TOYOTA CAMRY 2015-2017 Fuel injector cleaning | Cheapest way of cleaning Fuel injector | ALIMECH
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- #ALIMECH #injection #cleaning #toyota #camry
Injector Rebuilding kit: amzn.to/3Re8Meb
Injector Tester AND adapter: amzn.to/3JJXXfQ
fuel injector filter removing pliers: amzn.to/3UEcvTd
Ultrasonic Cleaner: amzn.to/3UVcuvt
Tool box: s.click.aliexp...
Fuel Line Disconnect Tools: amzn.to/4aJ8Nh1
In this video I will take the fuel injectors on my 2017 Toyota Camry and show you how to clean them with cheapest (best) way
This will be the same for the 2015-2017 models
Download fuel line disconnect here: www.thingivers...
Watch next:
Toyota camry brake caliper painting: • Rusty TOYOTA Camry Bra...
Fuel injector cleaning: • FUEL INJECTOR CHECK an...
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon M50: amzn.to/3beZ4BN
Dji Ronin sc Staiblizer: amzn.to/39bvyed
gopro hero 5: amzn.to/2H2ZbSQ
samsong gear 360: amzn.to/37YDj7b
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : www.facebook.c...
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh
Great job. I appreciate you taking the time to show how to do this. Thanks. 👍🏻.
Thanks Luke, and you are welcome
Camry 2014 se is that igual
Finally a tutorial on the newer years. I been searching since I got my car
You're definitely a good mechanic and are a big help for many people!
Thanks 👍
Nice work. A little tip to prevent hard start due to disconnect of the fuel line is to turn it to the ON position and let it sit for a few seconds before starting it. This will give time for the fuel to travel into the line.
@ 1:40 Ali is making seem so easy, I used a 5/16 fuel disconnecting tool and I am having one of the toughest time. I learned that you would have to depressurize the EFI or fuel pump so I removed the 20 amp yellow fuse under the hood ( EFI no. 2) the engine died out, let the engine cool down then I removed the battery terminals, and STILL, I could not remove the fuel line. Ali or can someone who is reading this give me some tips? What am I doing wrong here?
Thank you so much for the information, I will do it for my camry 2015, , good bless you.
From San Diego CA.
Thanks, god bless you too
Thank you for the advice specially on putting the oil for the o rings, I was struggling to get them back in on the first attempt because I did not lubricate them
You welcome, I'm glad my video helped you 🙏
ماشاء الله اخي مبروك شغل ممتاذ
Great video!!!
You make it look so easy!
👍
Thanks
you are professional man,
Thanks man 🙏🏻
Very goofd job ! Thank you for this important tutorial !
Thanks for watching
Any particular carb cleaner to clean up the injectors? You explained this wonderfully. If I didn't have a v6 I'd give it a try. Great video lesson. Thanks 😊 🙏!!
I really love how easy you make this look. As someone who is far from even an amateur mechanic, would you suggest I try this. I have watched it a few times and besides acquiring the tools (I still don’t get that 9v battery switch or how I would get/make that lol) and I’m tempted to try. I have done some basic maintenance on my car with zero starting knowledge (spark plugs, filters, changed the serpentine belt, all from TH-cam btw). But this definitely looks way more intense. Thanks for anyone’s response.
Also my car is a 2005 Toyota Corolla if that impacts anything
Good job. My only 2 suggestions are to replace all o rings and you don’t need to use a half can of carb cleaner when cleaning the injector.
Thanks, yes it's a great idea for sure
Thank you very much for the information, I will do it to the. Chevrolet Aveo thank you very much and many blessings for you and your family 🙏👌🍀💯🙏👌🍀💯
You are very welcome
Alimesh. Is it relatively easy to replace the fuel injections without taking off the fuel rail. I just want to replace all four of them. Thanks for your help. Lc
Yes that's correct, but I always like to clean inside the fuel rail as well
Thank you sir, great video and explanation
Glad you liked it
Thank you, Larry
Very good Ali 👍
Nice work
Thanks for watching 🙏
I've heard it's also good to replace the larger O-rings when the fuel injectors are being serviced.
