So I got a question I got a 55 gallon that I’m turning into a saltwater tank and a 12 gallon that I’m turning into a sump my overflow box rates at a 150 gallons and my return pump is 750 gallons per hour. Do you think that’ll work out or should I go less or higher on the pump?
I noticed the 9” inch middle buffle” is pretty short. Would it be convenient to make those buffle panels taller so that the sump could hold more water? Assuming, the tank is filled up to top and has a tall or hanging protein skimmer.
Amazingly I built my sump the same way you did but with one less baffle....wish I had seen yours before I built. Your build went much more smoother and much more cleaner. I built my baffles at 11 inches...don’t know why....just did. Hope that isn’t too high...guess I’ll find out when I test the system. Looking for soft tubing at Lowe’s to fit my pumps and fittings. They have a limited selection, gonna check Home Depot next. Just found some egg crate pieces for the media section. Hope to have it up and cycling by X-mas. Great channel my friend....keep the video’s coming and give us updates. Reef on 😎
Thanks a lot man!! Your design sounds good! Put a check valve on you system so you don't have to worry about sump overflow when the power goes out. And you can also find a lot of different soft tubing sizes from most local fish stores also.
Were the baffles you made all 9 inches tall? And what length did you choose? And what thickness did you get? Going to Menards tomorrow... I also have a 40 gallon breeder for my new 125.
All the baffles are 9 inches tall, yes, I chose to use 1/4" acrylic and its working great. I got a big sheet from menards, it was like $50. They are cut as wide as the sump and siliconed in place. I used hot glue to hold it in place as I siliconed.
Ok so I just got a 90 gallon aquarium and this will be my first salt water aquarium. Should I get a protein sump system or can I just use a canister????
I would highly recommend a sump system with a protein skimmer yes, way more effective and easier to maintain. Im personally not a fan of canister filters.
Hey, i have a 55 gallon and i would like to use it as a sump but i am worried it will too tall and narrow. I dont really want to spend money on a 40b when i have this tank but if i have to i will. Any opinions?
Lots of people use 55 gallons as sump without a problem. If you can access it easy from the top I cant see a problem with using it as a sump, the bigger the sump the more possibilities.
Thumbs up, sub'd! Nice work there and you used acrylic baffles. It makes you wonder about what some people say. Can't knock it till you try it 'sometimes'.
I always see people say not to use acrylic baffles on a glass sump because the silicone supposedly won't hold them together. How have they been holding up for you? Any leaks or other points of concern?
I think this is the best diy sump ive seen.
Seen a bunch that dont have a sock filter spot nor a chemical cleaner spot
Thanks for the support!
So I got a question I got a 55 gallon that I’m turning into a saltwater tank and a 12 gallon that I’m turning into a sump my overflow box rates at a 150 gallons and my return pump is 750 gallons per hour. Do you think that’ll work out or should I go less or higher on the pump?
I just got a 125g I’m planning on doing salt water with. Your videos are gonna help me so much
😍 the hot glue trick to hold it up sweet smart😁
Thanks, it worked great!!
Damn straight stroke of genius
best use of a toby keith CD ive ever seen
LOL!!!
great video . do you have a video of tuning that ev-180?
Wow. I’m very impressed with your talent
Thanks!!
I noticed the 9” inch middle buffle” is pretty short. Would it be convenient to make those buffle panels taller so that the sump could hold more water? Assuming, the tank is filled up to top and has a tall or hanging protein skimmer.
You can yes and I should have so it heald more water.
Amazingly I built my sump the same way you did but with one less baffle....wish I had seen yours before I built. Your build went much more smoother and much more cleaner. I built my baffles at 11 inches...don’t know why....just did. Hope that isn’t too high...guess I’ll find out when I test the system. Looking for soft tubing at Lowe’s to fit my pumps and fittings. They have a limited selection, gonna check Home Depot next. Just found some egg crate pieces for the media section. Hope to have it up and cycling by X-mas. Great channel my friend....keep the video’s coming and give us updates. Reef on 😎
Thanks a lot man!! Your design sounds good! Put a check valve on you system so you don't have to worry about sump overflow when the power goes out. And you can also find a lot of different soft tubing sizes from most local fish stores also.
@@EagleAquatics Sorry. Is the check valve supposed to be between the return hose ?
i like the use of the hot glue gun to hold the panels in place..
Genius right?
Are the heights of the baffles critical and can you give some of the dimensions?
Heights arent critical, dont have dimensions.
Amazing very impressive
very nice
Thanks!
Were the baffles you made all 9 inches tall? And what length did you choose? And what thickness did you get? Going to Menards tomorrow... I also have a 40 gallon breeder for my new 125.
All the baffles are 9 inches tall, yes, I chose to use 1/4" acrylic and its working great. I got a big sheet from menards, it was like $50. They are cut as wide as the sump and siliconed in place. I used hot glue to hold it in place as I siliconed.
Ok so I just got a 90 gallon aquarium and this will be my first salt water aquarium. Should I get a protein sump system or can I just use a canister????
I would highly recommend a sump system with a protein skimmer yes, way more effective and easier to maintain. Im personally not a fan of canister filters.
@@EagleAquatics we went with a sump :-)
whats the smallest size sump ever used on a nano
.1 gallons
Is this a terrarium 40 gal tank or one for aquariums? How did you find it for only $7? Everything I'm looking at that are aquarium-rated are $100+.
This is a 40 gallon fish tank aquarium. From petsmart they should be around $75 or so from what i've seen. I think I paid $70 for it.
@@EagleAquatics Ah. I mistakenly heard "$7" in your video. LOL
Hey, i have a 55 gallon and i would like to use it as a sump but i am worried it will too tall and narrow. I dont really want to spend money on a 40b when i have this tank but if i have to i will. Any opinions?
Lots of people use 55 gallons as sump without a problem. If you can access it easy from the top I cant see a problem with using it as a sump, the bigger the sump the more possibilities.
Thank you!!
Thumbs up, sub'd! Nice work there and you used acrylic baffles. It makes you wonder about what some people say. Can't knock it till you try it 'sometimes'.
I love the acrylic it is still doing great almost 2 years later.
Nice job. Will this tank be for coral only??
Thanks, this is going to be a reef tank with both coral and fish.
I always see people say not to use acrylic baffles on a glass sump because the silicone supposedly won't hold them together.
How have they been holding up for you? Any leaks or other points of concern?
Absolutely none. The silicone has done an excellent job of holding them up and together, even after 2 years.
Ice video. Thank you Jim Fisher.
Eheim is the best for sure
No doubt
when cutting the glass for the sump, do you cut it 1/4" short for the width or 1/4" short for each side?
Nah We cut it almost exact so it just fits in between both side of the tank and then silicone the gaps.
@@EagleAquatics did the acrylic sheet expand. I keep reading in the forums that acrylic expands in water. Is it true?
I was expecting to see the test run or it all the way complete at least.
Check some of my latest videos!
Hardest part was finding all those CDs.
LOL
That’s an external skimmer
Does this work for a freshwater tank also?
Yah for sure!
Can't watch a video with a Toby Keith CD in it.
How dare you say such a thing.
Rrrrr
Quit the fucking annoying music!