Products that we use and recommend: ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Hi My bmw 1 series steering angle plausibility error code disappears with steering angle sensor calibration . But After driven few kilometers, again pop up same error code. Do you know the reason for that? Thanks
It might be the source of a slight steering problem with my Nissan Rogue. I keep noticing mild effects of something bad when in turns. I had it at a Nissan Dealer and a couple shops and neither of them can find anything bent or worn out. I am not sure if brake pads can have any effect but they are the Wearever gold. I may just get a set from the dealer or a set of the OE brand whatever it is and try them next time since some of it coincidentally seemed to happen after getting brakes done. It is leaving me with a suspicion of a bad or slightly sticky caliper. I don't know and I don't want to spend all of my money chasing it. On one turn going right from a down hill I get a slight chirp even if I am moving annoyingly slow and everyone behind me wants to strangle me! It is not so noticeable if it does it at all when it is raining but wet or dry the steering feels a smidge weird. At night it can cause you to hit a curb making a turn when some jerk is crossing an intersection and blinding you with his lights. Maybe they don't realize they are doing that but half the time in those situations I am silently cursing them wanting them to just go already! Then people wonder why I don't seem to like anyone. It is partly them and partly my vehicle. Partly me wanting them to finally go and let me get on with my night or day while they sit there like the F-ing brainless zombies they are!
Can a bad angle sensor cause the car to pull to the right? After a wheel alignment on my Venza 2016, the car is pulling to the right, no matter what it does. We did calibration several times, but after a while, there was a discrepancy between the steering wheel sensor value and steering wheel angle for about 3 degrees.
Hello My steering wheel is a little hard to rotate to right and left and SAS code has occurred on obd scanner, so does this code cause this issue ( heavy wheel rotating)? Thank you.
I have a 2015 Prius. Traction slip liight constant. I have c1231 so I replaced the SAS with used OEM out of another Prius. Did not fix the problem. I checked every fuse. Did the paper clip 4 and 13 pins for steering callibration. Checked live data: stuck at 850.5 just like before. Turn the steering wheel back and forth 3 times. Nada. Using the Maxicom MK808 I found I could test ABS sensors. It came back that all ABS sensors are abnornal or low and that the master brake booster/ actuator has c1281 low sensor pressure. At this point I'm wondering if I should replace the master brake booster/ actuator with the skid control ecm attached to it. (dome light works fine and car drives perfect)
HI GUY HOPE U CAN POST THIS CAUSE I AM COMPUTER CHALLENGED. 2009 CHALLENGER MANUAL TRANS. ESP BAS LIGHT CAME ON WHEN TIRE CAME OFF CURB OUT OF GAS STATION RAMP N TIRE SPUN.ESP (ELECTRONIC STABILITY CONTROL)BAS(BRAKE ASSIST PROGRAM) I DID ALL THE TRICKS ON U TUBE. SPIN WHEEL ALL THE WAY TO RIGHT THEN TO LEFT. TURNED LIGHT OFF TEMPORALLY. TURNED CAR OFF WHILE IN NUTRAL WHILE GOING 20 MPH N RESTARTING IT. TURNED LIGHT OFF TEMPORALLY. LOOKED INTO STEERING ANGLE SENSOR N FOUND THAT IF THIS HAPPENS TO U , IT SHOULD RESET ITSELF AFTER ABOUT 100 MILES OF DRIVING OR SO.IF NOT,THERE ARE CODE READER DEVICES THAT HAVE SAS ON THEM. THIS RESETS YOUR STEERING ANGLE SENSOR. DO THIS BEFORE CHANGING IT.ALSO WHEN U DO CHANGE IT IT SHOULD BE RESET TO CENTER.
