Thank you my sister has the same car same problem if you figure out what is doing it please share I’ll keep checking your stuff again you rock if your a dad happy late Father’s Day !!!! If not sorry you still ROCK !!!! ❤
My new 23 has exactly 1000 miles on it and my screen went blank. Actually had a short white line for bit then nothing. Watched another video and it's easier to just pull fuse #38 in the fuse box next to the battery, in case you don't have a wrench. There is a small plastic yellow fuse removing tool on the underside of the fuse box lid
@@psilocybinmushroom4165 You need to do the U-Connect reset. Get in the car and shut the door. Push the start button to the run position with foot OFF the brake. Engine must not be running. Wait until all the ding dongs, warnings and flashing lights settle down. Now, this is important; Push in the volume control and Browse/Enter buttons at exactly the same time. Do not let go until you see the splash screen on the display. WAIT until the system fully boots up. Now shut the car completely off. Wait 30 seconds. Now the dashboard is back to normal. -John
This is kinda what it’s happening to my screen it turns on to the logo screen and turns off repeatedly then it will turn on completely but a minute later it turns off and repeats process 😭 and idk what too do…
Thank you my sister has the same car same problem if you figure out what is doing it please share I’ll keep checking your stuff again you rock if your a dad happy late Father’s Day !!!! If not sorry you still ROCK !!!! ❤
My new 23 has exactly 1000 miles on it and my screen went blank. Actually had a short white line for bit then nothing. Watched another video and it's easier to just pull fuse #38 in the fuse box next to the battery, in case you don't have a wrench. There is a small plastic yellow fuse removing tool on the underside of the fuse box lid
jus pull it and wait a bit and put it back in?
You really don't need to wait just take it out and pop it back in.
@@psilocybinmushroom4165 You need to do the U-Connect reset.
Get in the car and shut the door.
Push the start button to the run position with foot OFF the brake.
Engine must not be running.
Wait until all the ding dongs, warnings and flashing lights settle down.
Now, this is important;
Push in the volume control and Browse/Enter buttons at exactly the same time.
Do not let go until you see the splash screen on the display.
WAIT until the system fully boots up.
Now shut the car completely off.
Wait 30 seconds.
Now the dashboard is back to normal.
-John
This is kinda what it’s happening to my screen it turns on to the logo screen and turns off repeatedly then it will turn on completely but a minute later it turns off and repeats process 😭 and idk what too do…
same here
My shit doing the same thing
🎉🎉 it’s worked, Thanks you ❤
It worked on my 2012 charger thanks i saved me some money from
It worked just happen Ed to me
So helpful thank you..
this didn’t work on my 2012 chrysler 300 i held it for even 20 secs and it did nothing
Ima make my video tomorrow thank me later that batter shit take to long