5 Common HOT TUB PROBLEMS and Solutions | Swim University
ฝัง
- เผยแพร่เมื่อ 30 ก.ค. 2024
- We’re talking about some common problems you might have with your hot tub and how to troubleshoot them.
💦 Get 10% off our hot tub maintenance video course and ebook by using the promo code VIDEO: www.swimuniversity.com/hot-tu...
👍 Our Favorite Hot Tub Maintenance Gear: www.swimuniversity.com/hot-tu...
⏰ Timestamps:
00:00 - Introduction to Hot Tub Problems and Troubleshooting
00:21 - #1. Hot Tub Won't Heat
00:39 - #2. Jets Not Working
01:10 - #3. Control Panel Displaying An Error Code
03:02 - #4. Pump Is Making A Loud Noise
03:24 - #5. GFCI Breaker Is Tripping
04:15 - Water Chemistry and Maintenance Tips
📺 Subscribe to our channel if you want more information on swimming pool and hot tub maintenance: / swimuniversity
Swim University®️ has made swimming pool and hot tub care easy for more than 10 million homeowners. And each year, we continue to help more people with water chemistry, cleaning, and troubleshooting. We know taking care of a swimming pool or spa can be difficult. And it’s hard to find a trusted source of information. We get it! This is the reason we created Swim University®️.
😎 Visit our website for more in-depth information on spa maintenance and care: www.swimuniversity.com/ - แนวปฏิบัติและการใช้ชีวิต
Do you have any issues with your hot tub?
My Coleman spa was giving me a DRY and FLO error. This occurred because the low speed on Pump 1 was not working. I replaced the pump and all is fine now. I’d like to figure out why low speed didn’t work but high speed did. Replacing the capacitors didn’t solve the problem. Thanks for the vids!
@@IIWII9 likely different coils for each speed
My hot tub was reading 53F and would not allow me to change any settings, so I turned off breaker and turned it back on....now hot tub will not power on at all!! Please HELP!
Swim University please HELP
Legacy Whirpool jets not turning off unless the power is turned off. Usually has 3 settings, off, low, and high.
Thank you! I’ve become an armchair plumber, electrician, and hot tub repair woman thanks to error codes, trouble shooting, and videos like this!
Hi I have a portable spa the heating is perfect, it's a one speed jet and last week the pressure was perfect, this week I noticed the jet pressure is working but not as strong, what does this mean? the spa is at least 10 or more years old if I need a new pump how much can I expect to pay to have it replaced? thanks for all the I nfo you put on your channel very helpful.
Hi there how often should I replace my filter?
I clean it often but I have not replaced it with a new one for 2 years. I now have the FLO message and jacuzzi will not heat up, thinking maybe replacing it might be the issue after your tips.
my Nordic spa has 3 lights flashing and the tempeture drops. when I shut it off for a few hours it works properly for a couple days. I have put a new filter in but didn't stop the problem. thanks
gfci tripped the other day, flipped it back on. lights work, heater light comes on. switch for pump clicks but no pump. tried water hose in filter hole, thought we had air lock. also opened little valve on the pump, water came out, still no flow. need to figure it out fast! 19 degree days coming by weekend!! Masterspa mas260 Please help!!
my 2005 hydro spa went from Fahrenheit to Celsius on the top display. How do I get it to read Fahrenheit again?
I have in tax got tub when I turn on the power button it never comes on it just make a beeping noise
If my tub losses 4 degrees in one hr with cover off when it's 40 degrees out..do I need a new element?
So my GFCI trips from the 20 amp the 30 amp for the heater is off. I unhooked everything possible both jets the circ pump the ozonator even the control wires and the light and the gfci still trips but not if the 20 amp breaker is off. Any clues or do I just need to break out the multimeter and go fishing?
my dads haveing a problem his hot tub filter cover keeps blowing off when he kicks on num2 pump got new lid still same problem any idea's would be greatly apreciated
Great video. We have a problem where the program light is flashing on and off and the digits are flashing? I cant get control over my tub. I usually press set but its not responding? Any ideas?
