Hey, man. I just wants to say thanks a lot for showing me how to fix my spinner. I ended up dropping it a few times when I first got it, and it started messing up, and slowing down on one side like yours did in the video. I was wanting to know how I could fix this, so I looked up how to fix it, and watched this video, followed your instructions, and it turned it to work really well, better than it did even before I dropped it. Thanks so much, dude!👍🏻👍🏻
I didn’t even have to put tape on mine. I just took it out, got too lazy to find tape, put it back in and it worked! Thanks! I didn’t even know that part came out! 😊
I've just drilled the retaining shoulder out of mine so it's just a straight 'tube', centralised and Loctited the bearing in ...works a treat :-) It was fun going back to my old aluminium cheapy spinner having removed/replaced the bearing a few times on my Rotablade Tri Stubby ;-)
Oh my gosh thank you I just got my fidget spinner today and to stop spinning so then I looked and it didn't work so then I saw your video and it worked!!!! Ty sooo much
Thank you so much I bought a chroma fidget spinner in SWEDEN for 179 NOK! And it got "broken" the first day But now I know how to get the middle out and fix it
Thank you!!!! I subbed and liked I was so disappointed when only one side worked mine came with a washer but that was loose too!! But this really helped now both sides work perfect thanks again
u can also pull the bearing..push it and that method also u can spin...in that but on table it will spun soo much time 2:37 secs but my spinner time 5 mins..
Mine is an chrome colored spinner, aluminum made but has trouble spinning on one side (quite like yours) but it comes with a washer for that side. I'm thinking I should just get another washer but also not sure if it will help at all
hey dude nice tutorial it worked for me but i also had my own way around it too :D i took out the bearings then i put masking tape around the bearing then i trimmed the edges after that i peeled the masking tape off and because of the glue on the tape it stuck in the spinner and it does not wobble anymore :D but thanks for the help i did use some of your techniques as well
So, I recently got a metalic spinner like that one (I only say "metalic" bc I don't know if it's made of brass, aluminum, steel, etc), and it stopped spining properly. It`s just like this golden spinner you showed in there (it has the same type of bearing held in place by a "collar" just like that one), only it has the round design of a more common hand spinner. I believe it has stopped spinning because that collar became loose and it`s going "up", moving out of place mid-spin. Does this fix works for this case or do I need do fix it another way?
I know kinda old at this point but I have a metal spinner now I really like, it spins for a long time but then just kinda grinds and stops, is there an easy fix for that as well? x.x The spinner came oiled pretty good for once so I don't think it'd need any WD-40
Hi! Thanks for this! I'll do that. can you show how to put back the 9 balls bearings system (Atesson )? please. Thank you! (every one shows the 7 which is great as well but the technique for it is different) 😃
That little thin part of when dissembling got stuck in the other part and it broke like that so I was watching to see if this will fix my fidget spinner (it’s also a mini)
All I had to do was pull it apart and put it back together again, I had the same issue with the bearing moving, but after putting it back together, the shifting bearing stopped and it was fine. I think my caps are now tighter too
Not having access to his spinner I can't really tell for sure but.....if you look at the two caps over the bearing, they have different collars around the screw/nut centers, and the bearing housing has different sides. One is wider/open rather than the other narrower/closed side. I think he's just got the caps in backwards. I think if he puts the screw side of the cap into the bottom, closed side of the spinner & the nut side of the cap on top of the side of the spinner where the bearing drops in, he'll solve his problem without the tape.
Mad Rocks try Acetone it will dissolve super glue and it will clean it i got super glue on the ball bearing and it didnt spin well so i put it in the acetone and it helped to remove it
I have a question about fidget spinner it's the gold one u have. my front side spins faster but the back part it's spins but slow and it makes weird noise sorry about my grammar i hope u understand me what I'm trying to say I just need help:(
I have a fidget spinner that I don't believe you could take apart that is having the exact same issue. It is supposed to spin for 3-5 minutes but it spins and just stops. What should I do?
Plzz help me !!My fidget spinner cap and bearing set is very different. There is cross (X) on my fidget spinner cap instead of that circle (❍) because of that i cant stick my cap to the bearing set even its not broken i also tried hot glue gum but its not working.And the bearing set is very small that i can't play with my spinner is without its bearing cap. Then plzz help me.🙏🙏
i did fix it in a other metod... i took out the bearring and put it in a cup with diesel and the i took it upp and to a hairdryer ( you can also use a air compressor) and blow on the bearing, boom fixed and it makes less sound
i ordered a metal fidget spinner but it came with the standard black and silver bearings on the outside, i'm trying to remove them but they seem to be stuck, any help please???
