This was really interesting! Bryson is so crafty- i would love to see more of his projects as he inspires me to recycle often and be more hands on with projects 😁
Honestly, what is supposed to be your end game here? Adding oxygen to water? H2O+O=H2O2 which is hydrogen peroxide + all the heavy contaminants you are dragging along with the explosive mixture that you have put into one of the most feared fragmentation devices ever (glass,see German glass mine).
Brice , I've seen a similar system on an old Ford Pickup. It boosted the mileage and power of the vehicle. Baking soda.and stainless steel light switch covers and plastic spacers in between .. stainless screws and nuts to secure them together. Placed in a sealed pvc capped container , and piped thru a vacuum line into the carb intake.. read up on it.
Yes he did. Mater of fact, he had 2 netural plates between the anode and cathode. While he didn't indicate which was the anode and the cathode. If we some the two outside are anodes then the plate arrangement would have been like this. + n n - n n + . Otherwise if the outside plates were cathode then the plates would have been - n n + n n -
Hey there curious, I was trying to listen to the video although I got a bit lost on some things Moreover where you got the pump, and how you electrify the steel sheets. You mind giving me a list of stuff to buy/ how to do the more electronics part?
he used a fish pump but you really don't need one and it's actually counter productive as it can push out hydrogen made by your generator. Google "molecular hydrogen nih gov". You'll find many scientific research papers on molecular hydrogen's antioxidant and anti inflamitory porperties. Hydrogen and oxygen are being produced by electrolisys, and this generates pressure inside the HHO generator so no need for a pump. Chemistry and physics class. At standard pressure and pressure, 1 mol of water (18 grams) is converted to 1 mole of hydrogen gas (2 grams) and 0.5 moles of oxygen (16 grams) in total you have 1.5 moles of gases, and at standard temperature and pressure 1 mole of gas any occupies 22.4 liters. So electrolizing just 12 grams of water (0.66 mols or 12 cubic centimeters) creates 1 mole of HHO gas that expands to 22.2 liters at sea level air pressure(1 atmosphere) and 0°c with that amount of expansion, you don't need a pump. Nor did he indicate what he used for a power supply. But I strongly suspect it was a battery charger supplying maybe 13.6 to 14.4volts. Since he had 2 neutral plates between anode and cathode, that divides the voltage between 3 cells. That means 13.6 volts /3= 4.4 volts per cell which is really too high and he is producing too much HHO. You will be better off of you use a 5v 3 amp power supply and used only one neutral plate between anode and cathode, which divides the setup into two cells at 5v/2=2.5v per cell. Your production rate will be less but your plates will last much longer and you'll be producing at just a little less than double his efficency. Use potasium hydroxide (KOH) at a 6 mole per liter of water concentration a mole of KOH is 56.11 grams so × that by 6 then added to 1 liter of distilled water. Then mark the water level on the jar. Then as you electrolize the water it gets more concentrated. Just add distilled water back. Keep a lid on the jar to prevent atmospheric Carbon dioxide from turning the Potasium hydroxide to potasium carbonate. Lastly, add a bubbler after the hho generator to scrub any fine mist that may contain KOH which is very caustic. It also will scrub any chromium ions that leach out into the electrolyte and could mist over. Don't want cancer causing chromium ions from the stainless steel in your drinking water.
