We are thrilled to announce that our first four plug-&-play DialDim kits are now live and available for preorder for the Honda Africa Twin, Tenere 700, H-D Pan America and Gen 3 KLR 650! Keep in mind that you don't need the vehicle-specific harness to install a DialDim on any bike, it just takes out the guess-work of where to hook up to! denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-honda-africa-twin-1100 denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-yamaha-tenere-700 denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-harley-davidson-pan-america-1250 denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-kawasaki-klr-650-gen3
Trying to find install help/guidance for Goldwing 2023 Tour using Denali D7 Pro with DialDim. Nothing yet. Questioning feasibility on newer Goldwing units. Fairing removal and Power Cable routing is.... not looking workable for me.
I am 80% installed on my KTM Adventure 890R. Small detail, but wish you would have shown proper posi-tap use and installation. And can the posi-taps be removed should a vehicle specific harness become available?
How do you know what Amp value to set for your lights? I just bought the D7 pro lights and want to run the center bank of three lights separate from the upper and lower banks of two lights. Then, if I decide to run all seven lights on one circuit, what Amp value should I set for that? Thank-you.
It is amazing. I am trying to decide which one to buy: CANsmart or this DialDim. Is this the same as CANsmart or they work both together? What's the difference?
Tough decision, it really comes down to what bike you are outfitting and what your build goals are. We have put together a quick blog post to try and help out: denalielectronics.com/blogs/blog/denali-dialdim-versus-cansmart-which-is-right-for-me
Hopefully our team got you sorted, but if not we have a quick blog to help you decide: denalielectronics.com/blogs/blog/denali-dialdim-versus-cansmart-which-is-right-for-me
We are hoping to have these ready by quarter 1 of 2022. The DialDim can be run without the plug and play kit, but the kit will make it more convenient.
Wow this is so cool and innovative! Will the Tenere 700 kit work on my new Tracer 9 GT, or are the plugs different? Or will there be a specific Tracer 9 kit soon?
We can't confirm fitment on the Tracer 9 simply because we haven't been able to track one down close to our shop for testing. If you are local to Rhode Island, let us know and we can hook you up in exchange for a day or two in the shop.
I'm just curious, my motorcycle is the same model as in the video, but how to install the switch body on the handlebar position in the video? The original bracket doesn't seem to be able to fit in that position.
Hey Bryce, Our vehicle-specific DialDim for the Africa Twin is now available for pre-order! denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-honda-africa-twin-1100
Hi. Really intrigued by this product. I have a Triumph Tiger Explorer 1200 with LED lights. Have never been able to pick up the (low voltage) high beam signal for my Denali 2.0 D2's as the bike uses Canbus signals. Will the DialDim work on my bike as yo have demonstrated in the video?
It will! There is a chance that you might need an additional relay that we sell, called a trigger wizard. Reach out to our customer service team and we can get a solution that works for your bike: denalielectronics.com/pages/contact-us
Good day, I currently have a Set of DM lights., They have worked great so far, but i do want to add a set of DRL's, would this system be compatible with those lights? For Reference i have a Honda CMX Rebel 1100.
DRLs are compatible with the DialDim Controller and can be wired inline with an existing light set or as one of the 2 channels: denalielectronics.com/collections/led-drl-backup-lights/products/dnl-whs-048
Very nice product indeed, which I do not see if you have also implemented the feature when switching on hazardous lights and the primary lights also blink that you can set the intensity lower. When driving in traffic with blinking D7 at 100% makes the driver very nervous so the ability to also dim this D7 with an extra setting when turning the hazardous feature on in the software would be nice
Absolutely! Wiring is universal and as in-depth as you choose to go. For basic on/off/dim light control, you only need to connect your DialDim to 12V positive, negative, and connect your lights! If you wish to incorporate horn, signal, and high beam functions, simply tap each circuit and enjoy! We are working on plug and play harnesses for popular bikes, but the pnp systems are not required (just a convenience). You can run DialDim on anything with DENALI lights and a 12v battery! If your lights are older 1.0 lights, they might not have dimming control, but all 2.0 DENALI lights should work with the DialDim.
