Weird, they all seem to have different solder jobs and cables... not one looks like the other with body off.. I was looking at the intestines especially to see if it's easy to swap the battery
@@Gamesnshi The settings vary slightly depending driving surface, but on a nice slick surface, you want the SVC (gyro) anywhere between 55-75%. The throttle and steering settings can stay maxed out if you have enough experience and know how to control each with the right amount of input instead of going full throttle or maxing out the steering wheel every turn. Just note that the lower you have the SVC, the more your car will "oversteer" and potentially spin out during a turn. If that is happening and you're not able to compensate with your throttle and steering, either turn the SVC up slightly or experiment with turning your throttle and steering dial/setting down slightly until you feel comfortable with your driving style and can get smooth drifts. Note: you should never have to have any setting below ~55%
How do you get it to drift so well? I bought one, and it barely ever actually drifts/slides. My settings seem alright, I have a slick surface, I’ve drifted other RC’s, any tips?
the ones with the brass wheels generally are the drift ones, the boxes too when you buy the turbo racing 1/76 has either SPEED or DRIFT printed on the box. The ones with rubber tiers generally doesnt come with a gyro to help the car to drift
The controller in the video had them all 10s, but I've found that you need the gyro around 60% and it also makes it easier if you turn the throttle and steering down a bit too, but that is more personal preference and to make inputs more forgiving
@@dhbroad it really all depends on the surface. if you have a hyper-slick surface then a 10 on the gyro is REQUIRED. (DON'T LISTEN TO THE ELITISTS WHO TELL YOU TO TURN IT OFF COMPLETELY and "git gud") You can achieve such a surface with glide wax for skies or snowboards.
@@drifter1788 Get glider wax for skies or snowboards. polish that stuff on to hard plastic surface (like the mat they sell) in a super-thin layer and be gentle! take the car apart, loosen the front alignment so it moves freely. be careful not to lose the springs, they are about the size of a grain of sand. put the car back together, Set gyro to 10. Mission accomplished.
@@TheBarreraLifeStyle ordered one but seller is lagging on sending it. Supposed to have gotten it 3 days ago but now…. Amazon can’t help cause it’s a 3rd party seller. Oh well I’ll get one eventually.
Where can I find these masts like the one with the bell? Also the ones on the track. Looks so rad with the lights in them and all. Great job!
which is the best among them?
Could you compare the size next to a horwheels plz
Can these be raced against each other, like can 4 people control 1 each simultaneously?
Yes
Tutorial please!
What is the best drift car ?c61 ,c62,c63 or 64 ??????
They are all almost identical and drive very similarly. I believe the c64 is the newest model, but you should be fine no matter what you get
get the one you think looks cooler ;)
Did you put grease on the wheels to make them slide better? Otherwise, i dont know how you got them to drift while still going so slow.
no... He put ski/snowboard glide wax on the surface or the wheels.. or at least thats what i do.
They are very drifty also the video is kinda slowed down
@@cdfgjrvbdjhvjdr2429 Mine are this slow ;)
i have 3
Settings for controller pls
Weird, they all seem to have different solder jobs and cables... not one looks like the other with body off.. I was looking at the intestines especially to see if it's easy to swap the battery
Setting of remote trims are key for drifting well
Do you know the best settings? I just got mine today😂
@@Gamesnshi update pls
@@Gamesnshi The settings vary slightly depending driving surface, but on a nice slick surface, you want the SVC (gyro) anywhere between 55-75%. The throttle and steering settings can stay maxed out if you have enough experience and know how to control each with the right amount of input instead of going full throttle or maxing out the steering wheel every turn. Just note that the lower you have the SVC, the more your car will "oversteer" and potentially spin out during a turn. If that is happening and you're not able to compensate with your throttle and steering, either turn the SVC up slightly or experiment with turning your throttle and steering dial/setting down slightly until you feel comfortable with your driving style and can get smooth drifts. Note: you should never have to have any setting below ~55%
@@luk___4785look at the replies!
No Evo shells..?
you can mod the wheelbase and put a hotwheels one on it
@@rnxyw1194 do you have real experience with putting hotwheels on it? I doubt it's as easy as that...
@@sultanofswingdrift3021 no but someone I know has done it, he says it’s pretty easy with the right tools but im not sure
@@rnxyw1194 the scale is not tha same as hotwheels, these are smaller
@@sultanofswingdrift3021 i know, that’s why you mod the wheelbase 😅 you make it larger or something like that
Where can I find this this exact track ?
How do you get it to drift so well? I bought one, and it barely ever actually drifts/slides. My settings seem alright, I have a slick surface, I’ve drifted other RC’s, any tips?
Maybe the tires are the grippy ones
Because see in the video gold tires are smooth
the ones with the brass wheels generally are the drift ones, the boxes too when you buy the turbo racing 1/76 has either SPEED or DRIFT printed on the box. The ones with rubber tiers generally doesnt come with a gyro to help the car to drift
I need your remote sittings ASAP 😭😭😭
what tunes do you run Like gryo 7/10 ticks
The controller in the video had them all 10s, but I've found that you need the gyro around 60% and it also makes it easier if you turn the throttle and steering down a bit too, but that is more personal preference and to make inputs more forgiving
@@dhbroad it really all depends on the surface. if you have a hyper-slick surface then a 10 on the gyro is REQUIRED. (DON'T LISTEN TO THE ELITISTS WHO TELL YOU TO TURN IT OFF COMPLETELY and "git gud") You can achieve such a surface with glide wax for skies or snowboards.
Is this in slow Motion or these are really slow?
really slow
@@yoyohobbyRChow to drift like this. Please teach me. 🥹
@@drifter1788 git gud
@@drifter1788 Get glider wax for skies or snowboards. polish that stuff on to hard plastic surface (like the mat they sell) in a super-thin layer and be gentle! take the car apart, loosen the front alignment so it moves freely. be careful not to lose the springs, they are about the size of a grain of sand. put the car back together, Set gyro to 10. Mission accomplished.
@@hammerfall6666 thats called projecting.. Go back to your moms basement.
How to drift slow like this? Need mod or what?
I’m getting mine soon and will keep ya updated! 💪🏽
@@TheBarreraLifeStyle i just got my c64. Still cant drift slow like this. How how how?? Please teach me.
@@drifter1788 idk brother mine just came today ! Busy day going to give it a try !
@@TheBarreraLifeStyleHi, have u figure out how to drift that slow?
track surface
@@ilham40
操控的很完美
WOW DO I HAVE THE BEST TRACKS 4 THESE... OOOH YEAH
Wow these can actually drift if you put it on the correct settings. Now I get one. Thanks
Did you get one how is it ??
@@TheBarreraLifeStyle ordered one but seller is lagging on sending it. Supposed to have gotten it 3 days ago but now…. Amazon can’t help cause it’s a 3rd party seller. Oh well I’ll get one eventually.
Yeah how
I just got my speed version and its awesome. Took some tuning.I ordered this today! Comment and I will give updates.
❤