The statement to just buy lights and not kits does not apply to brake lights. The controller only has an adapter for a single brake light. If you want two brake lights you have to buy a Y-splitter separately. It's only US$7 but only one shop in the world had one remaining splitter in stock (Revzilla) and it cost an extra US$40 to ship internationally.
Hey Aditya, You don't need to tap into anything, simply plug the auxiliary brake light into the brake light port. Take a look at these install instructions, there are a few photos which may help you get to the right spot. CanSmart Install Guide: files.twistedthrottle.com.s3.amazonaws.com/Installation%20Instructions/Denali/DENALI%202.0/Instructions_DNL.WHS.11600_rev04.pdf If you are still having trouble, give us a call and chat with one of our Gear Scouts! 855-255-5550 Cheers!
Hi is compatible with GS equipped with BMW Connectivity and TFT Display? In the video I've seen that you use Controller to set the intensity of the light, but with the TFT the Controller is to switch the different page or menù. Thanks
Hi Matteo, It is not controlled through your display, but rather by button sequences on the handlebars. The main settings for the device will be controlled through your computer (where you select your preferences).
bmw Philippines disapproved my warranty claim when the bike's (r1200gs) general module failed pointing to the cansmart as the cause of the failure. your thoughts please. thanks.
Really good video. Thank you. I have a GSA LC Rallye, so I have the tyre pressure system. As I understand your comment, the tyre pressure module ‘piggy-backs’ onto the cansmart connector.
Hey Alain, We do have a version to fit the K16 series bikes. Check it out at the link below. CanSmart Controller: www.twistedthrottle.com/denali-2-0-cansmart-plug-n-play-controller-for-bmw-k1600-series-motorcycles This kit will fit: 2010-2018 BMW K1600GT 2010-2018 BMW K1600GTL 2013-2018 BMW K1600GTL Exclusive 2017-2018 BMW K1600B Bagger Cheers!
Ok. My question is.. I want to install my d7, d4, b6, and soundboom I did purchase all this items from you guys but still waiting for the CANsmart to be available, can I conect all ?
Hi, I’ve connected the Cansmart which has a green flashing light with ignition off and a solid green light when ignition is on. Cannot get B6 Brake lights to work on Cansmart but work with ‘direct’ power. Had Cansmart changed by dealer, still not working. Denali helpline totally useless as they don’t reply. Wishing I’ve never heard of Denali.
Hi Andrew, Have you connected to the software to configure the settings? Be sure that all the settings are correct, as that could cause it not to work. If you need any further assistance please email us at info@twistedthrottle.com and one of our Twisted tech's can help you out. Cheers!
TwistedThrottle.com Hi, Firstly I thought it was plug and play? No I have not connected to the software as I only want the basic functions for the plug and play facilities, Secondly, I was supplied by my dealer , Chainspeed Ltd UK (who told me Twisted are the sole importer into the UK) with another replacement Cansmart. BOTH Cansmart came up with a fault. The exact same fault. After investigation it was proved at my expense that the Pigtail on both Cansmarts for the brake light was faulty in exactly the same place, the white end of the pigtail. Open circuit. Denali installers have told me that this has been an issue in the past who have passed this fault problem to yourself when identified and I have the installers details. Denali have been totally, 100% non existent in replies to assistance as well as the same info I sent to Twisted when I sent 3 requests for assistance. Nothing heard . The ONLY reply for help has been from Revzilla, who said contact Denali, so no constructive help there. But at least it was a reply. I have spent a lot of money on Denali parts and I simply cannot recommend the service or parts in any way. I even had to pay for returning faulty parts.
Good video! I have 2 sets of lights Denali D4's and Denali DR1's which one do I run on the longer CANsmart cable as I see they are different amperages?
You can use the splitter to run both sets on the high power output channels. Just keep in mind you may need to dim the brightest setting just a bit so it doesn't shut the lights off. Or, you can use the simple circuit override to run separate lights on all 4 leads.
@@twistedthrottle at the moment Denali tech support told me to run the D4's on the higher amp leads and the DR1's on the lower. Happy to report that both sets working fine at their max output.
Hey MokumMoto, The design team is waiting to get a test bike in. Not sure on a time frame for that yet, but it is on their radar! We will update our online products once compatibility is confirmed!
Marc does a great job with all of his videos. Very well done.
The statement to just buy lights and not kits does not apply to brake lights. The controller only has an adapter for a single brake light. If you want two brake lights you have to buy a Y-splitter separately. It's only US$7 but only one shop in the world had one remaining splitter in stock (Revzilla) and it cost an extra US$40 to ship internationally.
I'm doing the dual cansmart thing on my Africa Twin. Denali is nothing, but pure awesomeness!
Is there a pre-made cable to go from the cansmart to an SAE connector? I want to also run a connection to my trunk for a USB(s) charging port.
Does this possibly work for the Rebel 1100 as well (same powertrain?) ?
