Hello Victor, Dennis here, I wanted to thank you once again for posting the Klipper update to the CR10S Pro. I have been printing threshold ramps for the house. My wife fell and broke her foot. She is now using a scooter and we have some Texas class Speed bumps. I cranked up my Fusion 360 and Printed a few profiles then dialed in to and product a nice three piece ramp set i Super Glued and put down so she can easily navigate the monster threshold. Using PLA Pro + 3mm layers 20% infil at 180 mm/s and prints are just beautiful. I can monitor the prints process via Mainsail even Web Cam and ETA updates via WiFi. Its great, I tell her the new ramp is done I will be right back and she knows I will. Thank You again for helping the masses find Nirvana in the 10s Pro, VIA KLIPPER & Mainsail D&M
Hi Dennis, great to hear from you. Awesome job on creating the ramps for your wife. I bet you can sell them on Facebook Marketplace to help others solve the same problems. Nothing better than a few extra bucks to help you continue learning and fund this amazing hobby. Klipper is amazing and bringing new life to very capable older machines makes me happy.
Thanks for presenting us with this information. I've been struggling with my m5P and every step of your instructions gave the correct response on my terminal. I'm thrilled to have a working printer instead of a pile of junk thrown against the wall :)
Hi Seadog, I'm glad you found value in this video for your viewing time. Yeah, I hear you, one would think that flashing the firmware would be a simple affair. Unfortunately I was unable to get a successful flash using the SD card method.
Victor, this tutorial is perfect. When my Manta M8P arrives I'll take it for a test configuration run. Well Done my friend. I did note that the last section of the document relates to the stepper Vref settings and I will get you an updated copy of it as my original work was based on the PEAK current. Creality steppers work on the RMS value. So if someone calculates the Vref in this old document please multiply your result by .707 ( RMS Constant) to get the correct Vref. Victor I'm looking forward to the M8P arriving as I'm setting up a three axis Z configuration for an Ender 3 CoreXY conversion to improve tramming and bed meshing and to see how it works with the adaptive bed mesh feature. Your document and tutorial looks like the ticket forward. Thanks a lot for paving the way to success with the BTT Manta and CB1. The CB1 heat sink got lost in the mail........go figure. Great job again sir. Doug
Hi buddy, Thank you for revising the vref document, I'll edit the PDF guide to update it. Yeah, please let me know how it goes for you so I can tweak and make it better. The Direct Firmware Updater feature works great, no more finicky about the SD card issues.
Cool, man, please let me know what you find. That y-limit switch not registering as triggered only when the x-limit switch is depressed is still puzzling me.
@@vbaredYour X and Y home switch is puzzling for sure. I'll see what this one is when I get it in the E5 Pro. A good review of the cable pin crimps, plugs, the switch being N.C. and opening when contacted both X & Y endstop_pin assignments. On this M5P X = ^PD3 and Y = ^PD2 although I'm sure you have covered all of them, just thinking here. I do need to install the board to test the hardware. It might be a few day or so. The CB1 + M5P build from your document went good although I would like to go over the Boot & Reset section once more. Cheers Doug
Hello, again a big thanks for the series of video on the M5P, it have been super helpful, the videos are very clear and your way to explain make it super easy + the complementary pdf with all the command, i´ve just finished insaling klipper flashed the firmware and installed the ADXL345 sensor following your instructions, I just need now to plug everything and finish to configure the printer.cfg Sooooo many thanks for your dedications and the work you have put in those vids 😃
Hi Francois, My apologies for my late reply. I was going to post a video on the actual installation into my Ender 3 V2 but haven't finished editing it yet. What questions do you have on it so I can try to help you get it installed.
Yeah, Brian, this thing was killing me softly over the last few days. Thankfully I found enough of the pieces of information to understand it all and make it work properly.
Hi Victor, Here are a couple more bits I have found during this Manta M8P build. I added a line to the fan section of the printer.cfg file which will turn on my fan 3 ( Chassis Cooling ) when ever the X motor is commanded such as in a Home function. This allows the fan to be cooling all the time not just when the hotend or bed is turned on. [controller_fan controllerFan3] pin: PE5 # This is fan 3 on the Manta M8P, check the pin for your fan and board. max_power: 1.0 fan_speed: 1 kick_start_time: 0 stepper: stepper_x I also added this line to the printer.cfg file in the [extruder] section to move the minimum extruder temperature from the Klipper default of 170 degrees. That seemed a little low for PETG so this line will move it up to 200. Edit the valued for whatever works for your filament. min_extrude_temp: 200 One other thing is that the SAVE_CONFIG command does not work for this Klipper build, any thoughts. Thanks again Doug.
