Thank you for your suggestions on I've been wanting a unimog. I just ordered mine today after my last update you gave me that some aftermarket parts make this handle really well
Great video and nice job keeping the mog centered and clearly in the shot. Love the mud runs! I just installed the same tires on my gray mog yesterday with heavy brass Injora wheels. Note that the servo issue is being caused by the front tires jamming in the fender during lean angles and turning. It needs a little more clearance due to the wider and slightly taller tire. Trim the fenders or maybe a slight Body lift?
Thanks very much 👍 Yeah rubbing can cause that, but also the stock servo struggles with heavier wheels, had the same issue on my K5 and FCX18 when running brass wheels. 👍Need a stronger Servo. 👍
The bigger tyres make it’s more scale honestly, these rigs are supposed to be huge, that’s why they’re a little bigger than scx24’s cause they’re bigger in real life
Did you have to trim the inner of the 1.0 tyres to fit on the RCAWD 1.3s? Just had some of the1.3 Cyberwheelz arrive and wondered how easy they''d be to fit.
No, just fitted them as is. With these 64mm tyres, the 1.3's worked really well. On a smaller tyre, it does puff up the foams a bit. Hope you like the wheels and used my discount code? 😉😁
Good review, cool footage 👍🏻 How was it to fit the 1“ tires on the 1.3“ rims? And how is the tire rubbing while fully articulated and full steering in your opinion?
Thanks very much 👍 Yeah it was fine fitting them, the only downside sometimes can be the bigger inner ring can puff up the foams. The tyres are only a tiny bit bigger than stock, so didn't rub much tbh. 👍
Very nice awesome run mate those tires are beastly they perform extremely well on the mud good job 💪 i got the 68 mm DJ CRAWLER on my 4m H.T. ford and they are awesome 👍
@@DoURC I put every of my RC in the 4 season outdoors ,mud,water,rocks i never spare any but i think this Mog is so nice at super low speeds i only play in the dry with ha ha.
I would think the driver would, but the chassis is different. This is using the FCX24 chassis, whereas the Mogrich was different. So you won't have portal axles etc on the Mogrich, so tyre clearance could be an issue. 👍
@alandavies7400 No worries. To get the figure in, it's like 8 screws or so. Body is held on with 4 screws, then interior is screwed into the body with 4 more. You just need a teeny tiny Phillips head! 😬
Thank you for your suggestions on I've been wanting a unimog. I just ordered mine today after my last update you gave me that some aftermarket parts make this handle really well
Excellent, hope you like it and glad the video was helpful. 👍
Great video and nice job keeping the mog centered and clearly in the shot. Love the mud runs! I just installed the same tires on my gray mog yesterday with heavy brass Injora wheels. Note that the servo issue is being caused by the front tires jamming in the fender during lean angles and turning. It needs a little more clearance due to the wider and slightly taller tire. Trim the fenders or maybe a slight Body lift?
Thanks very much 👍
Yeah rubbing can cause that, but also the stock servo struggles with heavier wheels, had the same issue on my K5 and FCX18 when running brass wheels. 👍Need a stronger Servo. 👍
Love my swamp claws. Recently finding the Proline Trepadors are performing extremely well. Cheers
Nice, glad someone else likes them too. 👍
Yeah I saw Cape Crawlers had reviewed them recently, they look good. 👍
@DoURC Review coming soon, I've been testing them on several different crawlers. The plastic beadlocks though 😮💨
I have to get this next!! Love UNIMOGS !!! I really like those tires also!! I like big tires!! It looks awesome!!!
Thanks very much 👍
I love the look too, think it looks awesome.
It's a great rig, definitely my favourite FCX24 👍
Wow it tore that mud up!
Great wasn't it. Such a difference with the Swamp Claws 👍😎
@@DoURC Mine is arriving tomorrow. I'll be sure to do some hop ups. When I saw this upgraded version of the Mogrich it was a sure buy.
@@DoURCDoes your code work for all RCAWD parts? Injora?
The bigger tyres make it’s more scale honestly, these rigs are supposed to be huge, that’s why they’re a little bigger than scx24’s cause they’re bigger in real life
I love it with the big tyres, makes such a cool mud truck. 👍😎
Hola! Es el mismo chasis de la K5 1/24? En ese caso podría comprar el body completo. Quedo atento . Gracias por tus videos, gran Canal!
