Thank you for this great tutorial. I really appreciate the workaround @19min40sec with the two min_temp: -273.15 which avoids having to connect thermistors for the hot head and the bed.
Please do the part 3! It would be really helpful if you did it for the new Min printer (I know you have a zipped config on the discord but it would still be helpful to see). Thanks for everything you do!!
I have a raspberry pi 3 b and I am trying to build my own printer. Do I need to get a separate mainboard or can I just use the raspberry pi to run the motors, heaters, etc?
Which version of the raspberry Pi is this? Is it the Raspberry Pi Zero 2 W? If so, is it enough to run klipper, mainsail and a camera module through this? Or would I need a more powerful SBC to run the camera as well?
What type of mainboard should I use? I have a Artillery genius (1st gen) and I want to change the main board (i read the btt pico u used in the vid is for voron) Thanks in advance
Most any mainboard will work, the stock artillery board may even be able to support Klipper, I would check on youtube what other have used or if they just flash the stock board. The pico is not just for Voron it will work for many printers
Thanks for putting this together. Yes a part 3 would be great!
Nice tutorial. I'm rebulidiing my printer and had to refresh myself on how I installed Klipper. I would definately watch a part 3 if you made one.
part 3 should be nice and thank you for share this valuable information
Rolohaun taught me how to install klipper the first time and he's back at it again!
I'd like to see a Part 3 as well.
This is great video, thanks! And please go ahead with Part 3.
Thank you for this great tutorial. I really appreciate the workaround @19min40sec with the two min_temp: -273.15 which avoids having to connect thermistors for the hot head and the bed.
Part 3 would be nice
Please do the part 3! It would be really helpful if you did it for the new Min printer (I know you have a zipped config on the discord but it would still be helpful to see). Thanks for everything you do!!
I have a raspberry pi 3 b and I am trying to build my own printer. Do I need to get a separate mainboard or can I just use the raspberry pi to run the motors, heaters, etc?
you need to get a mainboard
Which version of the raspberry Pi is this? Is it the Raspberry Pi Zero 2 W? If so, is it enough to run klipper, mainsail and a camera module through this? Or would I need a more powerful SBC to run the camera as well?
pi zero 2 w, I do not know if I would run a camera off it but it might be ok. I have never tried
What type of mainboard should I use? I have a Artillery genius (1st gen) and I want to change the main board (i read the btt pico u used in the vid is for voron)
Thanks in advance
Most any mainboard will work, the stock artillery board may even be able to support Klipper, I would check on youtube what other have used or if they just flash the stock board. The pico is not just for Voron it will work for many printers