Hi buddy, Thank you for sharing the chassis fan info to help keep the noise level down when the printer isn't being used. Wow, 170 for PETG is crazy low. That's a recipe for a jam or stripped filament at the extruder. The lowest the SUNLU branded PETG will extrude is 180 but at that temp the extrusion lines will be inconsistent and the layers won't bond properly. 225-240 works best for me. It's interesting to me that some of my machines that use identical parts like slightly different print temperatures. All the best :)
Victor, THANK YOU. I've been searching for information and help with the Manta M5P + CB1 set up (just like mine). I'm having issues because when I plug my ADXL345 in the MCU (Manta board) is not seen/no serial connection is made. I unplug it, and it comes right up. I have the wiring correct and followed your document for flashing. It seems plugging into the SPI port (just below the SD card slot) is the issue - I've even commented out all the parts dealing with the ADXL345 in the printer.cfg file. Got any suggestions?
Hi friend, Thank you for commenting and encouragement. I'm glad you found value in this video for your viewing time. There are issues with some of Bigtreetech's most current CB1 images. Use version 2.3.2 as is and don't update Klipper. Best of luck with your mods :)
Finally a video which does not skip crucial steps ! Thanks a lot ! One question, the ribbon cable which comes with the TFT35 SPI is pretty short for me... I searched the numbers printed on the back of the provided ribbon cable(AWM 20624 cable), turns out it is a generic cable which sells online, but all of them have different number of wires in them...10, 15, 20 etc... and the original SPI cable has 9 wires in it. If I buy the longer cable with 10 wires in it...cut one wire and use it...will it work ?
Hi Aryan, Thank you for commenting and encouragement. I'm glad you found value in this video for your viewing time. I haven't had to adapt a ribbon cable yet but it should work so long as the space between the connection pads is the same as the one that came with the display. Best of luck with your mods :)
This is a great tutorial and exactly what I needed. My M5P+CB1 and TFT35 arrived a few days ago and I'm finally taking the plunge. Weird issue...followed your steps to the letter but once I flash the image onto the SD card and boot like at 23:15 I just get a white screen. Red LED near the processor goes solid but nothing else. Thoughts? Edit: After letting it sit for about 10 min the green LED began flashing as expected but never got anything on the display...just a solid white screen.
Hello, Thank you for commenting and encouragement. I'm glad you found value in this video for your viewing time. A couple of things to check: Make sure you are using CB1 image version 2.3.2 and don't update Klipper once it's installed, images 2.3.3 and 2.3.4 won't work properly using this guide. The others thing to verify is that the BoadENV.txt file has the proper entries in it per the PDF instructions.
@@vbared Sigh...I feel like such an idiot. I totally forgot I had also got an EMMC version of the CB1 and that was the one I had installed on the board. I moved the standard CB1 to the PI4 adapter board. D'OH!!! So after much self recrimination and berating myself I got it up and running. And boy howdy are you right that the steps in your guide don't work for the 2.3.4 release. But now I have a running klipper screen and can go through the rest of the configuration. This is for another day though. But I've bookmarked your guide and I'll be using it when I get the Pi4 adapter going. 😀
@@Enjoymentboy No such thing, only learning. Yeah, the eMMc version requires some different steps. Great job getting it going, it can get frustrating learning new processes. Best of luck with your mods!
Hi Adam, I haven't tried plugging anything into that port. Give one of these solutions a try. Please let me know if one of them worked for you. www.reddit.com/r/BIGTREETECH/comments/105zm18/hdmi_on_manta_m8p_with_cb1_not_working/
@@vbared Actually, it looks like the mini hdmi port on the front can not be used with the cb1, only when you use a pi. Appreciate your assistance and the link though
Nevím proč, ale ADXL ni stále hlásí chybu Invalid adxl345 id (got 0 vs e5). tři čipy jsem vyzkoušel a vedení jen deset cm, stejně se nespojí. Je potřeba něco vypnout nebo nějak jinak nastavit? Zbývá mi jedině pořídit čip na USB jiné řešení mě už nenapadá , to jsem i stínění zkoušel a stále chyba
I have now done 5 rebuilds because of the "update all" in the machine side of Klipper. My rule " for me " now is if an update showed an orange warning notice, I don't update that component. When they get the bug fixed in it then I will. No orange warning is an update go. Just my nickel. Doc'
Yeah, I agree with you, it seems that I was lucky not to have had an issue with the first one I did but the second one gave me the same problems. If it ain't broke don't fix it.
