HUINA 1570 EXCAVATOR UPGRADE TO STRONG SERVO ARM
ฝัง
- เผยแพร่เมื่อ 20 ก.พ. 2020
- Main Arm, Second Arm and Bucket Arm of HUINA 1570 EXCAVATOR were upgraded to Driving Rod With Servo for strong operating power
Let's to upgrade~~~!
Let's to subscribe(plz. click) → th-cam.com/users/원스토이WonsToy...
---------------------------------------------
Main Parts for upgrade
---------------------------------------------
- Main Arm Second Arm Bucket Arm Driving Rod With Servo(3 EA)
store to purchase : aliexpress(www.aliexpress.com)
Thank you for watching.
Please! Subscribe, Like, Comment, Share our channel and set notification. - บันเทิง
Great video! I have a converted Huina that run on a system like this. In a month, or 2 I'll have video of it hard at work at one of our clubs gatherings. Although still not able to work as hard as the hydraulic versions, it at least can lift a bucket of dirt now!
Thank you for watching ~
like video 👍👍👍
Mantap bang
where is stoppers ?
Wow, good job Rc excavator 👏👍
정보 감사 진정한 금손입니다. 구독과 추천 박습니다.
시청과 좋은 말씀 감사합니다.
Caramba, estou impressionado 😱😱😱👏👏👏👏 parabéns 👍.
Yang Indonesia like'
업그레이드 영상은 처음 봅니다... 많이 배웠습니다 영상 좋아요!!
시청해주셔서 감사합니다~~~
This main arm electronic board is not used. after installing the servos?
💪👏👏👏
More video brother.....
U should install Weight in the engine room. real excavator has very heavy engine room for balance
Thanky for your good advice~
Good job 👍😊👍
Very nice
I like your video ❤❤🎉
1550 개조 교과서 같습니다 굿굿납땜하시고 전기테이프보단 수축튜브 쓰세요 강추입니다^^
감사합니다~~~ 1570은 580 산후로는 파워도 약하고 해서 거의 가지고 놀지 않았는데 갑자기 생각이나서 잘못하지만 힘들게 개조했네요. 수축튜브가 어디있나 못찾겠더라구요 ㅜㅜ 라이터하고 많이 사놔야겠어요~~^^
@@toolxtoy 네이버에 수축튜브 검색하시면 많이있거든요 짤라서쓰는걸로 사세요 ^^ 저는 3미리전후쓰는거깃같아요^^
@@rckoreateam6315 감사합니다. 검색해볼께요~~~
Do you know the voltage of these actuators?
LOOK OUT! That Dremel blade can remove a finger! Use a vice. Maybe the same procedure for the 550 and the 1592?
Thank you for your worries. I will use a vice. I think 550 or 1592 excavator needs a same procedure too.
@@toolxtoy WAY too many injuries to count!
@@toolxtoy My 1592 id TOO weak to dig! Need upgrades.
@@ddd228 I think All work is possible with a nipper instead of Dremel blade for safety.
If you would add pulling springs right next to the servos, wouldn't it carry almost twice the weight?
Since the way don't it is allways helped by it's own weight?
Thank you for watching and your good advice.
That is an unusual modification! Please explain that.
verygood
Thank you for watching.
Show de bola parabéns pelo trabalho você faz atuador de escavadeira huinna 1550 ou conhece alguém que possa fazer??? Obrigado
you can buy actuators at aliexpress.com.
@@toolxtoy ok obrigado pela atenção
Alguém tem o link desses atuadores,já procurei e não achei, obrigado
will this work on the top race version?
Thank you for watching. I didn't buy top race version but I think it wll work on the top race version because of very similar structure and size.
bang lu beli arm Serfo nya di mana
did you install a limit switch?
No. I didn't install a limit switch. Thank you
will this work on a Huina 1592
Thank you for watching~. I think this work can apply on 1550 or 1592 too.
Các bạn chơi huina1550 thì ko nên ..hãy cô găn mua huina 1593 ..các bạn được chơi tron vẹn và vui như may suc thật..tôi khuyên chân thành
잘 만들었어요 ~추천 꾸욱 그러나 아직 구매 안하신분들은 그냥 593을 사세요 ㅠㅠ 업글 비용에 592면 593이 더 싸게 먹혀요 ㅠㅠ
네. 맞는 말씀이세요~~~ 업그레이드하는거 쉽지 않아요~~~
will this work on a huina 1552
I think this work will be possible on huina 1550 1592. I don't know 1552 version. 1552 right?
질문하나 드려도 될까요?? 후이나 1580정도면 혼자놀기 좋나요??힘이 약할까봐 걱정이네요 ㅠㅠ가격은 그래도 꽤 되던데
가격이 다소 높죠. 유압방식은 아니지만 스크류 방식이라 장난감치고는 힘도 어느정도 있고 혼자가지고 놀기는 괜찮을거 같은데 가격이 싸진않으니 잘결정하세요.
Buenos días donde puedo conseguir esos motores y como se llaman
Thank you for watching. maybe It calls "Main Arm Second Arm Bucket Arm Driving Rod With Servo" and I think you can find It at www.aliexpress.com
저기혹시이거선이짧아서요 그거어떻게해야되요?
전선이 짧으면 유사한 전선 구하거나 또는 네이버 같은데서 구매한 후 잘라서 납땜 등으로 연장해줘야 될것 같아요.
한가지 질문합니다. 10분 13초쯤에나오는 무게추는 뭐라고 검색해야할까요??
Naver에서 휠발란스납 또는 붙이는납 이라고 검색하시면 나올거예요~~
고맙습니다. 정말 빠르시네요!!
How much was it I can’t find it it only take me to the site not the item I don’t want to buy the wrong one
Thank you for watching. You can find "3 Pcs DIY Upgrade Metal Arm Driving Servo Parts For HUINA 1550 RC Crawler Car 15CH 2.4G 1:14 RC Metal Excavator Metal Arm Part" at aliexpress.com. I guess it was about 31 USD. good luck. friend~~
How much does a servo cost
Thank you for watching.maybe It is about 32 USD at aliexpress.com or 44 USD at ebay.com~~
It cost will cost around 50 to 60 bucks
혹시 파실 생각은 없으세요?
(고냥 한번 물어 보았어요 죄송합니다)
죄송해요~제가 가지고 놀려고 그냥 허접하게 변경한거라 ㅎㅎ, 관심과 시청해주셔 감사합니다. 앞으로도 종종 놀러오세요~^^
Dope will you do mine? How much?
Thank you for watching. I'm Sorry. It's my hobby work~.
@@toolxtoy I know just wish i could do this lol awesome upgrade