For 2016 Honda NC700XD US version I want to buy D4 LED Light Pods with DataDim™ Technology, what else I have to buy? such as wiring , switch, etc.. I need something simple just to work with low beam and high beam of my original headlight.
You will need our powersports harness and a datadim module: denalielectronics.com/collections/driving-light-wiring/products/dnl-whs-10900?variant=15068475949156 denalielectronics.com/collections/driving-light-wiring/products/dnl-whs-11000?variant=15068467363940
I bought a Denali d7 and a dialdim controller . One light is working with the dialdim feature and the other light doesn't switch on . What should I do ?
We don't currently offer a plug and play harness for that model, but the DialDim does work out of the box for your scooter. You simply tap the signals, high beam, and horn wires with included posi-taps and all smart functions are enabled. Even without the leads tapped, the DialDim will still control and dim two light sets.
Technically speaking, all LEDs flicker constantly but you shouldn't be able to see D4s flicker with the human eye. Reach of to our Customer Service team for some troubleshooting help: denalielectronics.com/pages/contact-us
The biggest differences are the universal application of the DialDim and the visual feedback from the controller. The DialDim can be installed on basically any vehicle with lights and a 12V battery. The CANsmart obviously can only be installed on the models that have CANbus systems and have a CANsmart module developed for it. The DialDim is perfect for any bike, especially those without a CANsmart available. That said, there is a lot of customization available inside the software of the CANsmart that can't be achieved on the DialDim. The DialDIm provides instant visual feedback for which light set you are controlling and what level your lights are at. With the CANsmart, you do not have a "display" to show you the levels of the various light sets, whether they are on/off, etc. All of that is controlled through the OEM controls and typically a rider has to look at his/her lights to know for sure what they are doing.
Wiring is universal and as in depth as you choose to go. For basic on/off/dim light control, you only need to connect your DialDim to 12V positive, negative, and connect your lights! If you wish to incorporate horn, signal, and high beam functions, simply tap each circuit and enjoy! We are working on plug and play harnesses for popular bikes, but the pnp systems are not required (just a convenience). You can run DialDim on anything with DENALI lights and a 12v battery!
I can see companies like Denali developing turn/lean lights due to modern motorcycles increasingly incorporating IMU sensors that know when and how far the bike is leaning in 3D space. I could see a programmable circuit that kicks on corner lights at a present lean angle on IMU equipped bikes being a thing. Manufacturers are already doing this on some expensive motorcycles, but I am assuming with limited visibility to see around curves. OEM lighting is often very much an exercise in frustration. All one would need is a trigger wire from an IMU canbus circuit to illuminate cornering lights. User could adjust those to point out/up at whatever angle they require by use.
@@DENALIElectronics. Thanks for the reply . I have Denali D2 now. But I want the Denali D3 too. And dialdim So I have to wait until I can buy them in Sweden👍🏻
Nice set ups for the AT and indeed Interesting that all this is possible BUT I'm just riding a motorcycles not piloting the space shuttle HAHAHAHA way too complex for my aging Grey MatterHAHAHAHA... The AT's bundle of switches and settings is already enough over kill........ All I really want is a set of FLASHING BRIGHT LIGHT during the day and a SOLID BRIGHT LIGHT at night thats wired through my AT key switch. ..... Do you have a harness for this ?
Flashing front lights are typically illegal in most countries and states as they mimic emergency vehicles, we do not offer any harness or controller with a constant flash for this reason. I would install the DialDim with one conspicuity light set on all the time and a second set that you flip on with your high beam switch. Once you set the DialDim with these settings, you don't need to activate them each time you ride and you won't need any additional harness as it is all contained in the DialDim harness.
As of right now, it is not on our plate for the first part of 2023. We are in talks with a potential ambassador to develop some products for that specific motorcycle, potentially later this year.