hi mr tnx for thist tutorial , i have Same Board But My Steper Driver is tmc2100 and a4988 , Please Can You tell me What Config To be in cfg Driver Section , thanks You
Hi buddy, Please excuse the delay in answering your comment, I had to do some digging. I don't believe that you need to enter any of the stepper driver configuration fields for the 4988 or the TMC2100 since they are treated as standalone. The TMC2209 and TMC2130s have some specific features that require UART mode and the the extra entries in the printer.cfg which are commented out by default in the M5P printer.cfg Check out page 10 of the link below because they mention the 4988 specifically and the need to have a jumper across SLP and RST pins of each. I would guess that the TMC2100 would be treated the same way unless there are some specific settings for them in the manual, but I didn't see them listed. github.com/bigtreetech/Manta-M5P/blob/master/BIGTREETECH%20MANTA%20M5P%20V1.0%20User%20Manual.pdf
Hi Victor, Really great video tutorial. It has helped me a lot but not the whole way :-). I have the Manta m5p+CB1+HDMI 7 screen and I want to use the Micro SD card to get klipper running. I've done everything according to your video. But from min. 28 and forward I got lost 😞. The printer.cfg is "Generic Bigtree tech Manta m5p". I only get: "Printer is not ready The klippy host software is attempting to connect. Please retry in a few moments." / or: "Klipper reports: ERROR mcu 'mcu': Unable to connect Once the underlying issue is corrected, use the "FIRMWARE_RESTART" command to reset the firmware, reload the config, and restart the host software. Error configuring printer" What am I doing wrong? Can anyone help???? The document you are showing "manta m5p+cb1 mainsail klipper flashing guide 3-1-2024 pdf" I can't find it Best regards Kent Sweden
Hi Kent, I learned about this DFU flashing method after making this video. Check out this video I made about it, hopefully you can get things working properly. th-cam.com/video/a6VTu1JE3BY/w-d-xo.html Cheers from Texas, USA
Děkuji za návod, ale nefunguje mi . Potřebuji zapojit kameru, což je divné že nemá ovladač, pak mi nejde zadat heslo v putyy a vaše rada nestačí, prostě to nejde ať se snažím jak chci, také by mě zajímalo, SD karta musí zůstat stále vložená? A co je divné ani mi nebliká zelená, jenže jsem v mainsailu. Také schází jak nastavit Z osy aby sami nastavili ofset , tedy srovnali podložku a jak to je s fluidd, ten se musí instalovat? Jak? Já vím je toho hodně co se ptám , ale jako laik v klipper je to prostě složité. Každopádně děkuji za vaše rady , alespoň trochu jsem pokročil. Moje tiskárna je corexy a také schází kroky pro BGM , jak nastavovat převod. Pokud to doplníte bylo by to perfektní a skvělé
Dobrý den, příteli, děkuji za komentář. Pojďme si vaše otázky rozebrat. 1. Kamera - ujistěte se, že kamera, kterou se pokoušíte použít, je podporována (ovladače jsou pro tyto kamery již nainstalovány). Existuje mnoho modelů Logitech uvedených spolu s testovanými rozlišeními. Za nejkvalitnější bych považoval modely 1920x1080p s 30 snímky za sekundu. 2. Hesla PuTTy - Při přihlašování pomocí PuTTy uživatelské jméno registruje stisky kláves a zobrazuje, co píšete, ale hesla ne. Vypadá to, že se při psaní nic neděje, ale heslo je zadáno, takže pokud uděláte chybu, stačí několikrát stisknout backspace na klávesnici, jako byste něco psali, a znovu správně zadat heslo a stisknout enter. Model CB1 Uživatelské jméno: biqu Heslo: biqu. 3. SD karta - Ano, SD karta je stejná jako pevný disk vašeho počítače a musí zůstat nainstalovaná v CB1, aby fungovala. 4. Blikající zelené světlo - Při prvním zapnutí Raspberry Pi byste měli vidět hodně blikání, když načítá informace z SD karty. Jakmile systém běží na volnoběh, neuvidíte žádné další blikání. 5. Z-offset - Postupujte podle pokynů na straně 18 níže uvedeného PDF a nastavte svůj z-offset. mega.nz/file/9NcACDZI#VMIDaij3Yu6UIwnReTxbUEFby_Wlcg_0_Z8oz3FR3A4 6. Fluidd - je jen další grafické rozhraní Klipper. Průvodce v tomto videu nainstaluje Mainsail jako rozhraní. 7. BMG extruder - Nepoužil jsem žádný, ale našel jsem tyto informace, které by vám mohly pomoci na to přijít. www.reddit.com/r/klippers/comments/lm3cr4/bmg_extruder_tuning/
@@vbared Děkuji za vaše upřesnění, jen k mé chybě s připojením, mě se nezobrazovalo vůbec moje připojení ve Wireless N.W. Je to potřeba změnit a na to jsem později přišel, pak se mi vůbec nezobrazuje device name, nevím proč, když jiné se ukazují, takže nakonec jsem použil IP address. Také jsem zadával svoje heslo , a to není správně, ale už jsem to překonal, jen mě to pozlobilo a vlastně jsem ani nečekal vaší brzkou reakci, toho si hodně vážím a děkuji za takovou super práci a pomoc ostatním. jste nejlepší a za to veliký dík. A kamera a podrobný návod by se hodil, nikde totiž není video. Já pokud ji připojím systém vůbec nenaběhne a to je divné, je jen bílá obrazovka takže hledám dobrý návod co s tím (diyzone.aliexpress.com/store/1270976?spm=a2g0o.detail.1000061.1.48d7ciO8ciO8Oh) Jde o kmeru z ali express značka SHCHV. S BGM si poradím, jen přestavuji na coreXZ a tak je to trochu náročnější. Hlavně sestavit printer.config. Berte to hlavně jako náměty co by bylo nápomocné, stejně jak instalovat Fluid a otázek by bylo hodně. Přesto děkuji za vaše rady. Skvělá práce
Hi Smoke, try a different USB to Micro USB cable and make sure that the one you play to use supports data transmission. It sounds like the cable that isn't working is a charge only (lacks the green and white data wires) cable or you could have a bad data cable. I've had new data cables not work straight out of the package.