Hey there, just watch your video. I just purchase a used spa jacuzzi J-355, 2007 and hoping you can help me with my problem. The spa have 2 jets. Jets 1 works fine but jets 2 witch is for the big jets and the heat is supposed just like jet 1 to last for 20 minutes. But after the first 20 minute when it stop, when you make it start for another 20 minutes after 5 minutes the jets 2 stop and we can't make it start again by pushing the button. After 5 minutes of not working, it's start back by itself? What can it be? Is it a programmation problem or is the pump overheating? Hope you can help me. Thank you.
I have a question. #5 my gfi doesn't trip but the sub main does. It might be 30 mins or 3 days before it trips. Maybe heater element? What do you think.....
I'm getting a P50 error code on a turbo touch control panel..what's it mean? Ty
Ok so I have an issue with my hot tub if you could help. The flow switch isn’t working so I have ordered a new sensor but for the moment overriding the flow switch.
The pump jets work and the jacuzzi says heat. Temp shows 72degrees trying to get to 85. Pumps run for a little while but water is very slow to heat but then all shuts off and I get the OH (overheating) error code.
What could I look at next? Temp sensor? Circulation pump? Heating element?
i have a diamond back by spa builders about 2006. both pumps working along with blower but after opening all valves both lounges have no jets working yet when I turn on pumps low and high they work part of the sides where seats are located . any ideas what to check. the model LX-15A with 2500 digital control all buttons seem to work. another question: light not working but light on panel comes on...can bulbs be changed from inside panels??? where can I get a PDF download for this unit? Thanks all contact numbers on this unit all disconnected...thanks
Thanks Dude! We owe you a beer!!! Best of luck!
I have pool & spa and set the must speed on the pump and moved the jandy valves for the spa jets and dont work . Why? I can't find the jets air pipe to make jets to work. Any one know why?
Do you have any tips on Power Outages and how it can affect your spa? CA had power outages and now my spa is dead. I reset all brakers and NOTHING!
just my main pump trips the circuit. I just replaced this pump a couple of years ago. Any suggestions?
Love the video. Covered a lot of issues in a short and efficient manner. Recently I replaced my control panel for the second time because I didn't seal the first one with sealant that is made for pools and spas. Then the circulating pump went out so I replaced that. Now it won't heat but I am not getting any error codes. How do I determine if it is the heater or the board?
I added a new heater replacement of exiting one but now the SPA takes a really long time to heat. For example from 65F in 24 hours only go to 87F - any idea what may be causing this issue ?
Can I hook up a timer to my spa to have it turn off at 9 pm and turn on at 6 am
Can you take the motor off the inter portable hot tub without draining it
Hey Matt... My hot tub, which is very new, the temp was sticking on 106. after 6 month, the company finally came out. they said my filter schedule was too long, which they fixed. now? my hot tub won't heat at all. do you think my heating element is burnt out from running high for so long?
I have a Hydro spa keep on about. 90 degrees. it got so hot couldn't. get in it cut it off till next day would. not. heat could. it be. element
we were putting a yellow thing in the filters to help and it got sucked up how do I turn the suck off
a year ago i got my hair stuck in the filter and one person was in the hottub ripping it out and the other 3 were trying to tip the hot tub to remove the water.
I have a coleman square 8 person hot tub, ive replaced water with no issues before. This time, i replaced water and filter and now it wont turn back on. Any duggestions????
So confused!! I have a lazer plus spa and having problems with the heating. It comes on every 12 hours and runs but having problems with the temp. It is set on 95 but stays around 92. When it runs it cycle it has jumped as high as 100 and then goes back to 92. When I raise the temp control it will not come on by itself, I have to push the jets button and it will come on. Last week I had it set at 104 and when I went to get in it was 105, got in and the temp dropped to 98 in about 1 hour time. Do you have any clue what the problem might be?
Pumps, kinked hose lack of water flow, lack of wiring. Etc. Hire a professional.
I work on hot tubs but I'm not a repair guy I could be wrong. By those time I'm sure you either got a new tub or repaired but, just tryna help you out.
I have a m spa lite and it comes up with e1 what does this mean
Hi which link in description is for the Dan from Poland Spa reference? Thank you!
What does the 'Dashes' display mean? This is on a Marquis hot tub.
Dr. wellness October 2 codes e 56 and ecp spa not heating right and shuts off on its own
Thank you fór easi tip i call profesionál
My intex spa has no power to it. What problems and solutions should I be looking at
So my hot tub has power, there are no error codes - but the temperature has dropped a lot and my jets won’t turn on. Will the hot tub still head if the jets don’t turn on.
