I have a 2008 Rancher, and have used several of your videos to work on my quad. Really appreciate you guys doing these videos, and I have specifically ordered parts from your website instead of Amazon because of them. By the way, any idea when the fuel gauge will be back in stock? I ordered one a year ago and it still hasn't showed up.
I have a 2013 I’ve never changed the pads on since it was new, granted they only recently wore out, survived 8,500 miles, I dread tearing into it, it’s been through a lot of mud and water and I can only imagine the rust. Hopefully your video will help, I appreciate the pace, not too fast, not too slow, and gives all the details one needs to know
Very helpful, I needed to know how to put the springs on the shoes, I watched you do it and went out and put my brakes back together in about 5 minutes, thanks for the tips. P. S. I fought those springs for about 45 minutes then said to myself….I know there’s a better way (a trick), so I came to you and sure enough you put the springs on first then installed the both shoes at the same time, easy as pie.
Excellent video, thanks for all your great vids! Partzilla is my number one place to get Honda atv parts. Now I can do the repairs myself instead of giving my hard earned money to the “stealership”.
Hi well all I can say it a big thank you for you brilliant videos on doing so many jobs on the honda fourtrax. I've followed you and all I can say is outstanding I've changed the oil in the front axle and doing the rear oil change today and done the engine oil and filter your videos are so helpful and clear. I've 2 questions to ask how do I release the rear break plate as mine seems to be stuck I have slackened the cables off but the plate won't move. And I am going to have to replace the key ignition switch as mine is bad is this quite a simple job or am I going to struggle on it . I'm in Wales UK thank you
I managed to move drum about 1/4 inch. Iv sprayed braked cleaner where i could,pentrating oil & my puller arms wont fit in gap yet to pull. Im in that battle u spoke of. Any ideas?
What you showed with the nuts the tightening the 29 pounds and 90 pounds you wouldn’t believe how many people do this project and leave that out thank you working on a 1989 I hope it’s about the same tracks
I need some help! I’ve replaced the brake shoes, all the seals, and both the brake cables and I still can’t get the brake to grab. I’ve even tightened the wing nuts to the max and still nothing. Any advice?
On the back of the brake caliber that it has an adjustment take the nut off take the break arm and you can move it to different positions to get more travel there’s a great video about how to do this online
I changed everything on my rear brakes on my 350 fourtrax, when I press only the handle brake it makes a single click, but doesn’t do it when I apply the pedal. Anyone have this before? Brakes still work fine
Here's a link to the complete parts list. In the video, you'll see on the graphics at the bottom which size is which. The different sizes are listed in the parts list so you can match up what you need. www.partzilla.com/search-list?q=08732-CBCCA%0D%0AACC-RACEG-RE-AS%0D%0A2X9F-MAXIMA-73920-N%0D%0A06430-HN0-A30%0D%0A94201-30450%0D%0A91355-hc4-003%0D%0A91351-hb3-004%0D%0A91256-HP5-601%0D%0A91253-hc4-003%0D%0A07916-958020B%0D%0A07916-958010B
These seals all came seperately. We ordered them anticipating that we'd need to replace them,-- and since we were opeing it up anyway. You can see them here: www.partzilla.com/catalog/honda/atv/2012/trx420fpm-2a-rancher/rear-brake-panel
I love these videos and tutorials, but you guys have GOT to start honoring your 1-3 day delivery. I've had 3 orders in the past 2 weeks where I am buying parts to fix a customer's bike and I paid for 1-3 day shipping. In every case, the parts were delivered between 4-8 days. Not good.
I have a 2008 Rancher, and have used several of your videos to work on my quad. Really appreciate you guys doing these videos, and I have specifically ordered parts from your website instead of Amazon because of them. By the way, any idea when the fuel gauge will be back in stock? I ordered one a year ago and it still hasn't showed up.
I have a 2013 I’ve never changed the pads on since it was new, granted they only recently wore out, survived 8,500 miles, I dread tearing into it, it’s been through a lot of mud and water and I can only imagine the rust. Hopefully your video will help, I appreciate the pace, not too fast, not too slow, and gives all the details one needs to know
Very helpful, I needed to know how to put the springs on the shoes, I watched you do it and went out and put my brakes back together in about 5 minutes, thanks for the tips. P. S. I fought those springs for about 45 minutes then said to myself….I know there’s a better way (a trick), so I came to you and sure enough you put the springs on first then installed the both shoes at the same time, easy as pie.
Great job! Glad the little tip help you get it done!
Those damn pinch bolts are proving tougher than hell for me. Broke two wrenches already. Im about to grind them off
Just subbed, you do an amazing job of clearly outlining the repair process. Thank you.
Thanks for the sub!
