Definitely came out nice but I think I would have left the colors in the emblems n just tried to do a chrome delete on the emblems. But again nice job man.
You may know by now but Plastidip comes in Glossy black now which is more of a Satin finish right out of the can, its a gamechanger for these jobs. Also putting cans in warm water for 10 mins before using is essential for a smooth result.
I always dig the clean badgeless look. Whenever I take off emblems or lettering I use a heat gun though. Softening up the adhesive really helps to have more of it come off on the initial removal.
This doesn't work for all cars. When you remove the emblem your left with indentations of the badge in the body. You would have to bondo fill it in otherwise it looks dumb. You would then have to paint it. It's alot of work for a stupid little emblem. Be proud of what you drive or buy something better. Lol
@@mattferrigno9750 Wtf no? Also most german cars can be option with no badge and it usually never a matter of cost. On all cars ESPECIALLY with highest option a always de-badge. Unfortunately so many people are jealous. It also looks way cleaner, those who knows will know i guess. On shitboxes i keep the badge. I'm proud to have the lowest option :D
@@mattferrigno9750 that's on the manufacturer for recessing the lettering into the body panel, which is an utter pain in the ass and completely unnecessary. For example, the rear badging for my Fiesta is just stuck on, it can be taken off with a heat gun. The front badge however is held onto the grille. You CAN remove the Ford badge, but then you're left with the indentation where its meant to be. Solution? Debadged grilles exist, plus they're metal and not plastic.
@@CajunReaper95 yes, i know a few people in specific to Fiestas who've had custom body panels done to completely smooth out where the rear Ford badge is Looks pretty sick imo
They won't do it because technically you've now made your car illegal to drive on the road. All cars must have orange reflectors in the front and red in the rear. It does look good, but just not worth the hassle if you live in a state with inspections.
Your head lights and tail lights have reflectors in them. No point in being internet osha.. I think he'll be alright. It's not like he blacked out his tail lights or something..
@@Wmoore1 headlights don't have reflectors for external light. LED tail lights require separate reflectors. Either way, those apply to light front and rear, not from the side. The purpose of side reflectors is to see where the vehicle ends and begins at night from a side profile
I don't know if anyone's said this but you get less orange peel with either brand if you soak the can in hot water and warm the chemicals up. Do it even if it's been in a hot garage. This tip works well with and rattle can spray paint too. I'm glad I was just recommended this channel! Thank you TH-cam and subbed!
@@ZeroToAwesome no problem! I've been watching your vids and you should be getting a lot more views! You are doing things (in your vids) some of the best ways on the internet! I'm glad to have found ya. lol.
There is legit a monochrome badge option. It might be sport 2 or something. My sister just ordered one. It was some specific package. Badges come black and silver, no other colors. Couldn't imagine spray painting a $120k suv
The onyx package will also black out the other badging and change the wheels to different black wheels. I don't really care for those so I hunted for one without the onyx package. I found a sport platinum that i liked and after agreeing on a price, I asked the dealer to monochrome/ black out all the badges and emblems to close the deal and they agreed. No regrets, I love it!
No chance of removing the paint this way either… The only issue I have with doing it this way is the risk of having the adhesive remover drip and dwell on any panel that you wouldn’t want it affecting.
Beautiful vehicle. FYI, Goof Off is fine on automotive paint. Using a strong adhesive remover is actually easier and faster because you're not working so hard to remove the adhesive, so you're leaving behind fewer scratches and micromarring. FWIW, I use a bit of heat (although a bright sunny day is usually sufficient) and a plastic putty knife, along with the adhesive remover.
FYI. Good off and most solvents will not affect base coat/clear coat. Clear coat is an epoxy type off paint. Instead of using a solvent to change the physical properties of the paint, it uses a harder to chemically change the coat.
In their defense, the Cadillac emblem is silver, not black. If they sent it with the front emblem black, it wouldn't be their logo which is copyright protected.
@@chrysler748 that's true. After writing this comment I saw that the new lyriq is going to be coming with the silver caddy emblem so maybe they're just late to the party.
Side reflectors are there because of stupid government regulations. Like Tom said, they aren't required in Europe and they have been doing just fine. If people cant see a car at night while their headlights are on, they shouldn't be driving.
Great video I do the same thing I removed any badges of the dealership because when I look at it I’m driving around with their name giving them free advertisement now if they want to pay me I’ll keep them on there
LOVE this I thnk I will try this method of peelable paint once I have my car detailed. Thansk for showing how much more awesome it looks without the badging!