I literally have the same problen which means that it spends amazing on one side only but this method didnt work can you help me please ? I really got it like two days ago and its expensive plz
hey guys, i have been having a problem with my rainbow fidget spinner. when i firsr got it it spun for 7 min. the next day it spun for 3 min and the day after almost 1.5 min with alot of sound. is this normal that a fidget spinner gets less spin time every time or is there a problem? pls tell me i had this problem for quiet a whilr
my spinner used to spin for about two minutes, but now it only spins for maybe 30 seconds. ive tried using rubbing alchohol and a hairdryer, but it doesnt fix it. help?
Hey, man. I just wants to say thanks a lot for showing me how to fix my spinner. I ended up dropping it a few times when I first got it, and it started messing up, and slowing down on one side like yours did in the video. I was wanting to know how I could fix this, so I looked up how to fix it, and watched this video, followed your instructions, and it turned it to work really well, better than it did even before I dropped it. Thanks so much, dude!👍🏻👍🏻
Same😂
Thzg😂
It worked! Thank you so much for the great tip on how to fix my fidget spinner!
Glad it helped!
You don't understand how much I appreciate this vid😂
Thanks so much it made my brass spinner so better now I can spin it on both sides
TROUBLETRAIN 14 ssd
Ya it helped mine the same but I use painters tape and that helped way better it stay for much longer
TROUBLETRAIN 14 sameness
TROUBLETRAIN 14 I
ppl getting tired of these spinners when I'm still waiting for mine to arrive -_-
Ernesto G same ):
same bro haha
Lol me too
Ernesto G im waiting for 10 spinners and have 2 already. I dont Think they get boring
markus g.christensen The small ones get boring, the metallic ones
This is the first video I ever watched on your channel, I will say that I quite enjoy the pen reviews these days
Very good mod. I have tried it on the male portion of the button to reduce the wobble and increased the spin time by 30 seconds.
Anand Nande wow so it really works I need to try this
I didn’t even have to put tape on mine. I just took it out, got too lazy to find tape, put it back in and it worked! Thanks! I didn’t even know that part came out! 😊
Coming here 4 years later after finding my fidget spinner that doesn’t work 😂
I've just drilled the retaining shoulder out of mine so it's just a straight 'tube', centralised and Loctited the bearing in ...works a treat :-) It was fun going back to my old aluminium cheapy spinner having removed/replaced the bearing a few times on my Rotablade Tri Stubby ;-)
Thanks so much bro, I've been complaining how it did that the whole time, but god bless your video popped up first, thanks again!
I can't believe I had to look up on TH-cam how to fix a fidget spinner lol. But it did fix it, so thanks!
Thank you! I have this problem too because I removed the rubber part and the other side stopped spinning.
Oh my gosh thank you I just got my fidget spinner today and to stop spinning so then I looked and it didn't work so then I saw your video and it worked!!!! Ty sooo much
Are they supposed to be slow when you first get them and over time loosen to?
Thank you so much
I bought a chroma fidget spinner in SWEDEN for 179 NOK!
And it got "broken" the first day
But now I know how to get the middle out and fix it
President_Pickle 179 is a lot or not?
WOW I JUST BIT THE MIDDLE PART OF MY FIDGET SPINNER AND TWISTED IT A LITTLE BIT AND IT WORKED!!!
A few weeks back i got this spinner and it was smooth and ran for 4:18 mins and now runs for 30 sec and sound grainy and feels rumbled
Yesss!!! Thanks man!! My fidget got a little messed up and this video helped so much!!! Thumbs up for me!!👍🏽👍🏽
It's actually a lot faster now than it was when I bought it. Huh. Weird.
Thank you!!!! I subbed and liked I was so disappointed when only one side worked mine came with a washer but that was loose too!! But this really helped now both sides work perfect thanks again
u can also pull the bearing..push it and that method also u can spin...in that but on table it will spun soo much time 2:37 secs but my spinner time 5 mins..