I have a question regarding the Hi beam relay. How long do you think the relay will last if you have the coil working all the time to convert to positive trigger?
I just send my order but damn got a question 😱 i got the dialdim in order, when It comes in i Need to cable the datadim from my D4 or i dont need no more? Last question and im a Little scared about It 😅... I Need the wizard kit too for my KTM 1290S 2020? Or the Dialdim wanna do the job alone ?✌🏻
@@DENALIElectronics oh nice! I Will try ti wait my second order with soundbomb, cable and Mount, a new pair of auxiliary lights and wizard 🤣😅. Really THX once more for the care u have with your customer ✌🏻✌🏻✌🏻✌🏻
Very nice, I have Denali lights on both my Moto Guzzi, they are quality stuff. However, the small lights don't have so much power that need dimming. Not worth tearing the bike apart for all these wires because you do need them at full intensity. Their larger lights....may be a different story though.
You have a point if you are using small lights simply for conspicuity. The smart features like flash with signal and flash on horn are worth the DialDim upgrade IMHO, especially on a bike that doesn't have a CANbus system.
We haven't developed a plug-&-play harness for the Multistrada, but you don't need one. The product is 100% universal and can be connected to your Ducati using the provided posi-tap connectors.
Hello, I really need help connecting the DialDim that I installed on my Multistrada V4s. I was able to connect all the wires except the blue because I can't find the wire that controls the high beams. thank you very much
We haven't developed a plug-&-play harness for the Triumph Tiger 1200, but you don't need one. The product is 100% universal and can be connected to your Tiger using the provided posi-tap connectors.
The Tiger 900 is on our development list for future applications. As soon as we can get one into our shop in Rhode Island, we will begin the process. Let us know if you know someone in the area with a 2020-present Tiger 900 that would let us prototype using their bike in exchange for some DENALI goods!
We haven't developed a plug-&-play harness for the AT 1000, but you don't need one. The product is 100% universal and can be connected to your Honda using the provided posi-tap connectors.
Yes! It is completely universal so it will work with the Tenere 700 out of the box. We did however develop a plug-&-play harness for the Tenere which will be available in January 2022.
Unfortunately I think a lot of people on here think this is very DIY, when really it's pro-lite or ethusiast-advanced. If you've never done this before your best option unfortunately is to have it professionally installed. If you don't know what a wire tap is that's a good sign you should not attempt yourself.
While we are glad that this setup works for you, the DialDim only requires 3 wires minimum to control lights. Simply connect fused 12V positive, negative, and your lights and you are good to go.
We have not tested the DialDim to work on different generations of the AT just yet. It is our educated guess that it will not plug right in. The universal DialDim works flawlessly on the older AT's, however!
![The Wall Song ร้องข้ามกำแพง | EP.215 | พาเวล นเรศ - พูห์ กฤติน | 17 ต.ค. 67 [1/5]](http://i.ytimg.com/vi/IUzrjuf60P4/mqdefault.jpg)
We are thrilled to announce that our first four plug-&-play DialDim kits are now live and available for preorder for the Honda Africa Twin, Tenere 700, H-D Pan America and Gen 3 KLR 650! Keep in mind that you don't need the vehicle-specific harness to install a DialDim on any bike, it just takes out the guess-work of where to hook up to!
denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-honda-africa-twin-1100
denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-yamaha-tenere-700
denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-harley-davidson-pan-america-1250
denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-kawasaki-klr-650-gen3
Can this controller be used with any LED aux lights for motorcycles?
Any plans for a solution for the Ducati Multistrada V4?
Hello do you have for Honda Xadv750 ?
im upset you havent done any BMW 1250s 21+
Shame that they dont answer comments about their products.
Plan to do africa twin 2024 aswell for this?
Watched again.... "It is that easy....". Yes. Easy to purchase......
