Dear Sir - you are correct, the quality of components has improved exponentially. Today, if the builder does his or her job perfectly, and you get a "good" barrel, superb results are almost guaranteed. Thanks...........
I appreciate everything QMM does to confirm accuracy of their rifles, anyone that is serious about precision knows, many hours and much knowledge goes into deciphering a load for a particular build......I have the patience, knowledge and components to wring out your 33XC without over shooting your gun.
Nice work. Yeah, I was wondering about your customer. I see you shot the 33 XC some more.. 100 yards and another 5 shot group. I think it is a good barrel and good build. I think the customer will be happy with it once he shoots it. Either way you definitely did your job well. I'm surprised you had to bead blast it all off etc.. and do the duracoat again. A few scratches here or there is fine. I don't even have mine coated anymore. just go with shiny steel then I don't mind if I scrape it. Thank you again for sharing your results.
Dear Sir - I don't think he will shoot it; he saw how much it hurt me and he isn't entering the pain zone. Some young tough guy will probably get a great deal. Thanks..............
Unfortunately, some people want everything for free. I’m new here and I kind of figured out from the get go that .25 accuracy was going to involve some extra man hours , which equates to more money 💰. As it should be . Love your videos . 👍
Sadly, so many people today are selfish, inconsiderate JERKS (I'm being nice here)! I was wondering if the .33XC 'guy' was going to do 'the right thing' and I now have that answer. It sure looked like you went way above and beyond (anything I would expect anyway) on that build and nada. That's on him. Thanks for bringing us along!
Hey, 33XC guy (Customer) I'd gladly work up a 3 shot group for you...I'm not afraid to fire 3 shot group, I have the brass, powder, bullets and primers for this gun....I'd be happy to make you feel good about all the work that has been put into this build!!!
@@quarterminutemagnums That's a lot of firepower. Not something I'd want to shoot. My puny 30 cal and 7 cal magnums work fine on moose and elk. I can handle that recoil and even the 338 Edge with a 300gr bullet at 2650fps. I've not hunted anything requiring more than a 30-06 with a 180 grain bullet. My current magnums turned out to be overkill anyway but they shoot extremely well and I like them
Just had a 6.5x47 lapua built. Bartlein, Kelblys golden bear, McMillan stock,Nightforce glass. Best five shot group so far with virgin brass.172. Hasn’t shot any group over one half inch.
Dear Sir - I don't know; if you are serious, I could put you in touch with the customer. The rifle is on the way to his receiving FFL dealer now. Let me know............thanks.
Dear Sir - good ones are out of my price range. Plus, if I could actually hear the crap coming out of .........well, let's just not go there. Thanks..................
That is absolutely incredible. Factory ammo & barrels have changed since the ’60. Quality of the build is impeccable.
Dear Sir - you are correct, the quality of components has improved exponentially. Today, if the builder does his or her job perfectly, and you get a "good" barrel, superb results are almost guaranteed. Thanks...........
Peoples lack of respect and gratitude just amaze me. You went above and beyond with that build and not a single thankyou! I’m shocked
Dear Sir - we live in dark times. Ultra MAGA !!!!!!! Thanks.
Im astonished how much work you put into that rifle. Ive had several rifles built that didn't even get test fired.
Dear Sir - most gun builders do not test fire; too expensive and time consuming. Thanks........
Well, thank you for the 33XC series. I learned a lot!
Our pleasure!
I appreciate everything QMM does to confirm accuracy of their rifles, anyone that is serious about precision knows, many hours and much knowledge goes into deciphering a load for a particular build......I have the patience, knowledge and components to wring out your 33XC without over shooting your gun.
Dear Sir - rifle has been shipped to customer's receiving FFL dealer in New Jersey. Thanks...........
Of course that 6.5x47 is going to shoot good! It's a Bartlein!!😊 Thank you Sr. for another great video!
Dear Sir - appreciated............thanks.
Looking forward to the next video, thanks guys !!!
Our pleasure!
I don't think we need to be looking at bugs! Poor Vicky
? ? ? ? - thanks.
Nice work. Yeah, I was wondering about your customer. I see you shot the 33 XC some more.. 100 yards and another 5 shot group. I think it is a good barrel and good build. I think the customer will be happy with it once he shoots it. Either way you definitely did your job well. I'm surprised you had to bead blast it all off etc.. and do the duracoat again. A few scratches here or there is fine. I don't even have mine coated anymore. just go with shiny steel then I don't mind if I scrape it. Thank you again for sharing your results.
Dear Sir - I don't think he will shoot it; he saw how much it hurt me and he isn't entering the pain zone. Some young tough guy will probably get a great deal. Thanks..............
Good stuff! Geez that 6.5x47 is a sharp shooter.
Dear Sir - very accurate cartridge. High quality factory ammo. Thanks........
Thanks for the video
Dear Sir - thank you.
Unfortunately, some people want everything for free. I’m new here and I kind of figured out from the get go that .25 accuracy was going to involve some extra man hours , which equates to more money 💰. As it should be . Love your videos . 👍
Dear Sir - thank you. Sometimes LOTS of extra work.
Going out and setting up to test all that is a bit of work and expense.
Dear Sir - more than you know; very costly. Thanks.
Sadly, so many people today are selfish, inconsiderate JERKS (I'm being nice here)! I was wondering if the .33XC 'guy' was going to do 'the right thing' and I now have that answer. It sure looked like you went way above and beyond (anything I would expect anyway) on that build and nada. That's on him. Thanks for bringing us along!
Dear Sir - "do unto others as you would have done unto you." Gratitude may be the greatest of all Character traits. Thanks.............
Dir sir how do I get in touch with you I'm thinking about 7mm on 6.5 prc brass
Dear Sir - our web-site is: Quarter Minute Magnums. Just phone...............thanks.
Hey, 33XC guy (Customer) I'd gladly work up a 3 shot group for you...I'm not afraid to fire 3 shot group, I have the brass, powder, bullets and primers for this gun....I'd be happy to make you feel good about all the work that has been put into this build!!!
Dear Sir - see above comment. Thanks...........
I'm still trying to figure out the purpose/utility of a 33XC to begin with
Dear Sir - 300g bullets at 3,200FPS - if you can shoot it. Thanks....................
@@quarterminutemagnums That's a lot of firepower. Not something I'd want to shoot. My puny 30 cal and 7 cal magnums work fine on moose and elk. I can handle that recoil and even the 338 Edge with a 300gr bullet at 2650fps. I've not hunted anything requiring more than a 30-06 with a 180 grain bullet. My current magnums turned out to be overkill anyway but they shoot extremely well and I like them
Dear Sir - I have killed more game with regular .338 Lapua, using 250g bullets at 2,925; very effective. Thanks.@@Accuracy1st
Just had a 6.5x47 lapua built. Bartlein, Kelblys golden bear, McMillan stock,Nightforce glass. Best five shot group so far with virgin brass.172. Hasn’t shot any group over one half inch.
Dear Sir - excellent! That cartridge shoots! Thanks............
..........and now he doesn't want it ? !
Dear Sir - people often change their preferences when pain is involved. Make him an offer.........................thanks.
If I lived in USA I would ask you for my custom rifles projects
Dear Sir - appreciated...............thanks.
How much for the 33XC?
Dear Sir - I don't know; if you are serious, I could put you in touch with the customer. The rifle is on the way to his receiving FFL dealer now. Let me know............thanks.
Sorry, I spoke too soon. Later I saw where you mentioned it was left handed. @@quarterminutemagnums
Hearing aids?
Dear Sir - good ones are out of my price range. Plus, if I could actually hear the crap coming out of .........well, let's just not go there. Thanks..................