Mine is an chrome colored spinner, aluminum made but has trouble spinning on one side (quite like yours) but it comes with a washer for that side. I'm thinking I should just get another washer but also not sure if it will help at all
I had my spinner yesterday and it has ready started to play up ...... this helped a lot even though I didn't put tape on the bearing
my fidget spinner won't spin can you help me fix it im at south florida
I love your fidget spinner I need to do this because my fidget spinner is really slow ty
The middle baring doesn't come off on the rainbow ones
guys he deserves subscribers
hey dude nice tutorial it worked for me but i also had my own way around it too :D
i took out the bearings then i put masking tape around the bearing then i trimmed the edges after that i peeled the masking tape off and because of the glue on the tape it stuck in the spinner and it does not wobble anymore :D but thanks for the help i did use some of your techniques as well
My fidget spinner stopped working before but you helped thx bro and my fidget spinner is better and faster
Thanks my fidget spinner the middle baring was going up and down and i was so sad but i got help from you thanks so much
So, I recently got a metalic spinner like that one (I only say "metalic" bc I don't know if it's made of brass, aluminum, steel, etc), and it stopped spining properly. It`s just like this golden spinner you showed in there (it has the same type of bearing held in place by a "collar" just like that one), only it has the round design of a more common hand spinner. I believe it has stopped spinning because that collar became loose and it`s going "up", moving out of place mid-spin. Does this fix works for this case or do I need do fix it another way?
Love your videos, man! Especially how often you upload. Keep it up :)
Dojoguy365 - Trevor why don't you just buy a new one? It's only a dollar
What?
Dojoguy365 - Trevor Wrong comment I guess.
what are those bearings called? nice video
I have the exact gold spinner he showed, and somehow the bearing doesn't move properly could you make a video how to clean your bearing?
thank u soooooooo much, I love u bro, I thought I broke my fidget the day I bought it
Nbeatz Vlogs Lol same here man. I dropped it and I think that's was started it.
I know kinda old at this point but I have a metal spinner now I really like, it spins for a long time but then just kinda grinds and stops, is there an easy fix for that as well? x.x The spinner came oiled pretty good for once so I don't think it'd need any WD-40
Hi! Thanks for this! I'll do that.
can you show how to put back the 9 balls bearings system (Atesson )? please. Thank you!
(every one shows the 7 which is great as well but the technique for it is different) 😃
I also have a pink one to but it’s better then my purple figedt spinner because it’s faster
What is the barring covers refuse to come off?
Legends watching after 5 years😁
That little thin part of when dissembling got stuck in the other part and it broke like that so I was watching to see if this will fix my fidget spinner (it’s also a mini)
All I had to do was pull it apart and put it back together again, I had the same issue with the bearing moving, but after putting it back together, the shifting bearing stopped and it was fine. I think my caps are now tighter too
thank u my fidget spinner works now!!!!!!!!!!
Diego Ocampo ex nub
Not having access to his spinner I can't really tell for sure but.....if you look at the two caps over the bearing, they have different collars around the screw/nut centers, and the bearing housing has different sides. One is wider/open rather than the other narrower/closed side. I think he's just got the caps in backwards. I think if he puts the screw side of the cap into the bottom, closed side of the spinner & the nut side of the cap on top of the side of the spinner where the bearing drops in, he'll solve his problem without the tape.
can we get a permanent fix video please? I just bought a jarumax but it rubs against the body and doesnt spin right.
Thank you my rainbow fidget spinner works a lot better now! 😊
plzzzzz help me by mistake I drop super glue on the small bearing plz help me its not spinning
Mad Rocks gg bro
Mad Rocks duuude I DID EXACTLY THE SAME FUCKING THING
Mad Rocks try Acetone it will dissolve super glue and it will clean it i got super glue on the ball bearing and it didnt spin well so i put it in the acetone and it helped to remove it
Mad Rocks i also did that not spinning huh
I must ask.... why
thank you Sally for your help now I can use my Figet spinner I love your vids! keep it up
the tape actually worked! Thanks
What I did to fix mine was take the whole thing apart and rub each piece with water and soap. Loosened the bearings right up!
Can you show how to take apart a small fidget spinner bearing? Not the regular size the tiny size
this will help my figet spiner work thanks so much
My one is purple
Do another one because there's like other types unless you do the same thing but great video
it works for my fidget spinner nicely! thanks sal!
mine came with a screw on spacer to hold the bearing in and stop the thumb grips from scratching up the spinner and spinning right.
Do you know why my spinner stops when I put it on my finger
Is it like that for all of the aluminum spinners you order?
Faded Shadow mine is ok. I try first before I bought it. Spins smoothly both ways.
Also if you carry it in your pocket alot, check inside for pocket lint interfering with the bearing. That was my issue.
