Hi, thanks for the video. I got the turboracing kit and the 1:76 drift car. I have a problem, maybe you can help me. I put the machine in bind (it flashes quickly) I turn on the remote control but no binds. The LED on the remote control flashes very quickly at all times. Do you have any suggestion? The remote control's AAA batteries are new. Battery of the car full. Thanks in advance
same issue bro. I have three of them at home and none of them is perfectly even to the ground. Although I tried everything. I mean the cars are pretty cool but building quality is just ass ngl
When i set the throttle switch to 100% it doesnt work, it goes the same speed as 20%, the 50% throttle works fine, but the 20% and 100% both go just as slow as 20%... what can i do? This happened on day 1 after uboxing, i thought it could be the batteries, but then i recharged it and it still the same, can you guys help me?
Hi! This is a drift car, the drift car is equipped with a gyroscope, and the gyroscope has been working while the car is driving, constantly correcting the posture of the car, so it is difficult to go in a straight line. However, after the remote control turns off the gyroscope（SVC）, it can walk a certain straight line, but the drift car can not completely replace the flat sports car, after all, the configuration of the two is different from the wheels of the car.
@@rcnewstone6963 Thanks for the answer, I managed to make the wheel straight by removing the shell and adjusting the wheel. Still not able to drift like in the video. I would like to know if to drift like this I need to put the wheels toe out mod? If so, do you have a tutorial on how?
Try to check rear wheels alignment, mine one side was slightly off, after bending them to almost straight ift fixed the wiggle (but with gyro you will still get some on the highest setting)
I had no problems with my front steering i have a problem where my back wheels one side pushes more power to the right cauing to only want to push the car to a right circle donut and can not drive striaght i can only drive normally 20%power and more and the back right wheels just pauhes the while car how can i have it evenly drive the car again?
Thank you so much for this video I was looking everywhere
You're welcome
Pon kena ejas gayezzzz...tq
Thank you!! 😎
I have this cute rc car ; thanks 😀
Muchas gracias por la información, valiosa para poder disfrutar al máximo estos increíbles vehículos saludos
The fact all the numbers are read in Chinese......its funny bruh
Hi, thanks for the video. I got the turboracing kit and the 1:76 drift car. I have a problem, maybe you can help me. I put the machine in bind (it flashes quickly) I turn on the remote control but no binds. The LED on the remote control flashes very quickly at all times. Do you have any suggestion? The remote control's AAA batteries are new. Battery of the car full. Thanks in advance
I loves this rc car and i have the limited Edison
Thanks
Hello! How can I adjust the gyro without the original remote? I have the P32 version, with the LCD screen.
hi which gyro, throtte, and steering settings is best
I need the best controller settings to drift
I can’t get my c63 to connect to the controller it randomly unconnected and now the car won’t work
what do i do if the two front wheels dont touch the ground when i turn?
I can’t ever get it perfectly
You can watch. C64 Drift RC car restore factory setting and common problem salutions...
From: RC New Stone
same issue bro. I have three of them at home and none of them is perfectly even to the ground. Although I tried everything. I mean the cars are pretty cool but building quality is just ass ngl
When i set the throttle switch to 100% it doesnt work, it goes the same speed as 20%, the 50% throttle works fine, but the 20% and 100% both go just as slow as 20%... what can i do? This happened on day 1 after uboxing, i thought it could be the batteries, but then i recharged it and it still the same, can you guys help me?
Please check the TH-DR was turned to 10 degree.
I just got a green C64 and one of the front wheels won't go straight. What can I do? Should I request a return?
Hi! This is a drift car, the drift car is equipped with a gyroscope, and the gyroscope has been working while the car is driving, constantly correcting the posture of the car, so it is difficult to go in a straight line. However, after the remote control turns off the gyroscope（SVC）, it can walk a certain straight line, but the drift car can not completely replace the flat sports car, after all, the configuration of the two is different from the wheels of the car.
@@rcnewstone6963 Thanks for the answer, I managed to make the wheel straight by removing the shell and adjusting the wheel. Still not able to drift like in the video. I would like to know if to drift like this I need to put the wheels toe out mod? If so, do you have a tutorial on how?
@@marceloneto2084 If you can show me the video, that would be nice. You can contact me by TURBO RACING Facebook page.
IL aurait été intéressant d'avoir accès au sous titrage et traduction plutôt qu'un sous titre anglais de l'anglais ;-)
If I charge with mobile phone adapter type A to C charging ? Will it spoil the toys ?
This car only accept type C charge cable
help me, mine wiggles when going on a straight line
Can you adjust the speed on 20% limited, turn the SVC gyro setting knob to 0, and try the car go straight again.
@@rcnewstone6963 but I need thr SVC to drift ? I think its the gyro is faulty?
@@clarklestercordero1312 It's a drift car, it is normal when it go straight wiggles, the gyro is ON!
Try to check rear wheels alignment, mine one side was slightly off, after bending them to almost straight ift fixed the wiggle (but with gyro you will still get some on the highest setting)
I had no problems with my front steering i have a problem where my back wheels one side pushes more power to the right cauing to only want to push the car to a right circle donut and can not drive striaght i can only drive normally 20%power and more and the back right wheels just pauhes the while car how can i have it evenly drive the car again?
Please send your video to: Lindy@turboracinghobby.com
WTF bro, you copied the video without mention the original source. I will report
We, Turbo Racing are the original, we take this video in our company, thanks for your attention though
@@rcnewstone6963 Thank you for the video! 8-)
@@rcnewstone6963will you make cars with bodies of g-wagon or jeep wrangler.
It would be amazing
Dude they are the original makers, slider boys are dropshippers who say that they Made this car.