Yea dude. Buying this is a NIGHTMARE. They dont tell me all the stuff i need if i want a specific function. Also want a set of all needed stuff
I ride a Multistrada Rally. Does installing the DialDim requires any wire splicing? Thanks.
Trying to find install help/guidance for Goldwing 2023 Tour using Denali D7 Pro with DialDim. Nothing yet. Questioning feasibility on newer Goldwing units. Fairing removal and Power Cable routing is.... not looking workable for me.
how do we mount the Diam between the Africa Twin Left Side Control Panel and the mirror mount? The supplied DialDim bracket just wont fit between.
I am 80% installed on my KTM Adventure 890R. Small detail, but wish you would have shown proper posi-tap use and installation. And can the posi-taps be removed should a vehicle specific harness become available?
Thanks for the suggestion, we will work to show more of the posi-connectors in future videos.
It’s mind blowing how limited the resources are.
I just ordered one with the D7 package last week with plans of adding them to my Rebel 1100T. I used the Cansmarts on my Africa Twin.
Can we stalled the d4 or d3 in vespa/lambretta scooters?
Do you do a Pacific one for a Kawasaki Ninja 1000SX 2022 year can you let me know thank you 👍🏍️
How do you know what Amp value to set for your lights? I just bought the D7 pro lights and want to run the center bank of three lights separate from the upper and lower banks of two lights. Then, if I decide to run all seven lights on one circuit, what Amp value should I set for that? Thank-you.
It is amazing. I am trying to decide which one to buy: CANsmart or this DialDim. Is this the same as CANsmart or they work both together? What's the difference?
Tough decision, it really comes down to what bike you are outfitting and what your build goals are. We have put together a quick blog post to try and help out: denalielectronics.com/blogs/blog/denali-dialdim-versus-cansmart-which-is-right-for-me
Is there a Plug and play for 2016 Africa Twin 1000.
I will be calling your guys on Monday. Between this and the D3 I want to purchase both but not sure if I need the canbus system.
Hopefully our team got you sorted, but if not we have a quick blog to help you decide: denalielectronics.com/blogs/blog/denali-dialdim-versus-cansmart-which-is-right-for-me
Hi, when approx do you plan to offer for sale the featured Africa Twin CRF1100 Plug & Play kit?
We are hoping to have these ready by quarter 1 of 2022. The DialDim can be run without the plug and play kit, but the kit will make it more convenient.
Wow this is so cool and innovative! Will the Tenere 700 kit work on my new Tracer 9 GT, or are the plugs different? Or will there be a specific Tracer 9 kit soon?
We can't confirm fitment on the Tracer 9 simply because we haven't been able to track one down close to our shop for testing. If you are local to Rhode Island, let us know and we can hook you up in exchange for a day or two in the shop.
Can i install it on suzuki vstorm ?
I'm just curious, my motorcycle is the same model as in the video, but how to install the switch body on the handlebar position in the video? The original bracket doesn't seem to be able to fit in that position.
The switch is attached to the OEM controls with VHB automotive tape.
Consider one sold as soon as you have a 2021 Africa twin adventure sport wire harness in stock.
Looks amazing.
We are so very close to having that option available!
I just ordered the Dialdim on backorder but will wait until the 21 ATAS wire harness is ready as well.
Hey Bryce, Our vehicle-specific DialDim for the Africa Twin is now available for pre-order! denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-honda-africa-twin-1100
Someone can maybe help me? Got dialdim with 4 denali lights and all works but not the hi beam features on ktm1290 adv S (my2019) any suggestion plz???
wow...seems like 70% dream come true of such device. I have few more suggestions how can i approach you guys?
Hi Mani, we always welcome feedback and suggestions. You can send an email to info@denalielectronics.com
Hi. Really intrigued by this product. I have a Triumph Tiger Explorer 1200 with LED lights. Have never been able to pick up the (low voltage) high beam signal for my Denali 2.0 D2's as the bike uses Canbus signals. Will the DialDim work on my bike as yo have demonstrated in the video?