Also, when I click on the jets, I hear a click but nothing happens.
Please help!!
Hi there .do you know why my light inside of hot tub calspas is flashing?
Does it usually take hours for a bit tube to get hot
How do i get my inflatable hot tub up and running after I turned it all off. Reset not goin on?
Thanks for your videos. They are helpful. I got a lot of scale on my hot tub and most of it has come off using white vinegar. There is one area which is really thick and wondering if there are options which might help to dissolve the scale. Thank you, CM.
white scale will be more common in areas with 'hard water' (e.g. lots of minerals in the water), this includes large parts of Texas, Fla and Arizona
@@f.rapaport8733 Thanks, I agree!
My hot tub is 14 years old and never had one problem with it. It appears all is working but I can't keep the hot tub clean for some reason. I drain, fill up, check levels to ensure they are correct levels and replace filters (several times) and within a week the water smells and is slimy. any recommendations before I hire a professional to come out?
Hi my hot tub doesnt heat up what do I do?
Extremely weird.... I inherited my jacuzzi j355 when I purchased my house, I turned it on and the errors change filter, cool and flo were on the screen. I replaced the filters but it still has the same error messages.
What do I do next? The manual is terrible and there is no tech support from jacuzzi 😖
I recently also inherited a jacuzzi j355 tub my screen is locked and I cant cind anything to help me unlock it do you know?
on general item number 4 the speaker confuses motor with pump. these are two very different things.. please correct the comment.
My hot tub seams to be loosing water about 4 inches a week it is about 6 years old. We don’t see where any water leaking tho. Is this normal?
I was given a free hot tub got it all hooked up there is 2 suction fittings but only one is working marquis RECREATIONAL SERIES. Do you know?
I have the same exact spa and I believe the other suction fitting is for the option to add another pump and tie it into your existing return line for stronger jet flow. That's my guess but I'm having a problem with my spa every time the spa gets up to temperature or we're done using it and we turn it off or it shuts off on its own and FL displays on the spa side controller and you can't turn the spa back on until you unplug it and plug it back in then you have to sit there and repeatedly hit the Jets button until it comes back on any ideas is it because I don't have it ran straight to the breaker box?
what does the error code f5011 mean
my grandfather just bought a 2017 hot springs hot spot rythm. i just got out of the hot tub and was wondering why the jet power was not as strong as the wet display one was. thank you for the video!!!! im so glad you made this vid because pops freaked and thought we purchased a faulty tub. i just turned the jets to the tight and it flowed perfectly!! thank youuuu
👍
my neighbor has a hot tub 2 motor system. the #1 low speed motor doesn't work when button is pushed #2 / high speed works fine. There is no click or hum from #1 motor
My Hot tub has a light that varies in colors as a ? light that turns red to green to blue to yellow . Now the light flashes while changing colors and finally stops on red then shuts off. Very disconcerting and I finally shut it off. Model FP100C
I just had a new pump installed in my hot tub but the pressure from the jets is not strong.. Any suggestions?
The pump is most likely not the same horsepower as the old one they replaced.
l have a Rimini spa bad or hotub , that is about 8 years old. I am in Sweden, We noticed a while ago that it did not seem to have full power, when pushed on full power, the flow was weak, everywhere. We also said to ourselves, that we think that we had 2 power settings, you pushed it in and got like 50% bubbles and then pushed it in again for full bubbles. But we only seemed to have one setting now full and off only. I know the pump is 2 speed, says on it. So I took the pump out and took it apart, noticed that the impellor was half missing, all broken, So I thought great was impellor, ordered a new impellor and seals, just the same, pushed the jet button on, which again only full mode, hardly any flow. could not believe that this was not the problem.
And then after testing it for a good few times, the jet button refused to go on to full bubbles, I am thinking that this is some safety cut-off switch inbuilt. I thought for a while that possibly the pump smelled like it was burning just a little. I have taken out all the jets, emptied the water, blasted a hose through all of them, thinking that if 50% of the impellor is disintegrated, then bits must be stuck somewhere. Some small bits have come out. very small though. I am wondering if I need to buy a new pump, Just hope it's not the motherboard or control panel. Because the pump has not 2 speeds working, or something is definitely not right. What's your opinion. Is there something else I need to check? I am cracking up, not finding the problem, Could it be the capacitor? I am hoping a new pump will solve the issue. Appreciate your opinion thanks.
