STARTING THE 4JJ1 PATROL FOR THE FIRST TIME!!! (Sounds Insane)
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- #build #4x4 #offroad
Starting up the 4jj1 Patrol for the first time!! We tune and wire the trans, button up the rest of the engine bay and get this thing ready for a drive! How good!
Merch: roamlyfe.com
INSTAGRAM: Roam_Lyfe
tags: build cost 4wd how to build a rig lift patrol cruiser suspension building offroad overlanding custom ute flat bed tray superior engineering suspension travel flex huge lift remote res coils built build how to fit flexy down travel 4j 4jj1 4jj3 patrol swap gu gq how to build motor swap
Every tool is a hammer unless it's a screwdriver. Then it's a chisel and a light hammer😂😂😂
Hahahaha 😆😆😆
Prybar too
Mate I’m so happy for ya 🙌🏼 you should be super proud of your achievements 🤙🏼🍻
Thanks heaps Adam!! Appreciate it a lot
so sick, got to be the best feeling to have it started and one step closer to getting out on the tracks
I can smell the clay hills 😂😂
Couldn’t stop smiling when she started idling. Love the build mate, keep the vids coming
Good job mate, it’s always rewarding to get a good result after putting in a lot of effort. Sounds mint👌
Thanks mate! Huge effort but worth it in the end!
You’ve done a fantastic job for a home shed build mate. I’m stoked that your so stoked. Well done bro. 👏 🍺
Thanks Darren! So keen to drive it now 😆🔥
Amazing to see it run mate. Best sounding 4J I've heard.
Dosnt sound too bad hey! Keen to hear it with the down pipe!
Congrats on getting it started. Enjoying the build so far 👍🏾
Awesome, thank you! 🔥🔥
If you run a cable from the starter to your double post you'll save the long run to the battery. Just put an inline breaker in of suitable amps. Depending on how many devices you want to run off that circuit, you couls possibly run a 5 way Wago connector instead of the post, which would give you 4 devices up to 35A total.
Hey Tom, huge project you got here. Things have come a long way from Coal. Really enjoying the series keep it up 🤙🤙🤙
The GUs an absolute beast. Cant wait to see it out on the tracks for the first time
This has been a huge project and when it started you could see a weight lifted off your shoulders awesome work now go and have a few beers you deserve it
Haha I’m really glad you could see that, I was so annoyed when it didn’t start 💀! Super glad we got it to run for the episode!
amazing build so far , love this
Thank you!
Congratulations mate. Such a pleasure watching you work and looking forward to what comes next!
Thanks heaps!! 🔥🔥
You're really smart mate, good job. 4j power
Haha ya too kind mate!
Great can’t wait to see you taking it out for a spin 👍👍👍🍻
Been waiting for this vid to come haha finally😂 congrats mate such a clean build.🤙🏻
Thanks Brandon, appreciate it mate!
Congrats Tom, huge milestone.
Cheers Tom!! Bloody stoked!
Bit of a tip for the future, most cars, if the maf is playing up, unplugging it will make the ecu revert to the MAP sensor only. Usually runs perfectly fine. Great way to diagnose a maf issue 👍👍
Fuck yes bro. Been loving watching this come together👌
So good man! We’ll done you’ve done a bloody ripper job
Thanks heaps mate!!
Congrats dude that's awesome!
Nice mate👍
Gday, new sub here, I need to go back and check out more of this build but I like what I’m seeing so far, I like no bs and straight to the point videos, congratulations w the first start mate, sounded strong, cheers
Easy for me to say "been there, done that" but I don't take anything away from your effort or workmanship. You have done a fantastic, good quality job. Qudos to you for being smart enough to make a whiteboard list and follow it! One suggestion I will make in regards to the aux high current 12v feed. Consider having a feed relay that you can use to turn off in a hurry in case of a mishap and maybe an amp meter on your dash so you can keep an eye on aux consumption. Back in the day my HJ60 could only push out 55 amps or something like that so it was good to see what current draw was for aux power supply. Anyway all in all you have done a great job. I hope the patrol brings you a great deal of pleasure.
Go the Patrol! Congrats on the build! 🛻📹🤙😎
Looks awesome sounds awesome, nice job mate
Thanks bro!!
i remember watching your video when your sold your GQ. said you bought this to be more sensible and more family kind of car.
next minute engine swapping it, love it 😂😂😂😂
Can’t wait to see the trailer before it 😊
Excellent work mate, you should be proud of yourself
Thank you! Cheers!
Great stuff. I really like the build. I look forward to future videos. I also have a 4JJ1 in my GU and it goes really well.
That’s good to hear! Can’t wait to drive it!
Just get on with it!!! Ramble, ramble, ramble!!!
Dude so sick seeing your excitement when your done the transmission test thats such a wicked job man youve got me sold 4j the zd world
Wow that's great to see and hear.
💪yyyeeeesssss. Well done mate. Friggin awesome. King fab the lot!! You have put too much work in to go half way. 🤙
Well done Brother, super stoked for ya!.... Go the Patrol!
Been so good watching this build...sounds great!!!
Rippa of a job mate, keep up on all the great work you’re doing 🤌
Thanks bro!!
F$@k yeah how goods that 👍🏽.
Awesome work man I don’t think I could ever do anything like that.