Hello, in case of BMW GS1250 have alarm, the denali must be connected to Alarm or Tyre Pressure system ? thanks in advance
CAn anyone clarify how do I connect can smart controller to laptop ' does the kit have connecting cable in D7 pro kit
Didn't see you connecting to the rear/brake lights. I can't find mine on my 2018 GSA Rallye
Hey Aditya,
You don't need to tap into anything, simply plug the auxiliary brake light into the brake light port. Take a look at these install instructions, there are a few photos which may help you get to the right spot.
CanSmart Install Guide:
files.twistedthrottle.com.s3.amazonaws.com/Installation%20Instructions/Denali/DENALI%202.0/Instructions_DNL.WHS.11600_rev04.pdf
If you are still having trouble, give us a call and chat with one of our Gear Scouts! 855-255-5550
Cheers!
Hi is compatible with GS equipped with BMW Connectivity and TFT Display? In the video I've seen that you use Controller to set the intensity of the light, but with the TFT the Controller is to switch the different page or menù. Thanks
Hi Matteo,
It is not controlled through your display, but rather by button sequences on the handlebars. The main settings for the device will be controlled through your computer (where you select your preferences).
Can all this be connected to a honda nc 750x 2018
bmw Philippines disapproved my warranty claim when the bike's (r1200gs) general module failed pointing to the cansmart as the cause of the failure. your thoughts please. thanks.
Can I install this system in Ducati Multistrada and somehow have this stroboscopic feature??
you mentioned “strobe on horn” functionality but can you configure lights to strobe/modulate all the time?
No, only when horn is activated.
Really good video. Thank you. I have a GSA LC Rallye, so I have the tyre pressure system. As I understand your comment, the tyre pressure module ‘piggy-backs’ onto the cansmart connector.
Thank you for this review... buy this soon. for R1200GS 2018
great gear to have with D4 lights.👍
Will this work on a K 1600 GT ?
Hey Alain,
We do have a version to fit the K16 series bikes. Check it out at the link below.
CanSmart Controller:
www.twistedthrottle.com/denali-2-0-cansmart-plug-n-play-controller-for-bmw-k1600-series-motorcycles
This kit will fit:
2010-2018 BMW K1600GT
2010-2018 BMW K1600GTL
2013-2018 BMW K1600GTL Exclusive
2017-2018 BMW K1600B Bagger
Cheers!
Ok. My question is.. I want to install my d7, d4, b6, and soundboom I did purchase all this items from you guys but still waiting for the CANsmart to be available, can I conect all ?
You can still run all those products with the standard wiring harnesses. Which bike do you have?
TwistedThrottle.com yes I have the 2019 bmw r1250 GSA exclusive
What is the difference between the EZCan and this one ?
Hi Alain,
Check out our video here: th-cam.com/video/6d3bf6ztXWE/w-d-xo.html
Hi,
I’ve connected the Cansmart which has a green flashing light with ignition off and a solid green light when ignition is on. Cannot get B6 Brake lights to work on Cansmart but work with ‘direct’ power.
Had Cansmart changed by dealer, still not working.
Denali helpline totally useless as they don’t reply.
Wishing I’ve never heard of Denali.
Hi Andrew,
Have you connected to the software to configure the settings? Be sure that all the settings are correct, as that could cause it not to work. If you need any further assistance please email us at info@twistedthrottle.com and one of our Twisted tech's can help you out.
Cheers!
TwistedThrottle.com Hi,
Firstly I thought it was plug and play? No I have not connected to the software as I only want the basic functions for the plug and play facilities,
Secondly, I was supplied by my dealer , Chainspeed Ltd UK (who told me Twisted are the sole importer into the UK) with another replacement Cansmart. BOTH Cansmart came up with a fault. The exact same fault.
After investigation it was proved at my expense that the Pigtail on both Cansmarts for the brake light was faulty in exactly the same place, the white end of the pigtail. Open circuit.
Denali installers have told me that this has been an issue in the past who have passed this fault problem to yourself when identified and I have the installers details.
Denali have been totally, 100% non existent in replies to assistance as well as the same info I sent to Twisted when I sent 3 requests for assistance. Nothing heard . The ONLY reply for help has been from Revzilla, who said contact Denali, so no constructive help there. But at least it was a reply.
I have spent a lot of money on Denali parts and I simply cannot recommend the service or parts in any way. I even had to pay for returning faulty parts.
Good video!
I have 2 sets of lights Denali D4's and Denali DR1's which one do I run on the longer CANsmart cable as I see they are different amperages?
You can use the splitter to run both sets on the high power output channels. Just keep in mind you may need to dim the brightest setting just a bit so it doesn't shut the lights off. Or, you can use the simple circuit override to run separate lights on all 4 leads.
@@twistedthrottle at the moment Denali tech support told me to run the D4's on the higher amp leads and the DR1's on the lower. Happy to report that both sets working fine at their max output.
Hi! Any news from Denali on supporting the F750/850 GS?
Hey MokumMoto,
The design team is waiting to get a test bike in. Not sure on a time frame for that yet, but it is on their radar! We will update our online products once compatibility is confirmed!
Kinda like Clearwater lights.
“Done in time for beer”? I thought beer was for drinking while installing stuff like this!