HI ,I have a small Intex spa ,& keep getting code E90 ,I totally cleaned the water sensor & it does not look like the water is flowing ,but I have the bubbles going,could these mean it is the water pump needs replaced .
leona bergman how you fix it
I have a tiger river spa and when i filled it to proper level and then turned it on the jets work along with light.. So i shut it down so it could heat up to 103 the power light would stay on n with in 15 mins it would start to blink.. What does this mean????
christopher trigo Same thing happened to me. Was worried about all sorts of serious problems. We checked the water flow. Noticed that the water flow was very low through the filtration system. The bubbles were working just fine. Took the filters out and it stopped turning off. It turns out, though the filters didn't look so dirty, deep inside the filter folds, there was chemical buildup. Changing the filters often solved this problem.
Hello, I have no error code, replaced both heater relays, all fuses are good, brand new heater, no air lock, and all jets are open. The heater light is on but it just isn’t heating. Any ideas?
Thank you for taking the time to post this helpful information.i dont hire professionals to take a tub with me,I hire them so they leave afterwards.Wait what's your definition of a professional🤣
when I push my jet button on my cal spa there is a pop and it blows the pump1 relay and ideas what can be causing this?
Proj
M
I have the same problem, did you find a solution? I have a cal spa with the same problem
Sanding can be causing that popping cause it wont tighten down properly if it isn't round sanded properly.
What do I do if I am the professional and trying to learn more about this stuff.
How do I turn the hot tub into a cooling mode or a low temp mode for the summer ? It’s very hot
just turn the temp down as low as it will go
What if if my Jets 1 won't turn off. Only cycles through low and high cycle and won't even turn off when I set an automatic timer too. Jets 2 work fine and everything else is working.
Do you have a link to your friend for air flo?
QUESTION/// i did a noob thing and feel the need to ask if this is a big problem or not.... i drained tho hot tub wiped it down and filled it up, yet after i filled it up, I FORGOT TO CLEAN THE FILTER sooo i took the cap off the filter and umm water over flowed and went under the cabinet where uhh all the components are and thay all had water going over it i tried to dry it with a towl after i took the filter out and the seal back on... is there a reason for concern? or will it be a maintenance prob?
Could be. If you feel concerned, I’d have a pro come out to look at it.
Ok so for the basic beginner without trying to make someone else money... do I need to wait for it to come to temp for the dials to shut it off?
My circ pump and jet pump are not turning on. I connected them to a 115v line direct and they work. When i connect them to the board they do not turn on. Heater works...flow switch works. Filters are clean. I am not getting a voltage reading at the contact points for these pumps on the PCB. Do i need a new board or just change out the relays on the board?
Softub Power lite keeps flashing, I hit rest and it goes, now nothing, the water is hot, and I mean hot....????!!!
My mspa blower valve is jamming and blower runs but I got no bubbles ??
Mine has stopped working, I have r1 and 269 as an error code, can anyone provide a suggestion please?
Hello I need Heater Element Info Please
Pump turns on just long enough for water to start out of waterfall then stops running. ??
Will and airlock make the GFI trip ?
Hamlet the Puppet I would say no, a GFCI (in very lame terms) trips when the current going out of the breaker dose not equal the current coming back which means current has found somewhere to go other then where it’s supposed to go (which is dangerous) I don’t see how air lock in a pump would cause that unless the pump is leaking water all over the motor electrical components which is unlikely
I have a small issue. My jets #2 button doesnt work when I push it. For about 2 months I noticed I had to push it harder to activate. ?? #2 was my favorite jet
probably have to replace that pump
was it the topside controls?
How do I fix a diverter valve that is stuck in the up position?
Not sure. It depends on what type of hot tub you own. Check with the manufacturer
Sorrry... my hot tuns no have signal in the control panel..!! Help please..!!
can u tell me why would my hottub which i just filled n n started it n ran for 6 hours n shortly after i got in it it shut off n started to drain on the by itself , at this power went out only on on hottub
i 2003 5 man hydropool self cleaning hottub
I HAVE A THERMO SPA ,NOT WORKING ,ERROR CODE SNB ? CAN'T FIQURE OUT WHATS WRONG
My Sundance Chelsee 780 Jet #2 just stopped working abruptly. If I press the button I hear a distinct click, but nothing turns on. Jet 1 and everything else seems to work fine. Any suggestions?