Yeah, same chassis as the K5 and Power Wagon, just a different body. 👍
It looks so natural in the mud! Haha dope
🤣 Thanks very much 👍😎
It’s meant for the mud
@@LowLifeMiniBikes Certainly is 👍😎
@@DoURC I’m getting one now lol I just need to talk my dad into letting me spend my money
Just got mine unimog and it is awesome! Hope fms will release 6x6 Fcx24 or fxc18 model someday.
Glad you like it. 👍
Yeah that would be awesome if they did. Something nice and scale but with the fcx performance 👍
I believe They have 6x6 chevrolet truck
@spidervadventures8107 Yeah they do, but it's not as good as the FCX24 platform. 👍
Great video ❤️🔥
Thanks very much 👍
Did you have to trim the inner of the 1.0 tyres to fit on the RCAWD 1.3s? Just had some of the1.3 Cyberwheelz arrive and wondered how easy they''d be to fit.
No, just fitted them as is. With these 64mm tyres, the 1.3's worked really well. On a smaller tyre, it does puff up the foams a bit.
Hope you like the wheels and used my discount code? 😉😁
Thanks for letting me know! I'm about to receive the Injora 72*27mm tyres, so I hope they'll be fine! 😀Thanks for all the vids.
@@arseyrc Cool, they're making some great tyres at the moment. 👍
Good review, cool footage 👍🏻 How was it to fit the 1“ tires on the 1.3“ rims? And how is the tire rubbing while fully articulated and full steering in your opinion?
Thanks very much 👍
Yeah it was fine fitting them, the only downside sometimes can be the bigger inner ring can puff up the foams.
The tyres are only a tiny bit bigger than stock, so didn't rub much tbh. 👍
Very nice awesome run mate those tires are beastly they perform extremely well on the mud good job 💪 i got the 68 mm DJ CRAWLER on my 4m H.T. ford and they are awesome 👍
Thanks very much 👍
Yeah I was really happy with their mud performance. 👍
Ah nice, I need to try some of the DJ Crawler tyres, they look good. 👍
@@DoURC yes they are mate definitely try them ✌️
@@NWrcadventures Thanks very much 👍
great video and this unimog is a beast now,any proposal for better servo?
Thanks very much, yeah I'm really happy with it. 👍
Not yet but its something I'm looking into. 👍
Lovely muddy video!
Thanks very much 👍😁
Ja geile Pellen noch bisschen Gewicht im Mog unterbringen dann geht der richtig gut.Tolles Teil.
Yeah it's much better with some low down weight and better tyres. 👍
these are the tires i got these are so amazing!!!!
Excellent, glad you're happy with them. I was really impressed with them. 👍
Cool! I want a bit more wheelbase .
The FCX24 is quite short. Be awesome if they did an FCX18 Unimog 😎
@@DoURC I put every of my RC in the 4 season outdoors ,mud,water,rocks i never spare any but i think this Mog is so nice at super low speeds i only play in the dry with ha ha.
i'm currently building up the fcx18. i'm gonna do this one next
Nice, it's a really nice rig, really happy with the first upgrades. 👍
Is there any reason these mods wouldn’t fit the Mogrich?
I would think the driver would, but the chassis is different. This is using the FCX24 chassis, whereas the Mogrich was different. So you won't have portal axles etc on the Mogrich, so tyre clearance could be an issue. 👍
@@DoURC thanks for the reply. I haven’t used my Mogrich so I forgot it doesn’t have portals 😂 oops!
@hondafrk 🤣 No worries 👍
The Unimog is definitely my favourite FCX24 right now, looks great and is a little machine. 👍
Great Video thank you for the info Jo
Thanks very much, glad you enjoyed it. 👍
😊 very nice
Thanks very much 👍😁
nice bro
Thanks very much 👍
👍nice👍
Thanks very much mate 👍
This truck small or big
Small, it's 1/24 scale 👍
@@DoURC thanks how is quality and battery life
@rashidmohammed920 Yeah good, I have a full review in my Reviews playlist 👍
Hi, can I ask what scale or height the driver figure is please?
Yeah, it was a 4" figure, as in 4" total size. 👍
Great thankyou, and is there much work involved in getting the figure inside, as I don't think the doors open do they ?
@alandavies7400 No worries. To get the figure in, it's like 8 screws or so. Body is held on with 4 screws, then interior is screwed into the body with 4 more. You just need a teeny tiny Phillips head! 😬
Tires way too big for it..... :(
Nah I love the tyres. Not going for scale, going for mud ploughing rig. 👍😁