@@vbared I have mine in the printer already. I had to wipe and restart because I had issues with the ui not working. Figure I would start from scratch. So I need to have it connected via usb?
@@SMOKE3104 Yes, that ls/dev is a request to confirm that the Raspberry Pi can talk to the printer. If you don't get a response that include the serial address but an error of some kind then it's most likely the cable.
Hi Victor, Regarding.....One other thing is that the SAVE_CONFIG command does not work for this Klipper build. This issue has been resolved, YEA!. It is caused by using a web based example_printer_config file. These files might have a different format than Klipper understands. I found that if I used my original printer.cfg file, saved prior to the mother board upgrade, and then added the edits from the BTT example files to my existing printer.cfg file everything worked as expected including the SAVE_CONFIG command. Live and learn..Thanks again for your effort yesterday. The Z: drive is up and running again. Having fun yet !!! Doug.
Hi friend, Yeah, I was stumped with that issue. Great job in figuring out the cause and getting everything working properly. I wonder if grabbing the base config file from the CB1 example_config folder causes the same issue. Enjoy your day :)
@@vbaredYes Victor I do think the BC1 example folder was the underlying issue. All good now except for motor 7 & 8. BTT is a little stumped as well. Doug
@@vbared Díky za odpověď, ale už mi vše funguje a ano byli shodné, problém byl tuším v macro už si nepamatuji bylo toho hodně co bylo potřeba upravit. Velikou roli hraje i verze instalace, dnes už hodně věcí je jinak
Hi friend, thank you for commenting. Unfortunately for me I was unable to get both the ADXL345 and TFT35 working at the same time on the Manta M5P+CB1 following their instructions at the time so I had to dig through the forums to find the right combination of steps to make it all work for me. If you aren't running into any issues just follow the BTT instructions, they may have updated them. Best of luck with your build :)
Ohhh. Well i am planning the same, but y make the adxl permanant? Manage to get her goin, minus sum kinda uart driver error on a 2209. Will dive back in soon. But im runnin the cb2 after giving up on trying the m5 with jus a btt-pi and uart chip. Clearly the engineers are not the ones answering emails.. TY
Chtěl bych vám poděkovat, za vaše videa bez nich bych jen těžko správně nastavil svoji úpravu Sermoon D1 ze které je dnes Sermoon core xy s Manta 5 a CB1+ TFT monitor, nebylo to snadné, ale jste jediný kdo takto podrobně ukázal jak postupovat, znovu Děkuji
Hola me llamo Sergio soy de españa no hablo ingles, pero estoy viendo tu video con los subtitulos, he adquirido una btt para conectarla con una skr mini y instalar klipper, sin ronper nada jeje y he visto en el manual de la SKR MINI 3.0 y que recomiendan no cobectarla sin todos los cables eso me genera dudas por que viendo el video veo que lo haces sin conectar nuchas cosas mi pregunta es si puedo programarla para una maquina TROXY X5SA 330X 300 X400 gracias de antemano y espero tus comentarios saludos cordiales,,,
Hola Sergio, Enhorabuena por actualizar tu impresora corexy a Klipper. Es probable que el manual le diga que no encienda la placa sin que se hayan completado todas las conexiones para evitar que los cables sueltos expuestos toquen y dañen la placa de control. Pero si tienes cuidado, la placa solo necesita energía y ambos termistores conectados junto con el cable USB a una Raspberry Pi o CB1 para instalar y configurar Klipper. Ni siquiera necesita tener instalados los controladores paso a paso TMC para que se encienda.
Hello, thank you for commenting and suggesting the CB2 released last month. I had seen the Manta 3 E3Z but that was way after picking up 2 Manta M5P+CB1s last year. Let me know when you release a video on setting up your CB2 and Manta 3E3Z so I can learn from your experience. Best of luck with your mods :)
Man we would be dead in the water without your videos. Thank you.
Thank you for commenting, friend, I'm glad you found value in this video for your viewing time. Best of luck with your mods :)
this is the exact type of the video I needed, thank you do much! you got yourself a sub :)
I appreciate you, brother :)
Hello Victor, Dennis here, I wanted to thank you once again for posting the Klipper update to the CR10S Pro. I have been printing threshold ramps for the house. My wife fell and broke her foot. She is now using a scooter and we have some Texas class Speed bumps. I cranked up my Fusion 360 and Printed a few profiles then dialed in to and product a nice three piece ramp set i Super Glued and put down so she can easily navigate the monster threshold. Using PLA Pro + 3mm layers 20% infil at 180 mm/s and prints are just beautiful. I can monitor the prints process via Mainsail even Web Cam and ETA updates via WiFi. Its great, I tell her the new ramp is done I will be right back and she knows I will. Thank You again for helping the masses find Nirvana in the 10s Pro, VIA KLIPPER & Mainsail D&M
Hi Dennis, great to hear from you. Awesome job on creating the ramps for your wife. I bet you can sell them on Facebook Marketplace to help others solve the same problems. Nothing better than a few extra bucks to help you continue learning and fund this amazing hobby. Klipper is amazing and bringing new life to very capable older machines makes me happy.