Additional info: under normal operation, if i turn on both jets to max speed, the heater turns off. The funny thing is that the heater still turns off when i activate both jets to max, even tho only Jet 1 is working.
was it the pump capacitor or the board? the click was the pump relay.
@@VIPPoolsandSpas I haven't fixed it yet, actually. Was going to replace the entire pump, but sounds like the issue could be somewhere else? Any suggestions are highly appreciated.
@@RunningInSuits check fuse (not sure if that spa pack as any). Also check to see if the spa pack motherboard as any burnt marks or smells burnt. Test the pumps capacitor. Or, find out the relay that's clicking and tap on it ( you need 2 people for that one). One person to tap it and the other keeps pushing the pump button. First fuse, then capacitor test, after that it might be the motherboard.
I decided to clean my filter in my hot tub and I forgot to take out my little foam star and my hot tub was sill on. The star broke off in peaces and went through the plumbing, How do I get it out? HELP!!!
First you should turn the power off to the unit and disconnect the power. Then you're going to want to drain the whole thing (be sure to get as much water out of the pipes as possible). I would suggest getting 3-4 of your strongest buddies over for the next step. Load your spa up and haul it to the dump because you're obviously not qualified to own a hot tub.
Sad part about hiring a professional is getting a hold of one. Seems like everyone is backed up or don't answer.
My hot tub audio keeps going away what do I do
I have a brand new intex octagon 79x79x29 and I tried to use the sanitation button for the first time, but it beeps and shows error code E91.. The book says that it's an alarm code (for low salt level) but we are not using salt water..freshwater.. so how can I sanitize and get past the Error code and beeping? It's only 4 days since we put it up, so I wouldn't think that it would have error problems... I did clean the filters out anyway.. Thanks, hope you can help..
Barry Hayes Thank you, I will call to find out.. Still having same issue.. not a lot of videos or current info on this particular spa..My friend has an intex one with just the massage bubbles and she doesn't even have these options that I have on mine, so she couldn't help either..
the sanitation button on those spas needs salt in the water to produce the chlorine for sanitation.. its normal if you did not disolve salt in it and press the sanitize button to get this error
TH-cam hot tub fixes
flow pressure switch!
Do u have any ideas on why my hot tub is Shocking me when I touch it
bad ground
Stay out. It can kill you. Get it fixed
Wiring in water test didn't catch it when they checked everything and it got sent through anyways.
Hire an expert. That's the common theme here.
I got all 4 bearings for my pump motors at the auto parts store for $20. Also both pump impellers and seal kits on eBay for $80.
Mine says "hot fault" what can this be?
What if your pumps work but are not turning on and you have the 3 dot error code? What could the issue be?
pressure switch
Why cant I get my filter to Actually filter the water. Please help
NO LIGHT SAYING HEATER IS ON THE PANEL ITSELF ? CONTROLS UP TOP SAY HEATER IS ON? GOT GOOD WATER FLOW. SEEMS LIKE NO POWER TO HEATER?
Codes displayed are “--“, “308”, “r1” and “l1”. Just had emptied out the tub and then turned it back on and these were the codes
Did you figure out what the issue was for these codes?!
my. light is showing. unit. is heating. but it's. knot
you use to many periods
Error C15?
Motor runs every 5 or 6 minutes?
there is supposed to be motor activity every so often to make sure the water isn't stagnant
My tub gives a pr code?
No bubbles in my hot tub
i just put in a new pump and now the system comes on ant locks in flo mood
Charles Dunn. Figure anything out?
What about a loud noise seems like it's coming from transformer
Forgot the hr error code.
Me too, mi !
Didnt even mention sleep mode for no heat issue #1.
Yes! Figure out anything...mine always says FLO!! and no heat! :(
Why hot tub stuck with 80 temp and won’t go up to 104
You probably have a burnt heater connection at your control board.
New hot tub start up: all things as prescribedmotor clicks then does nada...
My hot tub comes on for about two to three min and goes off
mine too!