I got my fly sky to work. But it will only turn one way, but to get it to go the other way I adjust the steering trim, which is still EASY!. I just don't know why it won't go the other way. Any ideas I have it set up exactly as you do
I tried hit channel 3 right when I turn it on, hit it again it starts moving one way, go to servo reverse Nd switch it, and it just goes faster in the same way, if I hit ch3 to stop it it works, then I go to steering trim and move it all the way to right to make it pull back in
Are you using your reverse servo when you go the other way?? Ill post a video Wednesday with the servo portion.... Hope it will help out a lot of you guys running a servo winch
Mike Secondo in the same fashion as this video, can be done several ways. One is to use an old servo board and solder your wires where the motor wires would go, the LEDs. Then once you plug them into your 3rd ch you can switch them back and forth and have them turn on & off hope that helps
Hi! This really works with my winch but my tires wont turn freely. Do you know how to solve this problem? I would really appreciate it if you do. Thanks bro.
+jewis money banks What you do is you go to the E Points on your radio and depending on the channel you select that channel with the wheel. Then you scroll again and click on end so it can switch to the percentage, this is where you scroll to go up or down on the percentage. Let me know if this helps.
This was great! I was trying different set ups on this and couldn't get it working until now. Thanks for this tip!
@ Jefferson Spezia yes it should as long as you keep the same settings. Glad I can help. Thanks for the feedback
i was onto something by myself. but your method works perfectly on my 3racing winch! great stuff man! saved me a lot of head scratching;-)
thank you just got my gt3b today and this helped to get my winch work correctly
thanks again
Hey no problem I'm here to help as much as I can!!! Thanks for the feedback
I got my fly sky to work. But it will only turn one way, but to get it to go the other way I adjust the steering trim, which is still EASY!. I just don't know why it won't go the other way. Any ideas I have it set up exactly as you do
Very good job, if I plug in a modified servo winch will work the same?
Hey glad I can help... Thanks for the feedback brotha!!!!! Like always keep them tires on the ground...
done this to my flysky gt3c today and it really works thanks for the great vid
@phantomscaler hey not a problem anything else let me know ill post it up. Glad I can help
I tried hit channel 3 right when I turn it on, hit it again it starts moving one way, go to servo reverse Nd switch it, and it just goes faster in the same way, if I hit ch3 to stop it it works, then I go to steering trim and move it all the way to right to make it pull back in
Thanks for the feedback....Awesome it worked for you as well.
Are you using your reverse servo when you go the other way?? Ill post a video Wednesday with the servo portion.... Hope it will help out a lot of you guys running a servo winch
hello sir I have some question. how to stop the feeding out?
thanks in advance.
Yes sir with a servo winch it does work if you don't have a gear that locks the servo.
If I use a servo winch will this work
Will i be work with 3racing winch ?
How do you assign channel 3 to turn lights on and off??
Mike Secondo in the same fashion as this video, can be done several ways. One is to use an old servo board and solder your wires where the motor wires would go, the LEDs. Then once you plug them into your 3rd ch you can switch them back and forth and have them turn on & off hope that helps
Will this work on the FS it4 as well ive been looking at it and am trying to get as much info as possible
Great tip man saved me 20 bucks! subscribed!
Hi! This really works with my winch but my tires wont turn freely. Do you know how to solve this problem? I would really appreciate it if you do. Thanks bro.
where can i get a winch
no.. running out or in ... ???
Will these work with led lights?
Traxxas muhamad yes it will just install on 3rd channel and you should be good.
how do you mess with the end point?
+jewis money banks What you do is you go to the E Points on your radio and depending on the channel you select that channel with the wheel. Then you scroll again and click on end so it can switch to the percentage, this is where you scroll to go up or down on the percentage. Let me know if this helps.
+RC In Motion thanks It worked
Awesome please let me know if I can help in any way. Thanks again for subscribing and following along my channel.
Thanks man. If not it still works the way I have it setup
Super cool idea you are awesome.
Hey not a problem always here to help save some bucks... Thanks for the feedback
thank for your advice men thank you alot...
Thank you ima use ur method thanks bro
Well let me try my servo and ill post a video Sunday if I can I couldn't post a video cause I was working but ill definitely help you out.
It’s really 👌👍👍👍👍👏 thanks you
Mmkay
But