Excellent video, thanks for all your great vids! Partzilla is my number one place to get Honda atv parts. Now I can do the repairs myself instead of giving my hard earned money to the “stealership”.
Now i need to see a video about the seal bearing. I grabbed the front on the bearing getting the first seal out.
Same thing happened to me but I finally got it all back together
Hi well all I can say it a big thank you for you brilliant videos on doing so many jobs on the honda fourtrax.
I've followed you and all I can say is outstanding I've changed the oil in the front axle and doing the rear oil change today and done the engine oil and filter your videos are so helpful and clear.
I've 2 questions to ask how do I release the rear break plate as mine seems to be stuck I have slackened the cables off but the plate won't move.
And I am going to have to replace the key ignition switch as mine is bad is this quite a simple job or am I going to struggle on it .
I'm in Wales UK thank you
I miss turning wrenches so much ill do it as a intern right about now
Thank you so much!!! You just saved us Hundreds!!!!!
Do you have any video on a 2016 suzuki ozark 250cc?
Great channel
On left side , there is a short sleeve. Should that move when everything is put together or be tight?
Great video, can’t wait to see the motor rebuild for this unit!!!
I managed to move drum about 1/4 inch. Iv sprayed braked cleaner where i could,pentrating oil & my puller arms wont fit in gap yet to pull. Im in that battle u spoke of. Any ideas?
So which brake pads do i use in the exploded view. the (ASK) one's or the (JB) one's
seen everything on u tube but how the 4 wheel braking system works on a 2010 trx 420 fm?
This video saved me a lot of time and money thanks it’s for the amazing video!!👏🏼💪🏼
Great video gives me the confidence to go give it a go 👍
Tengo un atv 420 y se me queda trabado el freno de pie, como puedo solucionarlo y acabo de cambiar las pastillas?
Would this be the same for a 2007 Rancher 420 4x4
It's the same for all the rancher 420s of this generation.
Hey which brake cable goes where , foot pedal line go at the bottom 500fm trx Honda Forman ??
Yep
Un maestro mi respetos gracias por la clase 🙏🙏🙏
What you showed with the nuts the tightening the 29 pounds and 90 pounds you wouldn’t believe how many people do this project and leave that out thank you working on a 1989 I hope it’s about the same tracks
Why wouldn't you replace the cam seal also?
I need some help! I’ve replaced the brake shoes, all the seals, and both the brake cables and I still can’t get the brake to grab. I’ve even tightened the wing nuts to the max and still nothing. Any advice?
On the back of the brake caliber that it has an adjustment take the nut off take the break arm and you can move it to different positions to get more travel there’s a great video about how to do this online
I changed everything on my rear brakes on my 350 fourtrax, when I press only the handle brake it makes a single click, but doesn’t do it when I apply the pedal. Anyone have this before? Brakes still work fine
Como conseguir el diagrama eléctrico de la trx420
What are the seals called so I can order them you didn't tell us what to order to get them
Here's a link to the complete parts list. In the video, you'll see on the graphics at the bottom which size is which. The different sizes are listed in the parts list so you can match up what you need. www.partzilla.com/search-list?q=08732-CBCCA%0D%0AACC-RACEG-RE-AS%0D%0A2X9F-MAXIMA-73920-N%0D%0A06430-HN0-A30%0D%0A94201-30450%0D%0A91355-hc4-003%0D%0A91351-hb3-004%0D%0A91256-HP5-601%0D%0A91253-hc4-003%0D%0A07916-958020B%0D%0A07916-958010B
Where can I buy this seal kit?
These seals all came seperately. We ordered them anticipating that we'd need to replace them,-- and since we were opeing it up anyway. You can see them here: www.partzilla.com/catalog/honda/atv/2012/trx420fpm-2a-rancher/rear-brake-panel
Muy bueno excelente gracias
Great videos appreciate info.
Me gustaria las instruciones en espanör.
great job
I love these videos and tutorials, but you guys have GOT to start honoring your 1-3 day delivery. I've had 3 orders in the past 2 weeks where I am buying parts to fix a customer's bike and I paid for 1-3 day shipping. In every case, the parts were delivered between 4-8 days. Not good.
Son buenos vídeos pero que malo que sean en inglés no todos entendemos o anulamos el inglés
I own 04 Accord EXV6 Sedan part of Honda Automotive Division so you can go wrong with any Honda product.
I wish we can talk
Im buy A Honda Rubicon
But you made a huge mistake . You used the yamaha grease and it's a honda.
Not even worth fixing honestly a delete is better just use the front brakes
These people only reply to people that want to buy something. LAZY!!!
Seen everything on u tube but how the 4 wheel braking system works on a 2010 honda 420 fm rancher?