Hi I have almost the same problem as you but I don't think it's the same solution, I'll explain it to you unintentionally when changing the rack I lost track of the steering wheel so I I accidentally turned the steering wheel to the maximum and I must have exceeded the limit it will make a click and since then I have this error message what do you think?
i have 2003 bmw x5 4.4 i have pa soft ware bmw scanner and i am getting erro code watchdog under steering wheel angle sensor also i have open circuti for abs speed sensor rear right and i have already replace abs speed sensor and those pesky dtc abs and brake lights come on after 20 mins off driving. turn off ignition lights go off every time then back on after 20 mins any thoughts
Hi. my 13 GT had The Advance Track needs service light come on and also has no power steering. I was told by auto repair shop the code reader said it was a Steering Wheel Angle Position Sensor. I can't find the Position Sensor and Ford says the car does not have one. So I thought maybe the Clock spring does both... Nope. I changed that and still the same. Help Thanks
@@fwybty probably needs calibration. Depends on the car but some steering angle sensors like Ford have it built in into the rack and pinion rack because they are electronic.
Hi. I have vw golf plus 2009 2.0 tdi. If i tilt my steering downwards than abs and traction light come on... Tilting upwards is fine no light.. Any idea what it could be
Hi ,have a problem with my volkswagen Passat sel premium 3.6 2012 I have this code 00778 steering angle sensor mecanic malfunction how can I fix it I see your vidios I like how you help people
Same thing happened with my car, turns out the sensor actually was way off but the back up camera worked flawlessly. Not sure why but I definitely wouldn’t rule it out, never hurts to reset anyways doesn’t take long with an obd
Can you buy a S550 Benz with Engine Headgaskets problems and do a show on that. I think you have very good channel. Can you also do a show on rebuilding the engine on 2012 BMW 528 . Thanks,
i have a 2004 320d e46 and the steering angle sensor rotates freely around the control column. the lights i have on are DSC/Brake Light/TyrePressure light all yellow
Hi, I have 2010 Vauxhall astra j mk6 and the the service power steering fault keeps appearing on my dashboard, it comes on after like 10-15 mins of driving and the steering feels ok though. Do you think this has something to do with the steering angle sensor, on the computer fault checker it comes up saying steering wheel angle signal invalid data. Pleade help thanks
Have you ever solved the problem? I have similar problem on Mini Cooper, steering angle gives good data to computer few minutes, after that car throws error…
Good question ❓ probably because they know nobody has the correct scanning tool to do it or right software. I have the same thing going on and have been trying to buy one to fix it might have to spend a couple hundred dollars to get a top notch tool because he seems to not answer any questions in the comments but I know this video is really old but everyone is asking the same question.
Yh but calibrating it confirms it isn’t working. if u have a code and u calibrate it and the code goes, fault fixed but if u calibrate it and the code stays it’s obviously bad
Products that we use and recommend:
► Panel Removal Set: amzn.to/3YiMADu
► Assorted Fuses: amzn.to/4fx4s3F
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Hi
My bmw 1 series steering angle plausibility error code disappears with steering angle sensor calibration . But After driven few kilometers, again pop up same error code.
Do you know the reason for that?
Thanks
It might be the source of a slight steering problem with my Nissan Rogue. I keep noticing mild effects of something bad when in turns. I had it at a Nissan Dealer and a couple shops and neither of them can find anything bent or worn out. I am not sure if brake pads can have any effect but they are the Wearever gold. I may just get a set from the dealer or a set of the OE brand whatever it is and try them next time since some of it coincidentally seemed to happen after getting brakes done. It is leaving me with a suspicion of a bad or slightly sticky caliper. I don't know and I don't want to spend all of my money chasing it. On one turn going right from a down hill I get a slight chirp even if I am moving annoyingly slow and everyone behind me wants to strangle me! It is not so noticeable if it does it at all when it is raining but wet or dry the steering feels a smidge weird. At night it can cause you to hit a curb making a turn when some jerk is crossing an intersection and blinding you with his lights. Maybe they don't realize they are doing that but half the time in those situations I am silently cursing them wanting them to just go already! Then people wonder why I don't seem to like anyone. It is partly them and partly my vehicle. Partly me wanting them to finally go and let me get on with my night or day while they sit there like the F-ing brainless zombies they are!