Thanks for presenting us with this information. I've been struggling with my m5P and every step of your instructions gave the correct response on my terminal. I'm thrilled to have a working printer instead of a pile of junk thrown against the wall :)
Hi Seadog, I'm glad you found value in this video for your viewing time. Yeah, I hear you, one would think that flashing the firmware would be a simple affair. Unfortunately I was unable to get a successful flash using the SD card method.
Victor, this tutorial is perfect. When my Manta M8P arrives I'll take it for a test configuration run. Well Done my friend. I did note that the last section of the document relates to the stepper Vref settings and I will get you an updated copy of it as my original work was based on the PEAK current. Creality steppers work on the RMS value. So if someone calculates the Vref in this old document please multiply your result by .707 ( RMS Constant) to get the correct Vref. Victor I'm looking forward to the M8P arriving as I'm setting up a three axis Z configuration for an Ender 3 CoreXY conversion to improve tramming and bed meshing and to see how it works with the adaptive bed mesh feature. Your document and tutorial looks like the ticket forward. Thanks a lot for paving the way to success with the BTT Manta and CB1. The CB1 heat sink got lost in the mail........go figure. Great job again sir.
Doug
Hi buddy, Thank you for revising the vref document, I'll edit the PDF guide to update it. Yeah, please let me know how it goes for you so I can tweak and make it better. The Direct Firmware Updater feature works great, no more finicky about the SD card issues.
Greetings, My Manta M5P arrived yesterday so I'm going to test all the issues again with your board. Let the games begin. Doug
Cool, man, please let me know what you find. That y-limit switch not registering as triggered only when the x-limit switch is depressed is still puzzling me.
@@vbaredYour X and Y home switch is puzzling for sure. I'll see what this one is when I get it in the E5 Pro. A good review of the cable pin crimps, plugs, the switch being N.C. and opening when contacted both X & Y endstop_pin assignments. On this M5P X = ^PD3 and Y = ^PD2 although I'm sure you have covered all of them, just thinking here. I do need to install the board to test the hardware. It might be a few day or so. The CB1 + M5P build from your document went good although I would like to go over the Boot & Reset section once more. Cheers Doug
Hello, again a big thanks for the series of video on the M5P, it have been super helpful, the videos are very clear and your way to explain make it super easy + the complementary pdf with all the command, i´ve just finished insaling klipper flashed the firmware and installed the ADXL345 sensor following your instructions, I just need now to plug everything and finish to configure the printer.cfg
Sooooo many thanks for your dedications and the work you have put in those vids 😃
Hi Francois, My apologies for my late reply. I was going to post a video on the actual installation into my Ender 3 V2 but haven't finished editing it yet. What questions do you have on it so I can try to help you get it installed.
Victors back with another video
Yeah, Brian, this thing was killing me softly over the last few days. Thankfully I found enough of the pieces of information to understand it all and make it work properly.
Hi Victor, Here are a couple more bits I have found during this Manta M8P build.
I added a line to the fan section of the printer.cfg file which will turn on my fan 3 ( Chassis Cooling ) when ever the X motor is commanded such as in a Home function. This allows the fan to be cooling all the time not just when the hotend or bed is turned on.
[controller_fan controllerFan3]
pin: PE5 # This is fan 3 on the Manta M8P, check the pin for your fan and board.
max_power: 1.0
fan_speed: 1
kick_start_time: 0
stepper: stepper_x
I also added this line to the printer.cfg file in the [extruder] section to move the minimum extruder temperature from the Klipper default of 170 degrees. That seemed a little low for PETG so this line will move it up to 200. Edit the valued for whatever works for your filament.
min_extrude_temp: 200
One other thing is that the SAVE_CONFIG command does not work for this Klipper build, any thoughts. Thanks again Doug.
Hi buddy, Thank you for sharing the chassis fan info to help keep the noise level down when the printer isn't being used.
Wow, 170 for PETG is crazy low. That's a recipe for a jam or stripped filament at the extruder. The lowest the SUNLU branded PETG will extrude is 180 but at that temp the extrusion lines will be inconsistent and the layers won't bond properly. 225-240 works best for me. It's interesting to me that some of my machines that use identical parts like slightly different print temperatures.
All the best :)
Victor, THANK YOU. I've been searching for information and help with the Manta M5P + CB1 set up (just like mine). I'm having issues because when I plug my ADXL345 in the MCU (Manta board) is not seen/no serial connection is made. I unplug it, and it comes right up. I have the wiring correct and followed your document for flashing. It seems plugging into the SPI port (just below the SD card slot) is the issue - I've even commented out all the parts dealing with the ADXL345 in the printer.cfg file. Got any suggestions?