If your trying to saturate the water with hydrogen and oxygen gases quickly and efficently, look into micro bubble generation. TH-cam has a few videos on it. Search Micro bubbles or nano bubbles. Here is the basic or simple concept. 1) Place an airstone inside a slightly bigger tube under water 2) Pump water through the that tube. Simple, yes? How it works is when you pump water through the bigger tube, it forces water to go around the airstone. The water has to moves faster as it passes the airstone resticting the flow, and this creates a venturie effect with low pressure around the airstone pulling gases from the gas tube into the airstone and into the water flowing over the airstone. And, with the fast moving water flowing over the stone, the bubbles are ripped off into very tiny bubbles. But remember, in the fast moving stream over the stone is still a low pressure zone. After getting past the airstone the water slows down and pressure returns to normal and the bubbles shrink more turning into very tiny tiny bubbles. These very tinny tiny bubbles stay in water longer, and have a very high surface to volume ratio to enable much faster gas adsorption so as to more quickly saturate it. In the depths of a lake, it takes even more water pumping water through the tube to generate a larger venturii effect so as to pull air down furthe. Because of the higher water pressure and greater venturii effect this creates an even greater prrssure difference before and after the airstone such that the bubbles shrink even more, so much more that they get more pushed around by brownian motion and wont float to the surface. Instead, they completly disolve into the water. These are nano bubbles. Making micro bubbles will work better if you cut way back on your HHO production rate. Cutting back on your HHO production rate has two great side benifits. 1st is your plates will last much longer. And if you cut back on your production by using less voltage, yes less current flows but it ends up producing HHO far more more efficently and generates less heat. And the third benifit is less HHO gass is produced and vented making less of a potential safety hazard. The first 1.24v × each amp = watts stored chemically in hydrogen. Each volt over 1.24v pushes ions or current through the electrolyte, and this is what causes heat. So for efficency it may be desirable to minimize the over voltage. potasium hydoxide (KOH) is best for stainless steel plate electrolisys. If you google KOH conductivity graph, youll find that 6 mole of KOH per liter of distilled water has roughly the highest conductivity concentration which allows you to lower the voltage applied to the cells substantually. Lastly, because KOH is caustic you probably would lkke to include a seperate bubbler after your HHO generator to scrub any fine KOH and water mist made from bubbles popping in your HHO generator. Pre bubbler scrubbing also helps keep any chromium ions in the mist out of your drinkingnwater. Don't want cancer causing agents in your water right? You can probably do fine with a 5v 3 amp power supply to two electrods seperated by a neutral plate. The neutral plate effectivly divides the one cell into two which means 2.5v per cell. And lastly stay below 1 amp per square inch. 0.5v amps per square inch is more desirable for longevity of the plates.
I was once told using zinc plates might be safer than stainless steel. Stainless contains chromium and that’s not good for anyone. And you can probably diffuse more gas into your water using an aquarium bubbler. Just a thought. Loved the video.
I HAVE ONE QUESTION: HOW MANY PROJECTS DOES EACH PERSON HAVE GOING AT ONE TIME ? IT SEEMS TO ME YOU GUYS HAVE A BUNCH OF STUFF GOING ON ALL THE TIME AND I THINK THAT'S THAT'S WONDERFUL.
Brock Ary We like to go one at a time but sometimes we have an interest or need the pops up. We usually each have one big project going then veer off at times for small projects. Once done, we get back to the big one!
@@mylittlehomestead, I COME FROM A FAMILY OF 5 BOYS AND I'M THE YOUNGEST AND WE KIND OF GREW UP LIKE YOU GUYS ARE. WE LIVED 10 MILES FROM TOWN AND OUR LIVES WERE PRETTY MUCH NORMAL ORGANIZED CHAOS BUT WE ALL HAD THINGS TO DO AND WE WERE NEVER BORED. LOL
This doesn't seem safe... Or usefull either >< I'm not an english speaker and Don't get the point here... What does this machine do exactly ? Why would you add gas to your water ?
@@mylittlehomestead thank u,i thought he is a cousin...btw i just came accross ur channel, and i love all ur videos..i watched it on my days off..like right now..u r all thats playing in youtube for me..i love ur family..i am a mom with 4 kids too 2 girls 2 boys..and we bought a 20 acre in az,we r starting to develop as vacation place.
This was really interesting! Bryson is so crafty- i would love to see more of his projects as he inspires me to recycle often and be more hands on with projects 😁
wow your family just gets in and has a go at things good for you all👍
that's interesting, I am going to have to watch this video again
One day, I'm half expecting Bryson, to walk out of the shed post explosion with his hair and face blown back and singed a la cartoon.
You need to take care with this!
You seem to be splitting water into Hydrogen and Oxygen mixed together. This is called Browns Gas and is explosive!
Honestly, what is supposed to be your end game here? Adding oxygen to water? H2O+O=H2O2 which is hydrogen peroxide + all the heavy contaminants you are dragging along with the explosive mixture that you have put into one of the most feared fragmentation devices ever (glass,see German glass mine).
Love, Love, Love!
Brice , I've seen a similar system on an old Ford Pickup. It boosted the mileage and power of the vehicle. Baking soda.and stainless steel light switch covers and plastic spacers in between .. stainless screws and nuts to secure them together. Placed in a sealed pvc capped container , and piped thru a vacuum line into the carb intake.. read up on it.
www.popularmechanics.com/cars/a3983/4310717/
What did you used as electrolyzer , Potassium Hydroxide or Sodium Hydroxide???
You should have neutral plates between the + and -.
Yes he did. Mater of fact, he had 2 netural plates between the anode and cathode. While he didn't indicate which was the anode and the cathode. If we some the two outside are anodes then the plate arrangement would have been like this. + n n - n n + . Otherwise if the outside plates were cathode then the plates would have been - n n + n n -
That looks like a good, easy set-up. What is your power supply?
