Great video Martin! Being tired of my '97 VW tail lights flickering, or intermittently switching off I replaced all taillights connectors with aviation grade, ,gold plated pin sealed circular connectors. Cut the original wires and crimped them to the new connectors; now my VW is "flying"...
Martin, keep these excellent savers coming. I have two Jeep Grand Cherokees and me understand each process & the order things need to be done in. Well done!
Hi Martin . Came across your channel a few weeks ago. My wife has her old 2005 Jeep Grand Cherokee 4.7 v8. I felt like she was on her way out . On to looking at the lifters and rockers when I do the valve covers . Also doing the exhaust manifold gaskets too. Eventually I will be doing the heads and timing . Can’t see my self to bringing it to rest now that I’ve come across all your videos . I have somewhat become addicted . I can now do one project on it and once I get done with one I always find another one on it . I guess thats the Jeep for you. Thanks for your help.
I am sure that the rockers are still in good condition. Just replace the lifters (lash adjusters) and that should do it. Jeeps can be very addictive. Just Expect Every Problem but my favorite is Justify Every Expensive Purchase
NIce guy., but I can't figure out why you even repl'd the connector. In my case I have a burnt terminal and am not looking forward to finding a replacement.
*Thanks Martin !* I'm going to pull a Wire Harness for a PT Cruiser from the Junk Yard (no fun). Parts are hard to come by ... *QUESTION* ; Where can I buy new clips for Chrysler Harness ?
Oh btw...some of the clips, like the fuel pump connector and a few others, there are tabs in the back of the connector....and this next one applies to all vehicles, a lot of your metal electric tabs (the ones that make contact inside the connector) will have a metal pop tab type thing...press it down and it comes out but be extremely careful because they bend and if they bend too far or too many times they will break right off
I cut off my connectors on my truck...since I have aftermarket headlights, I wired everything direct. My head light assemblies split the headlights back into 2 bulbs in the front instead of 1...I like having seperate high beams... But in doing that it allowed me to cut all the connectors off solder the connections and shrink wrap them... And then I put loom over everything and taped it
@@martinbuilt yeah I think all the clips were broken off on mine but I put my aftermarket lights in and had to wire everything anyways...I'll have to send you some pictures of my new lights
Link to Discounted Wheel Warehouse for the KMC XD Series Pulley Wheels www.discountedwheelwarehouse.com/Wheels/details?pt=XD+Series+XD300+Pulley+Satin+Black&make=Dodge&model=Dakota&year=2001&trim=Base+2WD&vid=36813&pid=10171
Just looked into 303 products. I had never heard of them before but will be check them out. Than you for the tip. 303 Automotive, Aerospace Cleaners & Protectant amzn.to/3Oi16EH
You probably should have titled your video how to repin electrical connectors. This doesnt show how to remove or replace the connector. More specifically how to remove them. Im looking for a video on how to remove a electrical connector from my gaspump. And all i can find is fuckin useless bullshit like this titled wrong. No one shows how to remove this shit. Its the only thing keeping ny gas tank in the air. Guess ill bust out the wire cutters
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
Great video Martin! Being tired of my '97 VW tail lights flickering, or intermittently switching off I replaced all taillights connectors with aviation grade, ,gold plated pin sealed circular connectors. Cut the original wires and crimped them to the new connectors; now my VW is "flying"...
Martin, keep these excellent savers coming. I have two Jeep Grand Cherokees and me understand each process & the order things need to be done in. Well done!
Nice job Martin.Those head lights look good.👍👍👊
Thank you Dan, I'll be doing a video on the headlights should be out next week.
Hi Martin . Came across your channel a few weeks ago. My wife has her old 2005 Jeep Grand Cherokee 4.7 v8. I felt like she was on her way out . On to looking at the lifters and rockers when I do the valve covers . Also doing the exhaust manifold gaskets too. Eventually I will be doing the heads and timing . Can’t see my self to bringing it to rest now that I’ve come across all your videos . I have somewhat become addicted . I can now do one project on it and once I get done with one I always find another one on it . I guess thats the Jeep for you. Thanks for your help.