Bloody proud of ya 🤙🏽
Mate well done what a conversation you'll have for anyone considering the same, well done again for the hands on approach
I reckon the ally tube intake looks hot, what would really set it off is if you used duct tape
Sonds so good
Gonna sound so good when she’s driving!!
Your deffs my fav utuber atm I mean macca is pre good but you both have a brain and love that for you both.
awesome job mate, bloody stoked for you. this car is killer
Good job mate! keep it up
Spectacular effort mate. Well done
Top stuff mate, you should be super proud of your work.
Sick!! Congrats!
Yeww cheers mate
Yaaaa. Great work. Must be feeling pretty good? BTW, not one to use a funnel eh?😂
Nice work.
Love the videos dude. Keep it up!
Thanks Levi!!
Awesome stuff mate keep it up
Cheers mick!
Too good 🎉🎉🎉🎉🎉
Nice work mate! Loving the vids even though I know nothing about cars. Keep them coming
Nice, so glad you knew where the keys were.
Mint.
😆😆😆 honestly lost them so many times
Every tool really is a hammer. Ask any sparky. Some don’t own hammers.
Do a hood dump exhaust and get them to fab up custom pipe work for the map sensors.
19:39 almost runs over his dog lol
😆😆
awesome job mate sounds good
Thanks a lot!
Hell yeah she runs great work 😊
came up good brother, stoked for you x
Amazing 👏
OH WHAT A FEELING!! (notayota)
Nice work man
😆😆
Damm boi that turbo noise
How good is it!?
Yay she’s alive good work
Cheers Marty!!
Starter sounds good g 🤣🤙 good shit but
Yehewwwww, nice one mate!
Well done big guy 👏👏👏👏👏
Thanks legend!!
I would probably individually fuse those power cables to that stud because the smaller cables will melt before it pops the fuse
Looks good mate , I think something to strive for in the next video is doing , pulls in maybe an industrials estate some slow idling 4wd videos and obviously a dyno run , not a lot of videos involve motor being worked with proper sound so people can hear and see how it sound inside and out
Everyone wants to see the gear change speed motor running , and some noise , nothing worse then jumping on a video with zero feedback for people who are interested in this motor ,
I’m saying that the videos are great mate keep doing what your doing !
So was only the starter thank god … I met you at the battery place good to see it running bro
Yo!! I was so frizzled when I was chatting to ya! Got home and figured I’ll try slap the starter with a hammer and it worked! Have now bought a new starter! 🤘
That's Soo good man congrats
Thanks mate!!
What a day for an upload
🔥🔥🔥
Sound mint bradaaa🤙🤙🤙🤙
Yooo! Cheers legend!
Awesome stuff man
Appreciate it!
Keen to see what you think of it once it’s on the road
Will be doing a few videos on how I like or dislike the conversion etc
How’s the EGR?….. or exhaust temps 😉
Congrats great job 🎉
Thank you so much 😀
Congrats on the win mate
Thanks mate!!
Did you use the ecu shop control box or not?
LESGOOOO
🔥🔥🔥
Chuck a pod on the end of intake pipe and call it done
😆😆😆
Good job mate
Thanks legend!
look how much room there is in that engine bay
Intake is mint, slap a pod filter on and she’s good to go
Best idea I’ve heard 😆😆
@@RoamLyfe build is coming along mint man bloody good stuff!!
how much hp is it hoping to run?
Sounds like a 4 pot screamer?
Where you gonna slap in airbox or you running pod straight on front of turbo like a mad dawg
Airbox coming in the right side! Should fit mint!
That’s mint bruz well done things a weapon
Sooooo new water pump now or later, or do water pumps like running with no coolant these days 😂
She’ll be fine it’s a steel impeller
@Achille Austin and the seal, this guy Is a pelican some days
Where is the other half of the engine ?
14:40 Is that the aerial going up and down as it's trying to start?
Yes it does that, I gotta unplug it yaha
Fuck yea mate 🤙🏻🤙🏻
When can I drop my one of 🤣🤣
I’ll be accepting more 4j swaps when I’m dead so keep an eye out for that and drop her off then 😆😆😆
Still got the same issue as the ZD, only has 4 pots for 3L and sounds like small displacement 4-banger.
It’ll make more power than a td and a lot safer tho 😀💀
@@RoamLyfe So does a OM606
Om606 is a great option for sure!
First
Cheers Riley!!
at 9:00 what’s the name of the little screen information display?
It comes with the compushift TCM 🤘
@@RoamLyfe ah okay cheers, looks good by the way mate 🤘🏽
I'll go rhythm
Keep the pipe 😉
🥵🥵 roam fab coming in hot
@@RoamLyfe can’t wait to see it making some boost, I definitely need to clean up my bay after watching your series hahaha
What's the oil filter number I need a smaller one for mine can't seem to find one was going to look at a oil filter relocation kit
Got I can’t remember! I just went to bursons and they knew straight away
Thanks mate give them a call. What was the hardest challenge of the conversion?
The ryco z929 is the short filter you are after 🤙
Thanks mate will help me slot with the exhaust when i get it done
Was it a common snail zd30 or a DI?
common
Snail lol
How was that plastic jug $40 at repco? What’s special
Those Indians shore know how to mod 4x4s