Hey there curious, I was trying to listen to the video although I got a bit lost on some things Moreover where you got the pump, and how you electrify the steel sheets. You mind giving me a list of stuff to buy/ how to do the more electronics part?
he used a fish pump but you really don't need one and it's actually counter productive as it can push out hydrogen made by your generator. Google "molecular hydrogen nih gov". You'll find many scientific research papers on molecular hydrogen's antioxidant and anti inflamitory porperties. Hydrogen and oxygen are being produced by electrolisys, and this generates pressure inside the HHO generator so no need for a pump.
Chemistry and physics class. At standard pressure and pressure, 1 mol of water (18 grams) is converted to 1 mole of hydrogen gas (2 grams) and 0.5 moles of oxygen (16 grams) in total you have 1.5 moles of gases, and at standard temperature and pressure 1 mole of gas any occupies 22.4 liters. So electrolizing just 12 grams of water (0.66 mols or 12 cubic centimeters) creates 1 mole of HHO gas that expands to 22.2 liters at sea level air pressure(1 atmosphere) and 0°c with that amount of expansion, you don't need a pump.
Nor did he indicate what he used for a power supply. But I strongly suspect it was a battery charger supplying maybe 13.6 to 14.4volts.
Since he had 2 neutral plates between anode and cathode, that divides the voltage between 3 cells. That means 13.6 volts /3= 4.4 volts per cell which is really too high and he is producing too much HHO. You will be better off of you use a 5v 3 amp power supply and used only one neutral plate between anode and cathode, which divides the setup into two cells at 5v/2=2.5v per cell. Your production rate will be less but your plates will last much longer and you'll be producing at just a little less than double his efficency.
Use potasium hydroxide (KOH) at a 6 mole per liter of water concentration a mole of KOH is 56.11 grams so × that by 6 then added to 1 liter of distilled water. Then mark the water level on the jar. Then as you electrolize the water it gets more concentrated. Just add distilled water back.
Keep a lid on the jar to prevent atmospheric Carbon dioxide from turning the Potasium hydroxide to potasium carbonate. Lastly, add a bubbler after the hho generator to scrub any fine mist that may contain KOH which is very caustic. It also will scrub any chromium ions that leach out into the electrolyte and could mist over. Don't want cancer causing chromium ions from the stainless steel in your drinking water.
If your trying to saturate the water with hydrogen and oxygen gases quickly and efficently, look into micro bubble generation. TH-cam has a few videos on it. Search Micro bubbles or nano bubbles.
Here is the basic or simple concept.
1) Place an airstone inside a slightly bigger tube under water 2) Pump water through the that tube. Simple, yes?
How it works is when you pump water through the bigger tube, it forces water to go around the airstone. The water has to moves faster as it passes the airstone resticting the flow, and this creates a venturie effect with low pressure around the airstone pulling gases from the gas tube into the airstone and into the water flowing over the airstone. And, with the fast moving water flowing over the stone, the bubbles are ripped off into very tiny bubbles. But remember, in the fast moving stream over the stone is still a low pressure zone. After getting past the airstone the water slows down and pressure returns to normal and the bubbles shrink more turning into very tiny tiny bubbles. These very tinny tiny bubbles stay in water longer, and have a very high surface to volume ratio to enable much faster gas adsorption so as to more quickly saturate it.
In the depths of a lake, it takes even more water pumping water through the tube to generate a larger venturii effect so as to pull air down furthe. Because of the higher water pressure and greater venturii effect this creates an even greater prrssure difference before and after the airstone such that the bubbles shrink even more, so much more that they get more pushed around by brownian motion and wont float to the surface. Instead, they completly disolve into the water. These are nano bubbles.
Making micro bubbles will work better if you cut way back on your HHO production rate. Cutting back on your HHO production rate has two great side benifits. 1st is your plates will last much longer. And if you cut back on your production by using less voltage, yes less current flows but it ends up producing HHO far more more efficently and generates less heat. And the third benifit is less HHO gass is produced and vented making less of a potential safety hazard.
The first 1.24v × each amp = watts stored chemically in hydrogen. Each volt over 1.24v pushes ions or current through the electrolyte, and this is what causes heat. So for efficency it may be desirable to minimize the over voltage.
potasium hydoxide (KOH) is best for stainless steel plate electrolisys. If you google KOH conductivity graph, youll find that 6 mole of KOH per liter of distilled water has roughly the highest conductivity concentration which allows you to lower the voltage applied to the cells substantually.