I am sure that the rockers are still in good condition. Just replace the lifters (lash adjusters) and that should do it. Jeeps can be very addictive.
Just
Expect
Every
Problem
but my favorite is
Justify
Every
Expensive
Purchase
@@martinbuilt Yes sir 🙂thanks again
Hi Martin, nice video. Very neat and precise as always!!! Take care. Stay safe.
Thank you, I'm glad you liked it. You stay safe as well.
Nicely done Martin 👍😁
Thank you Dave.😎👍
NIce guy., but I can't figure out why you even repl'd the connector. In my case I have a burnt terminal and am not looking forward to finding a replacement.
*Thanks Martin !*
I'm going to pull a Wire Harness for a PT Cruiser from the Junk Yard (no fun). Parts are hard to come by ... *QUESTION* ; Where can I buy new clips for Chrysler Harness ?
That's cool. I had no idea i could do that. I've always cut the wires. in the future i'll see if i can't do this method.
Thanks Martin life saving need to knows sir very much appreciated
Thanks for another great show. I know if I ever do this I will have blood somewhere as a result of a screwdriver penetration. Thanks again.
Thank you, I'm glad you liked it and found it helpful. Be careful.
@Montréal 🇨🇦...merci beaucoup, Martin 😇
You are welcome. I'm glad you liked it. 😎
Oh btw...some of the clips, like the fuel pump connector and a few others, there are tabs in the back of the connector....and this next one applies to all vehicles, a lot of your metal electric tabs (the ones that make contact inside the connector) will have a metal pop tab type thing...press it down and it comes out but be extremely careful because they bend and if they bend too far or too many times they will break right off
Can you recommend a 3.7 engine rebuild manual with bearing and ring clearance, torque specifications. Love the channel thanks
Thanks for the video. Do you have a link to the light assembly and bulbs that you have and what do you think of them?
I will have the video out next Saturday. I'm very happy with them. HEADLIGHTSDEPOT Black Housing Halogen Headlights amzn.to/3jKmCE3
@@martinbuilt Thanks Martin. I'm looking forward to the video.
Thanks for the video. Can you add a link to the tool you used with the many options?
These are the tools I used to remove the terminals.
Terminal Removal Toolkit amzn.to/37Fo9bw
I cut off my connectors on my truck...since I have aftermarket headlights, I wired everything direct. My head light assemblies split the headlights back into 2 bulbs in the front instead of 1...I like having seperate high beams... But in doing that it allowed me to cut all the connectors off solder the connections and shrink wrap them... And then I put loom over everything and taped it
I have done the similar method especially if the wire is damaged.
@@martinbuilt yeah I think all the clips were broken off on mine but I put my aftermarket lights in and had to wire everything anyways...I'll have to send you some pictures of my new lights
Great One ☝️
Thank you 😊
The black wheels. Where can I get thoes? Thanks.
Link to Discounted Wheel Warehouse for the KMC XD Series Pulley Wheels
www.discountedwheelwarehouse.com/Wheels/details?pt=XD+Series+XD300+Pulley+Satin+Black&make=Dodge&model=Dakota&year=2001&trim=Base+2WD&vid=36813&pid=10171
@@martinbuilt thanks a bunch. You're the man! Keep up the great work.
@@edwardsjohnson5387 Thank you, I really appreciate that.😎👍
soak that all down with some 303 and your all good!
Just looked into 303 products. I had never heard of them before but will be check them out. Than you for the tip.
303 Automotive, Aerospace Cleaners & Protectant amzn.to/3Oi16EH
👍
Flimsy tools for flimsy clips! The link in description
You probably should have titled your video how to repin electrical connectors. This doesnt show how to remove or replace the connector. More specifically how to remove them. Im looking for a video on how to remove a electrical connector from my gaspump. And all i can find is fuckin useless bullshit like this titled wrong. No one shows how to remove this shit. Its the only thing keeping ny gas tank in the air. Guess ill bust out the wire cutters