Is this obd can do calibration for acc? Collision avoidance assist?
Brilliant and thank you so much for all your great videos, also love the accent.
Kind regards Jay
Can a bad angle sensor cause the car to pull to the right? After a wheel alignment on my Venza 2016, the car is pulling to the right, no matter what it does. We did calibration several times, but after a while, there was a discrepancy between the steering wheel sensor value and steering wheel angle for about 3 degrees.
Hello
My steering wheel is a little hard to rotate to right and left and SAS code has occurred on obd scanner, so does this code cause this issue ( heavy wheel rotating)?
Thank you.
Which basic scan tool would you recommend for 2008 Mercedes that can accomplish SAS calibration?
Thank you so much 😊
Angle sensor is mounted on the clock spring?
You’re the best, thanks doggy
I have a 2015 Prius. Traction slip liight constant. I have c1231 so I replaced the SAS with used OEM out of another Prius. Did not fix the problem. I checked every fuse. Did the paper clip 4 and 13 pins for steering callibration. Checked live data: stuck at 850.5 just like before. Turn the steering wheel back and forth 3 times. Nada. Using the Maxicom MK808 I found I could test ABS sensors. It came back that all ABS sensors are abnornal or low and that the master brake booster/ actuator has c1281 low sensor pressure. At this point I'm wondering if I should replace the master brake booster/ actuator with the skid control ecm attached to it. (dome light works fine and car drives perfect)
hi.my peugeot have a speed control fault.is the steering anger need reset?thank you
HI GUY HOPE U CAN POST THIS CAUSE I AM COMPUTER CHALLENGED. 2009 CHALLENGER MANUAL TRANS. ESP BAS LIGHT CAME ON WHEN TIRE CAME OFF CURB OUT OF GAS STATION RAMP N TIRE SPUN.ESP (ELECTRONIC STABILITY CONTROL)BAS(BRAKE ASSIST PROGRAM) I DID ALL THE TRICKS ON U TUBE. SPIN WHEEL ALL THE WAY TO RIGHT THEN TO LEFT. TURNED LIGHT OFF TEMPORALLY. TURNED CAR OFF WHILE IN NUTRAL WHILE GOING 20 MPH N RESTARTING IT. TURNED LIGHT OFF TEMPORALLY. LOOKED INTO STEERING ANGLE SENSOR N FOUND THAT IF THIS HAPPENS TO U , IT SHOULD RESET ITSELF AFTER ABOUT 100 MILES OF DRIVING OR SO.IF NOT,THERE ARE CODE READER DEVICES THAT HAVE SAS ON THEM. THIS RESETS YOUR STEERING ANGLE SENSOR. DO THIS BEFORE CHANGING IT.ALSO WHEN U DO CHANGE IT IT SHOULD BE RESET TO CENTER.
I have e90 can I program/match a used steering angle sensor to my car. What will I have to do?
You guys are the best💯💯💯
My SAS reads 475 degrees when steering is straight! And I can't find tool to align it because its an old alfa romeo.
I have a question, what is a lateral acceleration sensor on a 2013 Mercedes Benz c250
Hi I have almost the same problem as you but I don't think it's the same solution, I'll explain it to you unintentionally when changing the rack I lost track of the steering wheel so I I accidentally turned the steering wheel to the maximum and I must have exceeded the limit it will make a click and since then I have this error message what do you think?
My bmw 118i e87 window controller buttons lights not coming on when I switch on the lights
i have 2003 bmw x5 4.4 i have pa soft ware bmw scanner and i am getting erro code watchdog under steering wheel angle sensor also i have open circuti for abs speed sensor rear right and i have already replace abs speed sensor and those pesky dtc abs and brake lights come on after 20 mins off driving. turn off ignition lights go off every time then back on after 20 mins any thoughts
👍🏽it’s quickly but very good 👏
Hi. my 13 GT had The Advance Track needs service light come on and also has no power steering. I was told by auto repair shop the code reader said it was a Steering Wheel Angle Position Sensor. I can't find the Position Sensor and Ford says the car does not have one. So I thought maybe the Clock spring does both... Nope. I changed that and still the same. Help Thanks
If it's bad can it cause the steering wheel to turn all the way to the right after starting while car is in park???