Good video!!!! As soon as my new car gets it, I'm goin do to the badges and tint the side markers. I wish they did offer the blacked out badges with the black out, grill options.
When I saw the first Escalade in the early 00's I thought to myself "This is the vulgar expression of a gangster" now It looks like a big fridge with wheels
8:50 Pro-tip, use multiple layers of blue painters tape as close as you can around the emblems. Many of these emblems have VERY sharp corners and can gouge your paint. Secondly, you can use a blowdryer or heat gun (careful not to mess up paint) and they come off much easier.
Be careful with letting the goo gone and goof off sit for too long, I’ve had the Goo Gone actually take paint off my car on accident. Luckily it was my shitbox EK Civic but I didn’t realize that there was Goo Gone that dropped down the trunk and bumper and it actually bubbled my paint a little bit then a week later paint started chipping off, so I had to take the bumper off and paint it with black and then clear coated it
So I just bought the black covers for the front and rear emblems, they have like an American flag design which I like. I didn't even think about the reflectors, definitely going to try that this weekend. As for the side emblems I just took those off, once you painted them, you couldn't really see them anymore. Looks great though. Mine is black unfortunately, dealership kept marking up the white ones.
Way easier to use a heat gun, you can buy one at Lowe's for 20 bucks, decals will pop off taking the glue off with them, I debaged my brother's 2022 Escalade and my 2021 750i and it took me 10 minutes to do both cars.
I think I would want to use Steel it to black out emblems. I have used the tint to black out lights. It was easier for me to black out emblems where you have to stretch the tint. The clips will be priceless when Baby Awesome is a teenager! Great video!
Good deal, I’m blacking out my suv decals as well A good adhesive remover aka the best is in a red/silver can and believe it’s the 3m brand it’s like $40 a can but works 10x faster than goo gone Is it safer I’m not sure. But I used that stuff to remove graphics at my old job.
I remember when I bought my 15 Hyundai Genesis back in 17. I politely asked the dealer to take anything and everything that had their name on the car. I stated "you don't pay me to advertise. Strip it" 🤣
Great video! I de-badge all of my cars including the wife’s. We recently bought her a new white 350 f-sport Lexus from Sewell, I debaged it AT the stealership (with dental floss) and gave it to the salesman… lol. Wrapped the window trim in gloss black.
@@ZeroToAwesome He was just standing there looking like “I know this guy is not removing the badges HERE, in front of me”. He KNEW it was actually happening when I dropped ‘em in the palm of his hands, told him “thanks again”, and drove off!
Any recommendations or websites on how to change the interior wood trim? I have a sport platinum and i hate that gloss woodgrain. I prefer the black woodgrain on the regular sport. I wish they had like a carbon fiber option or a open pore wood. That shinny wood sucks
Woulda glanced at that on the street and thought it was a suburban after the changes. Kinda Defeats the purpose of paying extra for an escalade ... lol
Great video. Could you elaborate on the side marker removal? I unclipped the electrical but unsure how to separate the white clips from the actual orange side marker. Thanks!
There’s a little tab on the white clip facing the front of the car that you can’t really see. Press it down and then the white tab slides out towards the wheel well
I moved to Colorado and I just can’t believe how all dealers badge cars here. You pay $40,000 and up for a vehicle and some dealer puts their stupid dealer badging on the back of EVERY SINGLE VEHICLE…. and usually crooked.
And nobody removes them. I think it looks super dumb when you pay 40-60+ grand on your top trim car to have a big chrome (insert dealer name) sticker on the rear of your car. First thing I do when I roll off that dealership lot is remove that thing even before I get home
Just take the rear reflectors and the side markers off and spray paint them white to match 🤣😂 that’s what I did with my civic. It was a 9th Gen civic si coupe so it had 2 giant reflectors like 6 inches under the tail lights, since I was going with a black and green color scheme like monster, I took those reflectors off and spray painted them like green, also I tinted the tail lights with the Vivvid Vinyl Hexagon holographic and the shit looked amazing. I was gonna tint my head lights but I decided against it and eventually took my headlights off and opened them to delete the orange plastic inside the headlight. Shit looked absolutely amazing. I love vinyl wrapping and doing cool custom things like that. If there was more of a business need for it, I would go after doing the custom little stuff, but there’s no way a business can survive on the custom SMALL things, so I always look for the little things to do all the time, I even go do it for my friends and they pay me to get the little things off, take them home and paint them or vinyl wrap them, then I go back when the parts are ready and install them back into the car. We all know doing the little pieces is annoying and a lot of people hate it, but I enjoy it. So if anyone wants, y’all can send me the little things or if you live in Florida, you can pay me and I’ll come do the little things for you lol. That goes for anyone 😂🤣
I use a hair dryer on emblems and text on the car. I used it on my Porsche Turbo emblem and it worked great. It softens the glue so you can just peel it off. Hit it with Goo Gone and your done.