It will! There is a chance that you might need an additional relay that we sell, called a trigger wizard. Reach out to our customer service team and we can get a solution that works for your bike: denalielectronics.com/pages/contact-us
I want support in India- controller not functioning properly on my bike unable to sort it out
Good day, I currently have a Set of DM lights., They have worked great so far, but i do want to add a set of DRL's, would this system be compatible with those lights? For Reference i have a Honda CMX Rebel 1100.
DRLs are compatible with the DialDim Controller and can be wired inline with an existing light set or as one of the 2 channels: denalielectronics.com/collections/led-drl-backup-lights/products/dnl-whs-048
Very nice product indeed, which I do not see if you have also implemented the feature when switching on hazardous lights and the primary lights also blink that you can set the intensity lower. When driving in traffic with blinking D7 at 100% makes the driver very nervous so the ability to also dim this D7 with an extra setting when turning the hazardous feature on in the software would be nice
This feature will likely be available on the CANsmart module for the Africa Twin, coming soon.
Can you showcase with PanAmerica
can this lighting control work on my honda Varadero 125 which has Denali DR1 lights and Denali DM lights
Absolutely! Wiring is universal and as in-depth as you choose to go. For basic on/off/dim light control, you only need to connect your DialDim to 12V positive, negative, and connect your lights! If you wish to incorporate horn, signal, and high beam functions, simply tap each circuit and enjoy! We are working on plug and play harnesses for popular bikes, but the pnp systems are not required (just a convenience). You can run DialDim on anything with DENALI lights and a 12v battery! If your lights are older 1.0 lights, they might not have dimming control, but all 2.0 DENALI lights should work with the DialDim.
I bought DialDim lightining controller universal kit, how can i connect it to the hight beam? What adapter do i need for bmw gs1250 2022? please help
The high beam is the only function of the DialDim that you cannot use with on the 1250. BMW is touchy with their high-beam signals.
For 2016 Honda NC700XD US version I want to buy D4 LED Light Pods with DataDim™ Technology, what else I have to buy? such as wiring , switch, etc.. I need something simple just to work with low beam and high beam of my original headlight.
You will need our powersports harness and a datadim module:
denalielectronics.com/collections/driving-light-wiring/products/dnl-whs-10900?variant=15068475949156
denalielectronics.com/collections/driving-light-wiring/products/dnl-whs-11000?variant=15068467363940
I bought a Denali d7 and a dialdim controller . One light is working with the dialdim feature and the other light doesn't switch on . What should I do ?
You should give us a call and one our experienced techs can help you diagnose the situation: +1 401 360 2550
Hi indeed plug and play connector for DialDim to Honda XADV 2022
Can someone suggest where can I buy or how can I make myself.
Thank you.
We don't currently offer a plug and play harness for that model, but the DialDim does work out of the box for your scooter. You simply tap the signals, high beam, and horn wires with included posi-taps and all smart functions are enabled. Even without the leads tapped, the DialDim will still control and dim two light sets.
How did you mount the switch so close to the buttons? With supplied holder is not possible..
yeah, puzzled myself too. But can't seem to find a solution. Did you manage to figure out how? Care to share if so?
Pretty cool new product. What about the Can Smart for the Africa Twin ? Are you guys working on it?
We are, and we hope to have a solution out by the end of the year.
@@DENALIElectronics Thank you for the answer.
I just have a question is it normal that the d4’s flicker when dial dim is set to only about 30%? Thanks
Technically speaking, all LEDs flicker constantly but you shouldn't be able to see D4s flicker with the human eye. Reach of to our Customer Service team for some troubleshooting help: denalielectronics.com/pages/contact-us
What’s the difference between this and the canbus controller you sell? Any features one offers more than the other?
The biggest differences are the universal application of the DialDim and the visual feedback from the controller.