Did the car have symptoms like cranking longer than usually? My camry seems to take longer to crank than it previously has.
thank you for your help
Anytime
Nice. Thank you.
Is it 2AR - FE Engine?
Can you make one complete video on 3D printing basics?
I do a lot on my second channel, but never did here
@@AliMECH scale addition?
Thank you!
🙏🙏
What was it you did when you put new filters in the fuel injectors, also what was the method for removal of the old filter?
Do you use the same method on lexus rx 350 2016?
Love the video! I have a 2016 Camry hybrid LE. There is a different component above the fuel rod that’s blocking the fuel rod. I couldn’t figure out how to remove the injectors.
It's ok, in next week I'm uploading a video, how to direct clean fuel injection without removing it, stay toned
I saw your other video on a Mitsubishi. I couldn’t find the fuel pump fuse. Didn’t want to mess with anything without exactly knowing what I am doing. Thanks for quick response!
Thanks, the fuse is very easy to find, on the fuse box, I will show all that 🙏🏻🙏🏻
I am looking forward to your video! :)
Thanks brother
No problem
Hi 2013 toyota camry hybrid fuel injector replacement similar?
Hi Ali love your videos, could you do more videos on toyota prius as this is a very popular car around the world. thanks
I will try!, i have to borrow one
Thanks for the video it’s really helpful. Where can I buy hose adapter and fuel alligator wire.
You welcome, I bought the alligator clips on Amazon and the push switch,
Nice video! What do you think about gas additive for cleaning injectors.
Is the soft wire brush that you use to clean the injectors with made of metal or as a tooth brush?
Is this better than just pouring fuel injection cleaner in the gas thank. Alot ppl say just put fuel injection cleaner brand chevrons tech fuel injection cleaner in the gas tank.
Yes it will clean it eminently, without waiting and driving the car to clean the fuel injectors
Hello Ali. Is that your name? My name is Jimmy and we commented to each other before. I want to do the same thing to my 2013 Scion TC and I understand I probably cannot just pull one or both fuses for the fuel injection because the injectors will not activate. We have the same engine setup. I watched your other video where you disconnected the fuel pump under the back seat, but would like to avoid that method. I want to do it like in this video here. When I take off the fuel rail with the injectors still on it, can I just keep the injectors on it and do exactly what you did by running the hose connected to the opening in the fuel feed line with carb cleaner? And I will power each injector individually with a small 12 volt battery while spraying the carb cleaner through the main metal fuel line. Is that possible or is disassembly much easier? I did your carb cleaner method through the feed line in my dad's 1998 Cadillac Eldorado since there was only 1 fuse for the fuel pump with the device you made...I copied it perfectly...And it worked like a charm! Amazing results just running his Caddy on the carb cleaner...I doubled the average MPGs because the injectors were so clogged they were stuck open constantly even when the car was shut off they were constantly dripping fuel into the oil. And the exhaust doesn't smell like shit from running too rich as it did before. It runs like it's brand new again! Night and day difference...18-20 average MPGs to 36 average MPGs!!! That's double the fuel mileage! Much Appreciation and Respect to you my friend!!!!! Please get back to me when you get a chance about my method or simply doing it just like in the video. I found the O-Rings on Amazon for under $10 for four of them... They are made by Mahle and they have 100 filters for $22 made by Menghe. That's a lot of extra filters but it's worth the price.
Thank You Once Again,
Your New Friend Jimmy :)
Thanks man, well demonstrated and clear explained video!
I didn't expect to design and 3d printing yourself that tool 😀👌🌹 that was a different level of professionalism!
What 3D printer do you use?
Are the new o-rings and filters available with any Toyota parts dealer?
Yes I bought the o rings in set, I use creality ender 3 pro, I have another channel only about 3d printing rc cars it's th-cam.com/video/JL-BwpyPok8/w-d-xo.html
i used the same process on my 2013 camry but mine didn’t come with those spacers, should i be worried?
Great job ! Very carefully explained. Is there a way that I can have this job done by you please ?