Hi friend, Thank you for commenting and encouragement. I'm glad you found value in this video for your viewing time. There are issues with some of Bigtreetech's most current CB1 images. Use version 2.3.2 as is and don't update Klipper.
Best of luck with your mods :)
Ok. Thank you. I'll save my config and re-flash the CB1 and NOT update Klipper. That'll be hard for me 😉 but I think I can do it , lol 😆.
Finally a video which does not skip crucial steps ! Thanks a lot !
One question, the ribbon cable which comes with the TFT35 SPI is pretty short for me... I searched the numbers printed on the back of the provided ribbon cable(AWM 20624 cable), turns out it is a generic cable which sells online, but all of them have different number of wires in them...10, 15, 20 etc... and the original SPI cable has 9 wires in it. If I buy the longer cable with 10 wires in it...cut one wire and use it...will it work ?
Hi Aryan, Thank you for commenting and encouragement. I'm glad you found value in this video for your viewing time. I haven't had to adapt a ribbon cable yet but it should work so long as the space between the connection pads is the same as the one that came with the display.
Best of luck with your mods :)
Very Helpful, thanks!
Hi friend, Thank you for commenting and encouragement. I'm glad you found value in this video for your viewing time.
Best of luck with your mods :)
This is a great tutorial and exactly what I needed. My M5P+CB1 and TFT35 arrived a few days ago and I'm finally taking the plunge. Weird issue...followed your steps to the letter but once I flash the image onto the SD card and boot like at 23:15 I just get a white screen. Red LED near the processor goes solid but nothing else. Thoughts?
Edit: After letting it sit for about 10 min the green LED began flashing as expected but never got anything on the display...just a solid white screen.
Hello,
Thank you for commenting and encouragement. I'm glad you found value in this video for your viewing time. A couple of things to check:
Make sure you are using CB1 image version 2.3.2 and don't update Klipper once it's installed, images 2.3.3 and 2.3.4 won't work properly using this guide. The others thing to verify is that the BoadENV.txt file has the proper entries in it per the PDF instructions.
@@vbared Sigh...I feel like such an idiot. I totally forgot I had also got an EMMC version of the CB1 and that was the one I had installed on the board. I moved the standard CB1 to the PI4 adapter board. D'OH!!! So after much self recrimination and berating myself I got it up and running. And boy howdy are you right that the steps in your guide don't work for the 2.3.4 release. But now I have a running klipper screen and can go through the rest of the configuration. This is for another day though. But I've bookmarked your guide and I'll be using it when I get the Pi4 adapter going. 😀
@@Enjoymentboy No such thing, only learning. Yeah, the eMMc version requires some different steps. Great job getting it going, it can get frustrating learning new processes.
Best of luck with your mods!
Thank you so much!!
You're most welcome, Ray, thank you for commenting :)
Awesome video. Very helpful! Do you know how to use the hdmi mini port on the front of the board with a cb1?
Hi Adam, I haven't tried plugging anything into that port. Give one of these solutions a try. Please let me know if one of them worked for you.
www.reddit.com/r/BIGTREETECH/comments/105zm18/hdmi_on_manta_m8p_with_cb1_not_working/
@@vbared Actually, it looks like the mini hdmi port on the front can not be used with the cb1, only when you use a pi. Appreciate your assistance and the link though
Nevím proč, ale ADXL ni stále hlásí chybu Invalid adxl345 id (got 0 vs e5). tři čipy jsem vyzkoušel a vedení jen deset cm, stejně se nespojí. Je potřeba něco vypnout nebo nějak jinak nastavit? Zbývá mi jedině pořídit čip na USB jiné řešení mě už nenapadá , to jsem i stínění zkoušel a stále chyba
Is the recent update fix..???I updated raspberry now I can’t ssh lost connection
I have now done 5 rebuilds because of the "update all" in the machine side of Klipper. My rule " for me " now is if an update showed an orange warning notice, I don't update that component. When they get the bug fixed in it then I will. No orange warning is an update go. Just my nickel. Doc'
Yeah, I agree with you, it seems that I was lucky not to have had an issue with the first one I did but the second one gave me the same problems.
If it ain't broke don't fix it.
hi mr tnx for thist tutorial , i have Same Board But My Steper Driver is tmc2100 and a4988 , Please Can You tell me What Config To be in cfg Driver Section , thanks You
Hi buddy, Please excuse the delay in answering your comment, I had to do some digging. I don't believe that you need to enter any of the stepper driver configuration fields for the 4988 or the TMC2100 since they are treated as standalone. The TMC2209 and TMC2130s have some specific features that require UART mode and the the extra entries in the printer.cfg which are commented out by default in the M5P printer.cfg Check out page 10 of the link below because they mention the 4988 specifically and the need to have a jumper across SLP and RST pins of each. I would guess that the TMC2100 would be treated the same way unless there are some specific settings for them in the manual, but I didn't see them listed.
github.com/bigtreetech/Manta-M5P/blob/master/BIGTREETECH%20MANTA%20M5P%20V1.0%20User%20Manual.pdf
Hi Victor, Really great video tutorial. It has helped me a lot but not the whole way :-). I have the Manta m5p+CB1+HDMI 7 screen and I want to use the Micro SD card to get klipper running.