Looks nice, but I would have seen if I could get a small piece of white vinyl for the amber Reflectors (you didnt mention if you did look or not), if not then did the black, at least in this case.
I think if you just sprayed the silver part 04:50 and keep the flag colors inside it will be more cool :)
Thats what i think too. All black made it look ugly and cheap
Instantly thought that
Dido
Completely agree
For sure
Definitely came out nice but I think I would have left the colors in the emblems n just tried to do a chrome delete on the emblems. But again nice job man.
Join us next year on “Zero to Awesome”when I black out the Spirit of Ecstasy on my Rolls Royce Cullinan… lol
Don’t worry we would do at least 10 coats on something that nice!
No s**t!🤣🤣🤣✌
@@ZeroToAwesome I'll rather have some hyper silver rims than the black rims?
You may know by now but Plastidip comes in Glossy black now which is more of a Satin finish right out of the can, its a gamechanger for these jobs. Also putting cans in warm water for 10 mins before using is essential for a smooth result.
This comment and tip -- cans in warm water -- is just fantastic. Just great, free advice. Much appreciated.
I always dig the clean badgeless look. Whenever I take off emblems or lettering I use a heat gun though. Softening up the adhesive really helps to have more of it come off on the initial removal.
This doesn't work for all cars. When you remove the emblem your left with indentations of the badge in the body. You would have to bondo fill it in otherwise it looks dumb. You would then have to paint it. It's alot of work for a stupid little emblem. Be proud of what you drive or buy something better. Lol
@@mattferrigno9750 Wtf no? Also most german cars can be option with no badge and it usually never a matter of cost. On all cars ESPECIALLY with highest option a always de-badge. Unfortunately so many people are jealous. It also looks way cleaner, those who knows will know i guess.
On shitboxes i keep the badge. I'm proud to have the lowest option :D
@@mattferrigno9750 that's on the manufacturer for recessing the lettering into the body panel, which is an utter pain in the ass and completely unnecessary.
For example, the rear badging for my Fiesta is just stuck on, it can be taken off with a heat gun.
The front badge however is held onto the grille. You CAN remove the Ford badge, but then you're left with the indentation where its meant to be. Solution? Debadged grilles exist, plus they're metal and not plastic.
@@Xfacehack Amazon actually sells a very nice little chrome badge that reads "ShitBox Edition".
@@CajunReaper95 yes, i know a few people in specific to Fiestas who've had custom body panels done to completely smooth out where the rear Ford badge is
Looks pretty sick imo
Such a good job, I think they should come like this from the factory. Excellent work!
They won't do it because technically you've now made your car illegal to drive on the road. All cars must have orange reflectors in the front and red in the rear. It does look good, but just not worth the hassle if you live in a state with inspections.
The reflector tint is kinda dumb tbh, those are legitimately useful in low visibility
Your head lights and tail lights have reflectors in them. No point in being internet osha.. I think he'll be alright. It's not like he blacked out his tail lights or something..
@@Wmoore1 the tail lights barely reflect any light, especially on that escalade. Those reflectors work really good
@@Wmoore1 headlights don't have reflectors for external light. LED tail lights require separate reflectors. Either way, those apply to light front and rear, not from the side. The purpose of side reflectors is to see where the vehicle ends and begins at night from a side profile
@@Wmoore1 essentially he did. The reflectors are not in his headlamps that's why it's on the side, and he chose to paint over them.
It's fun seeing so many people trying to tell you what to do with a vehicle you own. Looks great.
I don't know if anyone's said this but you get less orange peel with either brand if you soak the can in hot water and warm the chemicals up. Do it even if it's been in a hot garage. This tip works well with and rattle can spray paint too.
I'm glad I was just recommended this channel!
Thank you TH-cam and subbed!
Thanks for the tip!
@@ZeroToAwesome no problem! I've been watching your vids and you should be getting a lot more views! You are doing things (in your vids) some of the best ways on the internet!