The DialDim can be installed on basically any vehicle with lights and a 12V battery. The CANsmart obviously can only be installed on the models that have CANbus systems and have a CANsmart module developed for it. The DialDim is perfect for any bike, especially those without a CANsmart available. That said, there is a lot of customization available inside the software of the CANsmart that can't be achieved on the DialDim.
The DialDIm provides instant visual feedback for which light set you are controlling and what level your lights are at. With the CANsmart, you do not have a "display" to show you the levels of the various light sets, whether they are on/off, etc. All of that is controlled through the OEM controls and typically a rider has to look at his/her lights to know for sure what they are doing.
Thanx for the info.
@@DENALIElectronics So in other words I would have to get rid of my Cansmart in order to install the DialDim???
Is there a wiring setup for the Honda Rebel 1100?
Wiring is universal and as in depth as you choose to go. For basic on/off/dim light control, you only need to connect your DialDim to 12V positive, negative, and connect your lights! If you wish to incorporate horn, signal, and high beam functions, simply tap each circuit and enjoy! We are working on plug and play harnesses for popular bikes, but the pnp systems are not required (just a convenience). You can run DialDim on anything with DENALI lights and a 12v battery!
I can see companies like Denali developing turn/lean lights due to modern motorcycles increasingly incorporating IMU sensors that know when and how far the bike is leaning in 3D space. I could see a programmable circuit that kicks on corner lights at a present lean angle on IMU equipped bikes being a thing. Manufacturers are already doing this on some expensive motorcycles, but I am assuming with limited visibility to see around curves. OEM lighting is often very much an exercise in frustration.
All one would need is a trigger wire from an IMU canbus circuit to illuminate cornering lights. User could adjust those to point out/up at whatever angle they require by use.
Thanks for your feedback! We will pass on your comments to our design team!
@@DENALIElectronics Well I appreciate that very much!
Hi. What kind of bracket are the big lamps on?
That is our new mount for the Africa Twin...stay tuned!
@@DENALIElectronics. Thanks for the reply . I have Denali D2 now. But I want the Denali D3 too. And dialdim So I have to wait until I can buy them in Sweden👍🏻
Is it possible to turn on a strobe mode without using a horn?
That function is not currently available on the DialDim. I have passed on your comment to our design team for consideration.
Do you have an install video with Yamaha T7?
This is about as close as we have to an install on the T7: th-cam.com/video/swalmZqL-vc/w-d-xo.html
Nice set ups for the AT and indeed Interesting that all this is possible BUT I'm just riding a motorcycles not piloting the space shuttle HAHAHAHA way too complex for my aging Grey MatterHAHAHAHA... The AT's bundle of switches and settings is already enough over kill........ All I really want is a set of FLASHING BRIGHT LIGHT during the day and a SOLID BRIGHT LIGHT at night thats wired through my AT key switch. ..... Do you have a harness for this ?
Flashing front lights are typically illegal in most countries and states as they mimic emergency vehicles, we do not offer any harness or controller with a constant flash for this reason. I would install the DialDim with one conspicuity light set on all the time and a second set that you flip on with your high beam switch. Once you set the DialDim with these settings, you don't need to activate them each time you ride and you won't need any additional harness as it is all contained in the DialDim harness.
Any plans to develop a plug and play harness for the Aprilia Tuareg?
As of right now, it is not on our plate for the first part of 2023. We are in talks with a potential ambassador to develop some products for that specific motorcycle, potentially later this year.
I have a question regarding the Hi beam relay. How long do you think the relay will last if you have the coil working all the time to convert to positive trigger?
Been using relays on my bikes for years they will last you years no problem
I just send my order but damn got a question 😱 i got the dialdim in order, when It comes in i Need to cable the datadim from my D4 or i dont need no more? Last question and im a Little scared about It 😅... I Need the wizard kit too for my KTM 1290S 2020? Or the Dialdim wanna do the job alone ?✌🏻
I just checked with our design team and it seems like you are good to go with your DialDim!