My car is doing this after changing my rack and pinion did what did you do to fix this problem please let me know if you see this message
@@fwybty probably needs calibration. Depends on the car but some steering angle sensors like Ford have it built in into the rack and pinion rack because they are electronic.
Hi.
I have vw golf plus 2009 2.0 tdi.
If i tilt my steering downwards than abs and traction light come on... Tilting upwards is fine no light.. Any idea what it could be
Hi ,have a problem with my volkswagen Passat sel premium 3.6 2012 I have this code 00778 steering angle sensor mecanic malfunction how can I fix it I see your vidios I like how you help people
Hi, I have exactly the same problem. How did you fix yours?
I replaced the 22" wheels on my e65 with stock 18",would that cause a DSC light?
I hear a loud screech when I turn right on my vehicle. Diagnostics give me a U1232 code. Is it related?
My car gives code of steering angle sensor but it is working because whenever I turn steering, the camera grid lines move. What's the cause than?
Same thing happened with my car, turns out the sensor actually was way off but the back up camera worked flawlessly. Not sure why but I definitely wouldn’t rule it out, never hurts to reset anyways doesn’t take long with an obd
@@117spear yeah but which obd is the question besides the one he used
Can you buy a S550 Benz with Engine Headgaskets problems and do a show on that. I think you have very good channel. Can you also do a show on rebuilding the engine on 2012 BMW 528 . Thanks,
excelent thanks a lot for always make the videos and help whit the veicle i look your videos and your jobs on my shop and i like
I got an alignment and traction turned off sometimes it turns back on but then it goes off again
is the steering angle sensor usually loose around the control column or does it lock into place?
i have a 2004 320d e46 and the steering angle sensor rotates freely around the control column. the lights i have on are DSC/Brake Light/TyrePressure light all yellow
Hi, I have 2010 Vauxhall astra j mk6 and the the service power steering fault keeps appearing on my dashboard, it comes on after like 10-15 mins of driving and the steering feels ok though. Do you think this has something to do with the steering angle sensor, on the computer fault checker it comes up saying steering wheel angle signal invalid data. Pleade help thanks
Have you ever solved the problem? I have similar problem on Mini Cooper, steering angle gives good data to computer few minutes, after that car throws error…
Why are safety add-ons so expensive to repair?
Good question ❓ probably because they know nobody has the correct scanning tool to do it or right software. I have the same thing going on and have been trying to buy one to fix it might have to spend a couple hundred dollars to get a top notch tool because he seems to not answer any questions in the comments but I know this video is really old but everyone is asking the same question.
The steering buttons lights then not coming on
That showed how to calibrate it but not really how to check to see if it's good or not.
i second that
Yh but calibrating it confirms it isn’t working. if u have a code and u calibrate it and the code goes, fault fixed but if u calibrate it and the code stays it’s obviously bad
Hi when I replace a fuel pump on my 335i do I need to program the ekps module ? at the dealership they want $ 2.100 for this job thx
And the head lights switch lights not coming on
If the steering angle sensor bad could dat cause the electrical power steering to not work??
BMW DTC 2008 328i
You don't reply to anyone?
2yrs later still no replys at least he's consistent 🤣
Esp light
Mine is negative 700
Is this the Israeli dude from 90 day fiancé showing me how to solve my problems?
so buy a 3000 dollar scanner for a 50 dollar part?
Hi sir I can’t fix my Benz b200 2011 esp light hep me
Stop saying guys all the time it's annoying 😂
O
Man I love your videos but I have to admit that your accent gives me a headache sometimes.