I'm glad to have found ya. lol.
Holy shit! It really makes a big difference. Looks so much better now
I love this kid reminds me of when my son was little great job Sir
Nice job! Looks incredible! The wheels have got to go through!
Amazing how much the little details make a difference
There is legit a monochrome badge option. It might be sport 2 or something. My sister just ordered one. It was some specific package. Badges come black and silver, no other colors. Couldn't imagine spray painting a $120k suv
correct, I have the platinum sport and it comes with silver and grey emblem. I couldn't imagine either spray painting a car at that price either.
The onyx package will also black out the other badging and change the wheels to different black wheels. I don't really care for those so I hunted for one without the onyx package. I found a sport platinum that i liked and after agreeing on a price, I asked the dealer to monochrome/ black out all the badges and emblems to close the deal and they agreed. No regrets, I love it!
A much safer way to remove the rear lettering is to heat the adhesive using a hair dryer. No chance of removing paint that way
No chance of removing the paint this way either… The only issue I have with doing it this way is the risk of having the adhesive remover drip and dwell on any panel that you wouldn’t want it affecting.
Awesome video and very informative... I'm about to do this to my wife's 2017 escalade and my 07 Ext Escalade... and I live in Tx..
Beautiful vehicle. FYI, Goof Off is fine on automotive paint. Using a strong adhesive remover is actually easier and faster because you're not working so hard to remove the adhesive, so you're leaving behind fewer scratches and micromarring. FWIW, I use a bit of heat (although a bright sunny day is usually sufficient) and a plastic putty knife, along with the adhesive remover.
FYI. Good off and most solvents will not affect base coat/clear coat. Clear coat is an epoxy type off paint. Instead of using a solvent to change the physical properties of the paint, it uses a harder to chemically change the coat.
In their defense, the Cadillac emblem is silver, not black. If they sent it with the front emblem black, it wouldn't be their logo which is copyright protected.
Chevrolet will sell you a flow tie and black tie and Ram has had Black emblems and logos for years though
@@chrysler748 that's true. After writing this comment I saw that the new lyriq is going to be coming with the silver caddy emblem so maybe they're just late to the party.
Side reflectors are there so people can see that behemoth on the road. But if you don’t want to be visible at night, I guess.
We don’t have side reflectors in Europe, on the other hand we have had LED headlights for years so we can see where we are going.
Side reflectors are there because of stupid government regulations. Like Tom said, they aren't required in Europe and they have been doing just fine. If people cant see a car at night while their headlights are on, they shouldn't be driving.
@@johnjacob688 they are not stupid regulation. They are there so you can see the car at night if it is parked from really far away.
@@J38x729 "If people cant see a car at night while their headlights are on, they shouldn't be driving."
@Tom-sg4iv u don't have these massive cars in Europe 😂
Bro, your rig looks 1000% better just with those small improvements. My vote is to go full storm trooper with the wheels.
Thanks for the video bro. Looks good and it’s gonna help me a lot with doing the same thing to my Escalade !
Looks awesome brother. Love the idea of taking “Escalade” off the car. Did the same to my CTS.
Perfect!!! Only thing I would of done differently is kept Escalade on the bottom left
Great video I do the same thing I removed any badges of the dealership because when I look at it I’m driving around with their name giving them free advertisement now if they want to pay me I’ll keep them on there
Bingo….. I tell the salesman b4 I sign anything make sure they (bodyshop) take all y’all’s logos/name off the car
I am deff doing this to my cadillac, looks great
LOVE this I thnk I will try this method of peelable paint once I have my car detailed. Thansk for showing how much more awesome it looks without the badging!
Your garage is goals bro!
I did the same thing to my 2021 Tahoe High Country in cherry red. My wheels are powder coated gloss black, it looks fantastic!
Looks awesome, love the blacked out look on the white.👍🏾
Fantastic easy to follow content. Very informing. Thanks from Seoul, Korea.
Good video!!!! As soon as my new car gets it, I'm goin do to the badges and tint the side markers. I wish they did offer the blacked out badges with the black out, grill options.
When I saw the first Escalade in the early 00's I thought to myself "This is the vulgar expression of a gangster" now It looks like a big fridge with wheels
Pretty sure chilled cup holders are an option these days. So yes
I have a 2022 XT6 Sport White w the Onyx package. Did the emblems, etc as well. Full stormtrooper. Looks bad ass. So does your beast.