@@DENALIElectronics oh nice! I Will try ti wait my second order with soundbomb, cable and Mount, a new pair of auxiliary lights and wizard 🤣😅. Really THX once more for the care u have with your customer ✌🏻✌🏻✌🏻✌🏻
I don’t understand why you (The rider) has to set fuse size .
Very nice, I have Denali lights on both my Moto Guzzi, they are quality stuff. However, the small lights don't have so much power that need dimming. Not worth tearing the bike apart for all these wires because you do need them at full intensity. Their larger lights....may be a different story though.
You have a point if you are using small lights simply for conspicuity. The smart features like flash with signal and flash on horn are worth the DialDim upgrade IMHO, especially on a bike that doesn't have a CANbus system.
@@DENALIElectronics Thank you for the explanation.
It’s that easy? You didn’t show the installation of the wiring which is the most interesting regarding installation !
Hello everybody , is there a specific cable for the ducati multistrada V4s?
Thank you for your answers
We haven't developed a plug-&-play harness for the Multistrada, but you don't need one. The product is 100% universal and can be connected to your Ducati using the provided posi-tap connectors.
@@DENALIElectronics thank you
Hello, I really need help connecting the DialDim that I installed on my Multistrada V4s. I was able to connect all the wires except the blue because I can't find the wire that controls the high beams. thank you very much
Awesome! how soon will a kit for 2019 Triumph Tiger 1200 be available ?
We haven't developed a plug-&-play harness for the Triumph Tiger 1200, but you don't need one. The product is 100% universal and can be connected to your Tiger using the provided posi-tap connectors.
@@DENALIElectronics my Triumph dealer sadly, disagrees and says its not possible to get a switched 12v feed from the headlight owing the the canbus
Great product and great video!
Thanks so much!
Can I install this on Bajaj dominar 400
Yes, the DialDim can be installed on any motorcycle with a 12V battery!
Any plans to have a harness for the Tiger 900?
The Tiger 900 is on our development list for future applications. As soon as we can get one into our shop in Rhode Island, we will begin the process. Let us know if you know someone in the area with a 2020-present Tiger 900 that would let us prototype using their bike in exchange for some DENALI goods!
@@DENALIElectronics Well I’m down in Florida but I’d be willing to part with the bike for a while if it helps the cause. Let me know.
What about the 1000 model?
We haven't developed a plug-&-play harness for the AT 1000, but you don't need one. The product is 100% universal and can be connected to your Honda using the provided posi-tap connectors.
@@DENALIElectronics I hope you develop that for the CRF 1000,We're going to win these benefits, and you're going to make money.
Will this work with tenere 700 ?
Yes! It is completely universal so it will work with the Tenere 700 out of the box. We did however develop a plug-&-play harness for the Tenere which will be available in January 2022.
looks amazing👏
Thank you for the kind words, we are extremely excited to bring this product to market!
Unfortunately I think a lot of people on here think this is very DIY, when really it's pro-lite or ethusiast-advanced. If you've never done this before your best option unfortunately is to have it professionally installed. If you don't know what a wire tap is that's a good sign you should not attempt yourself.
20 A = 20 Ampere? Africa battery is 6A? Mah
Fantastic!!!!!!!!
Thank you! Cheers!
Too many wires!
I bonded 2 traditional hellla ff50s to my high beam, pretty simple, primitive but damn effective
While we are glad that this setup works for you, the DialDim only requires 3 wires minimum to control lights. Simply connect fused 12V positive, negative, and your lights and you are good to go.
Why is there a Yamaha tenere 700 and then all of a sudden it's a africa twin🤦♂️🤷♂️
Ah the joys of having multiple bikes in the shop at once 🤙🏼
You would probably wreck bye the time u done messing with tis thing
Great product. No resources at all. And I mean NONE.
What do you mean?
Will the plug and play work for 2019 Honda African Twin 1000 ?
We have not tested the DialDim to work on different generations of the AT just yet. It is our educated guess that it will not plug right in. The universal DialDim works flawlessly on the older AT's, however!