Awsome video mate👍🏾. I need a little help, a changed the power supply to a atx but the atx only has a -12v output instead of -5v output. What is the -5v wire for? The pcb has a green light but im getting no picture or power to the crt.
i really need your help! i have a broken jamma harness for a pandoras box 4. it has six buttons and a credit and start button. i have been trying for so long to find jamma harness wiring that is fully soldered but everyone i ask say no :(
Yeah not in the Kip community, weird that amazon doesn't say who the item was gifted by, but yes it was myself for the coin slot, coin door, power supply, and the board back in August.but yeah you thanked me back in messages on the arcade part 3 I think you were on when asking for donations.
but what I would suggest doing is buying heat-shrink tubing and running the wires through that, kind of works out a little more expensive than cable ties, but makes the wiring more managable and tidy, and traceable, just make sure it is wide enough for the wires plus any connectors to pass through, you don't need to heat the heat-shrink allowing the wires to come back out, but also allows for more flexability than shrinking the tubing.
nice video you have i use the VGA video boards all the time a original board is the GBS 8200 Video board i see in your video you have a HACK Board all the boards with the HCKL is a hack board not original board the firmware is not the same the Hack boards do work but they are not 100% up to date with updat firmware.
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [Official MV]](http://i.ytimg.com/vi/NBw1jF342vw/mqdefault.jpg)
Looking good, thanks Kip 😀
Cheers Mike!!
Awsome video mate👍🏾. I need a little help, a changed the power supply to a atx but the atx only has a -12v output instead of -5v output. What is the -5v wire for? The pcb has a green light but im getting no picture or power to the crt.
I think a lot of games need -5v to work as it’s part of the JAMMA standard
i really need your help! i have a broken jamma harness for a pandoras box 4. it has six buttons and a credit and start button. i have been trying for so long to find jamma harness wiring that is fully soldered but everyone i ask say no :(
Six buttons is impossible with just a jamma harness as it only supports a maximum of 3 or 4 buttons. The extra is done by a CPS2 kick harness
@@kiphakes my previous harness had 12 connections all colored for each button. with each button having two connections
Yeah not in the Kip community, weird that amazon doesn't say who the item was gifted by, but yes it was myself for the coin slot, coin door, power supply, and the board back in August.but yeah you thanked me back in messages on the arcade part 3 I think you were on when asking for donations.
but what I would suggest doing is buying heat-shrink tubing and running the wires through that, kind of works out a little more expensive than cable ties, but makes the wiring more managable and tidy, and traceable, just make sure it is wide enough for the wires plus any connectors to pass through, you don't need to heat the heat-shrink allowing the wires to come back out, but also allows for more flexability than shrinking the tubing.
Thank you dude! Much appreciated!
Great tip!!
nice video you have i use the VGA video boards all the time a original board is the GBS 8200 Video board i see in your video you have a HACK Board all the boards with the HCKL is a hack board not original board the firmware is not the same the Hack boards do work but they are not 100% up to date with updat firmware.
Hi I have tekken tag card game but now about it pls help....
Sorry! Can’t help really!
@@kiphakes tekken tag turnament arcad virsion canection .... 😫
Kip. Help. Trying to make my free play into coin. Driving.¹me crazy
You might need to alter some dip switches on the board to take it out of Freeplay
Help