I've done everything according to your video. But from min. 28 and forward I got lost 😞. The printer.cfg is "Generic Bigtree tech Manta m5p".
I only get:
"Printer is not ready The klippy host software is attempting to connect. Please retry in a few moments." / or:
"Klipper reports: ERROR
mcu 'mcu': Unable to connect Once the underlying issue is corrected, use the "FIRMWARE_RESTART" command to reset the firmware, reload the config, and restart the host software.
Error configuring printer"
What am I doing wrong? Can anyone help????
The document you are showing "manta m5p+cb1 mainsail klipper flashing guide 3-1-2024 pdf" I can't find it
Best regards
Kent
Sweden
Hi Kent, I learned about this DFU flashing method after making this video. Check out this video I made about it, hopefully you can get things working properly.
th-cam.com/video/a6VTu1JE3BY/w-d-xo.html
Cheers from Texas, USA
Děkuji za návod, ale nefunguje mi . Potřebuji zapojit kameru, což je divné že nemá ovladač, pak mi nejde zadat heslo v putyy a vaše rada nestačí, prostě to nejde ať se snažím jak chci, také by mě zajímalo, SD karta musí zůstat stále vložená? A co je divné ani mi nebliká zelená, jenže jsem v mainsailu. Také schází jak nastavit Z osy aby sami nastavili ofset , tedy srovnali podložku a jak to je s fluidd, ten se musí instalovat? Jak? Já vím je toho hodně co se ptám , ale jako laik v klipper je to prostě složité. Každopádně děkuji za vaše rady , alespoň trochu jsem pokročil. Moje tiskárna je corexy a také schází kroky pro BGM , jak nastavovat převod. Pokud to doplníte bylo by to perfektní a skvělé
Dobrý den, příteli, děkuji za komentář. Pojďme si vaše otázky rozebrat.
1. Kamera - ujistěte se, že kamera, kterou se pokoušíte použít, je podporována (ovladače jsou pro tyto kamery již nainstalovány). Existuje mnoho modelů Logitech uvedených spolu s testovanými rozlišeními. Za nejkvalitnější bych považoval modely 1920x1080p s 30 snímky za sekundu.
2. Hesla PuTTy - Při přihlašování pomocí PuTTy uživatelské jméno registruje stisky kláves a zobrazuje, co píšete, ale hesla ne. Vypadá to, že se při psaní nic neděje, ale heslo je zadáno, takže pokud uděláte chybu, stačí několikrát stisknout backspace na klávesnici, jako byste něco psali, a znovu správně zadat heslo a stisknout enter.
Model CB1
Uživatelské jméno: biqu
Heslo: biqu.
3. SD karta - Ano, SD karta je stejná jako pevný disk vašeho počítače a musí zůstat nainstalovaná v CB1, aby fungovala.
4. Blikající zelené světlo - Při prvním zapnutí Raspberry Pi byste měli vidět hodně blikání, když načítá informace z SD karty. Jakmile systém běží na volnoběh, neuvidíte žádné další blikání.
5. Z-offset - Postupujte podle pokynů na straně 18 níže uvedeného PDF a nastavte svůj z-offset. mega.nz/file/9NcACDZI#VMIDaij3Yu6UIwnReTxbUEFby_Wlcg_0_Z8oz3FR3A4
6. Fluidd - je jen další grafické rozhraní Klipper. Průvodce v tomto videu nainstaluje Mainsail jako rozhraní. 7. BMG extruder - Nepoužil jsem žádný, ale našel jsem tyto informace, které by vám mohly pomoci na to přijít. www.reddit.com/r/klippers/comments/lm3cr4/bmg_extruder_tuning/
@@vbared Děkuji za vaše upřesnění, jen k mé chybě s připojením, mě se nezobrazovalo vůbec moje připojení ve Wireless N.W. Je to potřeba změnit a na to jsem později přišel, pak se mi vůbec nezobrazuje device name, nevím proč, když jiné se ukazují, takže nakonec jsem použil IP address. Také jsem zadával svoje heslo , a to není správně, ale už jsem to překonal, jen mě to pozlobilo a vlastně jsem ani nečekal vaší brzkou reakci, toho si hodně vážím a děkuji za takovou super práci a pomoc ostatním. jste nejlepší a za to veliký dík. A kamera a podrobný návod by se hodil, nikde totiž není video. Já pokud ji připojím systém vůbec nenaběhne a to je divné, je jen bílá obrazovka takže hledám dobrý návod co s tím (diyzone.aliexpress.com/store/1270976?spm=a2g0o.detail.1000061.1.48d7ciO8ciO8Oh) Jde o kmeru z ali express značka SHCHV. S BGM si poradím, jen přestavuji na coreXZ a tak je to trochu náročnější. Hlavně sestavit printer.config. Berte to hlavně jako náměty co by bylo nápomocné, stejně jak instalovat Fluid a otázek by bylo hodně. Přesto děkuji za vaše rady. Skvělá práce
I was tracking all the way up to the "ls /dev/serial/by-id/*" command. It says "No such file or directory" any ideas on what I could have missed?
