One thing that I noticed when you were putting the pipe on, you didn't take the restrictor out of the silencer of your pipe, that could help you a lot as well.
A Big bore kit is not going to change the speed because it does not change the RPM of the motor it gives it more torque which will allow you to accelerate quicker. Any speed mod must be done during the transfer of power to the wheel. Unless you upgraded your ignition and possibly got a higher Red line.
2008 bugeye ebay 70cc head and 88$ fly pig exhoust 49 mph stock variator and clutch doing full stage6 street race with crank waiting on yasuni r exhoust
The things are showing it down. There's also a restrictor in the muffler. You need to take it out. There are videos of how on TH-cam. Also, you need a bigger barn. I would suggest a 21mm DelOrto with a 92 main jet and cone air filter, and you need to raise the grading at the back wheel. Mine does 67mph and still pulls wheelies accidently of the line.
I’ve got the Yamaha C3 which is the same motor as the 4 stroke Zuma and stock weights for it is 6grams. All I’ve done to mine is put the Polini Hi-speed kit on it. It’s the variator, 4.9gram weights, and the blue contra spring and green tension springs for the clutch and that’s it. I haven’t done anything else to the bike, and I’m get 52mph out of it! It’s still a 50cc.
Uuhhh.....if your only getting 46mph with a Good 70cc bbk , pipe and variator on a 08+ bugeye....something is very wrong. My 100% stock 50cc (full throttle mod done)09 bugeye would do 48mph..
One thing that I noticed when you were putting the pipe on, you didn't take the restrictor out of the silencer of your pipe, that could help you a lot as well.
what we’ve all been waiting for! 😲😲😲
Definitely need to up the weights in the CVT revs up way too fast during acceleration
A Big bore kit is not going to change the speed because it does not change the RPM of the motor it gives it more torque which will allow you to accelerate quicker. Any speed mod must be done during the transfer of power to the wheel. Unless you upgraded your ignition and possibly got a higher Red line.
i heard heavy clutch weights will help top end
Change out that white spring for a medium and tell me what you think. you have strong torque springs with a white soft spring.there supposed to match.
I have the clutch springs from Polini, and the white spring from them is the stiffest. Iv tried swapping every spring…
2008 bugeye ebay 70cc head and 88$ fly pig exhoust 49 mph stock variator and clutch doing full stage6 street race with crank waiting on yasuni r exhoust
This actually helps alot! tank you!
my old scooter was bone stock but de restricted and did 50mph "2012 scarabeo piaggio"
What app are you using? Thanks
throttle mod you should be hitting 60 plus . Seems like your not letting it open up all the way which is why your stuck in the 40s mph.
The things are showing it down. There's also a restrictor in the muffler. You need to take it out. There are videos of how on TH-cam. Also, you need a bigger barn. I would suggest a 21mm DelOrto with a 92 main jet and cone air filter, and you need to raise the grading at the back wheel. Mine does 67mph and still pulls wheelies accidently of the line.
weak !!! my 49cc goes 53mph with an exhaust and throttle mod and removing the governor - I weight 215 also
Do you have both the restrictions out of the yasuni cause it has 2
how much psi you put in your tires
Whath carburador you use
What gram weights are you running?
6 gram seems to be good
I’m going to do the full throttle mod on the carb cam and tune from there so the rollers might change for me.
I’ve got the Yamaha C3 which is the same motor as the 4 stroke Zuma and stock weights for it is 6grams. All I’ve done to mine is put the Polini Hi-speed kit on it. It’s the variator, 4.9gram weights, and the blue contra spring and green tension springs for the clutch and that’s it. I haven’t done anything else to the bike, and I’m get 52mph out of it! It’s still a 50cc.
Hmm i have a 50cc areox with leo vince tt and 4.5g weights doing 53mph. Summat wrong being a 70cc cdi restriction or fuel shortage like jets
It has to be that he didn't shave off the governor
Your parts list isn’t working, btw
The website is currently down. Sorry about that. If you email me at mintworxtv@gmail.com I can send you a parts list
@@MintWorxTv Dope! Thanks!
its taking way too many rpms you sdhould get a new sports variator and put in some bigger rollers
Without a bigger carb and gears your top speed won't be that good
Uuhhh.....if your only getting 46mph with a Good 70cc bbk , pipe and variator on a 08+ bugeye....something is very wrong.
My 100% stock 50cc (full throttle mod done)09 bugeye would do 48mph..
Not sure what it could be. I have videos showing exactly what Iv done to the bike
@@MintWorxTv do you even have the full throttle mod done? Haven't seen you mention it yet in your videos.
@@MintWorxTv and did you take the 2nd restrictor out of the muffler? Yasuni's usually have two.
@@chrisapolinar1102 There was only one restrictor on the cylinder side. No restrictor on muffler side
@@chrisapolinar1102 No I do not. Probably should!
Buy a yasuni r its way better than the yasuni z
What happen to your channel