Unfortunately, my 2015 Camry is an SE Hybrid which it has a lot more stuff built on top of the fuel injector bar. Almost impossible to remove, even with that tool that I also 3D printed. The socket for the fuel injection bar came out easy but the rest was literally impossible to remove.
Ali, what size hose clamp do I need to get for the fuel hose adapter and what kind of glue did you use and what size metal washer? Also, where can I find the switch and positive and negative alligator wires? Thank you Ali
What an outstanding video ! I assume I can use this on my 2015 RAV4 ? Where did you get your new O rings and injector filters ? Local Toyota shop ? Also, what did you do to get the filters back in the injectors ? You used pliers, but it went by to fast... Any particular injector cleaner you prefer ?
Thanks, you can find the O ring and filter set in the video description box, and I did a video only about cleaning fuel injectors so you can have in depth information about it
th-cam.com/video/3J7cqBNDIYo/w-d-xo.html
I have 2011 camry the im using the same disconnect fuel line tool and size your using but its not working
My 2014 RAV4 struggles to turn on when the gas is in 1/4 of gas can it be the fuel injector or the fuel pump?? Or Starter??? No check engine light on.
What oil do u use to lube the o rings
How did u de-pressurized the fuel rail/system
Hi , is there removable filters in injectors of camry 2azfe 2006 ?
great tutorial bro keep up
Thanks bro 🙏
How did u make the rubber hose tool for the injectors cleaning
In this video i show how to make it th-cam.com/video/9KdihbGiTo4/w-d-xo.html
Where Can We Purchase The Filters And O Rings?
Bro what is the size of hose pipe piece?
Please advise me where from I can get new filters and orings
amzn.to/3cksUEK
Hi from where I can get the injector nozzle filter because i asked the dealer and auto zone they says we don't have separate filters
Amazon
Was the car running bad or anything noticeable before doing this?
No, running fine, i also made this video showed how long it th-cam.com/video/WH6UchXTJJc/w-d-xo.html
you will be able to see how normal it was running
Where do you buy the injector filters? I can't find them anywhere.
www.amazon.com/MENGHE-TANGZHOU-Universal-Injector-Injectors/dp/B08XVQSVTF/ref=mp_s_a_1_5?dchild=1&keywords=fuel+injector+filter+baskets&qid=1619487190&refresh=1&sprefix=fuel+injector+fil&sr=8-5
Thanks for the Video. What size rubber hose did you use?
Thanks, about 6mm inner diameter
AliMECH Really Appreciate the reply! I’m going to give it a go tomorrow. Love your videos, keep it up!!
Thanks, you welcome
Not sure but it sounded like he said use Carb cleaner, aka, Carburetor cleaner...
Is this correct ???
Yes they are the same
Hey is there any way to tighten my engine. For some reasons when I crank the engine while hood is open the engine jerks up and down. Not sure if that's normal
You must have broken engine mount
You must have broken engine mount
@@AliMECH damm u the man? Do you have a shop? Where are you from?
Is there a cheaper kit for filters & orings?
Yea, if you search on amazon
How do you do ac freez on
Didn't get what you mean 🤔
AliMECH how to put more freon on a camry. My bad I spell it wrong lol I sub and I love your vids and reply
@@bigboy6969100 Put on the hose on the valve and make sure the freon can is upside down then press it 45-50 psi max.
Exactly just like Dale mentioned 🙏🏻🙏🏻
How many miles the car has ?
30,000
Fucken badass thanks for a good video
Lol thanks ✌😅
Wouldn't changing the fuel filter first before cleaning injectors be more profitable
Where is the fuel filter on a 2017 Camry?
In the fuel tank, it comes out with the fuel pump, under rear seat
thanks in not enough
perfect tutorial. check us out for microfilters & orings
It would just be much easier and better to just replace the injectors
Instead of making the fuel filter under the vehicle. Let put it in a spot that takes a lot of work to get to and may brake 😂
Dude, it is cheaper and better to buy new once in order to avoid doing it wrong, or losing one of components.