DIY - How to make Micro Linear Actuator for Toy at home
ฝัง
- เผยแพร่เมื่อ 25 ก.พ. 2021
- I made a micro linear actuator(stroke 30mm) using bolt, insert nut, pipe and 3d printer etc at home.
Let's see together~~~!
Let's to subscribe(please! click) → th-cam.com/users/원스토이WonsToy...
Thank you for watching.
Please! Subscribe, Like, Comment, Share our channel and set notification. - บันเทิง
I have watched many videos but finally this one has made it easier. Thank you
great design. Slightly improving (but complicating the design) is to make a toge and groove between the housing and the protruding pipe. That removes the need to anchor the device
thank you for you advice.
@툴스토이 TOOLSTOY can you get STL?
3D프린터 인쇄품 쓰시는군요! 멋지십니다!!!
저가 3D 프린터 사용하고 있어요. 좋게봐주셔서 감사합니다.
where did you get the knurled insert nut?
멋지십니다.
항상 응원하고 자주 놀러올게요.^^
부족한 영상 좋게 봐주셔서 감사합니다. ^^
@@toolxtoy 제가 볼때는 대단 하십니다.
항상 응원하겠습니다.^^
how did you drill the no head bolt so that it was centered? I've never been able to do it successfully and I was wondering if there was a tool or jig I needed.
I drilled at center of hexagon socket of standard no head bolt by drilling machine after vertical fixing it using vice.
Nice idae
Good luck
Thank you for watching my idea video~~
가지고 싶다 ~~
전문가시네요 ㅎㅎ 이제 3d 파츠에서 메탈로 넘어오셨군요 축하드립니다 ㅋ
엑추에이터가 비싸서요~ㅋ 실력이 부족하지만 그냥 만들어 사용하려고요. 작업 영역을 확장해볼까 생각중이에요~~~ㅎ
What stops the pipe from coming completely out as there is no a stop point designed to stop it! Nice design .
This actuator don't has stopper for simple design. Need to turn operating voltage off to stop.
@@toolxtoy okay thank you
great, that's exactly what i need, can you get STL?
if let me know your email address, i will send stl file to you.
영상 잘보고있습니다~! 26초쯤에 드릴링 하는건 챔퍼 만들어줘서 들어가게 쉽기 하려고 하시는건가요? 그리구 혹시 30초 쯤부터 인서트너트 넣으실때 인서트너트 끝에 나사산이 있는데 노헤드 볼트 넣어놓고 인서트너트 박으신건가요? 그냥 인서트너트로만 하면 부러져서 그렇게 하신건가요? 질문이 길어서 죄송합니다 ㅠㅠ
네. 맞습니다. 추가설명드리자면 드릴링은 파이프 커팅기로 자르니깐 커팅면 내측으로 늘어나며 홀이 작아져서 인서트너트가 안들어가서 넓히려고 드릴링 한거구요. 노헤드 볼트는 인서트너트를 그냥치면 너트표면이 일그러지고 안들어갈까봐 넣어놓고 박은거예요~~~도움이 되셨으면 좋겠네요.
@@toolxtoy 넵 많은 도움이 되었습니다 감사합니다! 혹시 노헤드 볼트는 어디서 구매하셨는지 알 수 있을까요? 그리고 노헤드볼트의 구멍크기도 종류별로 구비가 되어있는 편인가요..?
@@ccen3103 노헤드볼트는 가까은 공구상가 볼트가게에서 구입하였고 노헤드 볼트 구멍 홀경은 모터 샤프트를 삽입하고 수평으로 고정이 되야 하기때운에 샤프트직경과 같게 (3mm) 제가 별도로 직접 탁상 드릴로 반듯하게 뚫었습니다.
Where can you download 3d files?
Hello, is it possible to share stl file ???
안녕하세요! 혹시 stl 파일을 받을 수 있을까요,,?ㅠㅠ 내일까지 과제로 만들어야하는데 늦어버려서... ㅠㅠ감사해요... 구독 좋아요 알림설정 완료 했습니다 하ㅏㅎ
안녕하세요. 메일 주소 알려주시면 송부드리도록하겠습니다.
cool cool ideia my
전기구동실린더인가요?
네. 전기 6v 인가하면 모터가 회전하는 실린더입니다.
👏👏 top
Thank you for watching my video~
Sangat membatu sekali Vidio yang berguna
Very nice
Thank you for watching.
~
OMG! this exactly what im looking for do you have a CAD Step File
Gteat work, you can share stl file please
Hi Can you share the CADmodel with me?
let me know your email address. so then i will send print file(stl).
Good but slowly
Thank you for watching. I konw that problem too. It can be improved by applied higher speed rgeared motor than current motor.
Would you share your 3d printable file?
Sure. Let me know your email address. I will send 3d printable file
@@toolxtoy thank you!! This is so neat it can be used in so many different ways! zsimpleman@yahoo.com is my email. Have you thought about putting your files on www.thingiverse.com/
@@toolxtoy could I also get your 3D files for this and your huina 583 quick change and the log grapple? My email is jasonpackard@gmail.com
Great work. I really want to duplicate these for my front loader.
Thanks
Thanks
@@wakeCTR Hi bro~ I sent 3d printer files to your email address.
Hi how are you I need 6 of this type. do you do to sell? thanks
Thank you for watching. This actuator was personally made at home. so I can't sell it.But you can buy actuator like it at aliexpress.com by typing text "12v mini linear actuator".
@@toolxtoy can you get STL?
@@janimarnogueira8700 let me know your email address.
👍🏾😃
@@toolxtoy I write my email and it doesn't appear here
Hello, I'd like to have your stl file. I subscribed. I would appreciate it if you could reply quickly. THANK YOU .
안녕하세요. 메일 주소 알려주시면 송부드리겠습니다.
Где бы ещё найти инструкцию как из подручных материалов сделать редуктор...
I didn't make gear box. I bought DC motor with gear box at aliexpress.com
장난감이라고 보다..그게 알리에서 3~4만원대 팔리고 한국에서 6~7만원에 팔림.
Очень медленно