Lastly, because KOH is caustic you probably would lkke to include a seperate bubbler after your HHO generator to scrub any fine KOH and water mist made from bubbles popping in your HHO generator. Pre bubbler scrubbing also helps keep any chromium ions in the mist out of your drinkingnwater. Don't want cancer causing agents in your water right?
You can probably do fine with a 5v 3 amp power supply to two electrods seperated by a neutral plate. The neutral plate effectivly divides the one cell into two which means 2.5v per cell. And lastly stay below 1 amp per square inch. 0.5v amps per square inch is more desirable for longevity of the plates.
I remember making things from the scrap pile when I was a kid. Only forgot to ask permission once.....
Bryson is a regular everyday genius!
I'm new and love the videos ✊🏼👍🏼🤘🏼💚🌈🐶
You have kind of rushed through to the end, why are there 3 electrodes? You need more details and what voltage and amp you are running?
Awesome sauce 🖤
You guys planning on making something with them cans
their for the foundry or other projects.
silicone tubes and super glue in in the fridge to store Will last longer
So where does the hydrogen go? Isn't it flammable?
hi like what you dun a going to so keep up with the good work
Have you run it in one of your cars yet?
yes. the 200 dodge 1500 ram. it helped significantly.
Bryson is really smart. It's good that he can fix Electronics. Not too many people are that good with Electronic.
Are you using tap water or well?
It's better if you use potasium hydroxide. It's also good to use a bubbler to scrub any mist from the HHO generator.
In awe...❤️☕😎
HHO is also better known as Brown's Gas
You could put some of that gas into the fish growing tank.
get empty mason jars that would be a series of flirtations to make it safer to drink.
My cats have just gave me a newborn baby possum what do I do with this baby.
Maggie Vedrenne take it to wildlife rescue they are set up for that kinda stuff.
Wow no ones laughing now! I love your channel and thank you for the teaching!! God Bless! 🙏😊
how do you know how to do that?
kim johnston There’s lots online about it! :)
Can you make your videos longer please?
Never heard of an HHO Generator before. By the thumbnail, I thought y'all were making a Water Distiller.
It s working good... i save 40%$$ gaz and almost 0 co2 out... using
Dry .. cell the America Downto earth
I have junk pile envy. LOL
Food grade hydrogen peroxide is $10 and you add 5-6 drops per gallon to oxygenate. Next time when it's dirty, try this.
I was once told using zinc plates might be safer than stainless steel. Stainless contains chromium and that’s not good for anyone. And you can probably diffuse more gas into your water using an aquarium bubbler. Just a thought. Loved the video.
I HAVE ONE QUESTION: HOW MANY PROJECTS DOES EACH PERSON HAVE GOING AT ONE TIME ? IT SEEMS TO ME YOU GUYS HAVE A BUNCH OF STUFF GOING ON ALL THE TIME AND I THINK THAT'S THAT'S WONDERFUL.
Brock Ary We like to go one at a time but sometimes we have an interest or need the pops up. We usually each have one big project going then veer off at times for small projects. Once done, we get back to the big one!
@@mylittlehomestead, I COME FROM A FAMILY OF 5 BOYS AND I'M THE YOUNGEST AND WE KIND OF GREW UP LIKE YOU GUYS ARE. WE LIVED 10 MILES FROM TOWN AND OUR LIVES WERE PRETTY MUCH NORMAL ORGANIZED CHAOS BUT WE ALL HAD THINGS TO DO AND WE WERE NEVER BORED. LOL
Got Stuff......Will Build. Now that's recycling.
😯👍👍👍👌
This doesn't seem safe... Or usefull either >< I'm not an english speaker and Don't get the point here... What does this machine do exactly ? Why would you add gas to your water ?
Take a look at www.bssa.org.uk/topics.php?article=112 there is a difference between chromium 6 and chromium 3.
Who is ben?is he a relative?
D kuhlmom Ben is a family friend :)
@@mylittlehomestead thank u,i thought he is a cousin...btw i just came accross ur channel, and i love all ur videos..i watched it on my days off..like right now..u r all thats playing in youtube for me..i love ur family..i am a mom with 4 kids too 2 girls 2 boys..and we bought a 20 acre in az,we r starting to develop as vacation place.
D kuhlmom Thank you so much for your support! That sounds like an awesome project. Good luck to you & your family!🌻
Does it prevent the Kung flu?
Any chance you guys wanna adopt me? ❤️
Why are replaying videos and calling it "recap" so exasperating ugh.
Yeah a whole episode no baby stuff