ฝัง
- เผยแพร่เมื่อ 23 ก.พ. 2022
- Installing Noico Red 150 mil closed cell foam in my 1st Gen Toyota 4runner and 1988 Toyota Pickup! This is the second layer, aka Noico RED foam that goes on top of the 80mil sound deadening mat. This is supposed to be an insulation heat and cold barrier with excellent thermal barrier properties. I figured if I was going this far, I should finish the job and do it right.
I also used the leftover mat and foam in my Toyota Pickup as I get it ready for a vinyl flooring kit. In the pickup I did the floorboards and headliner. It already had kilmat so I just laid the foam on top of it.
Using both the 80 mil mat and 150 mil foam is recommended by Noico for the most effective sound proofing, vibration deadening, and insulating properties.
Link to silver deadener: amzn.to/3iv879X
Link to 150 mil Noice red deadener: amzn.to/3FdVgBH
PREVIOUS EPISODES:
EP 1. 3RZ 1st Gen 4Runner Walkaround: • 3RZ Swapped 1st Gen To...
EP 2. Removing the 4Runner interior: • Restoring 35 Year Old ...
EP 3. Sound Deadening the 4Runner: • FULLY Sound Deadening ...
Instagram: / _rmgarage
@noicosounddeadener4641 Great product!
#toyota #noico #4runner #rmgarage - ยานยนต์และพาหนะ
Love the 4Runner videos as I'm going through my 1st gen right now as well! I bought an high-boy truck a few years back and it had a couple really thick (like 3/4" to 1") rubber horse stall mats in the back. I loved having them for protecting the bed and stopping things from sliding around. You can cut them for a custom fit and I think they are pretty inexpensive. Might be a good option for the bed of the 4Runner too.
Just stumbled upon your channel, loved the video!!
I know I am late to this video series but wanted to help out with the rear section question about how to prevent damage to any sound deadening or foam. When I had my 89 4Runner, I put down a piece of 1/4 or 3/8 plywood, attaching it to the body and then laying carpet over the top. gave a flat "bed" surface an protected anything underneath.
Foam the bottom and make a template out of wood to remove and add as needed. You can carpet the template and lowes got these awesome rubber mats to toss down over that for easier clean up and wash.
Gives me a great idea for my truck.
Looks good! I’m curious how much different it will feel/sound in the cab when driving. Maybe we’ll be able to hear music now! 😂
Good video bro
Thanks!
Rubber stall mat from tractor supply to protect the rear floor.
I can only imagine how you felt cutting out that headliner, even though it was destroyed.
Didn’t feel great! It was trashed though.
What about spraying the undercarriage of the truck or car with like 3M rubber sealer? And what about the seals at the top of the doors? And then Noise cancellation tires?
Great job! Just out of curiosity, won’t the entire cabin of the 4runner be covered w/ carpet (including the bed); so how come you think the foam would be destroyed as it would live under the carpet layer?
Yeah it will be. I was just thinking about when I load heavy or awkward objects, even with a carpet it may pierce or tear the deadening underneath. It doesn’t really matter but I didn’t think it was worth it to put the foam in the back. That could change!
@RM Garage would you do anything differently? Looks like you didn’t use the foam on the 80 series.
How much weight does this add?
oh
How would that hold up to water that might get inside from driving through creeks ?
I had the same thought and Noico says it “absolutely does not absorb water”. I guess we will see!!
@@RM_Garage thanks I’m probably gonna give it a try. I just got a 86 4Runner and cleaning up the interior right now.
How many square feet of the materials did you have to get?
I believe 72.
For the first layer*** the second layer in this video was only 1 box so 18?
Thanks so much!
how has the sound reduction been since you put it in, thinking of doing it on my 89.
It’s pretty great. Does an awesome job and will do the same thing in my landcruiser.