2007 Nissan Sentra - Lower balljoint falling out of stamped steel lower control arm! Bad balljoint.
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Balljoints fail in all kinds of different ways. Most times you can feel the play by shaking the wheel. Sometimes you only see the play by using a prybar between the lower control arm and the steering knuckle. Sometimes there's no play but it's seizing up. These will make a squeak/squawk when turning the steering wheel back and forth when stationary. And sometimes the whole balljoint can pop out of the control arm itself!
In general I do not like pressing balljoints into stamped steel control arms. There usually is so little material to press the balljoint into that I don't feel comfortable with it. I always prefer replacing the whole arm. They're usually not that expansive anyways. When I do replace just the balljoint in steel arms I'll put some of the green Permatex Sleeve Retainer compound on the knurled section of the balljoint. It's just that little extra to make you feel more comfortable.
Also thrown in is a few tips for changing these lower control arms on a 2007 Nissan Sentra. They are a bit of a pain to do.
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and EUrbanAutoTech makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. EUrbanAutoTech shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by EUrbanAutoTech and therefore, EUrbanAutoTech does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge EUrbanAutoTech or anyone affiliated with EUrbanAutoTech, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.
On my Versa I just changed the whole arm with new ball joint. Going to do the same on my Sentra as the rear bushing is worn and ball joint looks slightly worn. Rock Auto cost $28.95. And BIG thank you for showing the ratchet strap hack...the rest show removing the top nut on both sides of the struts.