Very slight displacement advantage to the 394/395. That said, run side by side with a 660 same bar and chain, every single cut would be within a second or two either way no matter the wood size. Shorter bars and smaller wood the 660 is faster, and lighter, and longer bars and bigger wood the displacement and torque advantage goes to the 394/395. Both are fantastic saws.
I think without checking that the 395 has more horsepower out of the gate, at least in OEM form than the 660. That said we also know that numbers don't necessarily mean anything. Both look to run well- I'm sure interested to see how they hold up!
Yes how do they hold up that's the big question because as you know a lot of us would Cutters are very poor hard-working Americans and around the world not too many of us are wealthy and we need a bargain that's why we buy the Clone it's it's to save money it's the only reason and if it's not a good saw that's going to last it's going to end up burning out and breaking then it's going to cost us more money in the long run perhaps? Does anybody know how long have these saws been around? These clones
I'm looking forward to the Husqvarna running against it's clone! I'd like to see how close they really are! From what I've seen so far the clones are looking really good!
From my experience and all that I own the actual holtzforma is by far the best clone saw nothing else comes close I’ve even seen them outrun the actual saws that they were cloning
That was a good one, I'm impressed with the Farmmac think I'm going to try out their F380w when I can, the 660 is just more than I'd ever need. Thanks for the video.
What size bar and chain does the 395xp take? Im looking for one but cant find any info on bar and chain size amazon dosent have one with a bar and chain so ill need to get em separately
Where can we buy these saws and where can we get parts for these so-called clones? I'm 66 years young and built log cabins and worked in the woods a lot and ripped Timbers and did chainsaw art these clones are new to me what's up?
Ebay, Amazon, etc. They take oem parts. If you buy a FARMMAC f660v and you need a new oiler, you get it from Stihl. Need a new chain adjuster, you get it from Stihl. Need a new a new recoil assembly, Same thing. Takes Stihl pistons and cylinders, so hyway or meteor fit no problem.
1 sec a tree faster makes 100 trees 1 minute and 40 seconds faster. In a life time you have been cutting down 100's or 1000's of more trees in theory. In reality i doubt it.
Great to get your input on saws with fair comparison. Well done sir.
Them clone saws are getting good man
660’s have always lost to 395’s.. 395’s are some of the best saws pound for pound on the market today.
Very slight displacement advantage to the 394/395.
That said, run side by side with a 660 same bar and chain, every single cut would be within a second or two either way no matter the wood size. Shorter bars and smaller wood the 660 is faster, and lighter, and longer bars and bigger wood the displacement and torque advantage goes to the 394/395.
Both are fantastic saws.
That's a close head to head. Nice comparison.
I think without checking that the 395 has more horsepower out of the gate, at least in OEM form than the 660. That said we also know that numbers don't necessarily mean anything. Both look to run well- I'm sure interested to see how they hold up!
Yes how do they hold up that's the big question because as you know a lot of us would Cutters are very poor hard-working Americans and around the world not too many of us are wealthy and we need a bargain that's why we buy the Clone it's it's to save money it's the only reason and if it's not a good saw that's going to last it's going to end up burning out and breaking then it's going to cost us more money in the long run perhaps? Does anybody know how long have these saws been around? These clones
I'm looking forward to the Husqvarna running against it's clone! I'd like to see how close they really are! From what I've seen so far the clones are looking really good!
Can’t wait to see what Ironhorse can make that 395 do. Supposedly the piston slap has been fixed on the 395. They had a bad batch of pistons.
Lmao ironhorse, stealing oem cylinders and putting on hyway.
From my experience and all that I own the actual holtzforma is by far the best clone saw nothing else comes close I’ve even seen them outrun the actual saws that they were cloning
That was a good one, I'm impressed with the Farmmac think I'm going to try out their F380w when I can, the 660 is just more than I'd ever need.
Thanks for the video.
Man great Sunday morning of noise and saws. Now I gotta go rip F660 for a bit thanks for the motivation brother!! Keep them up and running. 👍
Looks like a win with either choice
Iv got to get a clone soon . Never had or ran one . So that's next on the list
2 great running saws
Thanks for showing the comparison.
Insignificant difference😯👍🏻
Trying to decide between these for milling. By the way went with the gz5000. From lrb
Love your videos. Thanks
What size bar and chain does the 395xp take? Im looking for one but cant find any info on bar and chain size amazon dosent have one with a bar and chain so ill need to get em separately
Where can we buy these saws and where can we get parts for these so-called clones? I'm 66 years young and built log cabins and worked in the woods a lot and ripped Timbers and did chainsaw art these clones are new to me what's up?
Ebay, Amazon, etc. They take oem parts. If you buy a FARMMAC f660v and you need a new oiler, you get it from Stihl. Need a new chain adjuster, you get it from Stihl. Need a new a new recoil assembly, Same thing. Takes Stihl pistons and cylinders, so hyway or meteor fit no problem.
Very interesting!
very close the two chainsaws in times
Go Go Holzfforma!👍s🆙Big Guy!
Boedy!! lets get it bro 😊😊
Wonder how my G288 would do against it.
TOP NICE VIDEO.
What if you like chainsaws not brands witch then would you recommend?
660 clone or 395 oem
@@pantera-ms5jq ??
1 sec a tree faster makes 100 trees 1 minute and 40 seconds faster. In a life time you have been cutting down 100's or 1000's of more trees in theory. In reality i doubt it.
👍s🆙Big Guy!
Thats pretty close.
neither won or lost here. within a second there is more variability with the human. If you have an opinion based on this video you have a bias.
If only they were made in Taiwan.