8:50 Pro-tip, use multiple layers of blue painters tape as close as you can around the emblems. Many of these emblems have VERY sharp corners and can gouge your paint. Secondly, you can use a blowdryer or heat gun (careful not to mess up paint) and they come off much easier.
Just to let know that you can order monochrome Cadillac emblems fro front and back, they are also part of onyx package.
Chrome is the problem with monochrome. No shiny pls
The black emblem with the yellow and red parts different shades of grey and black looks pretty cool seen it done before somewhere
Very nice look for sure!!! Your boy, totally awesome cute!
Be careful with letting the goo gone and goof off sit for too long, I’ve had the Goo Gone actually take paint off my car on accident. Luckily it was my shitbox EK Civic but I didn’t realize that there was Goo Gone that dropped down the trunk and bumper and it actually bubbled my paint a little bit then a week later paint started chipping off, so I had to take the bumper off and paint it with black and then clear coated it
You have a beautiful collection of vehicles!! 🥰
You are 100% correct on the complete black out on the emblem, as much as love my all black caddy. Sometimes it just blend in with the car.
So I just bought the black covers for the front and rear emblems, they have like an American flag design which I like. I didn't even think about the reflectors, definitely going to try that this weekend. As for the side emblems I just took those off, once you painted them, you couldn't really see them anymore. Looks great though. Mine is black unfortunately, dealership kept marking up the white ones.
i did a black grill on my f250 and it hits real hard👌
Way easier to use a heat gun, you can buy one at Lowe's for 20 bucks, decals will pop off taking the glue off with them, I debaged my brother's 2022 Escalade and my 2021 750i and it took me 10 minutes to do both cars.
He has a heat gun. He was using it to apply the vinyl to the reflectors. I have no idea why he didn't use it to remove the lettering.,
I think I would want to use Steel it to black out emblems. I have used the tint to black out lights. It was easier for me to black out emblems where you have to stretch the tint. The clips will be priceless when Baby Awesome is a teenager! Great video!
Great work man. The clips at the end 🤣 perfection
Nice and clean 👍🏻👍🏻👍🏻
Like your collection of vehicles.
I like Dad … he loooked out, that side few marker? What was Cadillac thinking? Beautiful car best looking one I’ve seen.
that turned out really great
Super Clean Bro!!
reflective vinyl on reflectors is so cool, try it. black vinyl reflects white
Didn’t know that was a thing. Thanks!
Good deal, I’m blacking out my suv decals as well
A good adhesive remover aka the best is in a red/silver can and believe it’s the 3m brand it’s like $40 a can but works 10x faster than goo gone
Is it safer I’m not sure. But I used that stuff to remove graphics at my old job.
You also can use a heat gun or hair blower on low heat to remove the lettering
Awesome, really cool…After your perfect design, it becomes like Transformers, so handsome.😎
You have 2 of my dream vehicles !!
Looks awesome good job
Your garage is Gorgeous.
I remember when I bought my 15 Hyundai Genesis back in 17. I politely asked the dealer to take anything and everything that had their name on the car. I stated "you don't pay me to advertise. Strip it" 🤣
Facts
I’m a painter so my only difference would be to paint those reflectors up front and gotta go al black on the wheels the TX plate looks great lol
I like this guy great job 👏 👍🏾. And remember!!! NO MOMMY 😅😅
Definitely should nickname that beast Stormtrooper
You've got skills.
Impressive
Great video! I de-badge all of my cars including the wife’s. We recently bought her a new white 350 f-sport Lexus from Sewell, I debaged it AT the stealership (with dental floss) and gave it to the salesman… lol. Wrapped the window trim in gloss black.
Ha! I would have liked to see the salesman’s reaction
@@ZeroToAwesome He was just standing there looking like “I know this guy is not removing the badges HERE, in front of me”. He KNEW it was actually happening when I dropped ‘em in the palm of his hands, told him “thanks again”, and drove off!
Any recommendations or websites on how to change the interior wood trim? I have a sport platinum and i hate that gloss woodgrain. I prefer the black woodgrain on the regular sport. I wish they had like a carbon fiber option or a open pore wood. That shinny wood sucks
Woulda glanced at that on the street and thought it was a suburban after the changes. Kinda Defeats the purpose of paying extra for an escalade ... lol
Nice work!!
I got to do debadge my Jaguar XFR. Already have blacked out trimming. 🤔. So that peel off glosifier combo was it huh?
