my face - cars + comedy what better combo! Look forward to future content!
This is exactly what I want to see from Sandro and Angelina, this is gold.
In my younger days I worked in the family business doing the paint work on Rolls Royce, Ferrari, Honda...what ever if the owner wanted to do the repair/restoration work properly on their chariot.
That first body work robot could not add an old 1980 RR fender or Q-panel that needs to have its body seams smoothed out using "Lead". That is definitely a lost art.
Having said that, the Laser that destroys rust and probably the Laser welder, Bolt heater, definitely has a much needed place in restoration work.
That Superman Creeper is the Goat.
These two MVPs single handily carrying this channel.
YES, a Sandro Angelina race teaser at the end, I am hype! I love these two (and everyone else on RMS) and am so glad y'all are keeping it strong.
as much as I hate all the paid promotion, I absolutely love to see the guys testing some of the stuff in person. keep it coming, guys!!!!!!!!
Donut may be dying and I had to unsub after it just got worse and worse when Jerry and Zach left but as long as Sandro and Angelina are the bread and butter of this channel I’m here for it
That first video: the guy in it that kept saying "look at this, they are taking our jobs".. Dude, they have had automated welders, etc. in auto factories for years now
4:03 there are going to be a lot of permanently blind welders while these laser welders become more common. there is no safety squints. there is no "oopsies, guess i got some arc flash." there is either 100% full protection from ANSI spec goggles, or you go permanently blind INSTANTLY. Just the reflection of the laser off a surface can be powerful enough to instantly blind you permanently before you can blink. no oopsies. no "walk it off". not even any surgery will be able to correct your vision. you will be completely blind forever. its a massive contrast from welding where you can get away with a lot more safety wise. if a skilled electric welder grabs a laser welder and tries the same tricks, they could be horrifically injured
The important thing is it didn't fry the camera. That means one can attach it to a robot and one can do remote welding. It'll work in space and underwater. No need for cleaning. Just go there, weld and come back without all this diving and astronaut training.
Well, that's what you gotta learn. As an industrial maintenance tech, safety equipment is there to help you, not do it for you. Either you work safely inherently, regardless of the glasses or gloves or ect, or you don't work in the field for long. Ive seen new techs get injured regardless of the safety gear, and I've seen techs with a decade behind them weld upside down in a wet environment while laying on an I beam fourteen feet off the ground with no safety harness (actually that was me).
Safety gear will never beat knowing how to work safely.
I can think of a dozen reasons to keep the collapsible stool in your pickup, trunk, shed, wherever. My first thought was taking it fishing or hiking even. Gotta go check it out.🤠
Why is this channel still under a million subs. Even if you're not a car person, these two are highly entertaining!
The laser rust remover is great to clean your nails and hands.
Don't do it to often though.
Nice switch-up from the norm and with my 2 favourite mechanics.
Shoutout RedLine for donating that creeper to the school! That’s tight.
I love Sandro and Angie, they click and react so well together.
That VR tech is definitively a future. Cars are already becoming so complex that new mechanics have hard time to catch up and repairs take forever because doing anything more complex on a car you have never worked on is like planing a brain surgery.
It's actually AR (augmented reality) not VR. I'm going to agree that it's going to be the future for technicians in any field where you are hands on, but need easy access to documentation to assist in the job.
@@chrisjohnson7929 do u know what he's using would love to try it.
Angelina and Sandro my two favorite mechanics on the show 🙂
At 9:16 Sandro is saying what we are all thinking. No way that was unintentional lol.
"Overall, it looks tight."
Let me see! Let ME see!!
He's all about that body work.
“You go ‘that’s a nice ass’ then you stand back and you’re like ‘that’s a nice ass’”
Tight! Oh ya the creeper is nice too!
I think, by how that was edited , you have the editor to thank for that.
I do not think that scene happened the way we saw it.
But, yes, my first thought was, is he looking at the creeper?
@8:22 Sandro in mental paralysis trying like hell not to make a "Maxi-pad" joke.
Serious question, what is a Maxi-Pad?
@@paulomunozartavia2282 period pad.
@@Acorn_Anomaly Thanks, boss. I guess it is a brand
@@paulomunozartavia2282 It's a female sanitary product used to protect clothing (underwear) on a monthly basis.
Laser rust removal and laser welding are Simply Amazing!!! Str8 Up!!! All body shops and any mechanic shops should absolutely 100% invest in these!!! They're Amazing Tools!!! 🔥🔥🔥
These two are so amazing together. Love the vibe between them. I'll watch anything if they are hosting the video.
I have a laser cleaning machine, mine is a pulse laser and it's a lot easier on surfaces that aren't going to coated. They are less than $10k. Laser welders are like a mix of TIg quality and Mig speed.
Yeh we need that engineer episode for sure!
0:24 "They took our jerbs!!!" Lol
Duuk errr doo!!
Dukka derrrrr
Something else to think about with the Redline Creeper (great name!) is it opens up the field to disabled folks who wanna into working on cars! Someone who can’t stand for too long can get on that thing and do his work, I use to know a guy who use to paint cars till he got hit by a car, that would let him work on the hood of the car and maybe the roof! Fantastic product
Loves this duo. You two rock and I love seeing your thoughts on these different subjects. Its always a blast.
For real dude, that welder is unbelievable.
18:46 Reminds me of that scene from Bruce Almighty when God opens the filing cabinet full of Bruce's life history 😂😂
I thought the same thing lol
riiight...?... i was searching for this comment
These two are the fuckin shining jewel of this channel
really is there channel
That stool is priceless. I attached a cushion with Velcro to the top. I live by it. You also don't have to use it FULLY deployed. You can use it at any height in between.
Want to know how much I love this channel? I let all the ads roll.
At least we still have some classic hosts.
ANGELINA: "I wanna see them do a Honda crank bolt, then we'll talk.." I was thinking the exact same thing at that moment 😅
I’ve seen a tech bend a 1/2” Snap-on breaker bar trying to loosen one.
@@freefall8243 My 250 pound buddy was literally hanging at the end of 6 feet of pipe and nothing happened lol
Its the OGs!
I stumbled upon this channel a few hours ago with the attorney video and I'm kinda hooked. Hilarious and wicked smart about your profession! Absolutely liked and subscribed!
Now I gotta build myself an over the top/fender creeper. Always difficult to not break or bend something trying to support yourself and reach a spot. Such a good idea.
9:16 I agree, looks really tight