It'll affect the spin speed. I did the same and now spin speed decreased from 2:09 to 55 seconds..
if it messes up can you make another video to solve the issue
one problem... my two middle peaces are hooked together and they are lose and they won’t screw back on
You don't need to use the Scotch tape. Most spinners come with a part that holds the bearing in
I have a question about fidget spinner it's the gold one u have. my front side spins faster but the back part it's spins but slow and it makes weird noise sorry about my grammar i hope u understand me what I'm trying to say I just need help:(
I have a fidget spinner that I don't believe you could take apart that is having the exact same issue. It is supposed to spin for 3-5 minutes but it spins and just stops. What should I do?
I have one of those plastic spinners, same problem. Now how can I fix that?
Can i use it in my plastic spinner or the original one
what can u use instead of scotch tape????
Plzz help me !!My fidget spinner cap and bearing set is very different. There is cross (X) on my fidget spinner cap instead of that circle (❍) because of that i cant stick my cap to the bearing set even its not broken i also tried hot glue gum but its not working.And the bearing set is very small that i can't play with my spinner is without its bearing cap. Then plzz help me.🙏🙏
Thanks soooo much this helped me sooo much at school i feel awkward at school when my friends want to use it they look at me weird
Tools I need to fix my fidgets: hacksaw, sledgehammer, blow-torch, 44 magnum and a brick. I need the brick for the more delicate work.
How do you take the collar off
i did fix it in a other metod... i took out the bearring and put it in a cup with diesel and the i took it upp and to a hairdryer ( you can also use a air compressor) and blow on the bearing, boom fixed and it makes less sound
i ordered a metal fidget spinner but it came with the standard black and silver bearings on the outside, i'm trying to remove them but they seem to be stuck, any help please???
Nice fidget spiner
Doublekop they are actually cheap I just bought one for 7 dollars
I well get a figet spinner on monday
killshotko 131 HEY MY ONE IS 30$ YOU THINK THATS CHEAP? NO IT ISNT :P
AquaShinyShard - Roblox Gaming rich people Maybe think it's cheap
AquaShinyShard - Roblox Gaming ur right
thats too damn EXPENSIVE FOR A FIDGET SPINNER
THANKS SO MUCH THAT HAPPENED TO MY SPINNER AND NOW IT WORKED!!
Thank you... Haven't had my spinner for a day and it failed on me
Can you help me I have a metal fidget spinner and the middle cap wont come off
VisibleGold 80 twist it
VisibleGold 80 Same here
i used tweezers to pull out the caps of my "original/normal" fidget spinner
Thank you guys!!!
VisibleGold 80 Did it work?
Thanks it worked now it spins perfectly
mine was like that too I just took the bearing out and flipped it then put it back in and it works perfectly now
R u going to make a follow up for this video?
Yes please
Well the middle bearing dropped and I can't find it and the things connected to the middle bearing broke what do I do
please help
Grilled Chocolates wow really no duh
Grilled Chocolates thanks for the advice I already did
What's the way of opening iron man spinner(metal)
What do I do if my caps are stuck they don't spin off like normal
I literally have the same problen which means that it spends amazing on one side only but this method didnt work can you help me please ? I really got it like two days ago and its expensive plz
The thing under the cap that protects the bearing wont come off
what type of bearing is that
this Video saved my fidget spinner !!!!!!
Thank you so much, this video is very helpful. I fix my spinner.
omg thnxx so much I was gunna buy a new one and then saw this vid thank u
You Know The Other gold spinner Could you put it back together
FreshGalaxy Gt i have the metal one and it doesnt even spin
Oh
K
hey guys, i have been having a problem with my rainbow fidget spinner. when i firsr got it it spun for 7 min. the next day it spun for 3 min and the day after almost 1.5 min with alot of sound. is this normal that a fidget spinner gets less spin time every time or is there a problem? pls tell me i had this problem for quiet a whilr
Do u remove the tape???
If someone has no fidget spinner I'm gonna be like
Me : .....um....ok.....????
Who's playing a fidget spinner while watching this
Meee
Thank you soooo much now my fidget spinner can spin!
Is that double sided tape?
my spinner used to spin for about two minutes, but now it only spins for maybe 30 seconds. ive tried using rubbing alchohol and a hairdryer, but it doesnt fix it. help?
Very useful thanks and please do a locktite video
How dobu do it if u have a light up spinner. Its not the same
mine has the screw locktight thing but still hits the body of the spinner need help