Hi Smoke, try a different USB to Micro USB cable and make sure that the one you play to use supports data transmission. It sounds like the cable that isn't working is a charge only (lacks the green and white data wires) cable or you could have a bad data cable. I've had new data cables not work straight out of the package.
@@vbared I have mine in the printer already. I had to wipe and restart because I had issues with the ui not working. Figure I would start from scratch. So I need to have it connected via usb?
@@SMOKE3104 Yes, that ls/dev is a request to confirm that the Raspberry Pi can talk to the printer. If you don't get a response that include the serial address but an error of some kind then it's most likely the cable.
@@vbared Oh, yea, this is on a manta m8p board. I guess that's why I was confused. I think I'm going to disconnect, and reconnect everything.
Hi Victor, Regarding.....One other thing is that the SAVE_CONFIG command does not work for this Klipper build. This issue has been resolved, YEA!. It is caused by using a web based example_printer_config file. These files might have a different format than Klipper understands.
I found that if I used my original printer.cfg file, saved prior to the mother board upgrade, and then added the edits from the BTT example files to my existing printer.cfg file everything worked as expected including the SAVE_CONFIG command. Live and learn..Thanks again for your effort yesterday. The Z: drive is up and running again. Having fun yet !!! Doug.
Hi friend, Yeah, I was stumped with that issue. Great job in figuring out the cause and getting everything working properly. I wonder if grabbing the base config file from the CB1 example_config folder causes the same issue.
Enjoy your day :)
@@vbaredYes Victor I do think the BC1 example folder was the underlying issue. All good now except for motor 7 & 8. BTT is a little stumped as well. Doug
Ještě bych měl jednu otázku, chci přidat teplotní čidlo komory, ale druhé čidlo mi ukazuje 1000 stupňů je někde návod co s tím?
Je druhý senzor stejný jako senzor hotendu? Pokud ano nebo jinak, musí být specifikováno v souboru printer.cfg.
@@vbared Díky za odpověď, ale už mi vše funguje a ano byli shodné, problém byl tuším v macro už si nepamatuji bylo toho hodně co bylo potřeba upravit. Velikou roli hraje i verze instalace, dnes už hodně věcí je jinak
Why are your instructions so different from BTT's!? Still trying to get mine up and runnin, but im not stuck yet...TY
Hi friend, thank you for commenting. Unfortunately for me I was unable to get both the ADXL345 and TFT35 working at the same time on the Manta M5P+CB1 following their instructions at the time so I had to dig through the forums to find the right combination of steps to make it all work for me. If you aren't running into any issues just follow the BTT instructions, they may have updated them.
Best of luck with your build :)
Ohhh. Well i am planning the same, but y make the adxl permanant?
Manage to get her goin, minus sum kinda uart driver error on a 2209. Will dive back in soon. But im runnin the cb2 after giving up on trying the m5 with jus a btt-pi and uart chip. Clearly the engineers are not the ones answering emails.. TY
Chtěl bych vám poděkovat, za vaše videa bez nich bych jen těžko správně nastavil svoji úpravu Sermoon D1 ze které je dnes Sermoon core xy s Manta 5 a CB1+ TFT monitor, nebylo to snadné, ale jste jediný kdo takto podrobně ukázal jak postupovat, znovu Děkuji
Hola me llamo Sergio soy de españa no hablo ingles, pero estoy viendo tu video con los subtitulos, he adquirido una btt para conectarla con una skr mini y instalar klipper, sin ronper nada jeje y he visto en el manual de la SKR MINI 3.0 y que recomiendan no cobectarla sin todos los cables eso me genera dudas por que viendo el video veo que lo haces sin conectar nuchas cosas mi pregunta es si puedo programarla para una maquina TROXY X5SA 330X 300 X400 gracias de antemano y espero tus comentarios saludos cordiales,,,
Hola Sergio, Enhorabuena por actualizar tu impresora corexy a Klipper. Es probable que el manual le diga que no encienda la placa sin que se hayan completado todas las conexiones para evitar que los cables sueltos expuestos toquen y dañen la placa de control. Pero si tienes cuidado, la placa solo necesita energía y ambos termistores conectados junto con el cable USB a una Raspberry Pi o CB1 para instalar y configurar Klipper. Ni siquiera necesita tener instalados los controladores paso a paso TMC para que se encienda.
the stuff in this video is way out of date, why not CB2 and Manta3E3Z?
Hello, thank you for commenting and suggesting the CB2 released last month. I had seen the Manta 3 E3Z but that was way after picking up 2 Manta M5P+CB1s last year. Let me know when you release a video on setting up your CB2 and Manta 3E3Z so I can learn from your experience.
Best of luck with your mods :)