Worked for me!
Crazy how little things make a huge difference
Looks awesome! Leave the wheels. I like them!
It’s always the small details that make the difference
They should make the black plate with white lettering available in all states to match the functuay!
Looking good 👍😎
9:43 I used a blow dryer and the letters on my Tahoe all came off almost clean, used 91% alcohol for the last little bit
I think it would look neat to leave the colors on the badges and only black out the chrome part
They did that for c7 corvette logos. Maybe they will for this too
Dear,
Tnank very much for shering
Great video. Could you elaborate on the side marker removal? I unclipped the electrical but unsure how to separate the white clips from the actual orange side marker. Thanks!
There’s a little tab on the white clip facing the front of the car that you can’t really see. Press it down and then the white tab slides out towards the wheel well
@@ZeroToAwesome thank you….was being a little over cautious on the 2 day old lol.
I moved to Colorado and I just can’t believe how all dealers badge cars here. You pay $40,000 and up for a vehicle and some dealer puts their stupid dealer badging on the back of EVERY SINGLE VEHICLE…. and usually crooked.
And nobody removes them. I think it looks super dumb when you pay 40-60+ grand on your top trim car to have a big chrome (insert dealer name) sticker on the rear of your car. First thing I do when I roll off that dealership lot is remove that thing even before I get home
Gotta love those complimentary car washes and valet
That was a since crime against humanity. I am devastated as a cadillac ownwr that you would do such a thing. But you make it work looks good
Looks very nice 👍🏽👍🏽
Just take the rear reflectors and the side markers off and spray paint them white to match 🤣😂 that’s what I did with my civic. It was a 9th Gen civic si coupe so it had 2 giant reflectors like 6 inches under the tail lights, since I was going with a black and green color scheme like monster, I took those reflectors off and spray painted them like green, also I tinted the tail lights with the Vivvid Vinyl Hexagon holographic and the shit looked amazing. I was gonna tint my head lights but I decided against it and eventually took my headlights off and opened them to delete the orange plastic inside the headlight. Shit looked absolutely amazing. I love vinyl wrapping and doing cool custom things like that. If there was more of a business need for it, I would go after doing the custom little stuff, but there’s no way a business can survive on the custom SMALL things, so I always look for the little things to do all the time, I even go do it for my friends and they pay me to get the little things off, take them home and paint them or vinyl wrap them, then I go back when the parts are ready and install them back into the car.
We all know doing the little pieces is annoying and a lot of people hate it, but I enjoy it. So if anyone wants, y’all can send me the little things or if you live in Florida, you can pay me and I’ll come do the little things for you lol. That goes for anyone 😂🤣
Looks a lot better cheers mate 👊
I take the dealer emblems/stickers off as soon as I get home.
He wasn’t kidding about “no mommy” 😂😂
they have an option to make it chrome/black, atleast now they do, im looking to get one in the next month or two
Would it look better with a few of the color squares showing in emblem? Just a thought. Nice rides💪
They have one like that for the corvette but I still don’t like it. I’m sure some people do though!
That looks really nice.
they do have a black emblem you can install on the grill have done multiple of them (gm part )
They have a grey/black emblem seen it on a couple trucks
True. Not all black though
I use a hair dryer on emblems and text on the car. I used it on my Porsche Turbo emblem and it worked great. It softens the glue so you can just peel it off. Hit it with Goo Gone and your done.
Why would they not do that from the factory? Looks great!
Your mom and I go way back, like Cadillac seats 😁
And your mom and I turn on the seat heater to make sure it’s hot
you earned a like for the last minute of the clip: )
beautiful kid. God bless.
kidding thanks for sharing 👍 great info.
Cadillac offers a package called Oynx Package, which does more black trims and also removes the color off the emblem
I promise you the easiest way to get that adhesive off that is used on the letters, is to use rubbing alcohol.
Why not just black out the badge also? Also what trim did you get, thinking of getting one?
What badge? We went with the sport trim. Had to get something other than the base to add super cruise
@@ZeroToAwesome the Escalade, true I need more HP that's why I want to get the sport, looks good man white is the way to go black sucks for upkeep.
I do take issue with covering the marker lights with tint. Those are safety items and could get you pulled over by the po po.
i think "No Mommy" part will go viral 😂
Looks nice, but I would have seen if I could get a small piece of white vinyl for the amber Reflectors (you didnt mention if you did look or not), if not then did the black, at least in this case.